«Expérimentation et simulation du pliage de tôles H.L.E. : prévision du comportement en service des pièces pliées, Thèse de doctorat, ENSAM d'Angers, 2003. ,
«Optimisation du procédé de pliage sur presses de pièces entôles à haute limite d'élasticité, Thèse de doctorat, ENSAM d'Angers, 2005. ,
«Caractérisation des procédés de fabrication de pièces de sécurité automobile. Optimisation multi-objectifs de la mise en forme, Thèse de Doctorat, ENSAM d'Angers, 2007. ,
«The theoretical research on the blanking of a sheet material,» Bulletin of the Japan society mechanical engineers, pp.63-70, 1963. ,
« Crack formation in blanking and piercing,» International journal of production research, pp.265-275, 1963. ,
Elastoplastic analysis of plane-strain and axisymmetric flat punch indentation by the finite-element method, International Journal of Mechanical Sciences, vol.12, issue.4, pp.349-370, 1970. ,
DOI : 10.1016/0020-7403(70)90088-3
Deformation in the ductile fracture processes examined by the visioplasticity method, International Journal of Machine Tool Design and Research, vol.13, issue.4, pp.217-232, 1973. ,
DOI : 10.1016/0020-7357(73)90001-2
A Numerical Study on the Edge-Profile During Shearing of Bars Using the Principles of Linear Elastic Fracture Mechanics, Journal of Mechanical Design, vol.104, issue.3, pp.661-665, 1982. ,
DOI : 10.1115/1.3256402
A new approach to the mechanics of the blanking operation: Theoretical model and experimental verification, Journal of Mechanical Working Technology, vol.11, issue.2, pp.215-228, 1985. ,
DOI : 10.1016/0378-3804(85)90026-9
Finite-element analysis of the blanking process, Journal of Mechanical Working Technology, vol.18, issue.3, pp.269-282, 1989. ,
DOI : 10.1016/0378-3804(89)90086-7
Numerical investigations on sheet metal blanking with high speed deformation, Materials & Design, vol.30, issue.9, pp.3566-3571, 2009. ,
DOI : 10.1016/j.matdes.2009.02.028
Comparison between Lemaitre and Gurson damage models in crack growth simulation during blanking process, International Journal of Mechanical Sciences, vol.43, issue.12, pp.2769-2790, 2001. ,
DOI : 10.1016/S0020-7403(01)00070-4
Evaluation of ductile fracture models for different metals in blanking, Journal of Materials Processing Technology, vol.110, issue.3, pp.312-323, 2001. ,
DOI : 10.1016/S0924-0136(00)00892-X
Investigation on blanking of thin sheet metal using the ductile fracture criterion and its experimental verification, Journal of Materials Processing Technology, vol.155, issue.156, pp.1935-1942, 2004. ,
DOI : 10.1016/j.jmatprotec.2004.04.284
An integrated continuous???discontinuous approach towards damage engineering in sheet metal forming processes, Engineering Fracture Mechanics, vol.73, issue.7, pp.895-916, 2006. ,
DOI : 10.1016/j.engfracmech.2005.10.011
Analysis of blanking process using various damage criteria, Journal of Materials Processing Technology, vol.177, issue.1-3, pp.287-290, 2006. ,
DOI : 10.1016/j.jmatprotec.2006.04.021
Ductile fracture modeling of initiation and propagation in sheet-metal blanking processes, Journal of Materials Processing Technology, pp.1-2187, 2007. ,
DOI : 10.1016/j.jmatprotec.2006.11.179
Finite elements simulations of thin copper sheets blanking: Study of blanking parameters on sheared edge quality, Journal of Materials Processing Technology, vol.199, issue.1-3, pp.74-83, 2008. ,
DOI : 10.1016/j.jmatprotec.2007.08.034
Description of numerical techniques with the aim of predicting the sheet metal blanking process by FEM simulation, Journal of Materials Processing Technology, vol.209, issue.5, pp.2723-2734, 2009. ,
DOI : 10.1016/j.jmatprotec.2008.06.019
URL : https://hal.archives-ouvertes.fr/hal-00389279
The application of the formability utilization indicator for finite element modeling the ductile fracture during the material blanking process, Materia ls and Design, pp.3244-3252, 2010. ,
DOI : 10.1016/j.matdes.2010.02.012
Characterization of mechanically sheared edges of dual phase steels, Journal of Materials Processing Technology, vol.212, issue.6, pp.1209-1224, 2012. ,
DOI : 10.1016/j.jmatprotec.2012.01.006
Condition-based maintenance in punching/blanking of sheet metal, International Journal of Machine Tools and Manufacture, vol.48, issue.5, pp.589-598, 2008. ,
DOI : 10.1016/j.ijmachtools.2007.08.013
Material characterization of blanked parts in the vicinity of the cut edge using nanoindentation technique and inverse analysis, International Journal of Mechanical Sciences, vol.51, issue.11-12, pp.899-906, 2009. ,
DOI : 10.1016/j.ijmecsci.2009.09.032
Material fracture and burr formation in blanking results of FEM simulations and comparison with experiments, Journal of Materials Processing Technology, vol.59, issue.1-2, pp.68-78, 1996. ,
DOI : 10.1016/0924-0136(96)02288-1
«Contribution à la modélisation et à la simulation numérique du découpage des métaux, 2004. ,
Finite element simulation of the effect of clearance on the forming quality in the blanking process, Journal of Materials Processing Technology, vol.122, issue.2-3, pp.249-254, 2002. ,
DOI : 10.1016/S0924-0136(02)00056-0
«Analyse expérimentale du découpage de précision à grande vitesse d'alliages cuivreux en faible épaisseur, 2005. ,
Assessment of influence of some process parameters on sheet metal blanking, Journal of Materials Processing Technology, vol.102, issue.1-3, pp.249-259, 2000. ,
DOI : 10.1016/S0924-0136(99)00486-0
Static and dynamic blanking of steel of varying hardness, International Journal of Machine Tool Design and Research, vol.10, issue.2, pp.249-271, 1970. ,
DOI : 10.1016/0020-7357(70)90010-7
«Analysis of stresses in bar cropping,» chez The 15th Int, Mach. Tool Res. Conf, 1975. ,
An experimental and numerical study of a planar blanking process, Journal of Materials Processing Technology, vol.87, issue.1-3, pp.266-276, 1999. ,
DOI : 10.1016/S0924-0136(98)00362-8
«A survey of the slow and fast blanking of metals at ambient and high temperatures, chez Proc. Int. Conf. on Manufacturing Technology, 1967. ,
Size effects in the processing of thin metal sheets, Journal of Materials Processing Technology, vol.115, issue.1, pp.44-48, 2001. ,
DOI : 10.1016/S0924-0136(01)00770-1
Prediction of Ductile Fracture in Metal Blanking, Journal of Manufacturing Science and Engineering, vol.122, issue.3, 1999. ,
DOI : 10.1115/1.1285909
«Minimization in sheet metal working, pp.15-24, 1998. ,
«Etude de l'endommagement par la découpe des aciers dual phase pour application automobile, 2007. ,
Finite element simulation of the punching/blanking process using in-process characterisation of mild steel, Journal of Materials Processing Technology, vol.134, issue.3, pp.296-302, 2003. ,
DOI : 10.1016/S0924-0136(02)01113-5
A tension zone model of blanking and tearing of ductile metal plates, International Journal of Mechanical Sciences, vol.38, issue.3, pp.303-324, 1996. ,
DOI : 10.1016/0020-7403(95)00054-2
Some phenomenological and computational aspects of sheet metal blanking simulation, Journal of Materials Processing Technology, vol.128, issue.1-3, pp.256-265, 2002. ,
DOI : 10.1016/S0924-0136(02)00460-0
«Numerical modeling of ductile fracture in blanking, Thèse de doctorat, 1999. ,
3D modeling of shear-slitting process for aluminum alloys, Journal of Materials Processing Technology, vol.167, issue.1, pp.91-102, 2005. ,
DOI : 10.1016/j.jmatprotec.2004.08.031
Numerical simulation of fine-blanking process using a mixed finite element method, International Journal of Mechanical Sciences, vol.44, issue.7, pp.1309-1333 ,
DOI : 10.1016/S0020-7403(02)00052-8
Application of design of experiment technique for metal blanking processes optimization, M??canique & Industries, vol.4, issue.3, pp.1349-1361, 2003. ,
DOI : 10.1016/S1296-2139(03)00035-6
Finite-element simulation of the shear process using the element-kill method, Journal of Materials Processing Technology, vol.72, issue.1, pp.129-140, 1997. ,
DOI : 10.1016/S0924-0136(97)00144-1
A Continuous Damage Mechanics Model for Ductile Fracture, Journal of Engineering Materials and Technology, vol.107, issue.1, pp.83-89, 1985. ,
DOI : 10.1115/1.3225775
Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I???Yield Criteria and Flow Rules for Porous Ductile Media, Journal of Engineering Materials and Technology, vol.99, issue.1, pp.2-15, 1977. ,
DOI : 10.1115/1.3443401
On the ductile enlargement of voids in triaxial stress fields???, Journal of the Mechanics and Physics of Solids, vol.17, issue.3, pp.201-217, 1969. ,
DOI : 10.1016/0022-5096(69)90033-7
Criteria for ductile fracture and their applications, Journal of Mechanical Working Technology, vol.4, issue.1, pp.65-81, 1980. ,
DOI : 10.1016/0378-3804(80)90006-6
Finite element analysis on the effect of die clearance on shear planes in fine blanking, Journal of Materials Processing Technology, vol.130, issue.131, pp.462-468, 2002. ,
DOI : 10.1016/S0924-0136(02)00767-7
Finite element simulation of the shearing mechanism in the blanking of sheet metal, Journal of Materials Processing Technology, vol.139, issue.1-3, pp.64-70, 2003. ,
DOI : 10.1016/S0924-0136(03)00183-3
Fracture criteria identification using an inverse technique method and blanking experiment, International Journal of Mechanical Sciences, vol.44, issue.7, pp.1349-1361, 2002. ,
DOI : 10.1016/S0020-7403(02)00049-8
Prediction of Fineblanked surface characteristics using the finite element method (FEM), Journal of Materials Processing Technology, vol.198, issue.1-3, pp.391-398, 2008. ,
DOI : 10.1016/j.jmatprotec.2007.07.027
Crack deviation during trimming of aluminium automotive sheets, Journal of Materials Processing Technology, vol.210, issue.14, pp.1885-1897, 2010. ,
DOI : 10.1016/j.jmatprotec.2010.06.023
URL : https://hal.archives-ouvertes.fr/hal-00853817
«Introduction to Continuum Damage Mechanics, 1986. ,
DOI : 10.1115/1.3173053
A Criterion for Ductile Fracture by the Growth of Holes, Journal of Applied Mechanics, vol.35, issue.2, pp.363-371, 1968. ,
DOI : 10.1115/1.3601204
On the mechanisms of ductile failure in high-strength steels subjected to multi-axial stress-states, Journal of the Mechanics and Physics of Solids, vol.24, issue.2-3, pp.147-160, 1976. ,
DOI : 10.1016/0022-5096(76)90024-7
Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures, Engineering Fracture Mechanics, vol.21, issue.1, pp.31-48, 1985. ,
DOI : 10.1016/0013-7944(85)90052-9
The effect of stress triaxiality and strain-rate on the fracture characteristics of ductile metals, Journal of Materials Science, vol.4, issue.2, pp.453-461, 1996. ,
DOI : 10.1007/BF01139164
Damage mechanics, Comprehensive Structural Integrity éd, pp.686-783, 2003. ,
Ductile fracture models and their potential in local approach of fracture, Nuclear Engineering and Design, vol.105, issue.1, pp.97-111, 1987. ,
DOI : 10.1016/0029-5493(87)90234-2
Modeling of crack growth in round bars and plane strain specimens, International Journal of Solids and Structures, vol.38, issue.46-47, pp.46-47, 2001. ,
DOI : 10.1016/S0020-7683(01)00167-6
Anisotropic creep damage in the framework of continuum damage mechanics, Nuclear Engineering and Design, vol.79, issue.3, pp.309-319, 1984. ,
DOI : 10.1016/0029-5493(84)90046-3
The Continuous Damage Theory of Brittle Materials, Part 1: General Theory, Journal of Applied Mechanics, vol.48, issue.4, pp.809-815, 1981. ,
DOI : 10.1115/1.3157739
A CDM Approach of Ductile Damage with Plastic Compressibility, International Journal of Fracture, vol.32, issue.1, pp.51-75, 2006. ,
DOI : 10.1007/s10704-005-3061-5
Analysis of the cup-cone fracture in a round tensile bar, Acta Metallurgica, vol.32, issue.1, pp.157-169, 1984. ,
DOI : 10.1016/0001-6160(84)90213-X
Numerical modelling of ductile plastic damage in bulk metal forming, International Journal of Mechanical Sciences, vol.45, issue.2, pp.273-294, 2003. ,
DOI : 10.1016/S0020-7403(03)00051-1
Fracture prediction in plastic deformation processes, International Journal of Mechanical Sciences, vol.32, issue.1, pp.1-17, 1990. ,
DOI : 10.1016/0020-7403(90)90148-C
Fracture predicting in bulk metal forming, International Journal of Mechanical Sciences, vol.38, issue.4, pp.361-372, 1996. ,
DOI : 10.1016/0020-7403(95)00069-0
A new damage mechanics criterion for ductile fracture, Engineering Fracture Mechanics, vol.27, issue.4, pp.371-378, 1987. ,
DOI : 10.1016/0013-7944(87)90174-3
A new microvoid-damage model for ductile fracture, Engineering Fracture Mechanics, vol.25, issue.3, pp.377-384, 1986. ,
DOI : 10.1016/0013-7944(86)90133-5
A new approach for failure criterion for sheet metals, International Journal of Plasticity, vol.27, issue.3, pp.440-459, 2011. ,
DOI : 10.1016/j.ijplas.2010.07.004
Modeling of crack growth in ductile solids: a three-dimensional analysis, International Journal of Solids and Structures, vol.40, issue.26, pp.7357-7374, 2003. ,
DOI : 10.1016/j.ijsolstr.2003.08.022
Modeling of void growth in ductile solids: effects of stress triaxiality and initial porosity, Engineering Fracture Mechanics, vol.71, issue.3, pp.379-400, 2004. ,
DOI : 10.1016/S0013-7944(03)00114-0
Modeling of ductile fracture: Application of the mechanism-based concepts, International Journal of Solids and Structures, vol.44, issue.6, pp.1844-1862, 2007. ,
DOI : 10.1016/j.ijsolstr.2006.08.028
On fracture locus in the equivalent strain and stress triaxiality space, International Journal of Mechanical Sciences, vol.46, issue.1, pp.81-98, 2004. ,
DOI : 10.1016/j.ijmecsci.2004.02.006
On ductile fracture initiation toughness: Effects of void volume fraction, void shape and void distribution, International Journal of Solids and Structures, vol.42, issue.18-19, pp.5097-5117, 2005. ,
DOI : 10.1016/j.ijsolstr.2005.02.028
Modeling of ductile fracture: Significance of void coalescence, International Journal of Solids and Structures, vol.43, issue.20, pp.6277-6293, 2006. ,
DOI : 10.1016/j.ijsolstr.2005.08.008
Rupture mechanisms in combined tension and shear???Experiments, International Journal of Solids and Structures, vol.44, issue.6, pp.1768-1786, 2007. ,
DOI : 10.1016/j.ijsolstr.2006.09.031
Rupture mechanisms in combined tension and shear???Micromechanics, International Journal of Solids and Structures, vol.44, issue.17, pp.5481-5498, 2007. ,
DOI : 10.1016/j.ijsolstr.2007.01.010
A new model of metal plasticity and fracture with pressure and Lode dependence, International Journal of Plasticity, vol.24, issue.6, pp.1071-1096, 2008. ,
DOI : 10.1016/j.ijplas.2007.09.004
Numerical simulation of the localization behavior of hydrostatic-stress-sensitive metals, International Journal of Mechanical Sciences, vol.42, issue.11, pp.2147-2166, 2000. ,
DOI : 10.1016/S0020-7403(00)00002-3
A local viewpoint for evaluating the influence of stress triaxiality and Lode angle on ductile failure and hardening, International Journal of Plasticity, vol.26, issue.3, pp.348-371, 2010. ,
DOI : 10.1016/j.ijplas.2009.07.006
Experiments on stress-triaxiality dependence of material behavior of aluminum alloys, Mechanics of Materials, vol.42, issue.2, pp.207-217, 2010. ,
DOI : 10.1016/j.mechmat.2009.11.012
On stress-state dependent plasticity modeling: Significance of the hydrostatic stress, the third invariant of stress deviator and the non-associated flow rule, International Journal of Plasticity, vol.27, issue.2, pp.217-231, 2011. ,
DOI : 10.1016/j.ijplas.2010.05.004
Ductile fracture: Experiments and computations, International Journal of Plasticity, vol.27, issue.2, pp.147-180, 2011. ,
DOI : 10.1016/j.ijplas.2010.04.001
A ductile damage criterion at various stress triaxialities, International Journal of Plasticity, vol.24, issue.10, pp.1731-1755, 2008. ,
DOI : 10.1016/j.ijplas.2007.12.001
Formability prediction of high strength aluminum sheets, International Journal of Plasticity, vol.25, issue.12, pp.2269-2297, 2009. ,
DOI : 10.1016/j.ijplas.2009.02.005
Shear deformation of voids with contact modelled by internal pressure, International Journal of Mechanical Sciences, vol.50, issue.10-11, pp.1459-1465, 2008. ,
DOI : 10.1016/j.ijmecsci.2008.08.007
Modification of the Gurson Model for shear failure, European Journal of Mechanics - A/Solids, vol.27, issue.1, pp.1-17, 2008. ,
DOI : 10.1016/j.euromechsol.2007.08.002
César de Sá, «An assessment of isotropic constitutive models for ductile fracture under high and low stress triaxiality, International Journal of Plasticity, pp.1-230, 2012. ,
Lode Dependences for Isotropic Pressure-Sensitive Elastoplastic Materials, Journal of Applied Mechanics, vol.57, issue.3, pp.498-506, 1990. ,
DOI : 10.1115/1.2897051
Constitutive modeling of void shearing effect in ductile fracture of porous materials, Engineering Fracture Mechanics, vol.75, issue.11, pp.3343-3366, 2008. ,
DOI : 10.1016/j.engfracmech.2007.07.022
PLASTICITY ASPECTS OF FRACTURE, pp.47-225, 1971. ,
DOI : 10.1016/B978-0-12-449703-0.50007-2
Influence of voids on shear band instabilities under plane strain conditions, International Journal of Fracture, vol.6, issue.4, pp.389-407, 1981. ,
DOI : 10.1007/BF00036191
«On localization in ductile materials containing spherical voids, International Journal of Fracture, vol.18, pp.237-252, 1982. ,
Void Nucleation Effects in Biaxially Stretched Sheets, Journal of Engineering Materials and Technology, vol.102, issue.3, pp.249-256, 1980. ,
DOI : 10.1115/1.3224807
Ductile shear failure or plug failure of spot welds modelled by modified Gurson model, Engineering Fracture Mechanics, vol.77, issue.7, pp.1031-1047, 2010. ,
DOI : 10.1016/j.engfracmech.2010.02.031
Prediction of ductile fracture initiation using micromechanical analysis, Engineering Fracture Mechanics, vol.71, issue.4-6, pp.813-827, 2004. ,
DOI : 10.1016/S0013-7944(03)00013-4
Void growth in 6061-aluminum alloy under triaxial stress state, Materials Science and Engineering: A, vol.341, issue.1-2, pp.35-42, 2003. ,
DOI : 10.1016/S0921-5093(02)00073-4
«Damage percolation during stretch flange forming of aluminum alloy sheet, Journal of the Mechanics and Physics of Solids, vol.53, pp.2692-2717, 2005. ,
On the numerical integration of a class of pressure-dependent plasticity models, International Journal for Numerical Methods in Engineering, vol.32, issue.7, pp.1395-1416, 1987. ,
DOI : 10.1002/nme.1620240713
Explicit consistent tangent moduli with a return mapping algorithm for pressure-dependent elastoplasticity models, Computer Methods in Applied Mechanics and Engineering, vol.121, issue.1-4, pp.29-44, 1995. ,
DOI : 10.1016/0045-7825(94)00707-T
Modelling of ductile fracture initiation in strength mismatched welded joint, Engineering Fracture Mechanics, vol.75, issue.11, pp.3499-3510, 2008. ,
DOI : 10.1016/j.engfracmech.2007.04.026
Damage parameter identification by a periodic homogenization approach, Computational Materials Science, vol.25, issue.1-2, pp.159-165, 2002. ,
DOI : 10.1016/S0927-0256(02)00260-4
URL : https://hal.archives-ouvertes.fr/hal-00460616
Interaction between anisotropic plastic deformation and damage evolution in Al 2198 sheet metal, Engineering Fracture Mechanics, vol.77, issue.17, pp.3501-3518, 2010. ,
DOI : 10.1016/j.engfracmech.2010.08.021
URL : https://hal.archives-ouvertes.fr/hal-00542469
Void growth and coalescence in porous plastic solids, International Journal of Solids and Structures, vol.24, issue.8, pp.835-853, 1988. ,
DOI : 10.1016/0020-7683(88)90051-0
Honig, «Verification of the transferability of micromechanical parameters by cell model calculation with visco-plastic materials ,
«Cell model for nonlinear fracture analysis I. Micromechanics calibration, International Journal of Fracture, vol.89, issue.4, pp.355-373, 1998. ,
DOI : 10.1023/A:1007421420901
On the predictive capabilities of the shear modified Gurson and the modified Mohr???Coulomb fracture models over a wide range of stress triaxialities and Lode angles, Journal of the Mechanics and Physics of Solids, vol.59, issue.7, pp.1374-1394, 2011. ,
DOI : 10.1016/j.jmps.2011.04.006
URL : https://hal.archives-ouvertes.fr/hal-00620573
Micromechanical modelling of reactor pressure vessel steel, Materials & Design (1980-2015), vol.36, pp.258-274, 2012. ,
DOI : 10.1016/j.matdes.2011.10.027
Hybrid experimental???numerical analysis of basic ductile fracture experiments for sheet metals, International Journal of Solids and Structures, vol.47, issue.9, pp.1130-1143, 2010. ,
DOI : 10.1016/j.ijsolstr.2009.12.011
URL : https://hal.archives-ouvertes.fr/hal-00620568
Effects of the stress state on plasticity and ductile failure of an aluminum 5083 alloy, International Journal of Plasticity, vol.25, issue.12, pp.2366-2382, 2009. ,
DOI : 10.1016/j.ijplas.2009.03.006
Crack-growth criteria and non-linear fracture mechanics, Journal of the Mechanics and Physics of Solids, vol.19, issue.6, pp.407-418, 1971. ,
DOI : 10.1016/0022-5096(71)90008-1
An experimental and numerical study of a planar blanking process, Journal of Materials Processing Technology, vol.87, issue.1-3, pp.266-276, 1999. ,
DOI : 10.1016/S0924-0136(98)00362-8
Fineblanking of high strength steels: Control of material properties for tool life, Journal of Materials Processing Technology, vol.211, issue.4, pp.717-728, 2011. ,
DOI : 10.1016/j.jmatprotec.2010.12.005