A. Acharya, A nonlinear generalization of the Koiter???Sanders???Budiansky bending strain measure, International Journal of Solids and Structures, vol.37, issue.39, pp.5517-5528, 2000.
DOI : 10.1016/S0020-7683(99)00231-0

A. Acharya and A. J. Beaudoin, Grain-size effect in viscoplastic polycrystals at moderate strains, Journal of the Mechanics and Physics of Solids, vol.48, issue.10, pp.2213-2230, 2000.
DOI : 10.1016/S0022-5096(00)00013-2

A. Acharya, H. Tang, S. Saigal, and J. L. Bassani, On boundary conditions and plastic strain-gradient discontinuity in lower-order gradient plasticity, Journal of the Mechanics and Physics of Solids, vol.52, issue.8, pp.1793-1826, 2004.
DOI : 10.1016/j.jmps.2004.02.005

E. C. Aifantis, On the Microstructural Origin of Certain Inelastic Models, Journal of Engineering Materials and Technology, vol.106, issue.4, pp.326-330, 1984.
DOI : 10.1115/1.3225725

E. C. Aifantis, The physics of plastic deformation, International Journal of Plasticity, vol.3, issue.3, pp.211-247, 1987.
DOI : 10.1016/0749-6419(87)90021-0

K. E. Aifantis, W. A. Soer, J. T. De-hosson, and J. R. Willis, Interfaces within strain gradient plasticity: Theory and experiments, Acta Materialia, vol.54, issue.19, pp.5077-5085, 2006.
DOI : 10.1016/j.actamat.2006.06.040

K. E. Aifantis and J. R. Willis, The role of interfaces in enhancing the yield strength of composites and polycrystals, Journal of the Mechanics and Physics of Solids, vol.53, issue.5, pp.1047-1070, 2005.
DOI : 10.1016/j.jmps.2004.12.003

R. K. Abu-al-rub, G. Z. Voyiadjis, and D. J. Bammann, A thermodynamic based higher-order gradient theory for size dependent plasticity, International Journal of Solids and Structures, vol.44, issue.9, pp.2888-2923, 2007.
DOI : 10.1016/j.ijsolstr.2006.08.034

R. Amargier, S. Fouvry, L. Chambon, C. Schwob, and C. Poupon, Stress gradient effect on crack initiation in fretting using a multiaxial fatigue framework, International Journal of Fatigue, vol.32, issue.12, pp.1904-1912, 2010.
DOI : 10.1016/j.ijfatigue.2010.06.004

L. Anand, M. E. Gurtin, S. P. Lele, and C. Gething, A one-dimensional theory of strain-gradient plasticity: Formulation, analysis, numerical results, Journal of the Mechanics and Physics of Solids, vol.53, issue.8, pp.1789-1826, 2005.
DOI : 10.1016/j.jmps.2005.03.003

J. A. Araujo, L. Susmel, D. Taylor, J. C. Ferro, and E. N. Mamiya, On the use of the Theory of Critical Distances and the Modified W??hler Curve Method to estimate fretting fatigue strength of cylindrical contacts, International Journal of Fatigue, vol.29, issue.1, pp.95-107, 2007.
DOI : 10.1016/j.ijfatigue.2006.02.041

M. F. Ashby, The deformation of plastically non-homogeneous materials, Philosophical Magazine, vol.245, issue.170, pp.399-424, 1970.
DOI : 10.1016/0001-6160(64)90034-3

M. F. Ashby, The deformation of plastically non-homogeneous alloys. Strengthening Methods of Crystals, pp.137-192, 1971.

M. Atkinson, Further analysis of the size effect in indentation hardness tests of some metals, Journal of Materials Research, vol.35, issue.11, pp.2908-2915, 1995.
DOI : 10.1520/JTE12588J

D. S. Balint, V. S. Deshpande, A. Needleman, and E. Van-der-giessen, Discrete dislocation plasticity analysis of the grain size dependence of the flow strength of polycrystals, International Journal of Plasticity, vol.24, issue.12, pp.2149-2172, 2008.
DOI : 10.1016/j.ijplas.2007.08.005

P. Ballard, K. D. Van, A. Deperrois, and Y. V. Papadopoulos, HIGH CYCLE FATIGUE AND A FINITE ELEMENT ANALYSIS, Fatigue & Fracture of Engineering Materials and Structures, vol.2, issue.4, pp.397-411, 1995.
DOI : 10.1016/0093-6413(77)90007-6

A. Banvillet, T. Palin-luc, and S. Lasserre, A volumetric energy based high cycle multiaxial fatigue citerion, International Journal of Fatigue, vol.25, issue.8, pp.755-769, 2003.
DOI : 10.1016/S0142-1123(03)00048-3
URL : https://hal.archives-ouvertes.fr/hal-01372060

L. Bardella, A deformation theory of strain gradient crystal plasticity that accounts for geometrically necessary dislocations, Journal of the Mechanics and Physics of Solids, vol.54, issue.1, pp.128-160, 2006.
DOI : 10.1016/j.jmps.2005.08.003

L. Bardella, Some remarks on the strain gradient crystal plasticity modelling, with particular reference to the material length scales involved, International Journal of Plasticity, vol.23, issue.2, pp.296-322, 2007.
DOI : 10.1016/j.ijplas.2006.05.004

S. J. Basinski and Z. S. Basinski, Chapter1, the nature of the cold worked state. Recrystallization, Grain Growth and Textures, A.S.M, vol.26, pp.1-44, 1966.

S. Basseville and F. Feyel, Méthodes de résolution en éléments finis (Enseignement spécialisé "Eléments Finis" S3733-S3735) Ecole Nationale Suprieure des Mines de Paris, 2005.

C. Bathias and J. Bailon, La fatigue des matériaux et des structures, 1997.

M. R. Begley and J. W. Hutchinson, The mechanics of size-dependent indentation, Journal of the Mechanics and Physics of Solids, vol.46, issue.10, pp.2049-2068, 1998.
DOI : 10.1016/S0022-5096(98)00018-0

A. Benallal and C. Comi, On interfacial properties in gradient damaging continua, Comptes Rendus M??canique, vol.333, issue.4, pp.319-324, 2005.
DOI : 10.1016/j.crme.2005.02.001

A. Benallal, C. A. Fudoli, and W. S. Venturini, An implicit BEM formulation for gradient plasticity and localization phenomena, International Journal for Numerical Methods in Engineering, vol.13, issue.8, pp.53-81853, 2001.
DOI : 10.1002/nme.365

A. Benallal and J. Marigo, Bifurcation and stability issues in gradient theories with softening. Modelling and Simulation in, Materials Science and Engineering, vol.15, issue.1, pp.283-295, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00551073

A. Benallal, V. Tvergaard, M. A. Biot, E. Bittencourt, A. Needleman et al., Nonlocal continuum effects on bifurcation in the plane strain tension-compression test, Journal of the Mechanics and Physics of Solids, pp.741-770281, 1965.
DOI : 10.1016/0022-5096(95)00002-Z

U. Borg and N. A. Fleck, Strain gradient effects in surface roughening, Modelling and Simulation in Materials Science and Engineering, vol.15, issue.1, pp.1-12, 2007.
DOI : 10.1088/0965-0393/15/1/S01

U. Borg, C. F. Niordson, and J. W. Kysar, Size effects on void growth in single crystals with distributed voids, International Journal of Plasticity, vol.24, issue.4, pp.688-701, 2008.
DOI : 10.1016/j.ijplas.2007.07.015

B. Bourdin, G. A. Francfort, and J. Marigo, Numerical experiments in revisited brittle fracture, Journal of the Mechanics and Physics of Solids, vol.48, issue.4, pp.797-826, 2000.
DOI : 10.1016/S0022-5096(99)00028-9

A. Brand, Nouvelle méthode de calcul en fatigue faisant intervenir le gradient de contraintes

A. Brand and R. Sutterlin, Calcul des piéces a la fatigue. méthode du gradient, Senlis : Editions du CETIM, 1980.

N. Caillet, Prise en compte des spécificités des pieces forgées en fatigue illimitée, 2007.

P. Cermelli and M. E. Gurtin, Geometrically necessary dislocations in viscoplastic single crystals and bicrystals undergoing small deformations, International Journal of Solids and Structures, vol.39, issue.26, pp.6281-6309, 2002.
DOI : 10.1016/S0020-7683(02)00491-2

S. H. Chen and T. C. Wang, A new deformation theory with strain gradient effects, International Journal of Plasticity, vol.18, issue.8, pp.971-995, 2002.
DOI : 10.1016/S0749-6419(01)00020-1

B. Crossland, Effect of large hydrostatic pressures on the torsional fatigue strength of an alloy steel, International Conference on Fatigue of Metals, pp.138-149, 1956.

H. Dai and D. M. Parks, Geometrically necessary dislocation density and scale dependent crystal plasticity, Proceeding of Plasticity 97, pp.17-18, 1997.

K. Dangvan, G. Cailletaud, J. Flavenot, A. Le-douaron, and H. Lieurade, Amorcage des fissure de fatigue sous solicitations complexes, pp.301-337, 1984.

R. De-borst, M. G. Geers, R. H. Peerlings, and A. Benallal, Some remarks on gradient and nonlocal damage theories, Damage Mechanics in Engineering Materials, volume 46 of Studies in Applied Mechanics, pp.223-236, 1998.
DOI : 10.1016/S0922-5382(98)80044-5

R. De-borst and H. B. Muhlhaus, Gradient-dependent plasticity: Formulation and algorithmic aspects, International Journal for Numerical Methods in Engineering, vol.137, issue.3, pp.521-539, 1992.
DOI : 10.1002/nme.1620350307

F. M. De-sciarra, A general theory for nonlocal softening plasticity of integral-type, International Journal of Plasticity, vol.24, issue.8, pp.1411-1439, 2008.
DOI : 10.1016/j.ijplas.2007.09.011

F. M. De-sciarra, Novel variational formulations for nonlocal plasticity, International Journal of Plasticity, vol.25, issue.2, pp.302-331, 2009.
DOI : 10.1016/j.ijplas.2008.02.002

V. S. Deshpande, A. Needleman, and E. Van-der-giessen, Plasticity size effects in tension and compression of single crystals, Journal of the Mechanics and Physics of Solids, vol.53, issue.12, pp.2661-2691, 2005.
DOI : 10.1016/j.jmps.2005.07.005

G. Duvaut and J. L. Lions, Les inéquations en m´ecanique et en physique, 1972.

H. D. Espinosa, M. Panico, S. Berbenni, and K. W. Schwarz, Discrete dislocation dynamics simulations to interpret plasticity size and surface effects in freestanding FCC thin films, International Journal of Plasticity, vol.22, issue.11, pp.2091-2117, 2006.
DOI : 10.1016/j.ijplas.2006.01.007
URL : https://hal.archives-ouvertes.fr/hal-00128371

R. Ferre, S. Fouvry, B. Berthel, and J. , Ruiz-sabariego. Stress gradient effect on the crack nucleation process of a ti-6al-4v titanium alloy under fretting loading: comparison between nonlocal fatigue approaches, International Journal of Fatigue, issue.0, 2013.

W. N. Findley, J. J. Coleman, and B. C. Hanley, Theory for combined bending and torsion fatigue with data for sae 4340 steel, International Conference on Fatigue of Metals, I. Mech. E, pp.150-157, 1956.

J. Flavenot and N. Skally, L'épaisseur de couche critique ou une nouvelle approche du calcul en fatigue a long terme des structures soumises a des solicitations multiaxialles en présence de gradient de contraintes, Rev. Méca. Matériaux et Electricité, vol.397, pp.15-25, 1983.

N. A. Fleck and J. W. Hutchinson, A phenomenological theory for strain gradient effects in plasticity, Journal of the Mechanics and Physics of Solids, vol.41, issue.12, pp.1825-1857, 1993.
DOI : 10.1016/0022-5096(93)90072-N

N. A. Fleck and J. W. Hutchinson, Strain Gradient Plasticity, Advances in Applied Mechanics Journal, pp.295-361, 1997.
DOI : 10.1016/S0065-2156(08)70388-0

N. A. Fleck and J. W. Hutchinson, A reformulation of strain gradient plasticity, Journal of the Mechanics and Physics of Solids, vol.49, issue.10, pp.2245-2271, 2001.
DOI : 10.1016/S0022-5096(01)00049-7

N. A. Fleck, G. M. Muller, M. F. Ashby, and J. W. Hutchinson, Strain Gradient Plasticity, Acta Metallurgica et Materialia Journal of the Mechanics and Physics of Solids, vol.42, issue.571, pp.475-487161, 1994.
DOI : 10.1016/S0065-2156(08)70388-0

N. A. Fleck and J. R. Willis, A mathematical basis for strain-gradient plasticity theory. Part II: Tensorial plastic multiplier, Journal of the Mechanics and Physics of Solids, vol.57, issue.7, pp.1045-1057, 2009.
DOI : 10.1016/j.jmps.2009.03.007

M. Fogue, Critere de fatigue a longue durée de vie pour des états multiaxiaux de contraintes sinusoidales en phase et hors phase, These de l'Institut National des Sciences Appliquées (INSA) de Lyon, 1987.

M. Fogue and J. Bahuaud, Fatigue multiaxiale a durée de vie illimitée, 7eme Congres Franais de Mécanique, pp.30-31, 1985.

S. Forest, J. M. Cardona, and R. Sievert, Thermoelasticity of second-grade media, 2000.
DOI : 10.1007/0-306-46946-4_12
URL : https://hal.archives-ouvertes.fr/hal-01113486

G. Francfort and A. Mielke, Existence results for a class of rate-independent material models with nonconvex elastic energies, Journal f??r die reine und angewandte Mathematik (Crelles Journal), vol.2006, issue.595, pp.55-91, 2006.
DOI : 10.1515/CRELLE.2006.044

G. A. Francfort and J. Marigo, Revisiting brittle fracture as an energy minimization problem, Journal of the Mechanics and Physics of Solids, vol.46, issue.8, pp.1319-1342, 1998.
DOI : 10.1016/S0022-5096(98)00034-9

P. Fredriksson and P. Gudmundson, Size-dependent yield strength of thin films, International Journal of Plasticity, vol.21, issue.9, pp.1834-1854, 2005.
DOI : 10.1016/j.ijplas.2004.09.005

P. Fredriksson and P. Gudmundson, Competition between interface and bulk dominated plastic deformation in strain gradient plasticity, Modelling and Simulation in Materials Science and Engineering, vol.15, issue.1, pp.61-69, 2007.
DOI : 10.1088/0965-0393/15/1/S06

M. Frémond, Contact unilatéral avec adhérence. une théorie du premier gradient, volume CISM Course 304, 1985.

M. Frémond, Shape Memory Alloy, CISM Course, vol.351, pp.3-68, 1996.
DOI : 10.1007/978-3-7091-4348-3_1

M. Frémond and B. Nedjar, Damage, gradient of damage and principle of virtual power, International Journal of Solids and Structures, vol.33, issue.8, pp.1083-1103, 1996.
DOI : 10.1016/0020-7683(95)00074-7

H. Gao and Y. Huang, Taylor-based nonlocal theory of plasticity, International Journal of Solids and Structures, vol.38, issue.15, pp.2615-2637, 2001.
DOI : 10.1016/S0020-7683(00)00173-6

H. Gao, Y. Huang, W. D. Nix, and J. W. Hutchinson, Mechanism-based strain gradient plasticity? I. Theory, Journal of the Mechanics and Physics of Solids, vol.47, issue.6, pp.1239-1263, 1999.
DOI : 10.1016/S0022-5096(98)00103-3

P. Germain, Cours de mécanique des milieux continus, 1973.

A. Giacomini and A. Musesti, Two-scale homogenization for a model in strain gradient plasticity, ESAIM: Control, Optimisation and Calculus of Variations, 2011.
DOI : 10.1051/cocv/2010036

J. R. Greer, W. C. Oliver, and W. D. Nix, Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients, Acta Materialia, vol.53, issue.6, pp.1821-1830, 2005.
DOI : 10.1016/j.actamat.2004.12.031

S. Groh, E. B. Marin, M. F. Horstemeyer, and H. M. Zbib, Multiscale modeling of the plasticity in an aluminum single crystal, International Journal of Plasticity, vol.25, issue.8, pp.1456-1473, 2009.
DOI : 10.1016/j.ijplas.2008.11.003

P. Gudmundson, A unified treatment of strain gradient plasticity, Journal of the Mechanics and Physics of Solids, vol.52, issue.6, pp.1379-1406, 2004.
DOI : 10.1016/j.jmps.2003.11.002

A. L. Gurson, Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I???Yield Criteria and Flow Rules for Porous Ductile Media, Journal of Engineering Materials and Technology, vol.99, issue.1, pp.2-15, 1977.
DOI : 10.1115/1.3443401

M. E. Gurtin, Generalized Ginzburg-Landau and Cahn-Hilliard equations based on a microforce balance, Physica D: Nonlinear Phenomena, vol.92, issue.3-4, pp.3-4178, 1996.
DOI : 10.1016/0167-2789(95)00173-5

M. E. Gurtin, A gradient theory of single-crystal viscoplasticity that accounts for geometrically necessary dislocations, Journal of the Mechanics and Physics of Solids, vol.50, issue.1, pp.5-32, 2002.
DOI : 10.1016/S0022-5096(01)00104-1

M. E. Gurtin, A gradient theory of small-deformation isotropic plasticity that accounts for the Burgers vector and for dissipation due to plastic spin, Journal of the Mechanics and Physics of Solids, vol.52, issue.11, pp.2545-2568, 2004.
DOI : 10.1016/j.jmps.2004.04.010

M. E. Gurtin, A theory of grain boundaries that accounts automatically for grain misorientation and grain-boundary orientation, Journal of the Mechanics and Physics of Solids, vol.56, issue.2, pp.640-662, 2008.
DOI : 10.1016/j.jmps.2007.05.002

M. E. Gurtin and L. Anand, A theory of strain-gradient plasticity for isotropic, plastically irrotational materials. Part I: Small deformations, Journal of the Mechanics and Physics of Solids, vol.53, issue.7, pp.1624-1649, 2005.
DOI : 10.1016/j.jmps.2004.12.008

M. E. Gurtin and L. Anand, Thermodynamics applied to gradient theories involving the accumulated plastic strain: The theories of Aifantis and Fleck and Hutchinson and their generalization, Journal of the Mechanics and Physics of Solids, vol.57, issue.3, pp.405-421, 2009.
DOI : 10.1016/j.jmps.2008.12.002

M. E. Gurtin and A. Needleman, Boundary conditions in small-deformation, single-crystal plasticity that account for the Burgers vector, Journal of the Mechanics and Physics of Solids, vol.53, issue.1, pp.1-31, 2005.
DOI : 10.1016/j.jmps.2004.06.006

M. S. De-guzman, G. Neubauer, P. Flinn, and W. D. Nix, The Role of Indentation Depth on the Measured Hardness of Materials, MRS Proceedings, pp.613-618, 1993.
DOI : 10.1557/JMR.1986.0601

B. Halphen and Q. S. Nguyen, Sur les matériaux standard généralisés, Journal Mecanique, vol.14, pp.1-37, 1975.

M. A. Haque and M. T. Saif, Strain gradient effect in nanoscale thin films, Acta Materialia, vol.51, issue.11, pp.3053-3061, 2003.
DOI : 10.1016/S1359-6454(03)00116-2

H. Henry and H. Levine, Dynamic Instabilities of Fracture under Biaxial Strain Using a Phase Field Model, Physical Review Letters, vol.93, issue.10, p.105504, 2004.
DOI : 10.1103/PhysRevLett.93.105504

R. Hill, A general theory of uniqueness and stability in elastic-plastic solids, Journal of the Mechanics and Physics of Solids, vol.6, issue.3, pp.236-249, 1958.
DOI : 10.1016/0022-5096(58)90029-2

Y. Huang, H. Gao, W. D. Nix, and J. W. Hutchinson, Mechanism-based strain gradient plasticity???II. Analysis, Journal of the Mechanics and Physics of Solids, vol.48, issue.1, pp.99-128, 2000.
DOI : 10.1016/S0022-5096(99)00022-8

J. W. Hutchinson, Plasticity at the micron scale, International Journal of Solids and Structures, vol.37, issue.1-2, pp.225-238, 2000.
DOI : 10.1016/S0020-7683(99)00090-6

M. I. Idiart, V. S. Deshpande, N. A. Fleck, and J. R. Willis, Size effects in the bending of thin foils, International Journal of Engineering Science, vol.47, issue.11-12, pp.11-121251, 2009.
DOI : 10.1016/j.ijengsci.2009.06.002

Y. Y. Jiang, An Experimental Study of Inhomogeneous Cyclic Plastic Deformation, Journal of Engineering Materials and Technology, vol.123, issue.3, pp.274-280, 2001.
DOI : 10.1115/1.1373652

D. M. Kochmann and K. C. Le, Dislocation pile-ups in bicrystals within continuum dislocation theory, International Journal of Plasticity, vol.24, issue.11, pp.2125-2147, 2008.
DOI : 10.1016/j.ijplas.2008.03.007

D. Kostas, V. Deshpande, and N. A. Fleck, Discrete dislocation dynamics and strain gradient formulations: a way to modelsize effects in plasticity, Seminar at LMS, 2010.

T. Liebe, P. Steinmann, and A. Benallal, Theoretical and computational aspects of a thermodynamically consistent framework for geometrically linear gradient damage, Computer Methods in Applied Mechanics and Engineering, vol.190, issue.49-50, pp.6555-6576, 2001.
DOI : 10.1016/S0045-7825(01)00250-X

Z. L. Liu, X. M. Liu, Z. Zhuang, and X. C. You, A multi-scale computational model of crystal plasticity at submicron-to-nanometer scales, International Journal of Plasticity, vol.25, issue.8, pp.1436-1455, 2009.
DOI : 10.1016/j.ijplas.2008.11.006

E. Lorentz and S. Andrieux, A variational formulation for nonlocal damage models, International Journal of Plasticity, vol.15, issue.2, pp.119-138, 2003.
DOI : 10.1016/S0749-6419(98)00057-6

E. Lorentz and A. Benallal, Gradient constitutive relations: numerical aspects and application to gradient damage, Computer Methods in Applied Mechanics and Engineering, vol.194, issue.50-52, pp.5191-5220, 2005.
DOI : 10.1016/j.cma.2004.12.016
URL : https://hal.archives-ouvertes.fr/hal-00089126

Q. Ma and D. R. Clarke, Size dependent hardness of silver single crystals, Journal of Materials Research, vol.889, issue.04, pp.853-863, 1995.
DOI : 10.1557/JMR.1986.0601

A. Mainik and A. Mielke, Global Existence for Rate-Independent Gradient Plasticity at Finite Strain, Journal of Nonlinear Science, vol.50, issue.3???4
DOI : 10.1007/s00332-008-9033-y

M. H. Maitournam, Mcanique des structures anlastiques: Comportement, chargements cycliques et fatigue, Laboratoire de Mcanique des Solides (LMS) -Ecole Polytechnique, 2010.

M. Maitournam, V. K. Dang, and J. Flavenot, Fatigue Design of Notched Components with Stress Gradients and Cyclic Plasticity, Advanced Engineering Materials, vol.26, issue.9, pp.750-754, 2009.
DOI : 10.1002/adem.200900045
URL : https://hal.archives-ouvertes.fr/hal-00487509

M. Maitournam, B. Pommier, and J. Thomas, D??termination de la r??ponse asymptotique d'une structure an??lastique sous chargement thermom??canique cyclique, Comptes Rendus M??canique, vol.330, issue.10, pp.703-711, 2002.
DOI : 10.1016/S1631-0721(02)01516-4

J. Mandel, Cours de mécanique des milieux continus, 1966.

. Ch and . Massonnet, Le dimensionnement des pices de machines soumises la fatigue. contribution exprimentale l'tude de l'effet de l'chelle et des entailles, Revue Universelle des Mines, vol.9, pp.203-222, 1955.

. Ch and . Massonnet, The effect of size, shape and grain size on the fatigue strength of medium carbon steel, ASTM (American Society for Testing and Materials International), pp.954-978, 1956.

G. A. Maugin and W. Muschik, Thermodynamics with Internal Variables. Part I. General Concepts, Journal of Non-Equilibrium Thermodynamics, vol.19, issue.3, pp.217-249, 1994.
DOI : 10.1515/jnet.1994.19.3.217

T. Mayama, T. Ohashi, and R. Kondou, Geometrically necessary dislocation structure organization in FCC bicrystal subjected to cyclic plasticity, International Journal of Plasticity, vol.25, issue.11, pp.2122-2140, 2009.
DOI : 10.1016/j.ijplas.2009.02.001

K. W. Mcelhaney, J. J. Vlassak, and W. D. Nix, Determination of indenter tip geometry and indentation contact area for depth-sensing indentation experiments, Journal of Materials Research, vol.53, issue.05, pp.1300-1306, 1998.
DOI : 10.1557/JMR.1998.0185

R. D. Mindlin, Micro-structure in linear elasticity, Archive for Rational Mechanics and Analysis, vol.16, issue.1, pp.51-78, 1964.
DOI : 10.1007/BF00248490

H. F. Moore and D. Morkovin, Third progress report on the effect of size of specimen on fatigue strength of three types of steel, ASTM (American Society for Testing and Materials International ), number 44, pp.137-158, 1944.

J. J. Moreau, Sur les lois de frottement, de plasticité et de viscosité, C. R. Acad. Sciences, vol.271, pp.608-611, 1970.

F. Morel and T. Palin-luc, A non-local theory devoted to high cycle multiaxial fatigue, Int J Fatigue, vol.25, pp.649-65, 2002.

A. K. Nair, E. Parker, P. Gaudreau, D. Farkas, and R. D. Kriz, Size effects in indentation response of thin films at the nanoscale: A molecular dynamics study, International Journal of Plasticity, vol.24, issue.11, pp.2016-2031, 2008.
DOI : 10.1016/j.ijplas.2008.01.007

A. Needleman, V. Tvergaard, and J. W. Hutchinson, Void growth in plastic solids. in "topics in fracture and fatigue, pp.145-178, 1992.

K. Ngargueudedjim, B. Weber, and J. Robert, Accounting for stress gradient effect in multiaxial fatigue criteria, Sixth International Conference on Biaxial/Multiaxial Fatigue and Fracture. ESIS, pp.143-50, 2001.

Q. S. Nguyen, Standard gradient models and gradient plasticity. (Unplished manuscript: A revisit of Q.S. Nguyen, 2005.

Q. S. Nguyen, Stability and Nonlinear Solid Mechanics, 2000.
URL : https://hal.archives-ouvertes.fr/hal-00105248

Q. S. Nguyen, Variational principles in the theory of gradient plasticity, Comptes Rendus M??canique, vol.339, issue.12, pp.743-750, 2011.
DOI : 10.1016/j.crme.2011.08.002
URL : https://hal.archives-ouvertes.fr/hal-00620710

Q. S. Nguyen and S. Andrieux, The non-local generalized standard approach: a consistent gradient theory, Comptes Rendus M??canique, vol.333, issue.2, pp.139-145, 2005.
DOI : 10.1016/j.crme.2004.09.010
URL : https://hal.archives-ouvertes.fr/hal-00105139

L. Nicola, E. Van-der-giessen, and A. Needleman, Discrete dislocation analysis of size effects in thin films, Journal of Applied Physics, vol.93, issue.10, pp.5920-5928, 2003.
DOI : 10.1063/1.1566471

C. Nilsson, On nonlocal rate-independent plasticity, International Journal of Plasticity, vol.14, issue.6, pp.551-575, 1998.
DOI : 10.1016/S0749-6419(98)00030-8

C. F. Niordson and J. W. Hutchinson, On lower order strain gradient plasticity theories, European Journal of Mechanics - A/Solids, vol.22, issue.6, pp.771-778, 2003.
DOI : 10.1016/S0997-7538(03)00069-X

W. D. Nix, Mechanical properties of thin films, Metallurgical Transactions A, vol.130, issue.11, pp.2217-2245, 1988.
DOI : 10.1007/BF02666659

W. D. Nix and H. Gao, Indentation size effects in crystalline materials: A law for strain gradient plasticity, Journal of the Mechanics and Physics of Solids, vol.46, issue.3, pp.411-425, 1998.
DOI : 10.1016/S0022-5096(97)00086-0

W. D. Nix, J. R. Greer, G. Feng, and E. T. Lilleodden, Deformation at the nanometer and micrometer length scales: Effects of strain gradients and dislocation starvation, Thin Solid Films, vol.515, issue.6, pp.3152-3157, 2006.
DOI : 10.1016/j.tsf.2006.01.030

J. F. Nye, Some geometrical relations in dislocated crystals, Acta Metallurgica, vol.1, issue.2, pp.153-162, 1953.
DOI : 10.1016/0001-6160(53)90054-6

T. Ohashi, Three dimensional structures of the geometrically necessary dislocations in matrix-inclusion systems under uniaxial tensile loading, <ce:title>Recent Advances in Multiscale Modeling of Plasticity</ce:title>, pp.1093-1109, 2004.
DOI : 10.1016/j.ijplas.2003.10.005

T. Ohashi, Crystal plasticity analysis of dislocation emission from micro voids, <ce:title>Plasticity of Heterogeneous Materi- als</ce:title>, pp.2071-2088, 2005.
DOI : 10.1016/j.ijplas.2005.03.018

T. Ohashi, M. Kawamukai, and H. Zbib, A multiscale approach for modeling scale-dependent yield stress in polycrystalline metals, International Journal of Plasticity, vol.23, issue.5, pp.897-914, 2007.
DOI : 10.1016/j.ijplas.2006.10.002

T. Palin-luc, Fatigue multiaxiale d'une fonte GS sous sollicitations combinées d'amplitude variable, 1996.

T. Palin-luc, Stress gradient and size effects in multiaxial fatigue, Materials Week, 2000.

T. Palin-luc, Approche énergétique et volumique de la fatigue multiaxiale des mtaux. Habilitation diriger des recherches (hdr), 2004.

T. Palin-luc and S. Lasserre, An energy based criterion for high cycle multiaxial fatigue, European Journal of Mechanics - A/Solids, vol.17, issue.2, pp.237-251, 1998.
DOI : 10.1016/S0997-7538(98)80084-3
URL : https://hal.archives-ouvertes.fr/hal-01376427

I. V. Papadopoulos, P. Davoli, C. Gorla, M. Filippini, and A. Bernasconi, A comparative study of multiaxial high-cycle fatigue criteria for metals, International Journal of Fatigue, vol.19, issue.3, pp.219-235, 1997.
DOI : 10.1016/S0142-1123(96)00064-3

I. V. Papadopoulos and V. P. Panoskaltsis, Invariant formulation of a gradient dependent multiaxial high-cycle fatigue criterion, Engineering Fracture Mechanics, vol.55, issue.4, pp.513-528, 1996.
DOI : 10.1016/S0013-7944(96)00047-1

A. Pavan, Contribution aux calculs d'organes d'ensembles mcaniques par rapport a la limite de fatigue. Explication des principaux facteurs, 1979.

G. Pekmezi, Nonlocal gradient-dependent modeling of plasticity with anisotropic hardening, 2008.

C. E. Phillips and R. B. Heywood, The size effect in fatigue of plain and notched steel specimens loaded under reversed direct stress, ARCHIVE: Proceedings of the Institution of Mechanical Engineers 1847-1982 (vols 1-196), vol.165, issue.1951, pp.113-124, 1951.
DOI : 10.1243/PIME_PROC_1951_165_014_02

G. Pluvinage, Notch effect in high cycle fatigue, ICF 9 Proceedings, pp.1237-50, 1997.

R. G. Pogoretskii and G. V. Karpenko, Effect of test piece length on the fatigue strength of steel in air Unified thermodynamic framework for nonlocal/gradient continuum theories, 141] C. Polizzotto, pp.90-94651, 1965.

C. Polizzotto, A nonlocal strain gradient plasticity theory for finite deformations, International Journal of Plasticity, vol.25, issue.7, pp.1280-1300, 2009.
DOI : 10.1016/j.ijplas.2008.09.009

C. Polizzotto, Size effects on the plastic collapse limit load of thin foils in bending and thin wires in torsion, European Journal of Mechanics - A/Solids, vol.30, issue.6, pp.854-864, 2011.
DOI : 10.1016/j.euromechsol.2011.05.003

C. Polizzotto, A unified residual-based thermodynamic framework for strain gradient theories of plasticity, International Journal of Plasticity, vol.27, issue.3, pp.388-413, 2011.
DOI : 10.1016/j.ijplas.2010.07.001

W. J. Poole, M. F. Ashby, and N. A. Fleck, Micro-hardness of annealed and work-hardened copper polycrystals, Scripta Materialia, vol.34, issue.4, pp.559-564, 1996.
DOI : 10.1016/1359-6462(95)00524-2

G. Qylafku, Z. Azari, N. Kadi, M. Gjonaj, and G. Pluvinage, Application of a new model proposal for fatigue life prediction on notches and key-seats, International Journal of Fatigue, vol.21, issue.8, pp.753-760, 1999.
DOI : 10.1016/S0142-1123(99)00046-8

J. R. Rice and D. M. Tracey, On the ductile enlargement of voids in triaxial stress fields???, Journal of the Mechanics and Physics of Solids, vol.17, issue.3, pp.201-217, 1969.
DOI : 10.1016/0022-5096(69)90033-7

J. L. Robert, Contribution a l'étude de la fatigue multiaxiale sous sollicitations périodiques ou aléatoires, These de l'Institut National des Sciences Appliquées (INSA) de Lyon, 1992.

R. Saha, Z. Xue, Y. Huang, and W. D. Nix, Indentation of a soft metal film on a hard substrate: strain gradient hardening effects, Journal of the Mechanics and Physics of Solids, vol.49, issue.9, pp.1997-2014, 2001.
DOI : 10.1016/S0022-5096(01)00035-7

J. Schiotz, F. D. Di-tolla, and K. W. Jacobsen, Softening of nanocrystalline metals at very small grain sizes, Nature, vol.391, issue.6667, pp.561-563, 1998.
DOI : 10.1038/35328

D. Shan, C. Wang, B. Guo, and X. Wang, Effect of thickness and grain size on material behavior in micro-bending, Transactions of Nonferrous Metals Society of China, vol.19, issue.20, pp.507-510, 2009.
DOI : 10.1016/S1003-6326(10)60098-2

M. X. Shi, Y. Huang, and K. C. Hwang, Plastic flow localization in mechanism-based strain gradient plasticity, International Journal of Mechanical Sciences, vol.42, issue.11, pp.422115-2131, 2000.
DOI : 10.1016/S0020-7403(00)00009-6

X. H. Shi and Y. G. Gao, Generalization of response number for dynamic plastic response of shells subjected to impulsive loading, International Journal of Pressure Vessels and Piping, vol.78, issue.6, pp.453-459, 2001.
DOI : 10.1016/S0308-0161(01)00050-3

Z. F. Shi, B. Huang, H. Tan, Y. Huang, T. Y. Zhang et al., Determination of the microscale stress???strain curve and strain gradient effect from the micro-bend of ultra-thin beams, International Journal of Plasticity, vol.24, issue.9, pp.1606-1624, 2008.
DOI : 10.1016/j.ijplas.2007.12.007

B. Shubhra, Characterization of nanostructured metals and metal nanowires for chip-to-package interconnections, 2006.

G. Sines, Behavior of metals under complex static and alternating stresses. Metal Fatigue, pp.145-169, 1959.

C. M. Sonsino, H. Kaufmann, and V. Grubisic, Transferability of Material Data for the Example of a Randomly Loaded Forged Truck Stub Axle, SAE Technical Paper Series, pp.1-22, 1997.
DOI : 10.4271/970708

N. A. Stelmashenko, M. G. Walls, L. M. Brown, and Y. V. Milman, Microindentations on W and Mo oriented single crystals: An STM study, Acta Metallurgica et Materialia, vol.41, issue.10, pp.412855-2865, 1993.
DOI : 10.1016/0956-7151(93)90100-7

J. S. Stolken and A. G. Evans, A microbend test method for measuring the plasticity length scale, Acta Materialia, vol.46, issue.14
DOI : 10.1016/S1359-6454(98)00153-0

L. Stromberg and M. Ristinmaa, FE-formulation of a nonlocal plasticity theory, Computer Methods in Applied Mechanics and Engineering, vol.136, issue.1-2, pp.127-144, 1996.
DOI : 10.1016/0045-7825(96)00997-8

S. Sun, B. L. Adams, and W. E. King, Observations of lattice curvature near the interface of a deformed aluminium bicrystal, Philosophical Magazine A, vol.68, issue.1, pp.9-25, 2000.
DOI : 10.1080/01418619608244382

T. Svedberg and K. Runesson, A thermodynamically consistent theory of gradient-regularized plasticity coupled to damage, International Journal of Plasticity, vol.13, issue.6-7, pp.669-696, 1997.
DOI : 10.1016/S0749-6419(97)00033-8

E. B. Tadmor, R. Miller, R. Phillips, and M. Ortiz, Nanoindentation and incipient plasticity, Journal of Materials Research, vol.234, issue.236, pp.2233-2250, 1999.
DOI : 10.1021/la9508912

L. Tao, S. Yaowu, and J. Lipei, Residual stress distributions and plastic zones in heterogeneous welded plates with a transverse crack, International Journal of Pressure Vessels and Piping, vol.77, issue.9, pp.549-553, 2000.
DOI : 10.1016/S0308-0161(00)00053-3

D. Taylor, The theory of critical distances: a new perspective in fracture mechanics, 2007.

G. I. Taylor, The Mechanism of Plastic Deformation of Crystals. Part I. Theoretical, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.145, issue.855, pp.362-387, 1934.
DOI : 10.1098/rspa.1934.0106

G. I. Taylor, R. Venkatraman, and J. C. Bravman, Plastic strain in metals [168] V. Tvergaard Material failure by void growth to coalescence Separation of film thickness and grain boundary strengthening effects in al thin films on si, Journal of the Institute of Metals Adv. Appl. Mech. Journal of Materials Resistance, vol.62, issue.7, pp.307-32483, 1938.

K. Y. Volokh and J. W. Hutchinson, Are Lower-Order Gradient Theories of Plasticity Really Lower Order?, Journal of Applied Mechanics, vol.69, issue.6, pp.862-864, 2002.
DOI : 10.1115/1.1504096

G. Z. Voyiadjis and R. K. , Nonlocal Gradient-Dependent Thermodynamics for Modeling Scale-Dependent Plasticity, International Journal for Multiscale Computational Engineering, vol.5, issue.3-4, pp.295-323, 2007.
DOI : 10.1615/IntJMultCompEng.v5.i3-4.110

G. Z. Voyiadjis and B. Deliktas, Formulation of strain gradient plasticity with interface energy in a consistent thermodynamic framework, International Journal of Plasticity, vol.25, issue.10, pp.1997-2024, 2009.
DOI : 10.1016/j.ijplas.2008.12.014

G. Z. Voyiadjis, B. J. Deliktas, and . Spencer, Mechanics of strain gradient plasticity with particular reference to decomposition of the state variables into energetic and dissipative components <ce:title>Mechanics, Mathematics and Materials a Special Issue in memory of A, International Journal of Engineering Science, vol.47, pp.11-121405, 2009.

G. Z. Voyiadjis and D. Faghihi, Thermo-mechanical strain gradient plasticity with energetic and dissipative length scales, International Journal of Plasticity, vol.30, issue.31, 2011.
DOI : 10.1016/j.ijplas.2011.10.007

G. Z. Voyiadjis and W. Huang, A modelling of single crystal plasticity with backstress evolution, Eur. J. Mech. A Solids, vol.15, pp.553-573, 1996.

G. Z. Voyiadjis, G. Pekmezi, and B. Deliktas, Nonlocal gradient-dependent modeling of plasticity with anisotropic hardening, International Journal of Plasticity, vol.26, issue.9, pp.1335-1356, 2010.
DOI : 10.1016/j.ijplas.2010.01.015

W. Wang, Y. Huang, K. J. Hsia, K. X. Hu, and A. Chandra, A study of microbend test by strain gradient plasticity, International Journal of Plasticity, vol.19, issue.3, pp.365-382, 2003.
DOI : 10.1016/S0749-6419(01)00066-3

D. H. Warner, F. Sansoz, and J. F. Molinari, Atomistic based continuum investigation of plastic deformation in nanocrystalline copper, International Journal of Plasticity, vol.22, issue.4, pp.754-774, 2006.
DOI : 10.1016/j.ijplas.2005.04.014

B. Weber, Fatigue multiaxiale des structures industrielles sous chargement quelconque, 1999.

Y. Wei and J. W. Hutchinson, Hardness trends in micron scale indentation, Journal of the Mechanics and Physics of Solids, vol.51, issue.11-12, pp.11-122037, 2003.
DOI : 10.1016/j.jmps.2003.09.011

Y. Xiang, T. Y. Tsui, and J. J. Vlassak, The mechanical properties of freestanding electroplated Cu thin films, Journal of Materials Research, vol.1, issue.06, pp.1607-1618, 2006.
DOI : 10.1063/1.1566471

Z. Xue, Y. Huang, K. C. Hwang, and M. Li, The Influence of Indenter Tip Radius on the Micro-Indentation Hardness, Journal of Engineering Materials and Technology, vol.124, issue.3, pp.371-379, 2002.
DOI : 10.1115/1.1480409

F. Zhang, R. Saha, Y. Huang, W. D. Nix, K. C. Hwang et al., Indentation of a hard film on a soft substrate: Strain gradient hardening effects, International Journal of Plasticity, vol.23, issue.1, pp.25-432, 2007.
DOI : 10.1016/j.ijplas.2006.02.011

. Findley, Fully reversed combined bending-twisting fatigue limit data, p.106