.. État-de-l-'art-des-connaissances-sur-la-poix, 58 3.2.2 Constituants et procédé de fabrication, 59 3.2.4 Comportement . . . . . . . . . . . . . . . . . . 60

L. Modélisation-de, 79 3.5.2 La DEM et la plate-forme de calcul GranOO, p.98

. Les-capteurs-numériques, WriteSensorData3D") sont alors utilisés pour sauver les valeurs souhaitées (pression de contact notamment

G. E. Moore, Cramming More Components Onto Integrated Circuits, Proceedings of the IEEE, vol.86, issue.1, pp.114-117, 1965.
DOI : 10.1109/JPROC.1998.658762

M. Nique and . Lithographie, Etats-Unis Sciences Physiques (publication de la Mission pour la Science et la Technologie de l, 2005.

B. J. Lin, Optical lithography : here is why, SPIE, 2009.
DOI : 10.1117/3.821000

A. K. Wong, Resolution enhancement techniques in optical lithography, SPIE, 2001.
DOI : 10.1117/3.401208

T. Matsuyama, Y. Ohmura, and D. M. Williamson, The lithographic lens: its history and evolution, Optical Microlithography XIX, pp.1-14, 2006.
DOI : 10.1117/12.656163

B. Rathsack, J. Hooge, S. Scheer, K. Nafus, S. Hatakeyama et al., Image contrast contributions to immersion lithography defect formation and process yield, Optical Microlithography XXI, pp.69241-69252, 2008.
DOI : 10.1117/12.772728

S. R. Kiontke and R. Steinkopf, Aspherical manufacturing in terms of accuracy, efficiency, and surface forms based on practical experiences, Optical Fabrication, Testing, and Metrology III, pp.1-10, 2006.
DOI : 10.1117/12.799487

W. König, M. Weck, N. Spenrath, and J. Luderich, Tutorial on diamond machining technology, 1991.

F. Laguarta, N. Lupon, and J. Armengol, Optical glass polishing by controlled laser surface-heat treatment, Applied Optics, vol.33, issue.27, pp.6508-6513, 1994.
DOI : 10.1364/AO.33.006508

O. W. Fähnle, H. Van-brug, and H. J. Frankena, Fluid jet polishing of optical surfaces, Applied Optics, vol.37, issue.28, pp.6771-6773, 1998.
DOI : 10.1364/AO.37.006771

J. Y. Jeong, S. E. Babayan, V. J. Tu, J. Park, I. Henins et al., Etching materials with an atmospheric-pressure plasma jet, Plasma Sources Science and Technology, vol.7, issue.3, pp.282-285, 1998.
DOI : 10.1088/0963-0252/7/3/005

Q. Technologie and Q. Mrf, http ://qedmrf.com/polishing/mrf-technology, 2013.

R. Geyl, A. Rinchet, and E. Rolland, Large optics ion figuring, Proc. of SPIE, pp.161-166, 1999.
DOI : 10.1117/12.360141

G. H. Chen and D. T. Moore, Aspherical surface polishing with a ring polisher, Applied Optics, vol.18, issue.4, pp.559-562, 1979.
DOI : 10.1364/AO.18.000559

J. Lubliner and J. E. Nelson, Stressed mirror polishing 1: A technique for producing nonaxisymmetric mirrors, Applied Optics, vol.19, issue.14, pp.2332-2340, 1980.
DOI : 10.1364/AO.19.002332

J. P. Marioge, Surfaces optiques : méthodes de fabrication et de contrôle, recherches. EDP Sciences, 2000.

J. Angenieux, A. Masson, and Y. Rouchouse, Aspherics: Precision Manufacturing By Vacuum Evaporation, Optical Engineering, vol.24, issue.3, pp.499-501, 1985.
DOI : 10.1117/12.7973514

T. Machine, High precision optical glass mold press machine GMP series, 2013.

S. Koh, Challenges and solutions for euv lithography

P. Naulleau, K. A. Goldberg, E. M. Gullickson, and J. Bokor, At-wavelength, system-level flare characterization of extremeultraviolet optical systems, Applied Optics, issue.17, pp.392941-2947, 2000.

F. Zernike, Diffraction Theory of the Knife-Edge Test and its Improved Form, The Phase-Contrast Method, Monthly Notices of the Royal Astronomical Society, vol.94, issue.5, pp.377-384, 1934.
DOI : 10.1093/mnras/94.5.377

V. N. Mahajan, Zernike Circle Polynomials and Optical Aberrations of Systems with Circular Pupils, Applied Optics, vol.33, issue.34, pp.8121-8124, 1994.
DOI : 10.1364/AO.33.008121

U. Dinger, F. Eisert, H. Lasser, M. Mayer, A. Seifert et al., Mirror substrates for euvlithography : progress in metrology and optical fabrication technology, Proc. of SPIE, pp.35-46, 2000.

V. V. Yaschuk, A. D. Franck, S. C. Irick, M. R. Howells, A. A. Macdowell et al., Two dimensional power spectral density measurements of x-ray optics with the micromap interferometric microscope, Proc. of SPIE, p.5858

E. Sidick, Power spectral density specification and analysis of large optical surfaces, Modeling Aspects in Optical Metrology II, p.7390
DOI : 10.1117/12.823844

U. Dinger, G. Seitz, S. Schulte, F. Eisert, C. Muenster et al., Fabrication and metrology of diffraction limited soft x-ray optics for the EUV microlithography, Advances in Mirror Technology for X-Ray, EUV Lithography, Laser, and Other Applications, pp.18-28, 2004.
DOI : 10.1117/12.511489

X. Chen, J. Raja, and S. Simanapalli, Multi-scale analysis of engineering surfaces, International Journal of Machine Tools and Manufacture, vol.35, issue.2, pp.231-238, 1995.
DOI : 10.1016/0890-6955(94)P2377-R

L. De-chiffre, P. Lonardo, H. Trumpold, D. A. Lucca, G. Goch et al., Quantitative Characterisation of Surface Texture, CIRP Annals - Manufacturing Technology, vol.49, issue.2, pp.635-642, 2002.
DOI : 10.1016/S0007-8506(07)63458-1

A. A. Bruzzone, J. S. Montanaro, A. Ferrando, and P. M. Lonardo, Wavelet Analysis for Surface Characterisation: an Experimental Assessment, CIRP Annals - Manufacturing Technology, vol.53, issue.1, pp.479-482, 2004.
DOI : 10.1016/S0007-8506(07)60744-6

J. Schmeelk, Wavelet transforms on two-dimensional images, Mathematical and Computer Modelling, vol.36, issue.7-8, pp.939-948, 2002.
DOI : 10.1016/S0895-7177(02)00238-8

H. K. Karow, Fabrication methods for precision optics, 2004.

D. W. Kim, S. W. Kim, and J. H. Burge, Non-sequential optimization technique for a computer controlled optical surfacing process using multiple tool influence functions, Optics Express, vol.17, issue.24, pp.21850-21866, 2009.
DOI : 10.1364/OE.17.021850.m003

C. J. Evans, E. Paul, D. Dornfeld, D. A. Lucca, G. Byrne et al., Material Removal Mechanisms in Lapping and Polishing, CIRP Annals - Manufacturing Technology, vol.52, issue.2, pp.611-633, 2003.
DOI : 10.1016/S0007-8506(07)60207-8

M. Buijs and K. Van-houten, A model for lapping of glass, Journal of Materials Science, vol.11, issue.11, pp.3014-3020, 2003.
DOI : 10.1007/BF00354706

P. Hed, D. F. Edwards, and J. B. Davis, Subsurface damage in optical materials : origin, measurements and removal, Collected papers from ASPE Spring Conference on subsurface damage in glass, 1989.

T. Suratwala, P. Davis, L. Wong, P. Miller, M. Feit et al., Sub-surface mechanical damage distributions during grinding of fused silica, Journal of Non-Crystalline Solids, vol.352, issue.52-54, pp.5601-5617, 2006.
DOI : 10.1016/j.jnoncrysol.2006.09.012

I. Iordanoff, A. Battentier, J. Néauport, and J. L. Charles, A discrete element model to investigate sub-surface damage due to surface polishing, Tribology International, vol.41, issue.11, pp.957-964, 2008.
DOI : 10.1016/j.triboint.2008.02.018
URL : https://hal.archives-ouvertes.fr/hal-01007057

J. Néauport, C. Ambard, P. Cormont, N. Darbois, J. Destribats et al., Subsurface damage measurement of ground fused silica parts by HF etching techniques, Optics Express, vol.17, issue.22, pp.20448-20456, 2009.
DOI : 10.1364/OE.17.020448

J. Wang, Y. Li, J. Han, Q. Xu, and Y. Guo, Evaluating subsurface damage in optical glasses, J. of the European Optical Society -Rapid Publications, vol.6, pp.1-16, 2011.

P. E. Miller, T. I. Suratwala, L. L. Wong, M. D. Feit, J. A. Menapace et al., The distribution of subsurface damage in fused silica, Laser-Induced Damage in Optical Materials: 2005, pp.56-68, 2005.
DOI : 10.1117/12.638821

J. Néauport, J. Destribats, C. Maunier, C. Ambard, P. Cormont et al., Loose abrasive slurries for optical glass lapping, Applied Optics, vol.49, issue.30, pp.495736-5745, 2010.
DOI : 10.1364/AO.49.005736

T. S. Izumitani, Optical glass, 1986.

J. C. Lambropoulos, S. Xu, and T. Fang, Loose abrasive lapping hardness of optical glasses and its interpretation, Applied Optics, vol.36, issue.7, pp.1501-1516, 1997.
DOI : 10.1364/AO.36.001501

S. D. Jacobs, S. A. Arrasmith, I. A. Kozhinova, L. L. Gregg, A. B. Shorey et al., An overview of magnetorheological finishing (mrf) for precision optics manufacturing, ACERS 102 : Ceramic Transactions, pp.185-199, 1999.

Q. Mrf, http ://qedmrf.com/polishing/mrftechnology/how-it-works, 2013.

W. I. Kordonski and S. D. Jacobs, Model of Magnetorheological Finishing, 6 t h International Conference on Adaptive Structures, pp.63-74, 1996.
DOI : 10.1177/1045389X9600700202

J. A. Menapace, B. Penetrante, D. Golini, A. F. Slomba, P. E. Miller et al., Combined advanced finishing and uv-laser conditioning for producing uv damage resistant fused silica optics, Proc. of SPIE, pp.56-68, 2001.

M. Schinhaerl, G. Smith, R. Stamp, L. Rascher, . Smith et al., Mathematical modelling of influence functions in computer-controlled polishing: Part I, Applied Mathematical Modelling, vol.32, issue.12, pp.2888-2906, 2008.
DOI : 10.1016/j.apm.2007.10.013

M. Schinhaerl, G. Smith, R. Stamp, L. Rascher, . Smith et al., Mathematical modelling of influence functions in computer-controlled polishing: Part II, Applied Mathematical Modelling, vol.32, issue.12, pp.2907-2924, 2008.
DOI : 10.1016/j.apm.2007.10.012

C. E. Shannon, R. Boerret, A. Kelm, and H. Thiess, Communication in the presence of noise High-speed form preserving polishing of precision aspheres, Proc. of IEEE Proc. of SPIE, pp.447-457, 1998.

L. M. Cook, Chemical processes in glass polishing, Journal of Non-Crystalline Solids, vol.120, issue.1-3, pp.152-171, 1990.
DOI : 10.1016/0022-3093(90)90200-6

T. G. Bifano, D. K. Depiero, and D. Golini, Chemomechanical effects in ductile-regime machining of glass, Precision Engineering, vol.15, issue.4, pp.238-247, 1993.
DOI : 10.1016/0141-6359(93)90106-K

M. Nogami and M. Tomozawa, Effect of Stress on Water Diffusion in Silica Glass, Journal of the American Ceramic Society, vol.65, issue.4, pp.151-154, 1984.
DOI : 10.1016/0012-821X(81)90184-9

F. W. Preston, The theory and design of glass plate polishing machines, J. Soc. Glass Technology, vol.11, pp.214-256, 1927.

N. J. Brown, Some speculations on the mechanisms of abrasive grinding and polishing, Precision Engineering, vol.9, issue.3, pp.129-137, 1987.
DOI : 10.1016/0141-6359(87)90030-4

L. Zhou, X. Xie, C. Jiao, and S. Li, Analysis of correcting ability of ion beam figuring, Key Engineering Materials, pp.364-366470, 2008.

T. Franz and T. Hänsel, Ion Beam Figuring (IBF) Solutions for the Correction of Surface Errors of Small High Performance Optics, Frontiers in Optics 2008/Laser Science XXIV/Plasmonics and Metamaterials/Optical Fabrication and Testing, p.7, 2008.
DOI : 10.1364/OFT.2008.OThC7

J. H. Burge, B. Anderson, S. Benjamin, M. K. Cho, K. Z. Smith et al., Development of optimal grinding and polishing tools for aspheric surfaces, Proc. of SPIE, pp.153-164, 2001.

M. Ando, M. Negishi, M. Takimoto, A. Deguchi, and N. Nakamura, Super-smooth polishing on aspherical surfaces, Nanotechnology, vol.6, issue.4, pp.111-120, 1995.
DOI : 10.1088/0957-4484/6/4/002

S. , D. Luzio, P. Revel, H. Gagnaire, and B. Feraud, élaboration d'un procédé de fabrication industrielle de surfaces asphériques de grande précision en verre, Mécanique & Industries, vol.8, pp.337-348, 2007.

C. Kuebler and H. Wang, Apparatus and a method of polishing an optical surface ; an optical component ; and a method of manufacturing a polishing tool, U.S, pp.834-836, 2009.

J. D. Nelson, B. Light, D. Savage, B. Wiederhold, and M. Mandina, VIBE??? Finishing to Remove Mid-Spatial Frequency Ripple, International Optical Design Conference and Optical Fabrication and Testing, p.2, 2010.
DOI : 10.1364/OFT.2010.OWE2

M. P. Mandina, Apparatus and process for polishing a substrate, U.S. Patent n ?, vol.6942, pp.554-555, 2005.

M. T. Tuell, J. H. Burge, and B. Anderson, Aspheric optics: smoothing the ripples with semi-flexible tools, Optical Engineering, vol.41, issue.7, pp.1473-1474, 2002.
DOI : 10.1117/1.1481898

D. W. Kim and J. H. Burge, Rigid conformal polishing tool using???non-linear visco-elastic effect, Optics Express, vol.18, issue.3, pp.2242-2257, 2010.
DOI : 10.1364/OE.18.002242.m002

M. Negishi, A. Deguchi, M. Ando, M. Takimoto, and N. Nakamura, A high-precision coordinate measuring system for super-smooth polishing, Nanotechnology, vol.6, issue.4, pp.139-147, 1995.
DOI : 10.1088/0957-4484/6/4/006

P. K. Mehta and R. E. Hufnagel, Pressure distribution under flexible polishing tools -1 conventional aspheric optics, Proc. of SPIE, pp.178-188, 1990.
DOI : 10.1117/12.21503

P. K. Mehta and R. E. Hufnagel, Pressure distribution under flexible polishing tools -2 cylindrical (conical) optics, Proc. of SPIE, pp.189-205, 1990.
DOI : 10.1117/12.21504

J. N. Reddy, Theory and analysis of elastic plates and shells, 2007.

P. K. Mehta and P. B. Reid, <title>Mathematical model for optical smoothing prediction of high-spatial-frequency surface errors</title>, Optomechanical Engineering and Vibration Control, pp.447-459, 1999.
DOI : 10.1117/12.363825

D. W. Kim, W. H. Park, H. K. Ahn, and J. H. Burge, Parametric smoothing model for visco-elastic polishing tools, Proc. of SPIE, pp.22515-2252672, 1999.
DOI : 10.1364/OE.18.022515.m001

J. E. Degroote, S. D. Jacobs, L. Gregg, A. E. Marino, and J. Hayes, <title>Quantitative characterization of optical polishing pitch</title>, Optical Manufacturing and Testing IV, pp.209-221, 2001.
DOI : 10.1117/12.453619

G. Couarraze and J. L. Grossiord, Initiation à la rhéologie, 2000.

C. Carrot and J. Guillet, Viscoélasticité linéaire des polymères fondus, 1999.

M. J. Prauchner, V. M. Pasa, N. D. Molhallem, C. Otani, S. Otani et al., Structural evolution of Eucalyptus tar pitch-based carbons during carbonization, Biomass and Bioenergy, vol.28, issue.1, pp.53-61, 2005.
DOI : 10.1016/j.biombioe.2004.05.004

D. Lesueur, The colloidal structure of bitumen: Consequences on the rheology and on the mechanisms of bitumen modification, Advances in Colloid and Interface Science, vol.145, issue.1-2
DOI : 10.1016/j.cis.2008.08.011

N. I. Yusoff, M. T. Shaw, and G. D. Airey, Modelling the linear viscoelastic rheological properties of bituminous binders, Construction and Building Materials, vol.25, issue.5, pp.2171-2189, 2011.
DOI : 10.1016/j.conbuildmat.2010.11.086

N. J. Brown, Optical polishing pitch. preprint UCRL-80301, 1977.

B. Mullany and S. Turner, Optical polishing pitches: impact frequency responses and indentation depths, Applied Optics, vol.49, issue.3, pp.442-449, 2010.
DOI : 10.1364/AO.49.000442

S. P. Sutton and W. T. Sutton, Optical polishing pitch formulations, pp.534-535, 2011.

S. P. Sutton and W. T. Sutton, Optical polishing pitch formulations, pp.432-433, 2012.

S. Inc and . Scientifis, Acculap premium synthetic polishing pitches. http ://salemdist.com/precision, 2013.

T. Instruments, Ares rheometer ? rheometrics series user manual, 2003.

G. Teyssèdre and C. Lacabanne, Caractérisation des polymères par analyse thermique, p.3770, 1996.

D. Roylance, Mechanics of materials, 1996.

J. Dealy and D. Plazek, Time-temperature superposiiton ? a users guide, Rheology Bulletin, vol.78, issue.2, pp.16-21, 2009.

W. L. Williams, R. F. Landel, and J. D. Ferry, The Temperature Dependence of Relaxation Mechanisms in Amorphous Polymers and Other Glass-forming Liquids, Journal of the American Chemical Society, vol.77, issue.14, pp.3701-3707, 1955.
DOI : 10.1021/ja01619a008

D. André, Modélisation par éléments discrets des phases d'ébauchage et de doucissage de la silice, 2012.

D. André, I. Iordanoff, J. L. Charles, and J. Néauport, Discrete element method to simulate continuous material by using the cohesive beam model, Computer Methods in Applied Mechanics and Engineering, vol.213, issue.216, pp.213-216113, 2012.
DOI : 10.1016/j.cma.2011.12.002

F. A. Tavarez and M. E. Plesha, Discrete element method for modelling solid and particulate materials, International Journal for Numerical Methods in Engineering, vol.25, issue.4, pp.379-404, 2007.
DOI : 10.1002/nme.1881

Y. Liu, Q. Dai, and Z. You, Viscoelastic Model for Discrete Element Simulation of Asphalt Mixtures, Journal of Engineering Mechanics, vol.135, issue.4, pp.324-333, 2009.
DOI : 10.1061/(ASCE)0733-9399(2009)135:4(324)

Z. You, Y. Liu, and Q. Dai, Three-Dimensional Microstructural-Based Discrete Element Viscoelastic Modeling of Creep Compliance Tests for Asphalt Mixtures, Journal of Materials in Civil Engineering, vol.23, issue.1, pp.79-87, 2011.
DOI : 10.1061/(ASCE)MT.1943-5533.0000038

Z. You, S. Adhikari, and Q. Dai, Three-Dimensional Discrete Element Models for Asphalt Mixtures, Journal of Engineering Mechanics, vol.134, issue.12, pp.1053-1063, 2004.
DOI : 10.1061/(ASCE)0733-9399(2008)134:12(1053)

Y. Liu and Z. You, Accelerated Discrete-Element Modeling of Asphalt-Based Materials with the Frequency-Temperature Superposition Principle, Journal of Engineering Mechanics, vol.137, issue.5, pp.355-365, 2011.
DOI : 10.1061/(ASCE)EM.1943-7889.0000234

J. F. Ferier and J. F. Molinari, Normal contact between rough surfaces by the discrete element method, Tribology International, vol.47, pp.1-8, 2012.