J. Abellan-nebot and F. Romero-subirón, A review of machining monitoring systems based on artificial intelligence process models. The International Journal of Advanced Manufacturing Technology, pp.237-257, 1007.

M. A. Abidi and R. C. Gonzalez, Data Fusion in Robotics and Machine Intelligence, 1992.

I. Abu-mahfouz, Drilling wear detection and classification using vibration signals and artificial neural network, International Journal of Machine Tools and Manufacture, vol.43, issue.7, pp.707-720, 2003.
DOI : 10.1016/S0890-6955(03)00023-3

F. A. Al-sulaiman, M. A. Baseer, and A. K. Sheikh, Use of electrical power for online monitoring of tool condition, Journal of Materials Processing Technology, vol.166, issue.3, pp.364-371, 2005.
DOI : 10.1016/j.jmatprotec.2004.07.104

C. Aliustaoglu, H. Ertunc, and H. Ocak, Tool wear condition monitoring using a sensor fusion model based on fuzzy inference system, Mechanical Systems and Signal Processing, vol.23, issue.2, pp.539-546, 2009.
DOI : 10.1016/j.ymssp.2008.02.010

S. Arul, L. Vijayaraghavan, and S. K. Malhotra, Online monitoring of acoustic emission for quality control in drilling of polymeric composites, Journal of Materials Processing Technology, vol.185, issue.1-3, pp.1-3184, 2007.
DOI : 10.1016/j.jmatprotec.2006.03.114

J. C. Aurich, D. Dornfeld, P. J. Arrazola, V. Franke, L. Leitz et al., Burrs???Analysis, control and removal, CIRP Annals - Manufacturing Technology, vol.58, issue.2, pp.519-542, 2009.
DOI : 10.1016/j.cirp.2009.09.004

D. Axinte and N. Gindy, Assessment of the effectiveness of a spindle power signal for tool condition monitoring in machining processes, International Journal of Production Research, vol.124, issue.13, pp.2679-2691, 2004.
DOI : 10.1115/1.3143795

P. Bandyopadhyay, E. Molina-gonzalez, R. Huang, and S. M. Wu, A feasibility study of on-line drill wear monitoring by DDS methodology, International Journal of Machine Tool Design and Research, vol.26, issue.3, pp.245-257, 1986.
DOI : 10.1016/0020-7357(86)90003-X

R. W. Barker, G. Klutke, and M. J. Hinich, Monitoring Rotating Tool Wear Using Higher-Order Spectral Features, Journal of Engineering for Industry, vol.115, issue.1, pp.23-29, 1993.
DOI : 10.1115/1.2901634

O. Basir and X. Yuan, Engine fault diagnosis based on multi-sensor information fusion using Dempster???Shafer evidence theory, Information Fusion, vol.8, issue.4, pp.379-386, 2007.
DOI : 10.1016/j.inffus.2005.07.003

M. Bauer, Approximation algorithms and decision making in the Dempster-Shafer theory of evidence ??? An empirical study, International Journal of Approximate Reasoning, vol.17, issue.2-3, pp.217-237, 1997.
DOI : 10.1016/S0888-613X(97)00013-3

T. Bayes, AN ESSAY TOWARDS SOLVING A PROBLEM IN THE DOCTRINE OF CHANCES, Biometrika, vol.45, issue.3-4, p.1763
DOI : 10.1093/biomet/45.3-4.296

M. Bedworth and J. O-'brien, The omnibus model: a new model of data fusion? Aerospace and Electronic Systems Magazine, IEEE, vol.15, issue.4, pp.30-36, 2000.

I. Bloch, Uncertainty, imprecision and additivity in data fusion: An historical point of view, pp.267-288, 1996.

C. Bonnet, Comprehensive study of cutting phenomena for Titanium alloys Ti6Al4V and CFRP stacks drilling in dry condition, Arts et Métiers ParisTech, 2010.
URL : https://hal.archives-ouvertes.fr/pastel-00540551

H. Boström, S. F. Handler, M. Brohede, R. Johansson, A. Karlsson et al., On the definition of information fusion as a field of research, 2007.

E. Brinksmeier, Prediction of Tool Fracture in Drilling, CIRP Annals - Manufacturing Technology, vol.39, issue.1, pp.97-100, 1990.
DOI : 10.1016/S0007-8506(07)61011-7

E. Brinksmeier and R. Janssen, Drilling of Multi-Layer Composite Materials consisting of Carbon Fiber Reinforced Plastics (CFRP), Titanium and Aluminum Alloys, CIRP Annals - Manufacturing Technology, vol.51, issue.1, pp.87-90, 2002.
DOI : 10.1016/S0007-8506(07)61472-3

B. Brophy, K. Kelly, and G. Byrne, AI-based condition monitoring of the drilling process, Journal of Materials Processing Technology, vol.124, issue.3, pp.305-310, 2002.
DOI : 10.1016/S0924-0136(02)00201-7

S. T. Bukkapatnam, S. R. Kumara, and A. Lakhtakia, Analysis of Acoustic Emission Signals in Machining, Journal of Manufacturing Science and Engineering, vol.121, issue.4, pp.568-576, 1999.
DOI : 10.1115/1.2833058

G. Byrne, D. Dornfeld, I. Inasaki, G. Ketteler, W. König et al., Tool Condition Monitoring (TCM) ??? The Status of Research and Industrial Application, CIRP Annals - Manufacturing Technology, vol.44, issue.2, pp.541-567, 1995.
DOI : 10.1016/S0007-8506(07)60503-4

S. Catché, R. Piquet, F. Lachaud, B. Castanié, and A. Bénaben, Interaction between surface texture after drilling and bearing behaviour of ud carbon/epoxy structures, Comptes Rendus des Jourñ A c es Nationales du Composites 17, 2011.

B. V. Dasarathy, Sensor fusion potential exploitation-innovative architectures and illustrative applications, Proceedings of the IEEE, vol.85, issue.1, pp.24-38, 1997.
DOI : 10.1109/5.554206

B. V. Dasarathy, Information fusion -What, where, why, when, and how? Information Fusion, pp.75-76, 2001.

A. P. Dempster, Upper and Lower Probabilities Induced by a Multivalued Mapping, The Annals of Mathematical Statistics, vol.38, issue.2, pp.325-339, 1967.
DOI : 10.1214/aoms/1177698950

T. Denoeux, Conjunctive and disjunctive combination of belief functions induced by nondistinct bodies of evidence, Artificial Intelligence, vol.172, issue.2-3, pp.234-364, 2008.
DOI : 10.1016/j.artint.2007.05.008

T. Denoeux and A. B. Yaghlane, Approximating the combination of belief functions using the fast M??bius transform in a coarsened frame, International Journal of Approximate Reasoning, vol.31, issue.1-2, pp.77-101, 2002.
DOI : 10.1016/S0888-613X(02)00073-7

E. Dimla, Sensor signals for tool-wear monitoring in metal cutting operations???a review of methods, International Journal of Machine Tools and Manufacture, vol.40, issue.8, pp.1073-1098, 2000.
DOI : 10.1016/S0890-6955(99)00122-4

P. E. Doré and A. Martin, About belief functions induced by probabilities, Proceedings of the first international conference on belief functions, 2010.

D. Dornfeld, Application of acoustic emission techniques in manufacturing, NDT & E International, vol.25, issue.6, pp.259-269, 1992.
DOI : 10.1016/0963-8695(92)90636-U

D. Dubois and H. Prade, Decsion Making Processes: Concepts and Methods

D. Dubois and H. Prade, A SET-THEORETIC VIEW OF BELIEF FUNCTIONS Logical operations and approximations by fuzzy sets???, International Journal of General Systems, vol.1, issue.3, pp.193-226, 1987.
DOI : 10.1016/0165-0114(78)90029-5

T. I. El-wardany, D. Gao, and M. A. Elbestawi, Tool condition monitoring in drilling using vibration signature analysis, International Journal of Machine Tools and Manufacture, vol.36, issue.6, pp.687-711, 1996.
DOI : 10.1016/0890-6955(95)00058-5

H. M. Ertunc and K. A. Loparo, A decision fusion algorithm for tool wear condition monitoring in drilling, International Journal of Machine Tools and Manufacture, vol.41, issue.9, pp.1347-1362, 2001.
DOI : 10.1016/S0890-6955(00)00111-5

H. M. Ertunc and C. Oysu, Drill wear monitoring using cutting force signals, Mechatronics, vol.14, issue.5, pp.533-548, 2004.
DOI : 10.1016/j.mechatronics.2003.10.005

C. E. Everson and S. H. Cheraghi, The application of acoustic emission for precision drilling process monitoring, International Journal of Machine Tools and Manufacture, vol.39, issue.3, pp.371-387, 1999.
DOI : 10.1016/S0890-6955(98)00054-6

X. Fan and M. J. Zuo, Fault diagnosis of machines based on D???S evidence theory. Part 1: D???S evidence theory and its improvement, Pattern Recognition Letters, vol.27, issue.5, pp.366-376, 2006.
DOI : 10.1016/j.patrec.2005.08.025

X. Fan and M. J. Zuo, Fault diagnosis of machines based on D???S evidence theory. Part 2: Application of the improved D???S evidence theory in gearbox fault diagnosis, Pattern Recognition Letters, vol.27, issue.5, pp.377-385, 2006.
DOI : 10.1016/j.patrec.2005.08.024

S. Ferreiro, B. Sierra, I. Irigoien, and E. Gorritxategi, Data mining for quality control: Burr detection in the drilling process, Computers & Industrial Engineering, vol.60, issue.4, pp.801-810, 2011.
DOI : 10.1016/j.cie.2011.01.018

L. A. Franco-gasca, G. Herrera-ruiz, R. Peniche-vera, R. De-jes?ajes?-jes?a-o-s-romero-troncoso, and W. Leal-tafolla, Sensorless tool failure monitoring system for drilling machines, International Journal of Machine Tools and Manufacture, vol.46, issue.3-4, pp.3-4381, 2006.
DOI : 10.1016/j.ijmachtools.2005.05.012

J. Frolik, M. Abdelrahman, and P. Kandasamy, A confidence-based approach to the self-validation, fusion and reconstruction of quasi-redundant sensor data, IEEE Transactions on Instrumentation and Measurement, vol.50, issue.6, pp.1761-1769, 2001.
DOI : 10.1109/19.982977

J. C. Fu, C. A. Troy, and P. J. Phillips, A matching pursuit approach to small drill bit breakage prediction, International Journal of Production Research, vol.37, issue.14, pp.3247-3261, 1999.
DOI : 10.1080/002075499190266

L. Fu, S. F. Ling, and C. H. Tseng, On-line breakage monitoring of small drills with input impedance of driving motor, Mechanical Systems and Signal Processing, pp.457-465, 2007.
DOI : 10.1016/j.ymssp.2005.04.004

D. Gabor, Theory of communication, Journal of the Institution of Electrical Engineers - Part I: General, vol.94, issue.73, pp.429-457, 1946.
DOI : 10.1049/ji-1.1947.0015

S. Garg, K. Patra, V. Khetrapal, S. K. Pal, and D. Chakraborty, Genetically evolved radial basis function network based prediction of drill flank wear, Engineering Applications of Artificial Intelligence, vol.23, issue.7, pp.1112-1120, 2010.
DOI : 10.1016/j.engappai.2010.02.012

P. Gonsalves, R. Cunningham, N. Ton, and D. Okon, Intelligent threat assessment processor (ITAP) using genetic algorithms and fuzzy logic, Proceedings of the Third International Conference on Information Fusion, pp.1-18, 2000.
DOI : 10.1109/IFIC.2000.859870

E. Govekar and I. Grabec, Self-Organizing Neural Network Application to Drill Wear Classification, Journal of Engineering for Industry, vol.116, issue.2, pp.233-238, 1994.
DOI : 10.1115/1.2901935

I. Guyon and A. Elisseeff, An introduction to variable and feature selection, Journal of Machine Learning Research, vol.3, pp.1157-1182, 2003.

D. L. Hall, Mathematical Techniques in Multisensor Data Fusion, Artech House, 1992.

D. L. Hall and J. Llinas, An introduction to multisensor data fusion, Proceedings of the IEEE, vol.85, issue.1, pp.6-23, 1997.
DOI : 10.1109/5.554205

D. L. Hall and A. Steinberg, Dirty secrets in multisensor data fusion, Proceedings of the National Symposium on sensor data fusion, 2000.

S. S. Haykin, Neural Networks: A Comprehensive Foundation, 1998.

S. S. Haykin, Neural Networks and Learning Machines, 2009.

H. Heidary, A. R. Oskouei, M. Hajikhani, B. Moosaloo, and M. A. Najafabadi, Acoustic Emission Signal Analysis by Wavelet Method to Investigate Damage Mechanisms During Drilling of Composite Materials, ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, Volume 1, pp.409-416, 2010.
DOI : 10.1115/ESDA2010-24389

H. Ho-cheng and C. K. Dharan, Delamintion during drilling in composite laminates, Proceedings of the ASME winter meeting, 1988.

H. Ho-cheng and C. K. Dharan, Delamination During Drilling in Composite Laminates, Journal of Engineering for Industry, vol.112, issue.3, pp.236-239, 1990.
DOI : 10.1115/1.2899580

I. Inasaki, Application of acoustic emission sensor for monitoring machining processes, Ultrasonics, vol.36, issue.1-5, pp.273-281, 1998.
DOI : 10.1016/S0041-624X(97)00052-8

E. Jantunen, A summary of methods applied to tool condition monitoring in drilling, International Journal of Machine Tools and Manufacture, vol.42, issue.9, pp.997-1010, 2002.
DOI : 10.1016/S0890-6955(02)00040-8

K. Jemielniak, Commercial Tool Condition Monitoring Systems, The International Journal of Advanced Manufacturing Technology, vol.15, issue.10, pp.71-721, 1999.
DOI : 10.1007/s001700050123

C. L. Jiaa, H. Ho-cheng, and C. K. Dharan, Correlation between acoustic emission and delamination in drilling composites laminates, Monitoring and control of manufacturing process, pp.177-192, 1990.

D. E. Dimla-jr, P. M. Lister, and N. J. Leighton, Neural network solutions to the tool condition monitoring problem in metal cutting???A critical review of methods, International Journal of Machine Tools and Manufacture, vol.37, issue.9, pp.1219-1241, 1997.
DOI : 10.1016/S0890-6955(97)00020-5

E. Kannatey-asibu-jr and D. A. Dornfeld, A study of tool wear using statistical analysis of metal-cutting acoustic emission, Wear, vol.76, issue.2, pp.247-261, 1982.
DOI : 10.1016/0043-1648(82)90009-6

F. E. White-jr, Data fusion lexicon, 1987.

M. Kanai, S. Fujii, K. Iwata, Y. Kanda, and Y. Tomonaga, Statistical characteristics of drill wear and drill life for the standardized performance tests, CIRP Annals, STC C, pp.61-68, 1978.

J. Kessler, Functional description of the data fusion process, Office of Naval Technology, 1992.

B. Khaleghi, A. Khamis, F. O. Karray, and S. N. Razavi, Multisensor data fusion: A review of the state-of-the-art. Information Fusion, 2011.

J. Kim, S. Min, and D. Dornfeld, Optimization and control of drilling burr formation of AISI 304L and AISI 4118 based on drilling burr control charts, International Journal of Machine Tools and Manufacture, vol.41, issue.7, pp.41923-936, 2001.
DOI : 10.1016/S0890-6955(00)00131-0

J. Kiviö and P. H. Andersson, Tool breakage monitoring in a multi-spindle drilling operation, XVII IMEKO World Congress, pp.2177-2180, 2003.

M. M. Kokar, J. A. Tomasik, and J. Weyman, Formalizing classes of information fusion systems, Information Fusion, vol.5, issue.3, pp.189-202, 2004.
DOI : 10.1016/j.inffus.2003.11.001

W. Konig, K. Kutzner, and U. Schehl, Tool monitoring of small drills with acoustic emission, International Journal of Machine Tools and Manufacture, vol.32, issue.4, pp.487-493, 1992.
DOI : 10.1016/0890-6955(92)90040-N

J. Kopa? and S. Sali, Acoustic emission in drilling carbon steel and nodular gray iron, Journal of Achievements in Materials and Manufacturing Engineering, vol.19, issue.1, pp.91-95, 2006.

M. Kumar, D. P. Garg, and R. A. Zachery, A Method for Judicious Fusion of Inconsistent Multiple Sensor Data, IEEE Sensors Journal, vol.7, issue.5, pp.723-733, 2007.
DOI : 10.1109/JSEN.2007.894905

M. Kumar, D. P. Garg, and R. A. Zachery, A generalized approach for inconsistency detection in data fusion from multiple sensors, 2006 American Control Conference, pp.2078-2083, 2006.
DOI : 10.1109/ACC.2006.1656526

B. Y. Lee and Y. S. Tarng, Drill fracture detection by the discrete wavelet transform, Journal of Materials Processing Technology, vol.99, issue.1-3, pp.250-254, 2000.
DOI : 10.1016/S0924-0136(99)00432-X

J. M. Lee, D. K. Choi, and C. N. Chu, Real-Time Tool Breakage Monitoring for NC Turning and Drilling, CIRP Annals - Manufacturing Technology, vol.43, issue.1, pp.81-84, 1994.
DOI : 10.1016/S0007-8506(07)62169-6

E. Lefevre, O. Colot, and P. Vannoorenberghe, Belief function combination and conflict management, Information Fusion, vol.3, issue.2, pp.149-162, 2002.
DOI : 10.1016/S1566-2535(02)00053-2

G. S. Li, W. S. Lau, and Y. Z. Zhang, In-process drill wear and breakage monitoring for a machining centre based on cutting force parameters, International Journal of Machine Tools and Manufacture, vol.32, issue.6, pp.855-867, 1992.
DOI : 10.1016/0890-6955(92)90035-F

P. G. Li and S. M. Wu, Monitoring Drilling Wear States by a Fuzzy Pattern Recognition Technique, Journal of Engineering for Industry, vol.110, issue.3, pp.297-300, 1988.
DOI : 10.1115/1.3187884

X. Li, A brief review: acoustic emission method for tool wear monitoring during turning, International Journal of Machine Tools and Manufacture, vol.42, issue.2, pp.157-165, 2002.
DOI : 10.1016/S0890-6955(01)00108-0

X. Li, S. Dong, and P. K. Venuvinod, Hybrid Learning for Tool Wear Monitoring, The International Journal of Advanced Manufacturing Technology, vol.16, issue.5
DOI : 10.1007/s001700050161

X. Li and S. K. Tso, Drill wear monitoring based on current signals, Wear, vol.231, issue.2, pp.172-178, 1999.
DOI : 10.1016/S0043-1648(99)00130-1

S. Y. Liang, R. L. Hecker, and R. G. Landers, Machining process monitoring and control: The state of the art, ASME Conference Proceedings, issue.3641X, pp.599-610, 2002.

S. C. Lin and C. J. Ting, Tool wear monitoring in drilling using force signals, Wear, vol.180, issue.1-2, pp.53-60, 1995.
DOI : 10.1016/0043-1648(94)06539-X

S. C. Lin and C. J. Ting, Drill wear monitoring using neural networks, International Journal of Machine Tools and Manufacture, vol.36, issue.4, pp.465-475, 1996.
DOI : 10.1016/0890-6955(95)00059-3

D. Liu, Y. Tang, and W. L. Cong, A review of mechanical drilling for composite laminates, Composite Structures, vol.94, issue.4, pp.1265-1279, 2012.
DOI : 10.1016/j.compstruct.2011.11.024

H. S. Liu, B. Y. Lee, and Y. S. Tarng, Monitoring of drill fracture from the current measurement of a three-phase induction motor, International Journal of Machine Tools and Manufacture, vol.36, issue.6, pp.729-738, 1996.
DOI : 10.1016/0890-6955(95)00052-6

H. S. Liu, B. Y. Lee, and Y. S. Tarng, In-process prediction of corner wear in drilling operations, Journal of Materials Processing Technology, vol.101, issue.1-3, pp.152-158, 2000.
DOI : 10.1016/S0924-0136(00)00434-9

L. Liu and R. Yager, Classic Works on the Dempster-Shafer Theory of Belief Function, chapter 1 -An Introduction, pp.1-34, 2005.

T. I. Liu and K. S. Anantharaman, Intelligent Classification and Measurement of Drill Wear, Journal of Engineering for Industry, vol.116, issue.3, pp.392-397, 1994.
DOI : 10.1115/1.2901957

T. I. Liu and S. M. Wu, On-Line Detection of Drill Wear, Journal of Engineering for Industry, vol.112, issue.3, pp.299-302, 1990.
DOI : 10.1115/1.2899590

S. Mallat, A Wavelet Tour of Signal Processing. Wavelet Analysis and Its Applications Series, 1999.

B. Marhic, L. Delahoche, C. Solau, A. M. Jolly-desodt, and V. Ricquebourg, An evidential approach for detection of abnormal behaviour in the presence of unreliable sensors, Information Fusion, vol.13, issue.2, pp.146-160, 2012.
DOI : 10.1016/j.inffus.2011.01.004

S. L. Marple, Digital Spectral Analysis, chapter Chapter, 1987.

A. Martin and C. Osswald, Une nouvelle r` egle de combinaison répartissant le conflit -application en imagerie sonar et classification de cibles radar, Traitement du Signal, vol.24, pp.71-82, 2007.

B. Mascaro, V. Gibiat, M. Bernardou, and Y. Esquerre, Acoustic emission of the drilling of carbon/epoxy composites, Proceedings of the Acusticum forum, pp.2823-2827, 2005.

P. G. Mathews and M. S. Shunmugam, Neural-network approach for predicting hole quality in reaming, International Journal of Machine Tools and Manufacture, vol.39, issue.5, pp.723-730, 1999.
DOI : 10.1016/S0890-6955(98)00061-3

K. Mori, N. Kasashima, J. C. Fu, and K. Muto, Prediction of small drill bit breakage by wavelet transforms and linear discriminant functions, International Journal of Machine Tools and Manufacture, vol.39, issue.9, pp.1471-1484, 1999.
DOI : 10.1016/S0890-6955(99)00004-8

B. Pe-na, G. Aramendi, A. Rivero, and L. N. López-de-lacalle, Monitoring of drilling for burr detection using spindle torque, International Journal of Machine Tools and Manufacture, issue.14, pp.451614-1621, 2005.

A. Noori-khajavi and R. Komanduri, On Multisensor Approach to Drill Wear Monitoring, CIRP Annals - Manufacturing Technology, vol.42, issue.1, pp.71-74, 1993.
DOI : 10.1016/S0007-8506(07)62394-4

A. Noori-khajavi and R. Komanduri, Frequency and time domain analyses of sensor signals in drilling???I. Correlation with drill wear, International Journal of Machine Tools and Manufacture, vol.35, issue.6, pp.775-793, 1995.
DOI : 10.1016/0890-6955(94)00060-W

A. Noori-khajavi and R. Komanduri, Frequency and time domain analyses of sensor signals in drilling???II. Investigation on some problems associated with sensor integration, International Journal of Machine Tools and Manufacture, vol.35, issue.6, pp.795-815, 1995.
DOI : 10.1016/0890-6955(94)00061-N

G. O. Donnell, P. Young, K. Kelly, and G. Byrne, Towards the improvement of tool condition monitoring systems in the manufacturing environment, Journal of Materials Processing Technology, vol.119, pp.1-3133, 2001.

L. Oukhellou, A. Debiolles, T. Denoeux, and P. Aknin, Fault diagnosis in railway track circuits using Dempster???Shafer classifier fusion, Engineering Applications of Artificial Intelligence, vol.23, issue.1, pp.117-128, 2010.
DOI : 10.1016/j.engappai.2009.06.005
URL : https://hal.archives-ouvertes.fr/hal-00467941

S. S. Panda, D. Chakraborty, and S. K. , Flank wear prediction in drilling using back propagation neural network and radial basis function network, Applied Soft Computing, vol.8, issue.2, pp.858-871, 2008.
DOI : 10.1016/j.asoc.2007.07.003

S. S. Panda, A. K. Singh, D. Chakraborty, and S. K. , Drill wear monitoring using back propagation neural network, Journal of Materials Processing Technology, vol.172, issue.2, pp.283-290, 2006.
DOI : 10.1016/j.jmatprotec.2005.10.021

C. R. Parikh, M. J. Pont, and N. B. Jones, Application of Dempster???Shafer theory in condition monitoring applications: a case study, Pattern Recognition Letters, vol.22, issue.6-7, pp.6-7777, 2001.
DOI : 10.1016/S0167-8655(01)00014-9

K. H. Park, A. Beal, D. Kim, P. Kwon, and J. Lantrip, Tool wear in drilling of composite/titanium stacks using carbide and polycrystalline diamond tools, Wear, vol.271, issue.11-12, pp.11-122826, 2011.
DOI : 10.1016/j.wear.2011.05.038

K. Patra, Acoustic emission based tool condition monitoring system in drilling, Proceedings of the World Congress on Engineering, 2011.

K. Patra, S. K. Pal, and K. Bhattacharyya, Artificial neural network based prediction of drill flank wear from motor current signals, Applied Soft Computing, vol.7, issue.3, pp.929-935, 2007.
DOI : 10.1016/j.asoc.2006.06.001

T. Radhakrishnan and S. M. Wu, On-Line Hole Quality Evaluation for Drilling Composite Material Using Dynamic Data, Journal of Engineering for Industry, vol.103, issue.1, pp.119-125, 1981.
DOI : 10.1115/1.3184452

A. Rakar and D. Juri?i´juri?i´c, Diagnostic reasoning under conflicting data: the application of the transferable belief model, Journal of Process Control, vol.12, issue.1, pp.55-67, 2002.
DOI : 10.1016/S0959-1524(00)00061-5

A. Rakar, D. Juri?i´juri?i´c, and P. Ballé, Transferable belief model in fault diagnosis, Engineering Applications of Artificial Intelligence, vol.12, issue.5, pp.555-567, 1999.
DOI : 10.1016/S0952-1976(99)00030-5

S. Rangwala and D. Dornfeld, Sensor Integration Using Neural Networks for Intelligent Tool Condition Monitoring, Journal of Engineering for Industry, vol.112, issue.3, pp.219-228, 1990.
DOI : 10.1115/1.2899578

S. R. Ravishankar and C. R. Murthy, Application of acoustic emission in drilling of composite laminates, NDT & E International, vol.33, issue.6, pp.429-435, 2000.
DOI : 10.1016/S0963-8695(00)00014-1

S. R. Ravishankar and C. R. Murthy, Characteristics of AE signals obtained during drilling composite laminates, NDT & E International, vol.33, issue.5, pp.341-348, 2000.
DOI : 10.1016/S0963-8695(99)00059-6

J. M. Richardson and K. A. Marsh, Fusion of Multisensor Data, The International Journal of Robotics Research, vol.5, issue.6, pp.78-96, 1988.
DOI : 10.1177/027836498800700607

C. Sammut and G. I. Webb, Encyclopedia of Machine Learning, 2011.
DOI : 10.1007/978-0-387-30164-8

C. Sanjay, M. L. Neema, and C. W. Chin, Modeling of tool wear in drilling by statistical analysis and artificial neural network, Journal of Materials Processing Technology, vol.170, issue.3, pp.494-500, 2005.
DOI : 10.1016/j.jmatprotec.2005.04.072

K. Sentz and S. Ferson, Combination of evidence in Dempster-Shafer theory, 2002.
DOI : 10.2172/800792

G. Shafer, A mathematical Theory of Evidence, 1976.

M. Shah, L. Unanue, P. Bidare, U. Galfarsoro, L. M. Iriarte et al., Tool control monitoring applied to drilling, Proceedings of the 6th MUGV conference, 2010.

A. K. Singh, S. S. Panda, D. Chakraborty, and S. K. , Predicting drill wear using an artificial neural network, The International Journal of Advanced Manufacturing Technology, vol.28, issue.5-6, pp.456-462, 1007.
DOI : 10.1007/s00170-004-2376-0

P. Smets, The combination of evidence in the transferable belief model, IEEE Transactions on Pattern Analysis and Machine Intelligence, vol.12, issue.5, pp.447-458, 1990.
DOI : 10.1109/34.55104

P. Smets, Belief functions on real numbers, International Journal of Approximate Reasoning, vol.40, issue.3, pp.181-223, 2005.
DOI : 10.1016/j.ijar.2005.04.001
URL : http://doi.org/10.1016/j.ijar.2005.04.001

P. Smets and R. Kennes, The transferable belief model, Artificial Intelligence, vol.66, issue.2, pp.191-234, 1994.
DOI : 10.1016/0004-3702(94)90026-4
URL : https://hal.archives-ouvertes.fr/hal-01185821

S. W. Smith, The scientist and engineer's guide to digital signal processing. California Technical Publishing, 1997.

K. Subramanian, Prediction of drill life. Transaction of ASME, pp.295-301, 1977.

I. N. Tansel, C. Mekdeci, O. Rodriguez, and B. Uragun, Monitoring drill conditions with wavelet based encoding and neural networks, International Journal of Machine Tools and Manufacture, vol.33, issue.4, pp.559-575, 1993.
DOI : 10.1016/0890-6955(93)90092-9

Y. S. Tarng and B. Y. Lee, Amplitude demodulation of the induction motor current for the tool breakage detection in drilling operations, Robotics and Computer-Integrated Manufacturing, vol.15, issue.4, pp.313-318, 1999.
DOI : 10.1016/S0736-5845(99)00015-0

R. Teti, K. Jemielniak, G. O. Donnell, and D. Dornfeld, Advanced monitoring of machining operations, CIRP Annals - Manufacturing Technology, vol.59, issue.2, pp.717-739, 2010.
DOI : 10.1016/j.cirp.2010.05.010

R. Teti and G. F. Micheletti, Tool Wear Monitoring Through Acoustic Emission, CIRP Annals - Manufacturing Technology, vol.38, issue.1, pp.99-102, 1989.
DOI : 10.1016/S0007-8506(07)62660-2

N. Third and . Iris-conference, Revisions to the JDL data fusion model, 1998.

C. Tsao, Prediction of flank wear of different coated drills for JIS SUS 304 stainless steel using neural network, Journal of Materials Processing Technology, vol.123, issue.3, pp.354-360, 2002.
DOI : 10.1016/S0924-0136(01)01257-2

A. Velayudham, R. Krishnamurthy, and T. Soundarapandian, Acoustic emission based drill condition monitoring during drilling of glass/phenolic polymeric composite using wavelet packet transform, International Conference on Recent Advances in Composite Materials, pp.141-145, 2005.
DOI : 10.1016/j.msea.2005.08.036

I. Vilcek, J. Kovac, and J. Janekova, Failure prediction by means of cepstral analysis and coherence function between thrust force and torque signals, 2011 IEEE International Symposium on Assembly and Manufacturing (ISAM), pp.1-4, 2011.
DOI : 10.1109/ISAM.2011.5942360

L. Wald, Definition and terms of reference in data fusion, International Archives of Photogrammetry and Remote Sensing, 1999.

E. L. Waltz and J. Llinas, Multisensor Data Fusion, Artech House, 1990.

L. Xiaoli, On-line detection of the breakage of small diameter drills using current signature wavelet transform, International Journal of Machine Tools and Manufacture, vol.39, issue.1, pp.157-164, 1999.
DOI : 10.1016/S0890-6955(97)00066-7

L. Xiaoli and Y. Zhejun, Tool wear monitoring with wavelet packet transform???fuzzy clustering method, Wear, vol.219, issue.2, pp.145-154, 1998.
DOI : 10.1016/S0043-1648(98)00165-3

R. Yager, On the dempster-shafer framework and new combination rules, Information Sciences, vol.41, issue.2, pp.93-138, 1987.
DOI : 10.1016/0020-0255(87)90007-7

X. Yang, Wear state recognition of drills based on K-means cluster and radial basis function neural network, International Journal of Automation and Computing, vol.15, issue.2, pp.271-276
DOI : 10.1007/s11633-010-0502-z

O. Yumak and H. Ertunc, Tool Wear Condition Monitoring in Drilling Processes Using Fuzzy Logic, Neural Information Processing, pp.508-517, 2006.
DOI : 10.1007/11893295_56

L. Zadeh, Book review, Information and Control, vol.4, issue.1, pp.81-83, 1984.
DOI : 10.1016/S0019-9958(61)80044-2

L. A. Zadeh, Fuzzy sets Information and Control [1] J. Abellan-Nebot and F. Romero Subirón. A review of machining monitoring systems based on artificial intelligence process models, The International Journal of Advanced Manufacturing Technology, vol.8, issue.47 10, pp.338-353237, 1007.

D. R. Cox and N. Reid, The Theory of the Design of Experiments, 2000.

J. P. Asselin-de-beauville and F. Kettaf, Bases théoriques pour l'apprentissage et la décision en reconnaissance des formes, Cepadues, 2005.

S. Houzelle and G. Giraudon, Contribution to multisensor fusion formalization, Robotics and Autonomous Systems, vol.13, issue.2, pp.69-85, 1994.
DOI : 10.1016/0921-8890(94)90050-7

K. Jemielniak and P. J. Arrazola, Application of AE and cutting force signals in tool condition monitoring in micro-milling, CIRP Journal of Manufacturing Science and Technology, vol.1, issue.2, pp.97-102, 2008.
DOI : 10.1016/j.cirpj.2008.09.007

M. Kumar, D. P. Garg, and R. A. Zachery, A Method for Judicious Fusion of Inconsistent Multiple Sensor Data, IEEE Sensors Journal, vol.7, issue.5, pp.723-733, 2007.
DOI : 10.1109/JSEN.2007.894905

S. Y. Liang, R. L. Hecker, and R. G. Landers, Machining process monitoring and control: The state of the art, ASME Conference Proceedings, issue.3641X, pp.599-610, 2002.

W. L. Oberkampf, S. M. Deland, B. M. Rutherford, K. V. Diegert, and K. F. Alvin, Estimation of total uncertainty in modeling and simulation, 2000.

S. R. Ravishankar and C. R. Murthy, Application of acoustic emission in drilling of composite laminates, NDT & E International, vol.33, issue.6, pp.429-435, 2000.
DOI : 10.1016/S0963-8695(00)00014-1

I. Al-shidhani, S. Beck, and W. Staszewski, Leak Monitoring in Pipeline Networks Using Wavelet Analysis, Key Engineering Materials, vol.245, issue.246, pp.245-346, 2003.
DOI : 10.4028/www.scientific.net/KEM.245-246.51

M. Cao, Q. Ren, and H. Wang, A Method of Detecting Seismic Singularities Using Combined Wavelet with Fractal, Chinese Journal of Geophysics, vol.39, issue.1, pp.671-679, 2004.
DOI : 10.1002/cjg2.708

W. Czaja and M. Wickerhauser, Singularity detection in images using dual local autocovariance Applied and Computational Harmonical Analysis, pp.77-88, 2002.

D. L. Hall, Mathematical Techniques in Multisensor Data Fusion, Artech House, 1992.

F. Herrmann, Singularity characterization by monoscale analysis: Application to seismic imaging Applied and Computational Harmonical Analysis, pp.71-88, 2001.

S. Houzelle and G. Giraudon, Contribution to multisensor fusion formalization, Robotics and Autonomous Systems, vol.13, issue.2, pp.69-85, 1994.
DOI : 10.1016/0921-8890(94)90050-7

T. Hsung and D. Lun, Application of singularity detection for the deblocking of JPEG decoded images, IEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, pp.640-644, 1998.

B. Jalil, O. Beyat, E. Fauvet, and O. Lalignant, Singularity detection by wavelet approach: application to electrocardiogram signal, Wavelet Applications in Industrial Processing VII, pp.6-8, 2010.
DOI : 10.1117/12.839185

M. Kumar, D. P. Garg, and R. A. Zachery, A Method for Judicious Fusion of Inconsistent Multiple Sensor Data, IEEE Sensors Journal, vol.7, issue.5, pp.723-733, 2007.
DOI : 10.1109/JSEN.2007.894905

G. , L. Moal, G. Moraru, M. Douilly, P. Véron et al., Multisensor data fusion and belief functions for robust singularity detection in signals, Proceedings of the International Conference on Information Fusion, pp.961-968, 2011.

G. Li, M. Zhou, and Y. Luo, Power quality disturbance detection using mathematical morphology and fractal technique, Proceedings of the IEEE Power Engineering Society Transmission and Distribution Conference, pp.1-6, 2005.

S. Mallat, Singularity detection and processing with wavelets, IEEE Transactions on Information Theory, vol.38, issue.2, pp.617-643, 1992.
DOI : 10.1109/18.119727

W. L. Oberkampf, S. M. Deland, B. M. Rutherford, K. V. Diegert, and K. F. Alvin, Estimation of total uncertainty in modeling and simulation, 2000.

Z. Peng and F. Chu, Application of the wavelet transform in machine condition monitoring and fault diagnostics: a review with bibliography, Mechanical Systems and Signal Processing, vol.18, issue.2, pp.199-221, 2004.
DOI : 10.1016/S0888-3270(03)00075-X

A. Robertson, C. Farrar, and H. Sohn, SINGULARITY DETECTION FOR STRUCTURAL HEALTH MONITORING USING HOLDER EXPONENTS, Mechanical Systems and Signal Processing, vol.17, issue.6, pp.1163-1184, 2003.
DOI : 10.1006/mssp.2002.1569

P. Smets, Belief functions on real numbers, International Journal of Approximate Reasoning, vol.40, issue.3, pp.181-223, 2005.
DOI : 10.1016/j.ijar.2005.04.001

Q. Sun and Y. Tang, SINGULARITY ANALYSIS USING CONTINUOUS WAVELET TRANSFORM FOR BEARING FAULT DIAGNOSIS, Mechanical Systems and Signal Processing, vol.16, issue.6, pp.1025-1041, 2002.
DOI : 10.1006/mssp.2002.1474

A. S. Willsky, A survey of design methods for failure detection in dynamic systems, Automatica, vol.12, issue.6, pp.601-611, 1976.
DOI : 10.1016/0005-1098(76)90041-8

J. Zhong, R. Ning, and D. Conover, Image Denoising Based on Multiscale Singularity Detection for Cone Beam CT Breast Imaging, IEEE Transactions on Medical Imaging, vol.23, issue.6, pp.696-703, 2004.
DOI : 10.1109/TMI.2004.826944

J. Abellan-nebot and F. Romero-subiròn, A review of machining monitoring systems based on artificial intelligence process models. The International Journal of Advanced Manufacturing Technology, pp.237-257, 1007.

H. Almuallim and T. G. Dietterich, Learning with many irrelevant features, Proceedings of the 9th international conference on artificial intelligence, pp.547-552, 1991.

K. Jemielniak, S. Bombinski, and P. X. Aristimuno, Tool condition monitoring in micromilling based on hierarchical integration of signal measures, CIRP Annals - Manufacturing Technology, vol.57, issue.1, pp.121-124, 2008.
DOI : 10.1016/j.cirp.2008.03.053

H. Aoyama and T. Ishii, Sensor to Detect Cutting Force Components, Cutting Torque, and Cutting Tool Deflections, Journal of Manufacturing Processes, vol.6, issue.2, pp.141-147, 2004.
DOI : 10.1016/S1526-6125(04)70068-7

J. Bins and B. Draper, Feature selection from huge feature sets, Proceedings Eighth IEEE International Conference on Computer Vision. ICCV 2001, pp.159-165, 2001.
DOI : 10.1109/ICCV.2001.937619

S. Binsaeid, S. Asfour, S. Cho, and A. Onar, Machine ensemble approach for simultaneous detection of transient and gradual abnormalities in end milling using multisensor fusion, Journal of Materials Processing Technology, vol.209, issue.10, pp.4728-4738, 2009.
DOI : 10.1016/j.jmatprotec.2008.11.038

A. L. Blum and P. Langley, Selection of relevant features and examples in machine learning, Artificial Intelligence, vol.97, issue.1-2, pp.245-271, 1997.
DOI : 10.1016/S0004-3702(97)00063-5

E. Brinksmeier, Prediction of Tool Fracture in Drilling, CIRP Annals - Manufacturing Technology, vol.39, issue.1, pp.97-100, 1990.
DOI : 10.1016/S0007-8506(07)61011-7

G. Byrne and G. E. , An Integrated Force Sensor Solution for Process Monitoring of Drilling Operations, CIRP Annals - Manufacturing Technology, vol.56, issue.1, pp.89-92, 2007.
DOI : 10.1016/j.cirp.2007.05.023

E. Cantú-paz, S. Newsam, and C. Kamath, Feature selection in scientific applications, Proceedings of the 2004 ACM SIGKDD international conference on Knowledge discovery and data mining , KDD '04, pp.788-793, 2004.
DOI : 10.1145/1014052.1016915

W. P. Dong, Y. H. , J. Au, and A. Mardapittas, Characteristics of acoustic emission in drilling, Tribology International, vol.27, issue.3, pp.169-170, 1994.
DOI : 10.1016/0301-679X(94)90041-8

K. Goebel and W. Yan, Feature selection for tool wear diagnosis using soft computing techniques, Proceedings of the ASME, Manufacturing in engineering division, pp.157-163, 2000.

I. Guyon and A. Elisseeff, An introduction to variable and feature selection, Journal of Machine Learning Research, vol.3, pp.1157-1182, 2003.

G. Hermann, Application of neural network based sensor fusion in drill monitoring, Proceedings of SAMI, Herlay, 2003.

A. A. Houshmand and E. Kannatey-asibu-jr, Statistical process control of acoustic emission for cutting tool monitoring, Mechanical Systems and Signal Processing, vol.3, issue.4, pp.405-424, 1989.
DOI : 10.1016/0888-3270(89)90046-0

D. V. Hutton and F. Hu, Acoustic Emission Monitoring of Tool Wear in End-Milling Using Time-Domain Averaging, Journal of Manufacturing Science and Engineering, vol.121, issue.1, pp.8-12, 1999.
DOI : 10.1115/1.2830581

I. Inasaki, Application of acoustic emission sensor for monitoring machining processes, Ultrasonics, vol.36, issue.1-5, pp.273-281, 1998.
DOI : 10.1016/S0041-624X(97)00052-8

I. Inasaki and S. Yonetsu, In-Process Detection of Cutting Tool Damage by Acoustic Emission Measurement, 22nd International Machine Tool Design and Research Conference, pp.261-268, 1981.
DOI : 10.1007/978-1-349-06281-2_33

K. Iwata and T. Morikawi, An application of acoustic emission measurement to inprocess sensing of tool wear, Annals of the CIRP, vol.25, pp.21-26, 1977.

L. Jack and A. Nandi, Feature selection for ANNs using genetic algorithms in condition monitoring, Proceedings of the 7th European symposium on artificial neural networks, pp.313-318, 1999.

K. Jemielniak, Some aspects of acoustic emission signal pre-processing, Journal of Materials Processing Technology, vol.109, issue.3, pp.242-247, 2001.
DOI : 10.1016/S0924-0136(00)00805-0

K. Jemielniak and O. Otman, Tool failure detection based on analysis of acoustic emission signals, Journal of Materials Processing Technology, vol.76, issue.1-3, pp.192-197, 1998.
DOI : 10.1016/S0924-0136(97)00379-8

C. L. Jiaa, H. Ho-cheng, and C. K. Dharan, Correlation between acoustic emission and delamination in drilling composites laminates, Monitoring and control of manufacturing process, pp.177-192, 1990.

K. Kira and L. , A Practical Approach to Feature Selection, Proceedings of the 2nd international conference on machine learning, pp.249-256, 1992.
DOI : 10.1016/B978-1-55860-247-2.50037-1

J. Kiviö and P. H. Andersson, Tool breakage monitoring in a multi-spindle drilling operation, XVII IMEKO World Congress, pp.2177-2180, 2003.

R. Kohavi and G. H. John, Wrappers for feature subset selection, Artificial Intelligence, vol.97, issue.1-2, pp.273-324, 1997.
DOI : 10.1016/S0004-3702(97)00043-X
URL : http://doi.org/10.1016/s0004-3702(97)00043-x

I. Kononenko, Estimating attributes: Analysis and extensions of RELIEF, Proceedings of the European conference on machine learning, pp.171-182, 1994.
DOI : 10.1007/3-540-57868-4_57

J. Kopa? and S. Sali, Acoustic emission in drilling carbon steel and nodular gray iron, Journal of Achievements in Materials and Manufacturing Engineering, vol.19, issue.1, pp.91-95, 2006.

J. J. Liu and D. A. Dornfeld, Modeling and Analysis of Acoustic Emission in Diamond Turning, Journal of Manufacturing Science and Engineering, vol.118, issue.2, pp.199-207, 1996.
DOI : 10.1115/1.2831012

T. H. Loutas, D. Roulias, E. Pauly, and V. Kostopoulos, The combined use of vibration, acoustic emission and oil debris on-line monitoring towards a more effective condition monitoring of rotating machinery, Mechanical Systems and Signal Processing, vol.25, issue.4, pp.1339-1352, 2011.
DOI : 10.1016/j.ymssp.2010.11.007

Y. Lu, I. Cohen, X. Zhou, and Q. Tian, Feature selection using principal feature analysis, Proceedings of the 15th international conference on Multimedia , MULTIMEDIA '07, 2007.
DOI : 10.1145/1291233.1291297

D. J. Mackay, Information Theory, Inference, and Learning Algorithms, 2003.

B. Mascaro, V. Gibiat, M. Bernardou, and Y. Esquerre, Acoustic emission of the drilling of carbon/epoxy composites, Proceedings of the Acusticum forum, pp.2823-2827, 2005.

G. , L. Moal, P. Rabaté, G. Moraru, P. Véron et al., A robust method for drilling monitoring using acoustic emission, 9th International conference on High Speed Machining, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01172025

L. C. Molina, L. Belanche, and A. Nebot, Feature selection algorithms: a survey and experimental evaluation, 2002 IEEE International Conference on Data Mining, 2002. Proceedings., pp.306-313, 2002.
DOI : 10.1109/ICDM.2002.1183917

S. Park, High frequency bandwidth cutting force measurements in milling using, 2004.

K. Patra, Acoustic emission based tool condition monitoring system in drilling, Proceedings of the World Congress on Engineering, 2011.

A. L. Quadro and J. R. Branco, Analysis of the acoustic emission during drilling test, Surface and Coatings Technology, vol.94, issue.95, pp.94-95691, 1997.
DOI : 10.1016/S0257-8972(97)00509-4

M. Ramulu, T. Branson, and D. Kim, A study on the drilling of composite and titanium stacks, Composite Structures, vol.54, issue.1, pp.67-77, 2001.
DOI : 10.1016/S0263-8223(01)00071-X

S. R. Ravishankar and C. R. Murthy, Application of acoustic emission in drilling of composite laminates, NDT & E International, vol.33, issue.6, pp.429-435, 2000.
DOI : 10.1016/S0963-8695(00)00014-1

M. Robnik and R. Kononenko, An adaptation of RELIEF for attribute estimation in regression, Proceedings of the 14th international conference on machine learning, 1997.

M. Shah, L. Unanue, P. Bidare, U. Galfarsoro, L. M. Iriarte et al., Tool control monitoring applied to drilling, Proceedings of the 6th MUGV conference, 2010.

B. Sick, ON-LINE AND INDIRECT TOOL WEAR MONITORING IN TURNING WITH ARTIFICIAL NEURAL NETWORKS: A REVIEW OF MORE THAN A DECADE OF RESEARCH, Mechanical Systems and Signal Processing, vol.16, issue.4, pp.487-546, 2002.
DOI : 10.1006/mssp.2001.1460

G. Silva and S. J. Wilcox, Sensor based condition monitoring feature selection using a self-organizing map, Proceedings of the World Congress on Engineering, 2008.

J. Sun, G. S. Hong, Y. S. Wong, and M. Rahman, Identification of feature set for effective tool condition monitoring by acoustic emission sensing, International Journal of Production Research, vol.13, issue.5, pp.901-918, 2004.
DOI : 10.1006/mssp.1996.0003

Y. Sun, Iterative RELIEF for Feature Weighting: Algorithms, Theories, and Applications, IEEE Transactions on Pattern Analysis and Machine Intelligence, vol.29, issue.6, pp.1035-1051, 2007.
DOI : 10.1109/TPAMI.2007.1093

R. Teti and G. F. Micheletti, Tool Wear Monitoring Through Acoustic Emission, CIRP Annals - Manufacturing Technology, vol.38, issue.1, pp.99-102, 1989.
DOI : 10.1016/S0007-8506(07)62660-2

L. Xiaoli and Y. Zhejun, Tool wear monitoring with wavelet packet transform???fuzzy clustering method, Wear, vol.219, issue.2, pp.145-154, 1998.
DOI : 10.1016/S0043-1648(98)00165-3