J. M. Antunes, L. F. Menezes, and J. V. Fernandes, Influence of Vickers tip imperfection on depth sensing indentation tests, International Journal of Solids and Structures, vol.44, issue.9, pp.2732-2747, 2007.
DOI : 10.1016/j.ijsolstr.2006.08.017

J. M. Antunes, L. F. Menezes, and J. V. Fernandes, Three-dimensional numerical simulation of Vickers indentation tests, International Journal of Solids and Structures, vol.43, issue.3-4, pp.3-4784, 2006.
DOI : 10.1016/j.ijsolstr.2005.02.048

M. M. Attallah, M. Strangwood, and C. L. Davis, Influence of the heating rate on the initiation of primary recrystallization in a deformed Al???Mg alloy, Scripta Materialia, vol.63, issue.4, pp.371-374, 2010.
DOI : 10.1016/j.scriptamat.2010.04.016

M. Avrami, Kinetics of Phase Change. I General Theory, The Journal of Chemical Physics, vol.7, issue.12, pp.1103-1112, 1939.
DOI : 10.1063/1.1750380

D. Beckenhauer, P. Niessen, and R. Pick, Effect of heating rate on the recrystallization temperature of tantalum, Journal of Materials Science Letters, vol.12, issue.7, pp.449-450, 1993.
DOI : 10.1007/BF00452788

J. Bénard, Autodiffusion par lacunes, pp.105-107, 1969.

M. Bernacki, Finite element model of primary recrystallization in polycrystalline aggregates using a level set framework, Modelling and Simulation in Materials Science and Engineering, vol.17, issue.6, p.64006, 2009.
DOI : 10.1088/0965-0393/17/6/064006
URL : https://hal.archives-ouvertes.fr/hal-00508362

M. Bernacki, R. Logé, and T. Coupez, Level set framework for the finite-element modelling of recrystallization and grain growth in polycrystalline materials, Scripta Materialia, vol.64, issue.6, pp.525-528, 2011.
DOI : 10.1016/j.scriptamat.2010.11.032
URL : https://hal.archives-ouvertes.fr/hal-00577039

P. Bernard, A two-site mean field model of discontinuous dynamic recrystallization, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, pp.7357-7367, 2011.
DOI : 10.1016/j.msea.2011.06.023
URL : https://hal.archives-ouvertes.fr/hal-00612438

M. Bestmann, Microstructural evolution during initial stages of static recovery and recrystallization: new insights from in-situ heating experiments combined with electron backscatter diffraction analysis, Journal of Structural Geology, vol.27, issue.3, pp.447-457, 2005.
DOI : 10.1016/j.jsg.2004.10.006

R. E. Bolmaro, R. A. Lebensohn, and H. G. Brokmeier, Crystal spin in two-sites self consistent models: From kinematics to kinetics, Computational Materials Science, vol.9, issue.1-2, pp.237-250, 1997.
DOI : 10.1016/S0927-0256(97)00079-7

V. E. Borthwick and S. Piazolo, Post-deformational annealing at the subgrain scale: Temperature dependent behaviour revealed by in-situ heating experiments on deformed single crystal halite, Journal of Structural Geology, vol.32, issue.7, pp.982-996, 2010.
DOI : 10.1016/j.jsg.2010.06.006

N. Bozzolo, S. Jacomet, and R. E. Logé, Fast in-situ annealing stage coupled with EBSD: A suitable tool to observe quick recrystallization mechanisms, Materials Characterization, vol.70, pp.28-32, 2012.
DOI : 10.1016/j.matchar.2012.04.020
URL : https://hal.archives-ouvertes.fr/hal-00709665

Y. Bréchet and G. Martin, Nucleation problems in metallurgy of the solid state: recent developments and open questions, Comptes Rendus Physique, vol.7, issue.9-10, pp.9-10959, 2006.
DOI : 10.1016/j.crhy.2006.10.014

Y. Bréchet, . Zurob, and C. Hutchinson, On the effect of pre-recovery on subsequent recrystallization, International Journal of Materials Research, vol.100, issue.10, pp.1446-1448, 2009.
DOI : 10.3139/146.110194

C. L. Briant, Recrystallization textures in tantalum sheet and wire, International Journal of Refractory Metals and Hard Materials, vol.18, issue.1, pp.1-8, 2000.
DOI : 10.1016/S0263-4368(99)00028-1

F. Buy, Etude expérimentale et modélisation du comportement plastique d'un tantale. Prise en compte de la vitesse de déformation et de l'histoire du chargement, Thèse de doctorat, 1996.

F. Buy, Evaluation of the parameters of a constitutive model for bcc metals based on thermal activation, Journal De Physique Iv, vol.7, pp.631-636, 1997.

J. Cahn, The impurity-drag effect in grain boundary motion, Acta Metallurgica, vol.10, issue.9, pp.789-798, 1962.
DOI : 10.1016/0001-6160(62)90092-5

S. R. Chen, I. Gray, and G. T. , Constitutive behavior of tantalum and tantalum-tungsten alloys, Metallurgical and Materials Transactions A, 27A, pp.2994-3006, 1996.
DOI : 10.1007/BF02663849

Y. B. Chun, S. L. Semiatin, and S. K. Hwang, Monte Carlo modeling of microstructure evolution during the static recrystallization of cold-rolled, commercial-purity titanium, Acta Materialia, vol.54, issue.14, pp.3673-3689, 2006.
DOI : 10.1016/j.actamat.2006.03.055

U. Czubayko, Influence of triple junctions on grain boundary motion, Acta Materialia, vol.46, issue.16, pp.5863-5871, 1998.
DOI : 10.1016/S1359-6454(98)00241-9

I. Dillamore, C. Smith, and T. Watson, Oriented Nucleation in the Formation of Annealing Textures in Iron, Metal Science Journal, vol.10, issue.39, pp.49-54, 1967.
DOI : 10.1179/msc.1967.1.1.49

R. D. Doherty, Current issues in recrystallization: a review, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, pp.219-274, 1997.

D. Fan and L. Q. Chen, Computer simulation of grain growth using a continuum field model, Acta Materialia, vol.45, issue.2, pp.611-622, 1997.
DOI : 10.1016/S1359-6454(96)00200-5

J. Farré and F. Buy, Saturation des propriétés mécaniques à grandes déformations, 1999.

J. Farré, F. Buy, and F. Llorca, Modèle EDD sur tantale pétri 3D Prise en compte de l'influence de la température et de la vitesse de déformation, 2001.

S. Fresnois, Modélisation polycristalline du comportement mécanique du tantale. Application à la mise en forme par hydroformage, 2001.

B. Gaudout, Modélisation des évolutions microstructurales et étude de la lubrification par film solide lors du filage à chaud d'alliages de zirconium, 2009.

R. L. Goetz and V. Seetharaman, Static recrystallization kinetics with homogeneous and heterogeneous nucleation using a cellular automata model, Metallurgical and Materials Transactions A, vol.25, issue.115, pp.2307-2321, 1998.
DOI : 10.1007/s11661-998-0108-z

G. Gottstein and L. S. Shvindlerman, Grain boundary migration in Metals: thermodynamics, kinetics, applications, 1999.
DOI : 10.1201/9781420054361

S. Gourdet and F. Montheillet, A model of continuous dynamic recrystallization, Acta Materialia, vol.51, issue.9, pp.2685-2699, 2003.
DOI : 10.1016/S1359-6454(03)00078-8

K. T. Hartwig, Hardness and Microstructure Changes in Severely Deformed and Recrystallized Tantalum, Ultrafine Grained Materials II, vol.68, pp.151-160, 2002.
DOI : 10.1002/9781118804537.ch18

J. P. Hirth, The influence of grain boundaries on mechanical properties, Metallurgical Transactions, vol.60, issue.12, pp.3047-3067, 1972.
DOI : 10.1007/BF02661312

K. G. Hoge and A. K. Mukherjee, The temperature and strain rate dependence of the flow stress of tantalum, Journal of Materials Science, vol.45, issue.8, p.1666, 1977.
DOI : 10.1007/BF00542818

E. A. Holm, M. A. Miodownik, and A. D. Rollett, On abnormal subgrain growth and the origin of recrystallization nuclei, Acta Materialia, vol.51, issue.9, pp.2701-2716, 2003.
DOI : 10.1016/S1359-6454(03)00079-X

E. Hosseini and M. Kazeminezhad, Dislocation structure and strength evolution of heavily deformed tantalum, International Journal of Refractory Metals and Hard Materials, vol.27, issue.3, pp.605-610, 2009.
DOI : 10.1016/j.ijrmhm.2008.09.006

M. Houillon, Modélisation du procédé de fluotournage du tantale et du traitement thermique associé, 2009.

K. Huang, Towards the modeling of recrystallization phenomena in multi-pass conditions - Application to 304L steel, 2011.

Y. Huang and F. J. Humphreys, Measurements of grain boundary mobility during recrystallization of a single-phase aluminium alloy, Acta Materialia, vol.47, issue.7, pp.2259-2268, 1999.
DOI : 10.1016/S1359-6454(99)00062-2

F. J. Humphreys, Combined in situ SEM annealing and EBSD of deformed materials. Textures and Microstructures, pp.26-27281, 1996.

F. J. Humphreys and M. Hatherly, Recrystallization and related annealing phenomena 2nd editio, 2004.

M. F. Hupalo and H. R. Sandim, The annealing behavior of oligocrystalline tantalum deformed by cold swaging, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, pp.318216-223, 2001.
DOI : 10.1016/S0921-5093(01)01323-5

P. J. Hurley and F. J. Humphreys, A study of recrystallization in single-phase aluminium using in-situ annealing in the scanning electron microscope, Journal of Microscopy, vol.44, issue.27, pp.225-234, 2004.
DOI : 10.1111/j.0022-2720.2004.01300.x

B. Hutchinson, Nucleation of recrystallisation, Scripta Metallurgica et Materialia, vol.27, issue.11, pp.1471-1475, 1992.
DOI : 10.1016/0956-716X(92)90130-7

W. M. Isbell, D. R. Christman, and S. G. Babcock, Measurements of dynamic properties of materials, volume VI: tantalum, 1972.

O. M. Ivasishin, A 3-D Monte-Carlo (Potts) model for recrystallization and grain growth in polycrystalline materials, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, pp.216-232, 2006.
DOI : 10.1016/j.msea.2006.06.115

B. Jaoul, Etude de la plasticité et application aux métaux, 2008.

W. A. Johnson and R. F. Mehl, Reaction kinetics in processes of nucleation and growth. Transactions of metallurgical Society of AIME, p.416, 1939.

J. Jonas and M. Barnett, Influence of ferrite rolling temperature on microstructure and texture in deformed low C and IF steels, ISIJ International, vol.37, issue.7, pp.697-705, 1997.

G. R. Jonhson and W. H. Cook, A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures, Proceedings of the 7th International Symposium on Ballistics, pp.541-547, 1983.

R. Kapoor and S. Nemat-nasser, Comparison between high and low strain-rate deformation of tantalum, Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, pp.31815-823, 2000.

M. Kiaei, R. Chiron, and B. Bacroix, Investigation of recrystallization mechanisms in steels during in situ annealing in a SEM, Scripta Materialia, vol.36, issue.6, pp.659-666, 1997.
DOI : 10.1016/S1359-6462(96)00434-4

D. M. Kirch, Laser powered heating stage in a scanning electron microscope for microstructural investigations at elevated temperatures, Review of Scientific Instruments, vol.79, issue.4, p.79, 2008.
DOI : 10.1063/1.2908434

J. Klepaczko, Thermally activated flow and strain rate history effects for some polycrystalline f.c.c. metals, Materials Science and Engineering, vol.18, issue.1, pp.121-135, 1975.
DOI : 10.1016/0025-5416(75)90078-6

A. Kolmogorov, A statistical theory for the recrystallization of metals, Izv. Akad. nauk. USSR-Ser- Matemat, vol.1, issue.3, p.355, 1937.

N. C. Krieger-lassen, D. Jensen, and K. Conradsen, Automatic recognition of deformed and recrystallized regions of partially recrystallized samples using electron backscattering patterns, Materials Science Forum, pp.157-162149, 1994.

L. P. Kubin and A. Mortensen, Geometrically necessary dislocations and strain-gradient plasticity: a few critical issues, Scripta Materialia, vol.48, issue.2, pp.119-125, 2003.
DOI : 10.1016/S1359-6462(02)00335-4

G. Kugler and R. Turk, Study of the influence of initial microstructure topology on the kinetics of static recrystallization using a cellular automata model, Computational Materials Science, vol.37, issue.3, pp.284-291, 2006.
DOI : 10.1016/j.commatsci.2005.07.005

D. H. Lassila, A. Goldberg, and R. Becker, The effect of grain boundaries on the athermal stress of tantalum and tantalum-tungsten alloys, Metallurgical and Materials Transactions A, 33A, pp.3457-3464, 2002.
DOI : 10.1007/s11661-002-0333-9

J. Le, D. Weygand, and Y. Brechet, Zener Pinning and grain growth: a two-dimensional vertex computer simulation, Acta Materialia, vol.47, issue.3, pp.961-970, 1999.

A. Lens, C. Maurice, and J. H. Driver, Grain boundary mobilities during recrystallization of Al???Mn alloys as measured by in situ annealing experiments, Materials Science and Engineering A- Structural Materials Properties Microstructure and Processing, pp.144-153, 2005.
DOI : 10.1016/j.msea.2005.05.010
URL : https://hal.archives-ouvertes.fr/emse-00505832

G. J. Liao, L. Gall, R. Saindrenan, and G. , Experimental investigations into Kinetics of recrystallisation of cold rolled nickel, Materials Science and Technology, vol.67, issue.5, pp.411-416, 1998.
DOI : 10.1016/S1359-6454(96)00217-0

R. E. Logé, Linking plastic deformation to recrystallization in metals using digital microstructures, Philosophical Magazine, vol.14, issue.30-32, pp.30-323691, 2008.
DOI : 10.1016/j.actamat.2006.10.022

K. Lücke and H. P. Stüwe, No Title, Recovery and recrystallization in metals. Interscience publications, p.171, 1963.

J. C. Mach, A. J. Beaudoin, and A. Acharya, Continuity in the plastic strain rate and its influence on texture evolution, Journal of the Mechanics and Physics of Solids, vol.58, issue.2, pp.105-128, 2010.
DOI : 10.1016/j.jmps.2009.11.005

A. Manonukul and F. P. Dunne, Initiation of dynamic recrystallization under inhomogeneous stress states in pure copper, Acta Materialia, vol.47, issue.17, pp.4339-4354, 1999.
DOI : 10.1016/S1359-6454(99)00313-4

M. A. Martorano, Observations of grain boundary protrusions in static recrystallization of high-purity bcc metals, Scripta Materialia, vol.56, issue.10, pp.903-906, 2007.
DOI : 10.1016/j.scriptamat.2007.01.032

G. Masing and J. Raffelsieper, Mechanische Erholung von Aluminium-Einkristallen. Zeitschrift Fur Metallkunde, p.65, 1950.

S. N. Mathaudhu and K. T. Hartwig, Grain refinement and recrystallization of heavily worked tantalum, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, pp.128-142, 2006.
DOI : 10.1016/j.msea.2006.03.089

S. N. Mathaudhu and K. T. Hartwig, Processing microstructure property relationships in severely deformed tantalum, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, pp.94-100, 2007.
DOI : 10.1016/j.msea.2006.08.120

D. Mattissen, In-situ investigation of grain boundary and triple junction kinetics in aluminium - 10??p.p.m. magnesium, Journal of Microscopy, vol.50, issue.3, pp.257-261, 2004.
DOI : 10.1111/j.0022-2720.2004.01281.x

C. Maurice and F. J. Humphreys, 2-D and 3-D curvature driven vertex simulations of grain growth, Grain Growth in Polycrystalline Materials III, pp.81-90, 1998.

J. T. Michalak and H. W. Paxton, Some recovery characteristics of zone-melted iron. Transactions of metallurgical Society of AIME, p.850, 1961.

M. A. Miodownik, A review of microstructural computer models used to simulate grain growth and recrystallisation in aluminium alloys, Journal of Light Metals, vol.2, issue.3, pp.125-135, 2002.
DOI : 10.1016/S1471-5317(02)00039-1

N. Moelans, F. Wendler, and B. Nestler, Comparative study of two phase-field models for grain growth, Computational Materials Science, vol.46, issue.2, pp.479-490, 2009.
DOI : 10.1016/j.commatsci.2009.03.037

D. A. Molodov, On the effect of purity and orientation on grain boundary motion, Acta Materialia, vol.46, issue.2, pp.553-564, 1998.
DOI : 10.1016/S1359-6454(97)00277-2

I. M. Montano-zuniga, Numerical simulation of recrystallization in BCC metals, Computational Materials Science, vol.49, issue.3, pp.512-517, 2010.
DOI : 10.1016/j.commatsci.2010.05.042

F. Montheillet, O. Lurdos, and G. Damamme, A grain scale approach for modeling steady-state discontinuous dynamic recrystallization, Acta Materialia, vol.57, issue.5, pp.1602-1612, 2009.
DOI : 10.1016/j.actamat.2008.11.044
URL : https://hal.archives-ouvertes.fr/emse-00463547

H. Nakamichi, F. J. Humphreys, and I. Brough, Recrystallization phenomena in an IF steel observed by in situ EBSD experiments, Journal of Microscopy, vol.467, issue.3, pp.464-471, 2008.
DOI : 10.2355/isijinternational.36.1046

S. Nemat-nasser and R. Kapoor, Deformation behavior of tantalum and a tantalum tungsten alloy, International Journal of Plasticity, vol.17, issue.10, pp.1351-1366, 2001.
DOI : 10.1016/S0749-6419(00)00088-7

G. Neumann and C. Tuijn, Self-diffusion and Impurity Diffusion in Pure Metals: handbook of experimental data, 2009.

C. H. Park, S. Hong, and C. S. Lee, A unified constitutive model for quasi-static flow responses of pure Ta and Ta???W alloys, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, pp.1154-1161, 2011.
DOI : 10.1016/j.msea.2010.10.057

H. Paul, Scanning electron microscopy and transmission electron microscopy in situ studies of grain boundary migration in cold-deformed aluminium bicrystals, Journal of Microscopy, vol.495, issue.3, pp.264-267, 2006.
DOI : 10.1016/S1359-6454(01)00381-0
URL : https://hal.archives-ouvertes.fr/hal-00293135

S. Piazolo, The Potential of Combined In-Situ Heating Experiments and Detailed EBSD Analysis in the Investigation of Grain Scale Processes such as Recrystallization and Phase Transformation, Materials Science Forum, vol.467, issue.470, pp.467-4701407, 2004.
DOI : 10.4028/www.scientific.net/MSF.467-470.1407

K. Pi?ko?, Generalized vertex model of recrystallization ??? Application to polycrystalline copper, Computational Materials Science, vol.42, issue.4, pp.584-594, 2008.
DOI : 10.1016/j.commatsci.2007.09.014

C. W. Price, Comments on the extent of simultaneous recovery during recrystallization and its effect on recrystallization kinetics, Scripta Metallurgica, vol.23, issue.8, pp.1273-1276, 1989.
DOI : 10.1016/0036-9748(89)90043-4

S. Primig, Influence of the heating rate on the recrystallization behavior of molybdenum, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, pp.316-324, 2012.
DOI : 10.1016/j.msea.2011.12.099

D. Raabe, Introduction of a scalable three-dimensional cellular automaton with a probabilistic switching rule for the discrete mesoscale simulation of recrystallization phenomena, Philosophical Magazine A, vol.191, issue.10, pp.792339-2358, 1999.
DOI : 10.4028/www.scientific.net/MSF.273-275.169

D. Raabe, Texture and microstructure of rolled and annealed tantalum, Materials Science and Technology, vol.57, issue.9, pp.299-305, 1994.
DOI : 10.1179/mst.1986.2.8.807

S. Raghavan and S. S. Sahay, Modeling the topological features during grain growth by cellular automaton, Computational Materials Science, vol.46, issue.1, pp.92-99, 2009.
DOI : 10.1016/j.commatsci.2009.01.028

G. Regazzoni, Comportement et ductilité du cuivre et du tantale purs dans le domaine de vitesse de déformation 10 -4 -3x1 3 s -1, 1983.

D. W. Richards, Annealing studies of pure and alloyed tantalum employing rocking curves Advances in X-ray Analysis, pp.285-290, 2003.

A. D. Rollett, Overview of modeling and simulation of recrystallization, Progress in Materials Science, pp.79-99, 1997.
DOI : 10.1016/S0079-6425(97)00008-X

A. Rollett and D. Raabe, A hybrid model for mesoscopic simulation of recrystallization, Computational Materials Science, vol.21, issue.1, pp.69-78, 2001.
DOI : 10.1016/S0927-0256(00)00216-0

S. Saltykov, Stereometric metallography, 1958.

H. R. Sandim, Grain subdivision and recrystallization in oligocrystalline tantalum during cold swaging and subsequent annealing, International Journal of Refractory Metals and Hard Materials, vol.17, issue.6, pp.431-435, 1999.
DOI : 10.1016/S0263-4368(99)00035-9

H. R. Sandim, Recrystallization of oligocrystalline tantalum deformed by cold rolling, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, pp.209-221, 2005.
DOI : 10.1016/j.msea.2004.09.032

H. R. Sandim, J. P. Martins, and A. F. Padilha, Orientation effects during grain subdivision and subsequent annealing in coarse-grained tantalum, Scripta Materialia, vol.45, issue.6, pp.45733-738, 2001.
DOI : 10.1016/S1359-6462(01)01087-9

H. R. Sandim, H. J. Mcqueen, and W. Blum, Microstructure of cold swaged tantalum at large strains, Scripta Materialia, vol.42, issue.2, pp.151-156, 2000.
DOI : 10.1016/S1359-6462(99)00331-0

G. G. Seward, High-temperature electron backscatter diffraction and scanning electron microscopy imaging techniques: In-situ investigations of dynamic processes, Scanning, vol.28, issue.4, pp.232-240, 2002.
DOI : 10.1002/sca.4950240503

G. G. Seward, In situ SEM-EBSD observations of the hcp to bcc phase transformation in commercially pure titanium, Acta Materialia, vol.52, issue.4, pp.821-832, 2004.
DOI : 10.1016/j.actamat.2003.10.049

E. Simonsen, Twinning in iron, Acta Metallurgica, vol.8, issue.11, pp.809-810, 1960.
DOI : 10.1016/0001-6160(60)90179-6

D. Srolovitz, Computer simulation of recrystallization???II. Heterogeneous nucleation and growth, Acta Metallurgica, vol.36, issue.8, pp.2115-2128, 1988.
DOI : 10.1016/0001-6160(88)90313-6

D. Srolovitz, Grain growth in two dimensions, Scripta Metallurgica, vol.17, issue.2, pp.241-246, 1983.
DOI : 10.1016/0036-9748(83)90106-0

D. Srolovitz, G. Grest, and M. Anderson, Computer simulation of recrystallization???I. Homogeneous nucleation and growth, Acta Metallurgica, vol.34, issue.9, pp.1833-1845, 1986.
DOI : 10.1016/0001-6160(86)90128-8

H. P. Stüwe, A. F. Padilha, and F. Siciliano, Competition between recovery and recrystallization, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, pp.361-367, 2002.
DOI : 10.1016/S0921-5093(01)01860-3

M. Syha and D. Weygand, A generalized vertex dynamics model for grain growth in three dimensions, Modelling and Simulation in Materials Science and Engineering, vol.18, issue.1, p.15010, 2010.
DOI : 10.1088/0965-0393/18/1/015010

D. Tabor, The hardness of metals, 1951.

T. Takaki and Y. Tomita, Static recrystallization simulations starting from predicted deformation microstructure by coupling multi-phase-field method and finite element method based on crystal plasticity, International Journal of Mechanical Sciences, vol.52, issue.2, pp.320-328, 2010.
DOI : 10.1016/j.ijmecsci.2009.09.037

R. A. Vandermeer and W. B. Snyder, Recovery and recrystallization in rolled tantalum single crystals, Metallurgical Transactions A, vol.11, issue.8, pp.1031-1044, 1979.
DOI : 10.1007/BF02811649

M. Viltange, Formation of annealing twins during recrystallization of high-purity iron, Comptes Rendus Hebdomadaires Des Séances De L'Academie Des Sciences Serie C, pp.69-71, 1975.

A. Vorhauer, S. Scheriau, and R. Pippan, In -Situ Annealing of Severe Plastic-Deformed OFHC Copper, Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, pp.39-908, 2008.
DOI : 10.1007/s11661-007-9409-x

R. Wasilewski, Annealing twins and twin-boundary intersections in niobium, Acta Metallurgica, vol.14, issue.3, pp.433-436, 1966.
DOI : 10.1016/0001-6160(66)90102-7

R. Wasilewski, B.C.C. stacking fault energies, Scripta Metallurgica, vol.1, issue.1, pp.45-47, 1967.
DOI : 10.1016/0036-9748(67)90012-9

D. S. Weaver and S. L. Semiatin, Recrystallization and grain-growth behavior of a nickel-base superalloy during multi-hit deformation, Scripta Materialia, vol.57, issue.11, pp.1044-1047, 2007.
DOI : 10.1016/j.scriptamat.2007.07.033

Q. Wei, Microstructure and mechanical properties of tantalum after equal channel angular extrusion (ECAE), Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, pp.266-272, 2003.
DOI : 10.1016/S0921-5093(03)00305-8

D. Weygand, Y. Brechet, and J. Lepinoux, A Vertex Simulation of Grain Growth in 2D and 3D, Advanced Engineering Materials, vol.3, issue.1-2, pp.67-71, 2001.
DOI : 10.1002/1527-2648(200101)3:1/2<67::AID-ADEM67>3.0.CO;2-P

A. J. Wilkinson and D. J. Dingley, Quantitative deformation studies using electron back scatter patterns, Acta Metallurgica et Materialia, vol.39, issue.12, pp.3047-3055, 1991.
DOI : 10.1016/0956-7151(91)90037-2

Y. Yogo, K. Tanaka, and K. Nakanishi, <i>In Situ</i> Observation of Grain Growth and Recrystallization of Steel at High Temperature, Materials Science Forum, vol.638, issue.642, pp.638-6421077, 2010.
DOI : 10.4028/www.scientific.net/MSF.638-642.1077

Y. Zhang, A. Godfrey, D. Jensen, and . Juul, Local boundary migration during recrystallization in pure aluminium, Scripta Materialia, vol.64, issue.4, pp.331-334, 2011.
DOI : 10.1016/j.scriptamat.2010.10.028

H. Zhao, A Variational Level Set Approach to Multiphase Motion, Journal of Computational Physics, vol.127, issue.1, pp.179-195, 1996.
DOI : 10.1006/jcph.1996.0167

H. Zurob, Y. Brechet, and J. Dunlop, Quantitative criterion for recrystallization nucleation in single-phase alloys: Prediction of critical strains and incubation times, Acta Materialia, vol.54, issue.15, pp.3983-3990, 2006.
DOI : 10.1016/j.actamat.2006.04.028
URL : https://hal.archives-ouvertes.fr/hal-00140265