S. Agouti, Etude de l'origine de défauts détectés dans des pièces en alliage d'aluminium de la série 7XXX destinées à l'industrie aéronautique, 2012.

&. P. Altintas and . Lee, A General Mechanics and Dynamics Model for Helical End Mills, CIRP Annals - Manufacturing Technology, vol.45, issue.1, pp.59-64, 1996.
DOI : 10.1016/S0007-8506(07)63017-0

&. Z. Altintas and . Kilic, Generalized dynamic model of metal cutting operations, CIRP Annals - Manufacturing Technology, vol.62, issue.1, pp.47-50, 2013.
DOI : 10.1016/j.cirp.2013.03.034

]. E. Armarego-69, &. R. Armarego, and . Brown, The Machining of Metals, 1969.

E. J. Armarego and &. C. Epp, An investigation of zero helix peripheral up-milling, International Journal of Machine Tool Design and Research, vol.10, issue.2, pp.273-291, 1970.
DOI : 10.1016/0020-7357(70)90011-9

E. J. Armarego and &. C. Cheng, Drilling with flat rake face and conventional twist drills???I. Theoretical investigation, International Journal of Machine Tool Design and Research, vol.12, issue.1, pp.17-35, 1972.
DOI : 10.1016/0020-7357(72)90009-1

E. J. Armarego and &. R. Whitfield, Computer Based Modelling of Popular Machining Operations for Force and Power Prediction, CIRP Annals - Manufacturing Technology, vol.34, issue.1, pp.65-69, 1985.
DOI : 10.1016/S0007-8506(07)61725-9

E. J. Armarego and &. P. Samaranayake, PERFORMANCE PREDICTION MODELS FOR TURNING WITH ROUNDED CORNER PLANE FACED LATHE TOOLS. I. THEORETICAL DEVELOPMENT, Machining Science and Technology, vol.4, issue.2, pp.143-172, 1999.
DOI : 10.1049/jipe.1949.0026

E. J. Armarego, The Unified-Generalised Mechanics of Cutting Approach -A Step Towards a House of Predictive Performance Models for Machining Operations, Proc. of the 3 rd CIRP International Workshop on Modelling of Machining Operations, pp.6-24, 2000.

]. D. Biermann, P. Kersting, and &. T. Surmann, A general approach to simulating workpiece vibrations during five-axis milling of turbine blades, CIRP Annals - Manufacturing Technology, vol.59, issue.1, pp.125-128, 2010.
DOI : 10.1016/j.cirp.2010.03.057

S. Bissey, G. Poulachon, F. Lapujoulade, J. Giessler, and &. M. Demesy, Optimization of Milling Cutter Geometries for HSC- Machining, Proc. of the 4 th International Conference on Metal Cutting and High Speed Machining, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00021201

]. S. Bissey, Développement d'un modèle d'efforts de coupe applicable à des familles d'outils : Cas du fraisage des aciers traités thermiquement, Thèse de doctorat, Ecole Nationale Supérieure d'Arts et Métiers, 2005.

S. Bissey-breton, G. Poulachon, and &. F. Lapujoulade, Integration of Tool Geometry in Prediction of Cutting Forces During Milling of Hard Materials, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol.42, issue.4, pp.579-587, 2006.
DOI : 10.1243/09544054JEM154

&. P. Bergheau, F. Gilles, T. Bourgeon, S. Cambay, &. T. De-freslon et al., Identification of a Friction Model -Application to the Context of Dry Cutting of an AISI 316L Austenitic Stainless Steel with a TiN Coated Carbide Tool, Procédé ECAP -Equal Channel Angular Pressing. Application au cuivre Cu-OFE. Rapport de Projet Métier, Arts et Métiers ParisTech, pp.1211-1223, 2008.

]. K. Bouzakis, N. Michailidis, G. Skordaris, and &. E. Bouzakis, Cutting Edge Preparation of Coated Tools (Co-operative Work within STC-C), CIRP January Meetings, issue.11, 2011.

R. H. Brown and &. J. Armarego, Oblique machining with a single cutting edge, International Journal of Machine Tool Design and Research, vol.4, issue.1, pp.9-25, 1964.
DOI : 10.1016/0020-7357(64)90006-X

E. Budak and &. Y. Altintas, Modeling and avoidance of static form errors in peripheral milling of plates, International Journal of Machine Tools and Manufacture, vol.35, issue.3, pp.459-476, 1995.
DOI : 10.1016/0890-6955(94)P2628-S

]. E. Budak, Y. Altintas, and &. E. Armarego, Prediction of Milling Force Coefficients From Orthogonal Cutting Data, Journal of Manufacturing Science and Engineering, vol.118, issue.2, pp.216-224, 1996.
DOI : 10.1115/1.2831014

O. Cahuc, P. Darnis, A. Gérard, and &. J. Battaglia, Experimental and Analytical Balance Sheet in Turning Applications, The International Journal of Advanced Manufacturing Technology, vol.18, issue.9, pp.648-656, 2001.
DOI : 10.1007/s001700170025

URL : https://hal.archives-ouvertes.fr/hal-00179143

S. Campocasso, J. P. Costes, G. Poulachon, and &. A. Perez-duarte, Cutting Forces Modeling in Finish Turning of Inconel 718 Alloy with Round Inserts, Proc. of the 13 th CIRP Conference on Modeling Machining Operations, pp.75-84, 2011.
DOI : 10.4028/www.scientific.net/AMR.223.75

URL : https://hal.archives-ouvertes.fr/hal-00724304

S. Campocasso, F. Trapet, J. P. Costes, G. Fromentin, S. Bissey-breton et al., Identification d'un modèle d'efforts de coupe mécanistique et application dans le cas d'un contournage de cuivre pur, Proc. of the 7 ème Conférence Machines et Usinage à Grande Vitesse, 2012.

S. Campocasso, J. P. Costes, G. Fromentin, S. Bissey-breton, and &. G. Poulachon, Improvement of Cutting Forces Modeling Based on Oriented Cutting Tests, Proc. of the 14 th CIRP Conference on Modeling Machining Operations, pp.206-211, 2013.
DOI : 10.1016/j.procir.2013.06.090

URL : https://hal.archives-ouvertes.fr/hal-00905278

T. Carlsson, T. Stjernstoft, and &. B. Lindström, A model for calculation of the geometrical shape of the cutting tool ??? work piece interface, CIRP Annals - Manufacturing Technology, vol.50, issue.1, pp.41-44, 2001.
DOI : 10.1016/S0007-8506(07)62066-6

J. Chaves-jacob, Développement d'une méthodologie de réduction des défauts géométriques : Application à l'usinage 5-axes de composants de turbomachine, Thèse de doctorat, Arts et Métiers ParisTech, 2009.

]. L. Colwell, Predicting the Angle of Chip Flow for Single Point Cutting Tools, Transactions of the American Society of Mechanical Engineers, vol.76, issue.2, pp.199-204, 1954.

[. , L. J. Vallée-10-]-c, and . De-la-vallée-poussin, Sur la méthode de l'approximation minimum, Annales de la société scientifique de Bruxelles, pp.1-16, 1910.

J. Denavit and &. R. Hartenberg, A Kinematic Notation for Lower- Pair Mechanisms Based on Matrices, Journal of Applied Mechanics, vol.22, issue.2, pp.215-221, 1955.

M. Reichstein and &. J. Köhler, Influence of the Captured Border on Cutting Forces in Turning Processes, Proc. of the 9 th CIRP International Workshop on Modeling of Machining Operations, pp.233-238, 2006.

B. Denkena and &. J. Köhler, CONSIDERATION OF THE FORM OF THE UNDEFORMED SECTION OF CUT IN THE CALCULATION OF MACHINING FORCES, Machining Science and Technology, vol.1, issue.4, pp.455-470, 2006.
DOI : 10.1016/S0007-8506(07)63356-3

]. A. Deschamps, Génèse des microstructures. Action Nationale de Formation CNRS "Métallurgie Fondamentale, 2012.

K. F. Ehmann, S. G. Kapoor, R. E. Devor, and &. I. Lazoglu, Machining Process Modeling: A Review, Journal of Manufacturing Science and Engineering, vol.119, issue.4B, pp.655-663, 1997.
DOI : 10.1115/1.2836805

]. S. Engin-01a, &. Y. Engin, and . Altintas, Mechanics and dynamics of general milling cutters., International Journal of Machine Tools and Manufacture, vol.41, issue.15, pp.2195-2212, 2001.
DOI : 10.1016/S0890-6955(01)00045-1

]. S. Engin-01b, &. Y. Engin, and . Altintas, Mechanics and dynamics of general milling cutters., International Journal of Machine Tools and Manufacture, vol.41, issue.15, pp.2213-2231, 2001.
DOI : 10.1016/S0890-6955(01)00046-3

]. R. Fletcher and &. M. Reeves, Function minimization by conjugate gradients, The Computer Journal, vol.7, issue.2, pp.149-154, 1964.
DOI : 10.1093/comjnl/7.2.149

URL : http://comjnl.oxfordjournals.org/cgi/content/short/7/2/149

M. Fontaine, A. Devillez, and &. D. Dudzinski, Optimisation de la géométrie d'outil en fraisage à partir de la prédiction analytique des efforts de coupe, Proc. of 18 ème Congrès Français de Mécanique, 2007.

M. Fontaine, L. Lambert-campagne, and &. A. , Maurel-Pantel. Reconstruction 3D d'outils coupants pour le contrôle géométrique des fraises et la modélisation du fraisage, Proc. of 19 ème Congrès Français de Mécanique, 2009.

]. G. Fromentin, A. C. Araujo, G. Poulachon, and &. Y. Paire, Mod??lisation g??ometrique du filetage ?? la fraise, M??canique & Industries, vol.12, issue.6, pp.469-477, 2011.
DOI : 10.1051/meca/2011144

R. B. Fussell, &. J. Jerard, and . Hemmett, Robust Feedrate Selection for 3-Axis NC Machining Using Discrete Models, Journal of Manufacturing Science and Engineering, vol.123, issue.2, pp.214-224, 2001.
DOI : 10.1115/1.1365398

]. G. Gary-02 and . Gary, Comportement des métaux à grande vitesse de déformation, Modélisation. Techniques de l'Ingénieur, 2002.

]. C. Gaudillière, Cisaillage à grande vitesse : des essais à la simulation, Thèse de doctorat, Arts et Métiers ParisTech, 2011.

N. Goubot, Application du test d'expansion d'anneau à l'étude du comportement dynamique du cuivre, Thèse de doctorat, 1994.

]. F. Goulette-99 and . Goulette, Modélisation 3D automatique -Outils de géométrie différentielle, 1999.

A. Gouskov, A. Moisan, D. Brun-picard, and &. G. Moraru, Application of the Dimensional Analysis to the Determination of Cutting Forces, Proc. of the 3 rd International Conference on Metal Cutting and High Speed Machining, pp.35-42, 2001.

J. Gravier, Impact de l'usinage de superfinition sur la zone affectée par le procédé, Thèse de doctorat, 2009.

N. Guillemot, M. Winter, A. Souto-lebel, C. Lartigue, and &. R. Billardon, 3D Heat Transfer Analysis for a Hybrid Approach to Predict Residual Stresses After Ball-End Milling, Procedia Engineering, vol.19, pp.125-131, 2011.
DOI : 10.1016/j.proeng.2011.11.090

&. I. Guzel and . Lazoglu, Increasing productivity in sculpture surface machining via off-line piecewise variable feedrate scheduling based on the force system model, International Journal of Machine Tools and Manufacture, vol.44, issue.1, pp.21-28, 2004.
DOI : 10.1016/j.ijmachtools.2003.08.014

E. O. Hall, The Deformation and Ageing of Mild Steel: III Discussion of Results, Proc. of the Physical Society, pp.747-753, 1951.
DOI : 10.1088/0370-1301/64/9/303

]. S. Han-min-82 and . Han-min, A new method for analysing and calculating angles on cutting tools, International Journal of Machine Tool Design and Research, vol.22, issue.3, pp.177-196, 1982.
DOI : 10.1016/0020-7357(82)90025-7

W. F. Hastings, P. L. Oxley, and &. M. Stevenson, Predicting a material's machining characteristics using flow stress properties obtained from high???speed compression tests, Proc. of the Institution of Mechanical Engineers, pp.245-252, 1974.
DOI : 10.1243/PIME_PROC_1974_188_027_02

]. A. Hor, Simulation physique des conditions thermomécaniques de forgeage et d'usinage -Caractérisation et modélisation de la rhéologie et de l'endommagement, Thèse de doctorat, Arts et Métiers ParisTech, 2011.

T. Horita, &. T. Fujinami, and . Langdon, The potential for scaling ECAP: effect of sample size on grain refinement and mechanical properties, Materials Science and Engineering: A, vol.318, issue.1-2, pp.1-2, 2001.
DOI : 10.1016/S0921-5093(01)01339-9

J. F. Hsieh and &. D. Lin, Mathematical model of multiflute drill point, International Journal of Machine Tools and Manufacture, vol.42, issue.10, pp.1181-1193, 2002.
DOI : 10.1016/S0890-6955(02)00044-5

J. F. Hsieh, Mathematical modeling of interrelationships among cutting angles, setting angles and working angles of single-point cutting tools, Applied Mathematical Modelling, vol.34, issue.10, pp.2738-2748, 2010.
DOI : 10.1016/j.apm.2009.12.009

&. S. Huang and . Liang, Force modelling in shallow cuts with large negative rake angle and large nose radius tools?application to hard turning, The International Journal of Advanced Manufacturing Technology, vol.22, issue.9-10, pp.626-632, 2003.
DOI : 10.1007/s00170-003-1550-0

&. M. Huang and . Morehead, Study of Machining-Induced Microstructure Variations of Nanostructured/Ultrafine-Grained Copper Using XRD, Journal of Engineering Materials and Technology, vol.133, issue.2, 2011.
DOI : 10.1115/1.4003105

Y. Iwahashi, J. Wang, Z. Horita, M. Nemoto, and &. T. Langdon, Principle of equal-channel angular pressing for the processing of ultra-fine grained materials, Scripta Materialia, vol.35, issue.2, pp.143-146, 1996.
DOI : 10.1016/1359-6462(96)00107-8

]. G. Johnson and &. W. Cook, A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates and High Temperatures, Proc. of the 7 th International Symposium on Ballistics, pp.541-547, 1983.

S. G. Kapoor, R. E. Devor, R. Zhu, R. Gajjela, G. Parakkal et al., DEVELOPMENT OF MECHANISTIC MODELS FOR THE PREDICTION OF MACHINING PERFORMANCE: MODEL BUILDING METHODOLOGY, Machining Science and Technology, vol.2, issue.2, pp.213-238, 1998.
DOI : 10.1080/10940349808945669

I. A. Kattan and &. K. Currie, Developing new trends of cutting tool geometry, Journal of Materials Processing Technology, vol.61, issue.1-2, pp.231-237, 1996.
DOI : 10.1016/0924-0136(96)02492-2

M. Kaymakci, Z. M. Kilic, and &. Y. Altintas, Unified cutting force model for turning, boring, drilling and milling operations, International Journal of Machine Tools and Manufacture, vol.54, issue.55, pp.54-55, 2012.
DOI : 10.1016/j.ijmachtools.2011.12.008

R. Khettabi, V. Songmene, and &. J. Masounave, Effect of tool lead angle and chip formation mode on dust emission in dry cutting, Journal of Materials Processing Technology, vol.194, issue.1-3, pp.1-3, 2007.
DOI : 10.1016/j.jmatprotec.2007.04.005

O. Kienzle and &. H. Victor, Spezifische Schnittkräfte bei der Metallbearbeitung, Werkstattstechnik und Maschinenbau, vol.47, pp.224-225, 1957.

A. Klimchik, D. Bondarenko, A. Pashkevich, S. Briot, and &. B. Furet, Compensation of Tool Deflection in Robotic-Based Milling
URL : https://hal.archives-ouvertes.fr/hal-00700003

J. H. Ko and &. W. Cho, 3D Ball-End Milling Force Model using Instantaneous Cutting Force Coefficients, Journal of Manufacturing Science and Engineering, vol.127, issue.1, pp.1-12, 2005.

F. Koenigsberger and &. A. Sabberwal, An investigation into the cutting force pulsations during milling operations, International Journal of Machine Tool Design and Research, vol.1, issue.1-2, pp.15-33, 1961.
DOI : 10.1016/0020-7357(61)90041-5

H. Kolsky, An Investigation of the Mechanical Properties of Materials at very High Rates of Loading, Proc. of the Physical Society, pp.676-700, 1949.
DOI : 10.1088/0370-1301/62/11/302

R. Komanduri, M. Lee, and &. M. Raff, The significance of normal rake in oblique machining, International Journal of Machine Tools and Manufacture, vol.44, issue.10, pp.1115-1124, 2004.
DOI : 10.1016/j.ijmachtools.2004.02.015

F. Lapujoulade and &. A. Khellouki, Identification de lois de coupe en fraisage latéral à partir d'essais de tournage, Proc. of Integrated Design and Production CPI'2003, 2003.

A. Larue and &. B. Anselmetti, Deviation of a machined surface in flank milling, International Journal of Machine Tools and Manufacture, vol.43, issue.2, pp.129-138, 2003.
DOI : 10.1016/S0890-6955(02)00189-X

URL : https://hal.archives-ouvertes.fr/hal-00098366

I. Lazoglu, R. S. Lee, and &. H. She, Sculpture surface machining: a generalized model of ball-end milling force system, International Journal of Machine Tools and Manufacture, vol.43, issue.5, pp.453-462, 1997.
DOI : 10.1016/S0890-6955(02)00302-4

P. Lorong, A. Larue, and &. A. Perez-duarte, Dynamic Study of Thin Wall Part Turning, Proc. of the 13 th CIRP Conference on Modeling Machining Operations, pp.591-599, 2011.
DOI : 10.4028/www.scientific.net/AMR.223.591

URL : https://hal.archives-ouvertes.fr/hal-01188927

]. D. Lucca-91, R. L. Lucca, &. R. Rhorer, and . Komanduri, Energy Dissipation in the Ultraprecision Machining of Copper, CIRP Annals - Manufacturing Technology, vol.40, issue.1, pp.69-72, 1991.
DOI : 10.1016/S0007-8506(07)61936-2

N. Lugo, N. Llorca, J. M. Cabrera, and &. Z. Horita, Microstructures and mechanical properties of pure copper deformed severely by equal-channel angular pressing and high pressure torsion, Materials Science and Engineering: A, vol.477, issue.1-2, pp.1-2, 2008.
DOI : 10.1016/j.msea.2007.05.083

N. Lugo, N. Llorca, J. J. Suñol, and &. J. Cabrera, Thermal stability of ultrafine grains size of pure copper obtained by equal-channel angular pressing, Journal of Materials Science, vol.57, issue.470, pp.2264-2273, 2010.
DOI : 10.1007/s10853-009-4139-7

M. E. Merchant, Basic Mechanics of the Metal Cutting Process, Journal of Applied Mechanics, vol.11, pp.168-175, 1944.

]. A. Mishra-07a, B. K. Mishra, F. Kad, &. M. Gregori, and . Meyers, Microstructural evolution in copper subjected to severe plastic deformation: Experiments and analysis, Acta Materialia, vol.55, issue.1, pp.13-28, 2007.
DOI : 10.1016/j.actamat.2006.07.008

]. R. Mishra-07b, &. M. Mishra, and . Mahoney, Friction Stir Welding and Processing, 2007.

A. Mishra, M. Martin, N. N. Thadhani, B. K. Kad, E. A. Kenik et al., High-strain-rate response of ultra-fine-grained copper, Acta Materialia, vol.56, issue.12, pp.2770-2783, 2008.
DOI : 10.1016/j.actamat.2008.02.023

G. Molodova, M. Gottstein, &. R. Winning, and . Hellmig, Thermal stability of ECAP processed pure copper, Références bibliographiques [Mondelin 12] A. Mondelin, F. Valiorgue, J. Rech, M. Coret & E. Feulvarch. Hybrid Model for the Prediction of Residual Stresses Induced by 15- 5PH Steel Turning, pp.460-461, 2007.
DOI : 10.1016/j.msea.2007.01.042

M. Morehead, Y. Huang, and &. Hartwig, Machinability of ultrafine-grained copper using tungsten carbide and polycrystalline diamond tools, International Journal of Machine Tools and Manufacture, vol.47, issue.2, pp.286-293, 2007.
DOI : 10.1016/j.ijmachtools.2006.03.014

T. Moriwaki and &. K. Okuda, Machinability of Copper in Ultra-Precision Micro Diamond Cutting, CIRP Annals - Manufacturing Technology, vol.38, issue.1, pp.115-118, 1989.
DOI : 10.1016/S0007-8506(07)62664-X

T. Moriwaki, N. Sugimura, and &. S. Luan, Combined Stress, Material Flow and Heat Analysis of Orthogonal Micromachining of Copper, CIRP Annals - Manufacturing Technology, vol.42, issue.1, pp.75-78, 1993.
DOI : 10.1016/S0007-8506(07)62395-6

A. Moufki and &. A. Molinari, A new thermomechanical model of cutting applied to turning operations. Part II. Parametric study, International Journal of Machine Tools and Manufacture, vol.45, issue.2, pp.181-193, 2005.
DOI : 10.1016/j.ijmachtools.2004.07.005

]. R. Nair, K. Danai, and &. S. Malkin, Turning Process Identification Through Force Transients, Journal of Manufacturing Science and Engineering, vol.114, issue.1, pp.1-7, 1992.
DOI : 10.1115/1.2899754

&. K. Arai and . Takei, Semi-Empirical Equations for Three Components of Resultant Cutting Force, CIRP Annals- Manufacturing Technology, vol.32, issue.1, pp.33-35, 1983.

V. C. Noordin, S. Venkatesh, S. Sharif, &. A. Elting, and . Abdullah, Application of response surface methodology in describing the performance of coated carbide tools when turning AISI 1045 steel, Journal of Materials Processing Technology, vol.145, issue.1, pp.46-58, 2004.
DOI : 10.1016/S0924-0136(03)00861-6

]. J. Outeiro and &. V. Astakhov, The Role of the Relative Tool Sharpness in Modelling of the Cutting Process, Proc. of the 8 th CIRP International Workshop on Modeling of Machining Operations, pp.517-523, 2005.

G. Paris, &. R. Peigne, and . Mayer, Surface shape prediction in high speed milling, International Journal of Machine Tools and Manufacture, vol.44, issue.15, pp.1567-1576, 2004.
DOI : 10.1016/j.ijmachtools.2004.06.005

H. Paris, D. Brissaud, and &. A. Gouskov, A More Realistic Cutting Force Model at Uncut Chip Thickness Close to Zero, CIRP Annals - Manufacturing Technology, vol.56, issue.1, pp.415-418, 2007.
DOI : 10.1016/j.cirp.2007.05.096

URL : https://hal.archives-ouvertes.fr/hal-00181779

N. J. Petch, The Cleavage Strength of Polycrystals, Références bibliographiques, pp.25-28, 1953.

D. Petit and &. D. Maillet, Techniques inverses et estimation de paramètres, pp.4515-4516, 2008.

G. Petropoulos, I. Ntziantzias, and &. C. Anghel, A Predictive Model of Cutting Force in Turning using Taguchi and Response Surface Techniques, Proc. of 1 st IC-EpsMsO, 2005.

J. Pujana, P. J. Arrazola, R. M. Saoubi, and &. H. Chandrasekaran, Analysis of the inverse identification of constitutive equations applied in orthogonal cutting process, International Journal of Machine Tools and Manufacture, vol.47, issue.14, pp.2153-2161, 2007.
DOI : 10.1016/j.ijmachtools.2007.04.012

M. H. Raffles, K. Kolluru, D. Axinte, and &. H. Llewellyn-powell, Assessment of adhesive fixture system under static and dynamic loading conditions, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol.227, issue.2, pp.267-280, 2013.
DOI : 10.1177/0954405412468217

R. G. Reddy, S. G. Kapoor, and &. R. Devor, A Mechanistic Force Model for Contour Turning, Journal of Manufacturing Science and Engineering, vol.122, issue.3, pp.398-405, 2000.
DOI : 10.1115/1.1285900

]. E. Rivière-07b, J. Rivière-lorphèvre, E. De-arizon, &. P. Filippi, and . Dehombreux, Cutting Forces Parameters Evaluation in Milling using Genetic Algorithm, Proc. of the 10 th CIRP International Workshop on Modeling Machining Operations, pp.237-243, 2007.

]. J. Russell and &. H. Brown, The measurement of chip flow direction, International Journal of Machine Tool Design and Research, vol.6, issue.3, pp.129-138, 1966.
DOI : 10.1016/0020-7357(66)90018-7

A. J. Sabberwal, Chip Section and Cutting Force during the Milling Operation, Annals of the CIRP, vol.10, issue.3, pp.197-203, 1961.

S. Saikumar and &. M. Shunmugam, Development of a feed rate adaption control system for high-speed rough and finish end-milling of hardened EN24 steel, The International Journal of Advanced Manufacturing Technology, vol.4, issue.3, pp.869-884, 2012.
DOI : 10.1007/s00170-011-3561-6

K. Sambhav, A. Kumar, and &. S. Choudhury, Mechanistic force modeling of single point cutting tool in terms of grinding angles, International Journal of Machine Tools and Manufacture, vol.51, issue.10-11, pp.10-11, 2011.
DOI : 10.1016/j.ijmachtools.2011.06.007

M. Sève, Modélisation des efforts de coupe lors de l'opération de profilage de finition d'un alliage de titane Ti6Al4V, Arts et Métiers ParisTech, 2011.

M. C. Shaw, N. H. Cook, and &. P. Smith, The Mechanics of Three- Dimensional Cutting Operations, Transactions of the American Society of Mechanical Engineers, vol.74, pp.1055-1064, 1952.

G. V. Stabler, The fundamental geometry of cutting tools, Proc. of the Institution of Mechanical Engineers, pp.14-26, 1951.
DOI : 10.1243/PIME_PROC_1951_165_008_02

G. V. Stabler, The Chip Flow Law and its Consequences Advances in Machine Tool Design and Research, pp.243-251, 1964.

B. Storch and &. A. Zawada-tomkiewicz, Distribution of unit forces on the tool nose rounding in the case of constrained turning, International Journal of Machine Tools and Manufacture, vol.57, pp.1-9, 2012.
DOI : 10.1016/j.ijmachtools.2012.01.011

Q. Suel, Etude de l'influence des paramètres locaux sur les efforts en chariotage de finition de l'alliage de titane Ti6Al4V, Arts et Métiers ParisTech, p.2012

]. E. Thomsen, J. T. Lapsley, and &. R. Grassi, Deformation Work Absorbed by the Workpiece During Metal Cutting, Transactions of the American Society of Mechanical Engineers, vol.75, pp.591-603, 1953.

J. Tlusty and &. M. Polacek, The Stability of Machine Tool Against Self-Excited Vibrations in Machining, Proc. of the International Production Engineering Research Conference, pp.465-474, 1963.

J. Tlusty and &. P. Macneil, Dynamics of Cutting Forces in End Milling, Annals of the CIRP, vol.24, issue.1, pp.21-25, 1975.

S. Toma?ic and &. S. Stan?in, Simultaneous Orthogonal Rotations Angle, Elektrotehni?ki Vestnik, vol.78, issue.12, pp.7-11, 2011.

F. Trapet, Etude des effets du rayon de bec de l'outil sur les efforts de coupe en tournage, Application au cuivre Cu-OFE. Mémoire de Master, Arts et Métiers ParisTech, p.2012

T. Ueda, M. Sato, and &. K. Nakayama, The Temperature of a Single Crystal Diamond Tool in Turning, Références bibliographiques [Ueda 98], pp.41-44, 1998.
DOI : 10.1016/S0007-8506(07)62781-4

]. R. Valiev and &. T. Langdon, Principles of equal-channel angular pressing as a processing tool for grain refinement, Progress in Materials Science, vol.51, issue.7, pp.881-981, 2006.
DOI : 10.1016/j.pmatsci.2006.02.003

F. Valiorgue, J. Rech, H. Hamdi, P. Gilles, and &. J. Bergheau, A new approach for the modelling of residual stresses induced by turning of 316L, Journal of Materials Processing Technology, vol.191, issue.1-3, pp.1-3, 2007.
DOI : 10.1016/j.jmatprotec.2007.03.021

A. Van-gorp, Moyens et méthodes d'analyse des états de surface, Master IMS, Arts et Métiers ParisTech, 2012.

C. A. Van-luttervelt, T. H. Childs, I. S. Jawahir, F. Klocke, P. K. Venuvinod et al., Present Situation and Future Trends in Modelling of Machining Operations Progress Report of the CIRP Working Group ???Modelling of Machining Operations???, CIRP Annals - Manufacturing Technology, vol.47, issue.2, pp.587-626, 1998.
DOI : 10.1016/S0007-8506(07)63244-2

V. C. Venkatesh, I. A. Kattan, D. Hoy, C. T. Ye, and &. J. Vankirk, An analysis of cutting tools with negative side cutting edge angles, Journal of Materials Processing Technology, vol.58, issue.4, pp.351-361, 1996.
DOI : 10.1016/0924-0136(95)02207-4

M. Wang, B. Xu, S. Dong, J. Zhang, and &. S. Wei, Experimental investigations of cutting parameters influence on cutting forces in turning of Fe-based amorphous overlay for remanufacture, The International Journal of Advanced Manufacturing Technology, vol.27, issue.5, pp.5-8, 2013.
DOI : 10.1007/s00170-012-4212-2

C. F. Wyen and &. K. Wegener, Influence of cutting edge radius on cutting forces in machining titanium, CIRP Annals - Manufacturing Technology, vol.59, issue.1, pp.93-96, 2010.
DOI : 10.1016/j.cirp.2010.03.056

H. T. Young, P. Mathew, and &. L. Oxley, Allowing for Nose Radius Effects in Predicting the Chip Flow Direction and Cutting Forces in Bar Turning, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol.201, issue.3, pp.213-226, 1987.
DOI : 10.1243/PIME_PROC_1987_201_108_02