W. Püttgen, W. Bleck, G. Hirt, and H. Shimahara, Thixoforming of Steels ??? A Status Report, Advanced Engineering Materials, vol.134, issue.5, pp.231-245, 2007.
DOI : 10.1002/adem.200700006

W. Loue and M. Suery, Microstructural evolution during partial remelting of Al???Si7Mg alloys, Materials Science and Engineering: A, vol.203, issue.1-2, pp.1-13, 1995.
DOI : 10.1016/0921-5093(95)09861-5

R. Qin and Z. Fan, Fractal theory study on morphological dependence of viscosity of semisolid slurries, Materials Science and Technology, vol.1103, issue.1940, pp.1149-1152, 2001.
DOI : 10.1007/BF02642580

J. Gurland, A structural approach to the yield strength of two-phase alloys with coarse microstructures, Materials Science and Engineering, vol.40, issue.1, pp.59-71, 1979.
DOI : 10.1016/0025-5416(79)90008-9

J. Chen and Z. Fan, Modelling of rheological behaviour of semisolid metal slurries Part 1 ??? Theory, Materials Science and Technology, vol.25, issue.3, pp.237-242, 2002.
DOI : 10.1179/026708301101511086

S. Zabler, A. Rueda, A. Rack, H. Riesemeier, P. Zaslansky et al., Coarsening of grain-refined semi-solid Al???Ge32 alloy: X-ray microtomography and in situ radiography, Acta Materialia, vol.55, issue.15, pp.5045-5055, 2007.
DOI : 10.1016/j.actamat.2007.05.028

N. Limodin, L. Salvo, M. Suéry, and M. Dimichiel, In situ investigation by X-ray tomography of the overall and local microstructural changes occurring during partial remelting of an Al???15.8wt.% Cu alloy, Acta Materialia, vol.55, issue.9, pp.3177-3191, 2007.
DOI : 10.1016/j.actamat.2007.01.027
URL : https://hal.archives-ouvertes.fr/hal-00197082

S. Terzi, L. Salvo, M. Suery, A. Dahle, and E. Boller, Coarsening mechanisms in a dendritic Al???10% Cu alloy, Acta Materialia, vol.58, issue.1, pp.20-30, 2010.
DOI : 10.1016/j.actamat.2009.08.052
URL : https://hal.archives-ouvertes.fr/hal-00456225

P. Kumar, C. Martin, and S. Brown, Shear rate thickening flow behavior of semisolid slurries, Metallurgical Transactions A, vol.76, issue.5, pp.1107-1116, 1993.
DOI : 10.1016/0022-0248(86)90021-7

Y. Yang and C. Tsao, Viscosity and structure variations of Al?Si alloy in the semi-solid state, Journal of Materials Science, vol.32, issue.8, pp.2087-2092, 1997.
DOI : 10.1023/A:1018522805543

Z. Fan, G. Liu, and M. Hitchcock, Solidification behaviour under intensive forced convection, Materials Science and Engineering: A, vol.413, issue.414, pp.413-414229, 2005.
DOI : 10.1016/j.msea.2005.09.037

K. Sukumaran, B. Pai, and M. Chakraborty, The effect of isothermal mechanical stirring on an Al???Si alloy in the semisolid condition, Materials Science and Engineering: A, vol.369, issue.1-2, pp.275-283, 2004.
DOI : 10.1016/j.msea.2003.11.036

D. Smith, J. Eady, L. Hogan, and D. Irwin, Crystallization of a faceted primary phase in a stirred slurry, Metallurgical Transactions A, vol.28, issue.2, pp.575-584, 1991.
DOI : 10.1007/BF00540873

S. Ji and Z. Fan, Solidification behavior of Sn-15 wt pct Pb alloy under a high shear rate and high intensity of turbulence during semisolid processing, Metallurgical and Materials Transactions A, vol.233, issue.11, pp.3511-3520, 2002.
DOI : 10.1007/s11661-002-0338-4

Y. Ryoo and D. Kim, Evolution of microstructure during semi-solid state processing of Mg-Al-Zn-X alloys, 3rd Int Conf on semisolid processing of alloys and composites, pp.95-104

G. Wan and P. Sahm, Particle growth by coalescence and Ostwald ripening in rheocasting of PbSn, Acta Metallurgica et Materialia, vol.38, issue.11, pp.2367-2372, 1990.
DOI : 10.1016/0956-7151(90)90104-O

S. Ji, K. Roberts, and Z. Fan, Isothermal coarsening of fine and spherical particles in semisolid slurry of Mg???9Al???1Zn alloy under low shear, Scripta Materialia, vol.55, issue.11, pp.971-974, 2006.
DOI : 10.1016/j.scriptamat.2006.08.041

H. Wang, C. Davidson, and D. Stjohn, Semisolid microstructural evolution of AlSi7Mg alloy during partial remelting, Materials Science and Engineering: A, vol.368, issue.1-2, pp.159-167, 2004.
DOI : 10.1016/j.msea.2003.10.305

J. Lecomte-beckers, A. Rassili, M. Carton, M. Robelet, and R. Koeune, Study of the Liquid Fraction and Thermophysical Properties of Semi-Solid Steels and Application to the Simulation of Inductive Heating for Thixoforming, Advanced Methods in Material Forming, 2005.
DOI : 10.1007/3-540-69845-0_20

J. Li, S. Sugiyama, J. Yanagimoto, Y. Chen, and G. Fan, Effect of inverse peritectic reaction on microstructural spheroidization in semi-solid state, Journal of Materials Processing Technology, vol.208, issue.1-3, pp.165-170, 2008.
DOI : 10.1016/j.jmatprotec.2007.12.106

R. Gasper, A. Schönbohm, M. Enning, and D. Abel, Flatness Based Control of Inductive Heating of X210CrW12 into the Semi Solid State. Semi-Solid Processing of Alloys and Composites X, pp.141-143127, 2008.

S. Midson, N. Nicholas, R. Nichting, and K. Young, Semi-solid forming high temperature alloys, the 2nd International Conference on the Processing of Semi-Solid Alloys and Composites, pp.140-148, 1992.

P. Kapranos, D. Kirkwood, and C. Sellars, Semi-solid processing of tool steel, Le Journal de Physique IV, vol.03, issue.C7, pp.835-840, 1993.
DOI : 10.1051/jp4:19937131
URL : https://hal.archives-ouvertes.fr/jpa-00251751

M. Kiuchi, S. Sugiyama, and M. Arai, Experimental study on mushy metal forming, Journal of the Japan Society for Technology of Plasticity, vol.37, pp.1219-1224, 1996.

A. Rassili, D. Fischer, M. Robelet, J. Dermurger, A. Cucatto et al., Improvement of materials and tools for thixoforming of steels (North American Die Casting Association), 8th International Conference on Semi-Solid Processing of Alloys and Composites, pp.533-543

B. Behrens, B. Haller, and D. Fischer, Thixoforging of Steel Using Ceramic Tool Materials, steel research international, vol.93, issue.10, pp.561-568, 2004.
DOI : 10.1002/srin.200405811

B. Nohm, U. Morjan, and D. Hartmann, Thixoforming of steel, 6th Inter Conf on Semi-solid Processing of Alloys and Composites, 2000.

M. Tsuchiya, H. Ueno, and I. Takagi, Research of semi solid casting of iron, JSAE Review, vol.24, issue.2, pp.205-214, 2003.
DOI : 10.1016/S0389-4304(03)00013-4

H. Bramann, M. Fehlbier, and P. Sahm, Buhrig-polaczek A: Casting of a cold work steel alloy in semi-solid state, Journal of Materials Processing Technology, pp.1357-1364, 2004.

G. Hirt, W. Bleck, A. Buhrig-polaczek, H. Shimahara, W. Puttgen et al., Semi solid casting and forging of steel. Solid State Phenomena, pp.116-11734, 2006.

R. Kopp, J. Kallweit, T. Möller, and I. Seidl, Forming and joining of commercial steel grades in the semisolid state, Journal of Materials Processing Technology, pp.130-131562, 2002.

R. 1. Püttgen, W. Bleck, and W. , DTA-Measurements to Determine the Thixoformability of Steels, steel research international, vol.8, issue.1, pp.531-536, 2004.
DOI : 10.1002/srin.200405807

R. Kopp, J. Kallweit, T. Möller, and I. Seidl, Forming and joining of commercial steel grades in the semisolid state, Journal of Materials Processing Technology, pp.130-131562, 2002.

P. Cézard, Impact des effets thermiques sur le comportement du matériau lors de la mise en forme des aciers à l'état semi-solide : Analyses expérimentale et numérique. Thesis. L'Ecole Nationale Supériure d'Arts et Métiers, 2006.

E. Becker, Investigations experimentales et numeriques pour l'identification des parametres clefs du procede de thixoforgeage de l'acier sur le produit mis en forme. Thesis. L'Ecole Nationale Supériure d'Arts et Métiers, 2008.
URL : https://hal.archives-ouvertes.fr/pastel-00004477

M. Orfeuil, Electric Process heating: Technologies/Equipment/Applications, 1981.

H. Jung and C. Kang, Reheating process of cast and wrought aluminum alloys for thixoforging and their globularization mechanism, Journal of Materials Processing Technology, vol.104, issue.3, pp.244-253, 2000.
DOI : 10.1016/S0924-0136(00)00576-8

E. Becker, V. Favier, R. Bigot, P. Cezard, and L. Langlois, Impact of experimental conditions on material response during forming of steel in semi-solid state, Journal of Materials Processing Technology, vol.210, issue.11, pp.1482-1492, 2010.
DOI : 10.1016/j.jmatprotec.2010.04.006
URL : https://hal.archives-ouvertes.fr/hal-01090556

E. Becker, R. Bigot, and L. Langlois, Thermal exchange effects on steel thixoforming processes. The International Journal of Advanced Manufacturing Technology, pp.913-924, 2009.
URL : https://hal.archives-ouvertes.fr/hal-01091012

G. Hirt, W. Bleck, A. Buhrig-polaczek, H. Shimahara, W. Puttgen et al., Semi solid casting and forging of steel. Solid State Phenomena, pp.116-11734, 2006.

H. Atkinson and A. Rassili, A review of the semi-solid processing of steel, International Journal of Material Forming, vol.54, issue.S1, pp.791-795, 2010.
DOI : 10.1007/s12289-010-0889-7

S. Bergsma, M. Tolle, M. Kassner, X. Li, and E. Evangelista, Semi-solid thermal transformations of Al???Si alloys and the resulting mechanical properties, Materials Science and Engineering: A, vol.237, issue.1, pp.24-34, 1997.
DOI : 10.1016/S0921-5093(97)00112-3

T. Liu, P. Ward, H. Atkinson, and D. Kirkwood, Response of semi-solid Sn-15 pct Pb to rapid shear-rate changes, Metallurgical and Materials Transactions A, vol.212, issue.2, pp.409-417, 2003.
DOI : 10.1007/s11661-003-0342-3

P. Seo and C. Kang, The effect of raw material fabrication process on microstructural characteristics in reheating process for semi-solid forming, Journal of Materials Processing Technology, vol.162, issue.163, pp.162-163402, 2005.
DOI : 10.1016/j.jmatprotec.2005.02.012

G. Hirt and R. Kopp, Thixoforming -semi-solid metal processing, 2009.

G. Herman, Image Reconstruction from Projections, 1980.

J. Heulens, B. Blanpain, and N. Moelans, Analysis of the isothermal crystallization of CaSiO3 in a CaO

M. Attallah, H. Terasaki, R. Moat, S. Bray, Y. Komizo et al., In-Situ observation of primary ????? melting in Ni-base superalloy using confocal laser scanning microscopy, Materials Characterization, vol.62, issue.8, pp.760-767, 2011.
DOI : 10.1016/j.matchar.2011.05.001

S. Wang, L. Gao, F. Huang, and X. Wang, Confocal laser scanning microscopy and its application in metallurgy, Metallurgical Analysis, vol.31, pp.40-45, 2011.

F. Yuan, G. Liang, G. Zhu, C. Wang, J. Wu et al., Confocal laser scanning microscopy and its application in in-situ observation of phase transformation of steel, Journal of Baosteel Technique, vol.6, pp.64-69, 2006.

D. Spencer, R. Mehrabian, and M. Flemings, Rheological behavior of Sn-15 pct Pb in the crystallization range, Metallurgical Transactions, vol.53, issue.7, pp.1925-1932, 1972.
DOI : 10.1007/BF02642580

M. Flemings, Solidification processing, Metallurgical Transactions, vol.5, issue.4, pp.2121-2134, 1974.
DOI : 10.1007/BF02643923

G. Hirt and R. Kopp, Thixoforming -semi-solid metal processing, 2009.

L. Pasternak, R. Carnaha, R. Decker, and R. Kilber, Semisolid production processing of Mg alloys by thixomolding, Proceedings of the 2nd International Conference on Semi-Solid Processing of Alloys and Composites, pp.159-169, 1992.

S. Ji, Z. Fan, and M. Bevis, Semi-solid processing of engineering alloys by a twin-screw rheomoulding process, Materials Science and Engineering: A, vol.299, issue.1-2, pp.210-217, 2001.
DOI : 10.1016/S0921-5093(00)01373-3

R. Kopp, J. Kallweit, T. Möller, and I. Seidl, Forming and joining of commercial steel grades in the semisolid state, Journal of Materials Processing Technology, pp.130-131562, 2002.

R. Song, Y. Kang, and A. Zhao, Semi-solid rolling process of steel strips, Journal of Materials Processing Technology, vol.198, issue.1-3, pp.291-299, 2008.
DOI : 10.1016/j.jmatprotec.2007.06.079

M. Flemings, Semi-solid forming -the process and the path forward, Metallurgical Science and Technology, vol.18, pp.3-4, 2000.

M. Flemings, R. Riek, and K. Young, Rheocasting, Materials Science and Engineering, vol.25, pp.103-117, 1976.
DOI : 10.1016/0025-5416(76)90057-4

M. Kenney, J. Courtois, R. Evans, G. Farrior, C. Kyonka et al., Semi-solid metal casting and forging, Metal handbook, pp.327-338

K. Young, Method of producing shaped metal parts. 4687042 edition, 1987.

R. Moschini, Manufacture of automotive components by semi liquid forming process, Proceedings of the 2nd International Conference on Semi-Solid Processing of Alloys and Composites; MIT, pp.149-158, 1992.

R. Mehrabian and M. Flemings, Metal composition and methods for preparing liquid-solid alloy metal compoitions and for casting the metal compositions, 1976.

M. Flemings, R. Mehrabian, and R. Riek, Continuous process for forming an alloy containing nondendritic primary solids. 3902544 edition. US: Massachusetts Institute of Technology, p.17, 1975.

K. Wang, H. Peng, N. Wang, and S. Wang, Method and apparatus for injection molding of semi-solid metals, 1996.

K. Zhang, X. Xue, J. Zhang, D. Du, J. Xu et al., Semi-solid slurry preparation and forming process, 2001.

M. Kiuchi and S. Sugiyama, A New Process to Manufacture Semi-solid Alloys., ISIJ International, vol.35, issue.6, pp.790-797, 1995.
DOI : 10.2355/isijinternational.35.790

G. Walmag, P. Naveau, A. Rassili, and M. Sinnaeve, A new processing route for as-cast thixotropic steel. Solid State Phenomena, Semi-Solid Processing of Alloys and Composites X, pp.415-420, 2008.

R. Shibata, T. Kaneuchi, and T. Soda, New semi-liquid metal casting process, Proceedings of the 4th International Conference on Semi-Solid Processing of Alloys and Composites, pp.296-300, 1996.

S. Sato, Y. Harada, N. Ishibashi, and M. Adachi, Effect of Strontium, Magnesium and Iron Content on Mechanical Properties of Rheocast Al-7 mass%Si-Mg Alloys, MATERIALS TRANSACTIONS, vol.50, issue.2, pp.354-360, 2009.
DOI : 10.2320/matertrans.F-MRA2008845

C. Hong and B. Kim, Development of an advanced rheocasting process and its applications. Solid State Phenomena, pp.116-11744, 2006.

W. Mao, Investigation of microstructure evolution of non-dendritic AlSi7Mg alloy in semi-solid state. Thesis, 1999.

A. Mitsuru, S. Hiroto, H. Yasunori, S. Tatsuo, and Y. Atsushi, Method and apparatus of shaping semisolid metals. EP 0745694 edition. EU: UBE Industires Ltd, 1996.

T. Haga and S. Suzuki, Casting of aluminum alloy ingots for thixoforming using a cooling slope, Journal of Materials Processing Technology, vol.118, issue.1-3, pp.169-172, 2001.
DOI : 10.1016/S0924-0136(01)00888-3

M. Flemings, M. Ayers, R. , D. Figueredo, A. Yurko et al., Metal alloy compositions and process. 6645323 edition. US: Massachusetts Institute of Technology, 2003.

J. Yurko, R. Martinez, and M. Flemings, Development of semisolid rheocasting (SSR) on Semi-Solid processing of Alloys and Composites; Japan: National Institute of Advanced Industrial Science and Technology, Japan Society for Technology of Plasticity, Proceedings of the 7th International Conference, pp.659-664, 2002.

G. Wang, T. Witulski, and G. Hirt, Thixoforming of aluminium alloys using modified chemical grain refinement for billet production, pp.29-36, 1994.

H. Wang and Z. Ning, Magnesium thixotropic structure produced by controlled nucleation method. Special Casting and Nonferrous Alloys, pp.316-319, 2007.

K. Young, C. Kyonka, and J. Courtois, Fine grained metal composition

R. Song, Y. Kang, and J. Sun, Microstructure evaluation of semi-solid steel materials in rolling process and the resulting mechanical properties, Acta Metallurgica Sinica, vol.14, pp.347-351, 2001.

M. Ramadan, M. Takita, and H. Nomura, Effect of semi-solid processing on solidification microstructure and mechanical properties of gray cast iron, Materials Science and Engineering: A, vol.417, issue.1-2, pp.166-173, 2006.
DOI : 10.1016/j.msea.2005.10.054

R. Bülte and W. Bleck, Effects of Pre-Processing on Thixoformability of Steel Grade 100Cr6, steel research international, vol.72, issue.7, pp.588-592, 2004.
DOI : 10.1002/srin.200405815

M. Omar, E. Palmiere, A. Howe, H. Atkinson, and P. Kapranos, Thixoforming of a high performance HP9/4/30 steel, Materials Science and Engineering: A, vol.395, issue.1-2, pp.53-61, 2005.
DOI : 10.1016/j.msea.2004.12.013

M. Omar, H. Atkinson, A. Howe, E. Palmiere, P. Kapranos et al., Solid???liquid structural break-up in M2 tool steel for semi-solid metal processing, Journal of Materials Science, vol.17, issue.7, pp.869-874, 2008.
DOI : 10.1007/s10853-008-3181-1

G. Hirt, K. Bobzin, L. Khizhnyakova, M. Ewering, and N. Bagcivan, Semi-solid forming of non axis-symmetric parts from steel grade X210CrW12 with PVD coated tools, International Journal of Material Forming, vol.9, issue.1, pp.731-734, 2010.
DOI : 10.1007/s12289-010-0874-1

J. Gabathuler, H. Huber, and J. Erling, Specific properties of produced parts using the thixocasting process. Metallurgia Italiana, pp.609-615, 1994.

S. Lebeau and R. Decker, Microstructural design of thixomolded magnesium alloys, 5th International Conference on Semi-Solid Processing of Alloys and Composites, pp.217-224, 1998.

P. Joly and R. Mehrabian, The rheology of a partially solid alloy, Journal of Materials Science, vol.17, issue.3, pp.1393-1418, 1976.
DOI : 10.1007/BF00540873

M. Flemings, Behavior of metal alloys in the semisolid state, Metallurgical Transactions A, vol.5, issue.4, pp.957-981, 1991.
DOI : 10.1007/BF02644681

D. Kirkwood, Semisolid metal processing, International Materials Reviews, vol.3, issue.1, pp.173-189, 1994.
DOI : 10.1016/0921-5093(91)90232-C

Z. Fan, Semisolid metal processing, International Materials Reviews, vol.11, issue.2, pp.49-85, 2002.
DOI : 10.1016/0956-716X(95)93218-S

O. Lashkari and R. Ghomashchi, The implication of rheology in semi-solid metal processes: An overview, Journal of Materials Processing Technology, vol.182, issue.1-3, pp.229-240, 2007.
DOI : 10.1016/j.jmatprotec.2006.08.003

D. Brabazon, D. Browne, and A. Carr, Experimental investigation of the transient and steady state rheological behaviour of Al???Si alloys in the mushy state, Materials Science and Engineering: A, vol.356, issue.1-2, pp.69-80, 2003.
DOI : 10.1016/S0921-5093(03)00158-8

D. Kirkwood, M. Suéry, P. Kapranos, H. Atkinson, and K. Young, Semi-solid Processing of Alloys, 2010.
DOI : 10.1007/978-3-642-00706-4

M. Modigell, J. Koke, R. Kopp, D. Neudenberger, P. Sahm et al., Comparison of rheological measurement methods for semi-solid alloys, 6th International Conference on Semi-Solid Processing of Alloys and Composites, pp.605-609, 2000.

O. Ludwig, J. Drezet, C. Martin, and M. Suéry, Rheological behavior of Al-Cu alloys during solidification constitutive modeling, experimental identification, and numerical study, Metallurgical and Materials Transactions A, vol.34, issue.222, pp.1525-1535, 2005.
DOI : 10.1007/s11661-005-0244-7
URL : https://hal.archives-ouvertes.fr/hal-00141312

H. Lehuy, J. Masounave, and J. Blain, Rheological behaviour and microstructure of stir-casting zinc-aluminium alloys, Journal of Materials Science, vol.9, issue.1, pp.105-113, 1985.
DOI : 10.1007/BF00555904

W. Nan, S. Guangji, and Y. Hanguo, Rheological Study of Partially Solidified Tin-Lead and Aluminium-Zinc Alloys for Stir-Casting, Materials Transactions, JIM, vol.31, issue.8, pp.715-722, 1990.
DOI : 10.2320/matertrans1989.31.715

T. Kattamis and T. Piccone, Rheology of semisolid Al-4.5%Cu-1.5%Mg alloy, Materials Science and Engineering: A, vol.131, issue.2, pp.265-272, 1991.
DOI : 10.1016/0921-5093(91)90403-A

W. Loue, S. Landkroon, and W. Kool, Rheology of partially solidified AlSi7Mg0.3 and the influence of SiC additions, Materials Science and Engineering: A, vol.151, issue.2, pp.255-262, 1992.
DOI : 10.1016/0921-5093(92)90214-L

L. Turng and K. Wang, Rheological behaviour and modelling of semi-solid Sn-15% Pb alloy, Journal of Materials Science, vol.20, issue.8, pp.2173-2183, 1991.
DOI : 10.1007/BF00549185

H. Chen, J. Chen, and J. Liao, The influence of shearing conditions on the rheology of semi-solid magnesium alloy, Materials Science and Engineering: A, vol.487, issue.1-2, pp.114-119, 2008.
DOI : 10.1016/j.msea.2007.09.072

L. Azzi and F. Ajersch, Development of alumnium base alloys for forming in semi solid state, TransAL Conference, pp.23-33, 2002.

O. Lashkari and R. Ghomashchi, ???The implication of rheological principles for characterization of semi-solid Al???Si cast billets???, Journal of Materials Science, vol.33, issue.Aug, pp.5958-5965, 2006.
DOI : 10.1007/s10853-006-0280-8

V. Laxmanan and M. Flemings, Deformation of semi-solid Sn-15 Pct Pb alloy, Metallurgical Transactions A, vol.13, issue.3, pp.1927-1937, 1980.
DOI : 10.1007/BF02655112

M. Suery and M. Flemings, Effect of Strain Rate on Deformation Behavior of Semi-Solid Dendritic Alloys, Metallurgical Transactions A, vol.41, issue.10, pp.1809-1819, 1982.
DOI : 10.1007/BF02647837

J. Yurko and M. Flemings, Rheology and microstructure of semi-solid aluminum alloys compressed in the drop-forge viscometer. Metallurgical and Materials Transactions A, pp.2737-2746, 2002.

E. Becker, R. Bigot, and L. Langlois, Thermal exchange effects on steel thixoforming processes. The International Journal of Advanced Manufacturing Technology, pp.913-924, 2009.
DOI : 10.1007/s00170-009-2353-8
URL : https://hal.archives-ouvertes.fr/hal-01091012

R. Bigot, V. Favier, and C. Rouff, Characterisation of semi-solid material mechanical behaviour by indentation test, Journal of Materials Processing Technology, vol.160, issue.1, pp.43-53, 2005.
DOI : 10.1016/j.jmatprotec.2004.03.016

M. Ferrante, E. Monilha, M. Sinka, V. Bhasin, A. Moore et al., Rheological properties and microstructural evolution of semi-solid aluminum alloys inoculated with mischmetal and with titanium, 5th International Conference Semisolid Processing of Alloys and Composites, pp.35-42, 1998.

C. Martin, D. Favier, and M. Suéry, Viscoplastic behaviour of porous metallic materials saturated with liquid part I: Constitutive equations, International Journal of Plasticity, vol.13, issue.3, pp.215-235, 1997.
DOI : 10.1016/S0749-6419(97)00009-0

M. Suery and A. Zavaliangos, Key problems in rheology of semi-solid alloys, Proceedings of the 6th International Conference on Semi-solid Processing of Alloys and Composites, pp.129-135

P. Kapranos, T. Liu, H. Atkinson, and D. Kirkwood, Investigation into the rapid compression of semi-solid alloy slugs, Journal of Materials Processing Technology, vol.111, issue.1-3, pp.31-36, 2001.
DOI : 10.1016/S0924-0136(01)00534-9

E. Tzimas and A. Zavaliangos, Evaluation of volume fraction of solid in alloys formed by semisolid processing, Journal of Materials Science, vol.35, issue.21, pp.5319-5329, 2000.
DOI : 10.1023/A:1004890711322

L. Salvo, P. Cloetens, E. Maire, S. Zabler, J. Blandin et al., X-ray micro-tomography an attractive characterisation technique in materials science. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, pp.273-286, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00475146

D. Liu, H. Atkinson, and H. Jones, Thermodynamic prediction of thixoformability in alloys based on the Al???Si???Cu and Al???Si???Cu???Mg systems, Acta Materialia, vol.53, issue.14, pp.3807-3819, 2005.
DOI : 10.1016/j.actamat.2005.04.028

W. Püttgen, W. Bleck, G. Hirt, and H. Shimahara, Thixoforming of Steels ??? A Status Report, Advanced Engineering Materials, vol.134, issue.5, pp.231-245, 2007.
DOI : 10.1002/adem.200700006

W. Püttgen and W. Bleck, DTA-Measurements to Determine the Thixoformability of Steels, steel research international, vol.8, issue.1, pp.531-536, 2004.
DOI : 10.1002/srin.200405807

P. Kumar, C. Martin, and S. Brown, Shear rate thickening flow behavior of semisolid slurries, Metallurgical Transactions A, vol.76, issue.5, pp.1107-1116, 1993.
DOI : 10.1016/0022-0248(86)90021-7

Y. Yang and C. Tsao, Viscosity and structure variations of Al?Si alloy in the semi-solid state, Journal of Materials Science, vol.32, issue.8, pp.2087-2092, 1997.
DOI : 10.1023/A:1018522805543

D. Smith, J. Eady, L. Hogan, and D. Irwin, Crystallization of a faceted primary phase in a stirred slurry, Metallurgical Transactions A, vol.28, issue.2, pp.575-584, 1991.
DOI : 10.1007/BF00540873

Y. Ryoo and D. Kim, Evolution of microstructure during semi-solid state processing of Mg-Al-Zn-X alloys, 3rd Int Conf on semisolid processing of alloys and composites, pp.95-104

S. Ji, A. Das, and Z. Fan, Solidification behavior of the remnant liquid in the sheared semisolid slurry of Sn???15 wt.%Pb alloy, Scripta Materialia, vol.46, issue.3, pp.205-210, 2002.
DOI : 10.1016/S1359-6462(01)01221-0

A. Kliauga and M. Ferrante, The influence of deformation mode on the semi-solid state microstructure of an A356 aluminium alloy, Jornadas SAM-Conamet, pp.91-98, 2001.

S. Kleiner, O. Beffort, and P. Uggowitzer, Microstructure evolution during reheating of an extruded Mg???Al???Zn alloy into the semisolid state, Scripta Materialia, vol.51, issue.5, pp.405-410, 2004.
DOI : 10.1016/j.scriptamat.2004.05.010

J. Secondé and M. Suéry, Effect of solidification conditions on deformation behaviour of semi-solid Sn-Pb alloys, Journal of Materials Science, vol.239, issue.12, pp.3995-4006, 1984.
DOI : 10.1007/BF00980763

S. Annavarapu and R. Doherty, Inhibited coarsening of solid-liquid microstructures in spray casting at high volume fractions of solid, Acta Metallurgica et Materialia, vol.43, issue.8, pp.3207-3230, 1995.
DOI : 10.1016/0956-7151(94)00448-Q

T. Chen, Y. Hao, J. Sun, and Y. Li, Phenomenological observations on thixoformability of a zinc alloy ZA27 and the resulting microstructures, Materials Science and Engineering: A, vol.396, issue.1-2, pp.213-222, 2005.
DOI : 10.1016/j.msea.2005.01.013

T. Chen, Y. Hao, J. Sun, and Y. Li, Effects of Mg and RE additions on the semi-solid microstructure of a zinc alloy ZA27, Science and Technology of Advanced Materials, vol.11, issue.6, pp.495-502, 2003.
DOI : 10.1023/A:1018595110144

B. Amin-ahmadi and H. Aashuri, Globular Structure of M2 High Speed Steel by Thermomechanical Treatment in the Semisolid State, steel research international, vol.289, issue.5, pp.381-386, 2010.
DOI : 10.1002/srin.201000014

M. Suery, Mise en forme des alliages métalliques à l'état semi-solide, 2002.

H. Laukli, O. Lohne, S. Sannes, H. Gjestland, and L. Arnberg, Grain size distribution in a complex AM60 magesium alloy die casting, Int J Cast Metals Research, vol.6, pp.515-521, 2003.

S. Blais, W. Loue, and C. Pluchon, Structure control by electromagnetic stirring and reheating at semisolid state, Proceedings of 4th International Conference on Semi-solid Processing of Alloys and Components, pp.187-192

I. Lifshitz and V. Slyozov, The kinetics of precipitation from supersaturated solid solutions, Journal of Physics and Chemistry of Solids, vol.19, issue.1-2, pp.35-50, 1961.
DOI : 10.1016/0022-3697(61)90054-3

E. Manson-whitton, I. Stone, J. Jones, P. Grant, and B. Cantor, Isothermal grain coarsening of spray formed alloys in the semi-solid state, Acta Materialia, vol.50, issue.10, pp.2517-2535, 2002.
DOI : 10.1016/S1359-6454(02)00080-0

K. Kim and D. Yoon, Coarsening behaviour of Mo grains dispersed in liquid matrix, Acta Metallurgica, vol.31, pp.1151-1157, 1983.

W. Boettinger, P. Voorhees, R. Dobbyn, and H. Burdette, A study of the coarsening of liquid-solid mixtures using synchrotron radiation microradiography, Metallurgical Transactions A, vol.15, issue.4, pp.487-490, 1987.
DOI : 10.1007/BF02648812

W. Loue, M. Suery, and J. Querbes, Microstructure and rheology of partially remelted AlSi-alloys, Proc 2nd Int Conf on the Processing of Semi-Solid Alloys and Composites, p.266, 1992.

G. Gullo, K. Steinhoff, and P. Uggowitzer, Microstructural changes during reheating of semi-solid alloy AA 6082, 6th International Conference Semi-Solid Processing of Alloys and Composites, pp.367-372

Y. Liu, Z. Fan, and J. Patel, Thermodynamic approach to aluminium alloy design for semisolid metal In 7th S2P on Advanced Semi-Solid Processing of Alloys and Composites National Institute of Advanced Industrial Science and Technology and the Japan Society for Technology of Plasticity, pp.599-604

J. Patel, Y. Liu, G. Shao, and Z. Fan, Rheo-processing of an alloy specifically designed for semi-solid metal processing based on the Al???Mg???Si system, Materials Science and Engineering: A, vol.476, issue.1-2, pp.341-349, 2008.
DOI : 10.1016/j.msea.2007.05.046

Y. Liu, Z. Fan, M. Kiuchi, and K. Ichikawa, Magnesium alloy selections for semisolid metal processing National Institute of Advanced Industrial Science and Technology and the Japan Society for Technology of Plasticity, 7th S2P International Conference on Semi-solid Processing of Alloys and Composites, pp.587-592

W. Püttgen, W. Bleck, I. Seidl, R. Kopp, and C. Bertrand, Investigation of Thixoforged Damper Brackets made of the Steel Grades HS6-5-3 and 100Cr6, Advanced Engineering Materials, vol.72, issue.131, pp.726-735, 2005.
DOI : 10.1002/adem.200500026

B. Hallstedt, E. Baltichev, H. Shimahara, and D. Neuschutz, Semi-solid Processing of Alloys: Principles, Thermodynamic Selection Criteria, Applicability, ISIJ International, vol.46, issue.12, pp.1852-1857, 2006.
DOI : 10.2355/isijinternational.46.1852

M. Robelet, A. Rassili, and D. Fischer, Steel grades adapted to the thixoforging process: metallurgical structures and mechanical properties. Solid State Phenomena, Semi-Solid Processing of Alloys and Composites, pp.116-117712, 2006.

A. Schönbohm, R. Gasper, and D. Abel, Inductive Reheating of Steel Billets into the Semi-Solid State Based on Pyrometer Measurements. Solid State Phenomena, Semi-Solid Processing of Alloys and Composites, pp.116-117734, 2006.

M. Kiuchi, S. Sugiyama, and M. Arai, Experimental study on mushy metal forming, Journal of the Japan Society for Technology of Plasticity, vol.37, pp.1219-1224, 1996.

B. Behrens, B. Haller, and D. Fischer, Thixoforging of Steel Using Ceramic Tool Materials, steel research international, vol.93, issue.10, pp.561-568, 2004.
DOI : 10.1002/srin.200405811

B. Nohm, U. Morjan, and D. Hartmann, Thixoforming of steel, 6th Inter Conf on Semi-solid Processing of Alloys and Composites, 2000.

M. Tsuchiya, H. Ueno, and I. Takagi, Research of semi solid casting of iron, JSAE Review, vol.24, issue.2, pp.205-214, 2003.
DOI : 10.1016/S0389-4304(03)00013-4

H. Bramann, M. Fehlbier, and P. Sahm, Buhrig-polaczek A: Casting of a cold work steel alloy in semi-solid state, Journal of Materials Processing Technology, pp.1357-1364, 2004.

G. Hirt, W. Bleck, A. Buhrig-polaczek, H. Shimahara, W. Puttgen et al., Semi solid casting and forging of steel. Solid State Phenomena, pp.116-11734, 2006.

R. 1. Kazakov, A. Luong, and N. , Characterization of semisolid materials structure, Materials Characterization, vol.46, issue.2-3, pp.155-161, 2001.
DOI : 10.1016/S1044-5803(01)00118-8

H. Atkinson and A. Rassili, A review of the semi-solid processing of steel, International Journal of Material Forming, vol.54, issue.S1, pp.791-795, 2010.
DOI : 10.1007/s12289-010-0889-7

W. Püttgen and W. Bleck, DTA-Measurements to Determine the Thixoformability of Steels, steel research international, vol.8, issue.1, pp.531-536, 2004.
DOI : 10.1002/srin.200405807

R. Kopp, J. Kallweit, T. Möller, and I. Seidl, Forming and joining of commercial steel grades in the semisolid state, Journal of Materials Processing Technology, pp.130-131562, 2002.

A. Neag, V. Favier, R. Bigot, and M. Pop, Microstructure and flow behaviour during backward extrusion of semi-solid 7075 aluminium alloy, Journal of Materials Processing Technology, vol.212, issue.7, pp.1472-1480, 2012.
DOI : 10.1016/j.jmatprotec.2012.02.003

M. Orfeuil, Electric Process heating: Technologies/Equipment/Applications, p.11, 1981.

E. Becker, R. Bigot, and L. Langlois, Thermal exchange effects on steel thixoforming processes. The International Journal of Advanced Manufacturing Technology, pp.913-924, 2009.
DOI : 10.1007/s00170-009-2353-8
URL : https://hal.archives-ouvertes.fr/hal-01091012

G. Hirt, W. Bleck, A. Buhrig-polaczek, H. Shimahara, W. Puttgen et al., Semi solid casting and forging of steel. Solid State Phenomena, pp.116-11734, 2006.
DOI : 10.4028/3-908451-26-4.34
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.634.8173

G. Hirt and R. Kopp, Thixoforming -semi-solid metal processing, 2009.

G. Herman, Image Reconstruction from Projections, 1980.

J. Heulens, B. Blanpain, and N. Moelans, Analysis of the isothermal crystallization of CaSiO3 in a CaO???Al2O3???SiO2 melt through in situ observations, Journal of the European Ceramic Society, vol.31, issue.10, pp.1873-1879, 2011.
DOI : 10.1016/j.jeurceramsoc.2011.03.038

S. Wang, L. Gao, F. Huang, and X. Wang, Confocal laser scanning microscopy and its application in metallurgy, Metallurgical Analysis, vol.31, pp.40-45, 2011.

H. Atkinson and A. Rassili, A review of the semi-solid processing of steel, International Journal of Material Forming, vol.54, issue.S1, pp.791-795, 2010.
DOI : 10.1007/s12289-010-0889-7

C. Fraipont and J. Lecomte-beckers, Alloy Characterization to Adapt Steels to Thixoforming: Study of a High Chromium High Carbon Steel. Solid State Phenomena, pp.141-143523, 2008.

R. Honeycombe, H. Bhadeshia, and H. Bhadeshia, Steels: Microstructure And Properties: Butterworth-Heinemann, 2006.

M. Thixoforging, . ??, . ??????????????, and . ??, 283 1.1 Introduction of the thixoforging process???????????????????283 1.2 Final geometry of the thixoforged parts???????????????????, p.285

C. Rouff, Contribution à la caractérisation et à la modélisation du comportement d'un acier à l'état semi-solide, 2003.

E. Tzimas and A. Zavaliangos, Mechanical behavior of alloys with equiaxed microstructure in the semisolid state at high solid content, Acta Materialia, vol.47, issue.2, pp.517-528, 1999.
DOI : 10.1016/S1359-6454(98)00356-5

D. Freitas, E. , F. Junior, E. Piffer, and V. , Ferrante M: Microstructure, material flow and tensile properties of A356 alloy thixoformed parts, Materials Research, vol.7, pp.593-603, 2004.

R. Carole, Contribution à la caractérisation et à la modelisation du comportement d'un acier à l'état semi-solide application au thixoforgeage. Arts et Métiers ParisTech, Docteur de L'école nationale supérieure d'arts et métiers, 2003.

W. Püttgen, W. Bleck, G. Hirt, and H. Shimahara, Thixoforming of Steels ??? A Status Report, Advanced Engineering Materials, vol.134, issue.5, pp.231-245, 2007.
DOI : 10.1002/adem.200700006

H. Atkinson and A. Rassili, A review of the semi-solid processing of steel, International Journal of Material Forming, vol.54, issue.S1, pp.791-795, 2010.
DOI : 10.1007/s12289-010-0889-7

E. Becker, Investigations experimentales et numeriques pour l'identification des parametres clefs du procede de thixoforgeage de l'acier sur le produit mis en forme. Thesis. L'Ecole Nationale Supériure d'Arts et Métiers, Docteur de L'Ecole National Supérieure d'Arts et Métiers Thixoforming -semi-solid metal processing, 2008.
URL : https://hal.archives-ouvertes.fr/pastel-00004477