E. A. Abdallah, C. Bouvet, S. Rivallant, B. Broll, and J. Barrau, Experimental analysis of damage creation and permanent indentation on highly oriented plates, Composites Science and Technology, vol.69, issue.7-8, pp.1238-1245, 2009.
DOI : 10.1016/j.compscitech.2009.02.029

J. Aboissière, Propagation de dommages d'impact dans un matériau composite stratifié à fibres de carbone et résine époxyde, 2003.

S. Abrate, Impact on composite structures, 1998.
DOI : 10.1017/CBO9780511574504

S. Abrate, Modeling of impacts on composite structures, Composite Structures, vol.51, issue.2, pp.129-138, 2001.
DOI : 10.1016/S0263-8223(00)00138-0

M. Akta?, C. Atas, B. M. ?çten, and R. Karakuzu, An experimental investigation of the impact response of composite laminates, Composite Structures, vol.87, issue.4, pp.307-313, 2009.
DOI : 10.1016/j.compstruct.2008.02.003

G. Alfano and M. A. Crisfield, Finite element interface models for the delamination analysis of laminated composites: mechanical and computational issues, International Journal for Numerical Methods in Engineering, vol.26, issue.7, pp.1701-1736, 2001.
DOI : 10.1002/nme.93

O. Allix and P. Ladevèze, Interlaminar interface modelling for the prediction of delamination, Composite Structures, vol.22, issue.4, pp.235-242, 1992.
DOI : 10.1016/0263-8223(92)90060-P

O. Allix, P. Ladeveze, and E. Vittecoq, Modelling and identification of the mechanical behaviour of composite laminates in compression, Composites Science and Technology, vol.51, issue.1, pp.35-42, 1994.
DOI : 10.1016/0266-3538(94)90154-6

L. Ballère, Tolérance aux dommages par impacts de structures courbes composites ? Effets d'échelles, Thèse de doctorat de l'École Nationale Supérieure d'Arts et Métiers, 2008.

J. Baruchel, J. Buffière, E. Maire, P. Merle, and G. Peix, X-RAY tomography in material science, 2000.

G. Belingardi and R. Vadori, Low velocity impact tests of laminate glass-fiber-epoxy matrix composite material plates, International Journal of Impact Engineering, vol.27, issue.2, pp.213-229, 2002.
DOI : 10.1016/S0734-743X(01)00040-9

M. L. Benzeggagh and M. Kenane, Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus, Composites Science and Technology, vol.56, issue.4, pp.439-449, 1996.
DOI : 10.1016/0266-3538(96)00005-X

J. Berthe, M. Brieu, and E. Deletombe, Improved viscoelastic model for laminate composite under static and dynamic loadings, Journal of Composite Materials, en cours de publication, 2012.
DOI : 10.1177/0021998312451294
URL : https://hal.archives-ouvertes.fr/hal-00832602

J. Berthelot, Matériaux composites : comportement mécanique et analyse des structures, 1992.

F. E. Bordeu-weldt, Calcul à l'échelle méso avec interface non locale des composites stratifiés, Thèse de Doctorat de l'École nationale supérieure de Cachan, 2012.

C. Bouvet, B. Castanié, M. Bizeul, and J. Barrau, Low velocity impact modelling in laminate composite panels with discrete interface elements, International Journal of Solids and Structures, vol.46, issue.14-15, pp.2809-2821, 2009.
DOI : 10.1016/j.ijsolstr.2009.03.010

C. Bouvet, S. Rivallant, and J. Barrau, Low velocity impact modeling in composite laminates capturing permanent indentation, Composites Science and Technology, en cours de publication, 1988.

J. C. Brewer and P. A. Lagace, Quadratic Stress Criterion for Initiation of Delamination, Journal of Composite Materials, vol.8, issue.12, pp.2809-2821, 2009.
DOI : 10.1177/002199838802201205

W. J. Cantwell and J. Morton, Geometrical effects in the low velocity impact response of CFRP, Composite Structures, vol.12, issue.1, pp.39-59, 1989.
DOI : 10.1016/0263-8223(89)90043-3

W. J. Cantwell and J. Morton, The impact resistance of composite materials ??? a review, Composites, vol.22, issue.5, pp.347-360, 1991.
DOI : 10.1016/0010-4361(91)90549-V

L. A. Carlsson, J. W. Gillepsie, and R. B. Pipes, On the Analysis and Design of the End Notched Flexure (ENF) Specimen for Mode II Testing, Journal of Composite Materials, vol.27, issue.679, pp.594-604, 1986.
DOI : 10.1177/002199838602000606

N. Carrère, E. Martin, D. Leguillon, and C. Huchette, Amorçage de la décohésion interfaciale : comparaison d'un critère mixte et d'un modèle de zone cohésive, Comptes rendus des 14 èmes Journées Nationales sur les Composites, 2005.

J. Chaboche, F. Feyel, and Y. Monerie, Interface debonding models: a viscous regularization with a limited rate dependency, International Journal of Solids and Structures, vol.38, issue.18, pp.3127-3160, 2001.
DOI : 10.1016/S0020-7683(00)00053-6

F. Chang and K. Chang, A Progressive Damage Model for Laminated Composites Containing Stress Concentrations, Journal of Composite Materials, vol.21, issue.9, pp.834-855, 1987.
DOI : 10.1177/002199838702100904

F. Chang, H. Y. Choi, and S. Jeng, Study on impact damage in laminated composites, Mechanics of Materials, vol.10, issue.1-2, pp.83-95, 1990.
DOI : 10.1016/0167-6636(90)90019-C

T. Chantrait, Méthodes multiéchelles en espace et en temps pour la tolérance aux dommages dans les structures composites, Résumés des 9èmes Journées des Doctorants de la Branche Matériaux et Structures de l'ONERA, pp.26-27, 2012.

J. Charrier, N. Carrère, F. Laurin, T. Bretheau, E. Goncalves-novo et al., Proposition of 3D progressive failure approach and validation on test cases, 14 th European Conference on Composite Materials, 2010.

J. Charrier, N. Carrère, F. Laurin, E. Goncalves-novo, and S. Mahdi, Proposition d'une méthode d'analyse dédiée aux structures composites soumises à des sollicitations hors-plan, Comptes rendus des 17 èmes Journées Nationales sur les Composites, 2011.

H. Y. Choi and F. Chang, A Model for Predicting Damage in Graphite/Epoxy Laminated Composites Resulting from Low-Velocity Point Impact, Journal of Composite Materials, vol.26, issue.14, pp.2134-2169, 1992.
DOI : 10.1177/002199839202601408

G. A. Davies and X. Zhang, Impact damage prediction in carbon composite structures, International Journal of Impact Engineering, vol.16, issue.1, pp.149-170, 1995.
DOI : 10.1016/0734-743X(94)00039-Y

G. A. Davies and R. Olsson, Impact on composite structures, The Aeronautical Journal, vol.108, issue.1089, pp.541-563, 2004.
DOI : 10.1017/S0001924000000385

M. V. Donadon, L. Iannucci, B. G. Falzon, J. M. Hodgkinson, and S. F. De-almeida, A progressive failure model for composite laminates subjected to low velocity impact damage, Computers & Structures, vol.86, issue.11-12, pp.1232-1252, 2008.
DOI : 10.1016/j.compstruc.2007.11.004

M. Freitas, A. Silva, and L. Reis, Numerical evaluation of failure mechanisms on composite specimens subjected to impact loading, Composites Part B: Engineering, vol.31, issue.3, pp.199-207, 2000.
DOI : 10.1016/S1359-8368(00)00003-2

D. Moura, M. F. Gonçalves, and J. P. , Modelling the interaction between matrix cracking and delamination in carbon???epoxy laminates under low velocity impact, Composites Science and Technology, vol.64, issue.7-8, pp.1021-1027, 2004.
DOI : 10.1016/j.compscitech.2003.08.008

D. S. Dugdale, D. J. Elder, R. S. Thomson, M. Q. Nguyen, and M. L. Scott, Yielding of steel sheets containing slits, Journal of the Mechanics and Physics of Solids, vol.8, issue.2, pp.100-104, 1960.
DOI : 10.1016/0022-5096(60)90013-2

A. Faggiani and B. G. Falzon, Predicting low-velocity impact damage on a stiffened composite panel, Composites Part A: Applied Science and Manufacturing, vol.41, issue.6, pp.7376-749, 2010.
DOI : 10.1016/j.compositesa.2010.02.005

P. Feraboli, Modified SDOF Models for Improved Representation of the Impact Response of Composite Plates, Journal of Composite Materials, vol.40, issue.24, pp.2235-2255, 2006.
DOI : 10.1177/0021998306062318

E. V. González, P. Maimí, P. P. Camanho, C. S. Lopes, and N. Blanco, Effects of ply clustering in laminated composite plates under low-velocity impact loading, Composites Science and Technology, vol.71, issue.6, pp.805-817, 2011.
DOI : 10.1016/j.compscitech.2010.12.018

E. V. González, P. Maimí, P. P. Camanho, A. Turon, and J. A. Mayugo, Simulation of drop-weight impact and compression after impact tests on composite laminates, Composite Structures, vol.94, issue.11, pp.3364-3378, 2012.
DOI : 10.1016/j.compstruct.2012.05.015

L. Gornet and H. Ijaz, High Cycle Fatigue Damage Model for Delamination Crack Growth in CF/Epoxy Composite Laminates, International Journal of Damage Mechanics, vol.9, issue.5, pp.783-807, 2011.
DOI : 10.1007/BF00017790
URL : https://hal.archives-ouvertes.fr/hal-01443169

A. A. Griffith, The Phenomena of Rupture and Flow in Solids, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.221, issue.582-593, pp.163-198, 1921.
DOI : 10.1098/rsta.1921.0006

L. Guillaumat, Reliability of composite structures ??? impact loading, Computers & Structures, vol.76, issue.1-3, pp.163-172, 2000.
DOI : 10.1016/S0045-7949(99)00166-2

S. Guinard, O. Allix, . Guédra-degeorgesd, and A. Vinet, A 3D damage analysis of low-velocity impacts on laminated composites, Composites Science and Technology, vol.62, issue.4, pp.585-589, 2002.
DOI : 10.1016/S0266-3538(01)00153-1

Z. Hashin and A. Rotem, A Fatigue Failure Criterion for Fiber Reinforced Materials, Journal of Composite Materials, vol.7, issue.4, pp.448-464, 1973.
DOI : 10.1177/002199837300700404

Z. Hashin, Failure Criteria for Unidirectional Fiber Composites, Journal of Applied Mechanics, vol.47, issue.2, pp.329-334, 1980.
DOI : 10.1115/1.3153664

M. Hautier, Analyse des réparations des matériaux composites : mise en oeuvre d'un procédé par infiltration et étude du comportement mécanique, Thèse de doctorat de l'université de Toulouse réalisée à l'Onera, 2010.

I. Herszberg and T. Weller, Impact damage resistance of buckled carbon/epoxy panels, Composite Structures, vol.73, issue.2, pp.130-137, 2006.
DOI : 10.1016/j.compstruct.2005.11.049

H. M. Hilber, T. J. Hugues, and R. L. Taylor, Improved numerical dissipation for time integration algorithms in structural dynamics, Earthquake Engineering & Structural Dynamics, vol.7, issue.3, pp.283-292, 1976.
DOI : 10.1002/eqe.4290050306

J. P. Hou, N. Petrinic, C. Ruiz, and S. R. Hallett, Prediction of impact damage in composite plates, Composites Science and Technology, vol.60, issue.2, pp.273-281, 2000.
DOI : 10.1016/S0266-3538(99)00126-8

J. P. Hou, P. Petrinic, and C. Ruiz, A delamination criterion for laminated composites under low-velocity impact, Composites Science and Technology, vol.61, issue.14, pp.2069-2074, 2001.
DOI : 10.1016/S0266-3538(01)00128-2

C. Huchette, Sur la complémentarité des approches expérimentales et numériques pour la modélisation des mécanismes d'endommagement des composites stratifiés, Thèse de doctorat de l'université Paris 6 réalisée à l'Onera, 2005.

T. J. Hugues, The finite element method : linear static and dynamic finite element analysis, 1987.

L. Iannucci, Progressive failure modelling of woven carbon composite under impact, International Journal of Impact Engineering, vol.32, issue.6, pp.1013-1043, 2006.
DOI : 10.1016/j.ijimpeng.2004.08.006

B. M. Icten, A. Cesim, M. Aktas, and R. Karakuzu, Low temperature effect on impact response of quasi-isotropic glass/epoxy laminated plates, Composite Structures, vol.91, issue.3, pp.318-323, 2009.
DOI : 10.1016/j.compstruct.2009.05.010

H. Kaczmarek, Impact basse-vitesse et indentation statique, pp.7-9, 1994.

J. Kim, Identification de cartes d'endommagement de plaques composites impactées par la méthode des champs virtuels, Thèse présentée à l'École Nationale Supérieure des Arts et Métiers, 2008.

R. Krueger, J. G. Ratcliffe, and P. J. Minguet, Panel stiffener debonding analysis using a shell/3D modeling technique, Composites Science and Technology, vol.69, issue.14, pp.2352-2362, 2009.
DOI : 10.1016/j.compscitech.2008.12.015

M. D. Kulkarni, R. Goel, and N. K. Naik, Effect of back pressure on impact and compression-after-impact characteristics of composites, Composite Structures, vol.93, issue.2, pp.944-951, 2011.
DOI : 10.1016/j.compstruct.2010.06.027

P. Ladevèze, O. Allix, L. Gornet, D. Lévêque, and L. Perret, A computational damage mechanics approach for laminates: Identification and comparison with experimental results, Damage Mechanics in Engineering Materials, vol.46, pp.481-500, 1998.
DOI : 10.1016/S0922-5382(98)80059-7

L. Lammerant and I. Verpoest, Modelling of the interaction between matrix cracks and delaminations during impact of composite plates, Composites Science and Technology, vol.56, issue.10, pp.1171-1178, 1996.
DOI : 10.1016/S0266-3538(96)00071-1

F. Laurin, Approche multiéchelle des mécansimes de ruine progressive des matériaux stratifiés et analyse de la tenue de structures composites, Thèse de doctorat de l'Université de Franche- Comté réalisée à l'Onera, 2005.

F. Laurin, N. Carrère, and J. Maire, A multiscale progressive failure approach for composite laminates based on thermodynamical viscoelastic and damage models, Composites Part A: Applied Science and Manufacturing, vol.38, issue.1, pp.198-209, 2007.
DOI : 10.1016/j.compositesa.2006.01.018

F. Laurin, N. Carrère, J. Maire, and S. Mahdi, Validation sur différents cas tests industriels d'une méthode simplifiée d'analyse de la tenue de structures perforées, Comptes-rendus des 16 èmes Journées Nationales sur les Composites, pp.10-12, 2009.

D. Leguillon, Strength or toughness? A criterion for crack onset at a notch, European Journal of Mechanics - A/Solids, vol.21, issue.1, pp.61-72, 2002.
DOI : 10.1016/S0997-7538(01)01184-6

D. Lévêque, Étude d'une procédure simplifiée d'évaluation de la résistance en compression après impact de composites carbone/résine, 2001.

J. Léon-dufour-]-léon-dufour, Composite structure certification and stress dossier, Cours ISAE, 2008.

F. Leroy, Rupture des composites unidirectionnels à fibres de carbone et matrice thermodurcissables : approche micro-macro

D. Lévêque, A. Mavel, C. Petipas, J. Maire, and A. Schieffer, Prévision de la durée de vie et performances résiduelles des composites carbone / résine. Rapport technique Onera n° RT 66, pp.12-20, 2000.

D. Liu and L. E. Malvern, Matrix Cracking in Impacted Glass/Epoxy Plates, Journal of Composite Materials, vol.15, issue.7, pp.594-609, 1987.
DOI : 10.1177/002199838702100701

D. Liu, Impact-Induced Delamination???A View of Bending Stiffness Mismatching, Journal of Composite Materials, vol.21, issue.5, pp.674-692, 1988.
DOI : 10.1177/002199838802200706

S. Liu, Z. Kutlu, and F. Et-chang, Matrix cracking and delamination in laminated composite beams subjected to a transverse concentrated line load, Journal of Composite Materials, vol.27, pp.557-584, 1993.

K. S. Liu and S. W. Tsai, A PROGRESSIVE QUADRATIC FAILURE CRITERION FOR A LAMINATE, Composites Science and Technology, vol.58, issue.7, pp.1023-132, 1998.
DOI : 10.1016/S0266-3538(96)00141-8

D. Liu, B. B. Raju, and X. Dang, SIZE EFFECTS ON IMPACT RESPONSE OF COMPOSITE LAMINATES, International Journal of Impact Engineering, vol.21, issue.10, pp.837-854, 1998.
DOI : 10.1016/S0734-743X(98)00036-0

C. S. Lopes, O. Seresta, Y. Coquet, Z. Gürdal, P. P. Camanho et al., Low-velocity impact damage on dispersed stacking sequence laminates. Part I: Experiments, Composites Science and Technology, vol.69, issue.7-8, pp.926-936, 2009.
DOI : 10.1016/j.compscitech.2009.02.009

C. S. Lopes, P. P. Camanho, Z. Gürdal, P. Maimí, and E. V. González, Low-velocity impact damage on dispersed stacking sequence laminates. Part II: Numerical simulations, Composites Science and Technology, vol.69, issue.7-8, pp.937-947, 2009.
DOI : 10.1016/j.compscitech.2009.02.015

J. Maire, Études théorique et expérimentale du comportement de matériaux composites en contraintes planes, Thèse de doctorat de l'Université de Franche-Comté, 1992.

J. Maire and J. Chaboche, A new formulation of continuum damage mechanics (CDM) for composite materials, Aerospace Science and Technology, vol.1, issue.4, pp.247-257, 1997.
DOI : 10.1016/S1270-9638(97)90035-3

S. Marguet, P. Rozycki, and L. Gornet, A Rate Dependent Constitutive Model for Carbon-Fiber Reinforced Plastic Woven Fabrics, Mechanics of Advanced Materials and Structures, vol.14, issue.8, pp.619-631, 2007.
DOI : 10.1016/j.compstruct.2004.07.021
URL : https://hal.archives-ouvertes.fr/hal-01004935

S. Marguet, Contribution à la modélisation du comportement mécanique des structures sandwich soumises à l'impact, Thèse de Doctorat de l'École Centrale de Nantes et de l'Université de Nantes, 2007.

G. Minak and D. Ghelli, Influence of diameter and boundary conditions on low velocity impact response of CFRP circular laminated plates, Composites Part B: Engineering, vol.39, issue.6, pp.962-972, 2008.
DOI : 10.1016/j.compositesb.2008.01.001

T. Mitrevski, I. H. Marshall, R. Thomson, R. Jones, and B. Whittingham, The effect of impactor shape on the impact response of composite laminates, Composite Structures, vol.67, issue.2, pp.139-148, 2005.
DOI : 10.1016/j.compstruct.2004.09.007

T. Mitrevski, I. H. Marshall, R. Thomson, and R. Jones, Low-velocity impacts on preloaded GFRP specimens with various impactor shapes, Composite Structures, vol.76, issue.3, pp.209-217, 2006.
DOI : 10.1016/j.compstruct.2006.06.033

R. Olsson, M. V. Donadon, and B. G. Falzon, Delamination threshold load for dynamic impact on plates, International Journal of Solids and Structures, vol.43, issue.10, pp.3124-3141, 2006.
DOI : 10.1016/j.ijsolstr.2005.05.005

A. Puck and H. Schurmann, FAILURE ANALYSIS OF FRP LAMINATES BY MEANS OF PHYSICALLY BASED PHENOMENOLOGICAL MODELS, Composites Science and Technology, vol.58, issue.7, pp.1045-1067, 1998.
DOI : 10.1016/S0266-3538(96)00140-6

L. Raimondo, L. Iannucci, P. Robinson, and P. T. Curtis, A progressive failure model for mesh-size-independent FE analysis of composite laminates subject to low-velocity impact damage, Composites Science and Technology, vol.72, issue.5, pp.624-632, 2012.
DOI : 10.1016/j.compscitech.2012.01.007

. Rémy-petipas, Rémy-Petipas C., Analyse et prévision du comportement à long terme des composites fibres de carbone / matrice organique, Thèse de Doctorat de l'Université de Franche-Comté réalisée à l'Onera, 2000.

M. Renault, Compression après impact d'une plaque stratifiée : étude expérimentale et modélisation éléments finis associée, Thèse de doctorat de l'École Centrale de Nantes, 1994.

M. O. Richardson and M. J. Wisheart, Review of low-velocity impact properties of composite materials, Composites Part A: Applied Science and Manufacturing, vol.27, issue.12, pp.1123-1131, 1996.
DOI : 10.1016/1359-835X(96)00074-7

P. Robinson and G. A. Et-davies, Impactor mass and specimen geometry effects in low velocity impact of laminated composites, International Journal of Impact Engineering, vol.12, issue.2, pp.189-207, 1992.
DOI : 10.1016/0734-743X(92)90408-L

J. Rouchon, Fatigue and damage tolerance aspects for composite aircraft structures, 1995.

. Sánchez-sáez, S. Sánchez-sáez, E. Barbero, and C. Navarro, Analysis of the dynamic flexural behaviour of composite beams at low temperature, Composites Science and Technology, vol.67, issue.11-12, pp.2616-2632, 2007.
DOI : 10.1016/j.compscitech.2006.12.002

F. Shen, K. H. Lee, and T. E. Tay, Modeling delamination growth in laminated composites, Composites Science and Technology, vol.61, issue.9, pp.1239-1251, 2001.
DOI : 10.1016/S0266-3538(01)00023-9

K. N. Shivakumar, W. Elber, and W. Illg, Prediction of low-velocity impact damage in thin circular laminates, AIAA Journal, vol.23, issue.3, pp.442-449, 1985.
DOI : 10.2514/3.8933

P. O. Sjöblom, J. T. Hartness, and T. M. Cordell, On Low-Velocity Impact Testing of Composite Materials, Journal of Composite Materials, vol.563, issue.10, pp.30-52, 1988.
DOI : 10.1177/002199838802200103

K. Srinivasan, W. C. Jackson, B. T. Smith, and J. A. Hinkley, Characterization of Damage Modes in Impacted Thermoset and Thermoplastic Composites, Journal of Reinforced Plastics and Composites, vol.11, issue.10, pp.1111-1126, 1992.
DOI : 10.1177/073168449201101004

W. Staszewski, C. Boller, and G. Tomlinson, Health monitoring of aerospace structures: smart sensor technologies and signal processing, 2004.
DOI : 10.1002/0470092866

C. T. Sun and C. J. Jih, Quasi-static modeling of delamination crack propagation in laminates subjected to low-velocity impact, Composites Science and Technology, vol.54, issue.2, pp.185-191, 1995.
DOI : 10.1016/0266-3538(95)00044-5

L. S. Sutherland, G. Soares, and C. , The use of quasi-static testing to obtain the low-velocity impact damage resistance of marine GRP laminates, Composites Part B: Engineering, vol.43, issue.3, pp.1459-1467, 2012.
DOI : 10.1016/j.compositesb.2012.01.002

E. Trousset, Prévision de l'endommagement induit par un impact sur structures composites, 2009.

A. Turon, C. G. Dávila, P. P. Camanho, and J. Costa, An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models, Engineering Fracture Mechanics, vol.74, issue.10, pp.1665-1682, 2007.
DOI : 10.1016/j.engfracmech.2006.08.025

T. Vandellos, M. Hautier, N. Carrère, and C. Huchette, Development of a new fracture test to identify the critical energy release rate: The Tensile Flexure test on Notched Specimen, Engineering Fracture Mechanics, vol.96, pp.641-655, 2012.
DOI : 10.1016/j.engfracmech.2012.09.026
URL : https://hal.archives-ouvertes.fr/hal-00935075

B. Whittingham, I. H. Marshall, T. Mitrevski, and R. Jones, The response of composite structures with pre-stress subject to low velocity impact damage, Composite Structures, vol.66, issue.1-4, pp.685-698, 2004.
DOI : 10.1016/j.compstruct.2004.06.015

X. P. Xu and A. Needleman, Void nucleation by inclusion debonding in a crystal matrix, Modelling and Simulation in Materials Science and Engineering, vol.1, issue.2, pp.111-132, 1993.
DOI : 10.1088/0965-0393/1/2/001

N. O. Yokoyama, M. V. Donadon, and S. F. De-almeida, A numerical study on the impact resistance of composite shells using an energy based failure model, Composite Structures, vol.93, issue.1, pp.142-152, 2010.
DOI : 10.1016/j.compstruct.2010.06.006

T. Yokozeki, T. Ogasawara, and T. Ishikawa, Nonlinear behavior and compressive strength of unidirectional and multidirectional carbon fiber composite laminates, Composites Part A: Applied Science and Manufacturing, vol.37, issue.11, pp.2069-2079, 2006.
DOI : 10.1016/j.compositesa.2005.12.004

Y. Zhang, P. Zhu, and X. Lai, Finite element analysis of low-velocity impact damage in composite laminated plates, Materials & Design, vol.27, issue.6, pp.513-519, 2006.
DOI : 10.1016/j.matdes.2004.11.014