B. La-figure, 9 compare, dans le cas non bruité, l'estimation de la résistance (figure B.9(a)), traduite en estimation de la température des enroulements (figures B.9(b) et B.9(c)), quand seule la résistance est estimée

B. La-figure, 10 compare, dans le cas bruité, l'estimation du flux (figure B

B. La-figure, 11 compare, dans le cas bruité, l'estimation du flux (figure B

V. Andrieu and L. Praly, On the Existence of a Kazantzis--Kravaris/Luenberger Observer, SIAM Journal on Control and Optimization, vol.45, issue.2, pp.432-456, 2006.
DOI : 10.1137/040617066
URL : https://hal.archives-ouvertes.fr/hal-00529943

R. B. Ash and M. F. Gardner, Topics in stochastic processes, 1975.

T. Batzel and K. Lee, Electric propulsion with the sensorless permanent magnet synchronous motor : model and approach. Energy Conversion, IEEE Transactions on, vol.20, issue.4, pp.818-825, 2005.

P. Billingsley, Probability and measure. Third Edition, 1995.

P. Borne, G. Dauphin-tanguy, J. Richard, and F. , Rotella, and I. Zambettakis. Modélisation et identification des processus. edition technip, 1992.

L. Chédot, Contribution à l'étude des machines synchrones à aimants permanents internes à large espace de fonctionnement. Application à l'alterno-démarreur, 2004.

J. Chiasson, Modeling and High-Performance Control of Electric Machines, 2005.
DOI : 10.1002/0471722359

S. Constantinides, Understanding and using reversible temperature coefficients. Arnold Magnetic Technologies, 2009.

M. Coste, Elimination, résultant. discriminant Agrégation mathématique de l'université de Rennes

C. D. Andrea and A. Dickenstein, Explicit formulas for the multivariate resultant, Journal of Pure and Applied Algebra, vol.164, issue.1-2, pp.59-86, 2001.
DOI : 10.1016/S0022-4049(00)00145-6

G. Demetriades, H. De-la-parra, E. Andersson, and H. Olsson, A Real-Time Thermal Model of a Permanent-Magnet Synchronous Motor, IEEE Transactions on Power Electronics, vol.25, issue.2, pp.463-474, 2010.
DOI : 10.1109/TPEL.2009.2027905

W. Dib, R. Ortega, and J. Malaizé, Sensorless control of permanent-magnet synchronous motor in automotive applications: Estimation of the angular position, IECON 2011, 37th Annual Conference of the IEEE Industrial Electronics Society
DOI : 10.1109/IECON.2011.6119400

J. L. Doob, Stochastic processes, 1953.

A. Magri, F. Giri, G. Besançon, A. Fadili, L. Dugard et al., Sensorless adaptive output feedback control of wind energy systems with PMS generators, Control Engineering Practice, vol.21, issue.4, 2012.
DOI : 10.1016/j.conengprac.2012.11.005
URL : https://hal.archives-ouvertes.fr/hal-00764404

J. Gauthier and I. Kupka, Deterministic observation theory and applications
DOI : 10.1017/CBO9780511546648

F. Genduso, R. Miceli, C. Rando, and G. Galluzzo, Back emf sensorless-control algorithm for high-dynamic performance pmsm. Industrial Electronics, IEEE Transactions on, vol.57, issue.6, pp.2092-2100, 2010.

D. Giancoli, 27. Current and Resistance". In Physics for scientists & engineers with modern physics, 2009.

M. Hamida, J. De-leon, A. Glumineau, and R. Boisliveau, An Adaptive Interconnected Observer for Sensorless Control of PM Synchronous Motors With Online Parameter Identification, IEEE Transactions on Industrial Electronics, vol.60, issue.2, pp.739-748, 2013.
DOI : 10.1109/TIE.2012.2206355
URL : https://hal.archives-ouvertes.fr/hal-00722610

M. Hinkkanen, T. Tuovinen, L. Harnefors, and J. Luomi, A Combined Position and Stator-Resistance Observer for Salient PMSM Drives: Design and Stability Analysis, IEEE Transactions on Power Electronics, vol.27, issue.2, pp.1-1, 2012.
DOI : 10.1109/TPEL.2011.2118232

S. Ichikawa, M. Tomita, S. Doki, and S. Okuma, Sensorless control of permanentmagnet synchronous motors using online parameter identification based on system identification theory. Industrial Electronics, IEEE Transactions on, vol.53, issue.2, pp.363-372, 2006.

A. Jebai, F. Malrait, P. Martin, and P. Rouchon, Estimation of saturation of Permanent-Magnet Synchronous Motors through an energy-based model, 2011 IEEE International Electric Machines & Drives Conference (IEMDC), pp.1316-1321, 2011.
DOI : 10.1109/IEMDC.2011.5994795
URL : https://hal.archives-ouvertes.fr/hal-00638457

N. Kazantzis and C. Kravaris, Nonlinear observer design using Lyapunov???s auxiliary theorem, Systems & Control Letters, vol.34, issue.5, pp.241-247, 1998.
DOI : 10.1016/S0167-6911(98)00017-6

G. Kreisselmeier, Adaptive observers with exponential rate of convergence. Automatic Control, IEEE Transactions on, vol.22, issue.1, pp.2-8, 1977.

S. Lee, T. G. Habetler, R. G. Harley, and D. J. Gritter, An evaluation of modelbased stator resistance estimation for induction motor stator winding temperature monitoring. Energy Conversion, IEEE Transactions on, vol.17, issue.1, pp.7-15, 2002.

D. R. Lide, CRC Handbook of Chemistry and Physics : A Ready- Reference Book of Chemical and Physical Data, 2004.

Y. Linnik, Méthode des moindres carrés. Dunod, 1963.

K. Liu, Q. Zhang, J. Chen, Q. Zhu, J. Zhang et al., Online Multi-parameter Estimation of Non-salient Pole PM Synchronous Machines with Temperature Variation Tracking. Industrial Electronics, IEEE Transactions on, issue.99, pp.581776-1788, 2010.

L. Liu and D. Cartes, Synchronisation based adaptive parameter identification for permanent magnet synchronous motors, IET Control Theory & Applications, vol.1, issue.4, pp.1015-1022, 2007.
DOI : 10.1049/iet-cta:20060065

D. G. Luenberger, Observing the state of a linear system. Military Electronics, IEEE Transactions on, vol.8, issue.2, pp.74-80, 1964.

J. Malaize, W. Dib, and I. N. Energy, A Sensorless-Based Control Scheme to Enhance the Accuracy of Position Encoders Used in Permanent Magnet Synchronous Motors for Automotive Applications, SAE Technical Paper Series, pp.7-8, 2005.
DOI : 10.4271/2012-01-0343

J. Malaize, W. Dib, and S. Toru, Adaptive torque control of Permanent Magnet Synchronous Motors in automotive applications, 2010 IEEE Vehicle Power and Propulsion Conference, 2010.
DOI : 10.1109/VPPC.2010.5729013

J. Malaizé, L. Praly, and N. Henwood, Globally convergent nonlinear observer for the sensorless control of surface-mount Permanent Magnet Synchronous machines, 2012 IEEE 51st IEEE Conference on Decision and Control (CDC)
DOI : 10.1109/CDC.2012.6426415

F. Malrait, Problèmes d'identification et d'observabilité du moteur à induction pour la variation de vitesse industrielle'sans capteur, 2001.

P. Milanfar and J. Lang, Monitoring the thermal condition of permanent-magnet synchronous motors. Aerospace and Electronic Systems, IEEE Transactions on, vol.32, issue.4, pp.1421-1429, 1996.

S. Moreau, R. Kahoul, and J. Louis, Parameters estimation of permanent magnet synchronous machine without adding extra-signal as input excitation, 2004 IEEE International Symposium on Industrial Electronics, pp.371-376, 2004.
DOI : 10.1109/ISIE.2004.1571836

B. Nahid-mobarakeh, F. Meibody-tabar, and F. Sargos, Mechanical Sensorless Control of PMSM With Online Estimation of Stator Resistance, IEEE Transactions on Industry Applications, vol.40, issue.2, pp.457-471, 2004.
DOI : 10.1109/TIA.2004.824490

K. Narendra and A. Annaswamy, Stable adaptive systems, Autom, vol.5, issue.2, pp.183-201, 1989.

S. Omatu, A. Kikuchi, and T. Soeda, The optimal smoothing estimators based on the Wiener-Hopf theory, International Journal of Systems Science, vol.22, issue.11, pp.1203-1217, 1979.
DOI : 10.1080/00207727908941655

R. Ortega, L. Praly, A. Astolfi, J. Lee, and K. Nam, Estimation of Rotor Position and Speed of Permanent Magnet Synchronous Motors With Guaranteed Stability, IEEE Transactions on Control Systems Technology, vol.19, issue.3, pp.601-614, 2011.
DOI : 10.1109/TCST.2010.2047396
URL : https://hal.archives-ouvertes.fr/hal-00555689

N. Petit and P. Rouchon, Automatique -Dynamique et contrôle des systèmes, MINES ParisTech -CAS -Centre Automatique et Systèmes, 2010.

F. Poulain, L. Praly, and R. Ortega, An observer for permanent magnet synchronous motors with currents and voltages as only measurements, 2008 47th IEEE Conference on Decision and Control, pp.5390-5395, 2008.
DOI : 10.1109/CDC.2008.4738868
URL : https://hal.archives-ouvertes.fr/hal-00576042

M. Preindl and E. Schaltz, Sensorless Model Predictive Direct Current Control Using Novel Second-Order PLL Observer for PMSM Drive Systems, IEEE Transactions on Industrial Electronics, vol.58, issue.9, pp.4087-4095, 2011.
DOI : 10.1109/TIE.2010.2100331

S. Richter and R. Decarlo, Continuation methods : Theory and applications. Automatic Control, IEEE Transactions on, vol.28, issue.6, pp.660-665, 1983.

A. Shoshitaishvili, Singularities for projections of integral manifolds with applications to control and observation problems, Advances in Soviet Mathematics, vol.1, pp.295-333, 1990.

A. Specht and J. Böcker, Observer for the rotor temperature of IPMSM, Proceedings of 14th International Power Electronics and Motion Control Conference EPE-PEMC 2010, pp.4-12, 2010.
DOI : 10.1109/EPEPEMC.2010.5606818

K. S. Tsakalis and P. A. Ioannou, Linear time-varying systems : control and adaptation, 1993.

N. Urasaki, T. Senjyu, and K. Uezato, Investigation of influences of various losses on electromagnetic torque for surface-mounted permanent magnet synchronous motors, IEEE Transactions on Power Electronics, vol.18, issue.1, pp.131-139, 2003.
DOI : 10.1109/TPEL.2002.807084

S. Wilson, P. Stewart, and B. Taylor, Methods of resistance estimation in permanent magnet synchronous motors for real-time thermal management. Energy Conversion, IEEE Transactions on, vol.25, issue.3, pp.698-707, 2010.

X. Xiao, C. Chen, and M. Zhang, Dynamic Permanent Magnet Flux Estimation of Permanent Magnet Synchronous Machines, IEEE Transactions on Applied Superconductivity, vol.20, issue.3, pp.1085-1088, 2010.
DOI : 10.1109/TASC.2010.2041435

Z. Zhang and J. Feng, Sensorless control of salient pmsm with ekf of speed and rotor position, Electrical Machines and Systems ICEMS 2008. International Conference on, pp.1625-1628, 2008.

Z. Zhu, X. Zhu, P. Sun, and D. Howe, Estimation of Winding Resistance and PM Flux-Linkage in Brushless AC Machines by Reduced-Order Extended Kalman Filter, 2007 IEEE International Conference on Networking, Sensing and Control, pp.740-745, 2007.
DOI : 10.1109/ICNSC.2007.372872