P. Déformation-totale-du and P. Des-composites, fluage en atmosphère s` echè a 20 ? C (10%hr), p.120

P. Module-d-'´-elasticité-du, fluagè a 10 MPa en immersion dans l'eaù a 20, p.126

P. Gonflement-du and P. Des-composites, lin après 1225h d'immersion dans l'eau en fonction de la direction de mesure, p.100

M. A. Abdel-rahman, Y. Tashiro, and K. Sonomoto, Lactic acid production from lignocellulose-derived sugars using lactic acid bacteria: Overview and limits, Journal of Biotechnology, vol.156, issue.4, pp.286-301, 2010.
DOI : 10.1016/j.jbiotec.2011.06.017

B. A. Acha, N. E. Marcovich, and J. Karger-kocsis, Biodegradable jute cloth reinforced thermoplastic copolyester composites: fracture and failure behaviour, Plastics, Rubber and Composites, vol.1, issue.5, pp.73-82, 1957.
DOI : 10.1179/146580101322913257

B. A. Acha, M. M. Reboredo, and N. E. Marcovich, Creep and dynamic mechanical behavior of PP???jute composites: Effect of the interfacial adhesion, Composites Part A: Applied Science and Manufacturing, vol.38, issue.6, pp.1507-1516, 1957.
DOI : 10.1016/j.compositesa.2007.01.003

R. D. Adams, The dynamic properties of fibre-reinforced polymers exposed to hot, wet conditions, Composites Science and Technology, vol.56, issue.8, pp.977-997, 1996.
DOI : 10.1016/0266-3538(96)00065-6

M. J. Adamson, Thermal expansion and swelling of cured epoxy resin used in graphite/epoxy composite materials, Journal of Materials Science, vol.98, issue.2, pp.1736-1745, 1980.
DOI : 10.1007/BF00550593

M. Akay, Introduction to Polymer Science and Technology, Bookboon, p.41, 2012.

S. Alix, L. Lebrun, C. Morvan, and S. Marais, Study of water behaviour of chemically treated flax fibres-based composites: A way to approach the hydric interface, Composites Science and Technology, vol.71, issue.6, pp.893-899, 2011.
DOI : 10.1016/j.compscitech.2011.02.004
URL : https://hal.archives-ouvertes.fr/hal-00736293

P. Allen, C. Lai, and D. Williams, Physical ageing of reaction-cast acrylate and methacrylate polymers and other dimensional instabilities manifest in thermomechanical analysis, European Polymer Journal, vol.29, issue.10, pp.1293-1303, 0144.
DOI : 10.1016/0014-3057(93)90184-H

K. M. Almgren, E. K. Gamstedt, F. Berthold, and M. Lindström, Moisture uptake and hygroexpansion of wood fiber composite materials with polylactide and polypropylene matrix materials, Polymer Composites, vol.36, issue.277, pp.1809-1816, 2009.
DOI : 10.1002/pc.20753

K. M. Almgren, E. K. Gamstedt, and J. Varna, Contribution of wood fiber hygroexpansion to moisture induced thickness swelling of composite plates, Polymer Composites, vol.53, issue.277, p.134, 2009.
DOI : 10.1002/pc.20858

V. A. Alvarez, A. N. Fraga, and A. Vazquez, Effects of the moisture and fiber content on the mechanical properties of biodegradable polymer-sisal fiber biocomposites, Journal of Applied Polymer Science, vol.14, issue.6, pp.4007-4016, 0138.
DOI : 10.1002/app.13561

G. R. Antonio, D. Pinelli, M. Rossi, D. Fajner, F. Magelli et al., Production of l(+) and d(???) lactic acid isomers by Lactobacillus casei subsp. casei DSM 20011 and Lactobacillus coryniformis subsp. torquens DSM 20004 in continuous fermentation, Journal of Fermentation and Bioengineering, vol.81, issue.6, pp.81548-552, 1996.
DOI : 10.1016/0922-338X(96)81478-4

Z. Azwa, B. Yousif, .. C. Manalo, and W. Karunasena, A review on the degradability of polymeric composites based on natural fibres, Materials & Design, vol.47, issue.86, pp.424-442, 1954.
DOI : 10.1016/j.matdes.2012.11.025

J. Badia and L. , Hygrothermal ageing of reprocessed polylactide, Polymer Degradation and Stability, vol.97, issue.10, pp.1881-1890, 2012.
DOI : 10.1016/j.polymdegradstab.2012.06.001

C. Baley, Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase, Composites Part A: Applied Science and Manufacturing, vol.33, issue.7, pp.939-948, 2002.
DOI : 10.1016/S1359-835X(02)00040-4

C. Baley, Fibres naturelles de renfort pour matériaux composites, Techniques De L'Ingénieur, AM, vol.13, issue.161, pp.1-12, 2004.

C. Baley, A. L. Duigou, A. Bourmaud, and P. Davies, Influence of drying on the mechanical behaviour of flax fibres and their unidirectional composites, Composites Part A: Applied Science and Manufacturing, vol.43, issue.8, pp.431226-1233, 2012.
DOI : 10.1016/j.compositesa.2012.03.005
URL : https://hal.archives-ouvertes.fr/hal-00717191

B. Bax and J. Müssig, Impact and tensile properties of PLA/Cordenka and PLA/flax composites, Composites Science and Technology, vol.68, issue.7-8, pp.1601-1607, 2008.
DOI : 10.1016/j.compscitech.2008.01.004
URL : https://hal.archives-ouvertes.fr/hal-00575241

J. Beaugrand and F. Berzin, Lignocellulosic fiber reinforced composites: Influence of compounding conditions on defibrization and mechanical properties, Journal of Applied Polymer Science, vol.38, issue.2, pp.1227-1238, 0107.
DOI : 10.1002/app.38468
URL : https://hal.archives-ouvertes.fr/hal-01267981

L. Belard, Eco-matériaux : Etat des lieux et perspectives, Forum International de la Plasturgie, p.161, 2009.

A. Bergeret, L. Ferry, and P. Ienny, Vieillissement hygrothermique des composites thermoplastiques renforcés par des fibres de verre. Partie I. Les mécanismes de vieillissement des compositespolyéthyì ene téréphtalate (PET)/verre, pp.17-31, 2008.
DOI : 10.3166/rcma.18.17-31

A. Bergeret, L. Ferry, and P. Ienny, Vieillissement hygrothermique des composites thermoplastiques renforc??s par des fibres de verre Partie II. R??le de la matrice et de l'interface fibre/matrice sur les m??canismes de vieillissement des composites, Revue des composites et des mat??riaux avanc??s, vol.18, issue.1, pp.33-49, 2008.
DOI : 10.3166/rcma.18.33-49

A. Bergeret, L. Ferry, and P. Ienny, Influence of the fibre/matrix interface on ageing mechanisms of glass fibre reinforced thermoplastic composites (PA-6,6, PET, PBT) in a hygrothermal environment, Polymer Degradation and Stability, vol.94, issue.9, pp.1315-1324, 2009.
DOI : 10.1016/j.polymdegradstab.2009.04.009

L. Berreur, B. D. Maillard, and S. Nösperger, L'industrie française des matériaux composites, Ministère de l'´ economie des finances et de l'industrie, 2002.

V. Berthé, L. Ferry, J. Benezet, and A. Bergeret, Ageing of different biodegradable polyesters blends mechanical and hygrothermal behavior, Polymer Degradation and Stability, vol.95, issue.3, pp.262-269, 2010.
DOI : 10.1016/j.polymdegradstab.2009.11.008

S. Bessadok, F. Marais, L. Gouanvé, I. Colasse, S. Zimmerlin et al., Effect of chemical treatments of Alfa (Stipa tenacissima) fibres on water-sorption properties, Composites Science and Technology, vol.67, issue.3-4, pp.3-4685, 2007.
DOI : 10.1016/j.compscitech.2006.04.013
URL : https://hal.archives-ouvertes.fr/hal-00372590

H. Bewa, Usage des résines biosourcées : quels développements en France, dans l'Union Européenne et dans le monde, 2011.

A. Bismarck, I. Aranberri-askargorta, J. Springer, T. Lampke, B. Wielage et al., Surface characterization of flax, hemp and cellulose fibers; Surface properties and the water uptake behavior, Polymer Composites, vol.13, issue.5, pp.872-894, 1951.
DOI : 10.1002/pc.10485

A. K. Bledzki and A. Jaszkiewicz, Mechanical performance of biocomposites based on PLA and PHBV reinforced with natural fibres ??? A comparative study to PP, Composites Science and Technology, vol.70, issue.12, pp.1687-1696, 2010.
DOI : 10.1016/j.compscitech.2010.06.005
URL : https://hal.archives-ouvertes.fr/hal-00671654

R. D. Blevins, Formulas for Natural Frequency and Mode Shape, Journal of Applied Mechanics, vol.47, issue.2, p.158, 1979.
DOI : 10.1115/1.3153712

E. Bodros, I. Pillin, N. Montrelay, and C. Baley, Could biopolymers reinforced by randomly scattered flax fibre be used in structural applications?, Composites Science and Technology, vol.67, issue.3-4, pp.462-470, 2007.
DOI : 10.1016/j.compscitech.2006.08.024
URL : https://hal.archives-ouvertes.fr/hal-00399338

P. Borg, S. Lebrun, and B. Pées, Example of Industrial Valorisation of derivative products of Castor Oil Castor Oil, Journées CHEVREUL 2009, pp.1-32

B. Borisova, Investigations on Environmental Stress Cracking Resistance of LDPE / EVA Blends, p.37, 2004.

E. C. Botelho, L. C. Pardini, and M. C. Rezende, Hygrothermal effects on damping behavior of metal/glass fiber/epoxy hybrid composites, Materials Science and Engineering: A, vol.399, issue.1-2, pp.190-198, 2005.
DOI : 10.1016/j.msea.2005.02.093

A. Bourmaud, G. Ausias, G. Lebrun, M. Tachon, and C. Baley, Observation of the structure of a composite polypropylene/flax and damage mechanisms under stress, Industrial Crops and Products, vol.43, pp.225-236, 0100.
DOI : 10.1016/j.indcrop.2012.07.030
URL : https://hal.archives-ouvertes.fr/hal-00985158

A. Bourmaud and C. Baley, Effects of thermo mechanical processing on the mechanical properties of??biocomposite flax fibers evaluated by nanoindentation, Polymer Degradation and Stability, vol.95, issue.9, pp.1488-1494, 2010.
DOI : 10.1016/j.polymdegradstab.2010.06.022
URL : https://hal.archives-ouvertes.fr/hal-00717233

A. Bourmaud, A. L. Duigou, and C. Baley, What is the technical and environmental interest in reusing a recycled polypropylene-hemp fibre composite ? Polymer Degradation and Stability, pp.1732-1739, 2011.

N. Brown, A fundamental theory for slow crack growth in polyethylene, Polymer, vol.36, issue.3, pp.543-548, 1995.
DOI : 10.1016/0032-3861(95)91563-M

I. Burgert and P. Fratzl, Plants control the properties and actuation of their organs through the orientation of cellulose fibrils in their cell walls, Integrative and Comparative Biology, vol.49, issue.1, pp.69-79, 2009.
DOI : 10.1093/icb/icp026

S. Butylina, M. Hyvärinen, and T. Kärki, A study of surface changes of wood-polypropylene composites as the result of exterior weathering, Polymer Degradation and Stability, vol.97, issue.3, pp.337-345, 2012.
DOI : 10.1016/j.polymdegradstab.2011.12.014

R. A. Cairncross, J. G. Becker, S. Ramaswamy, and R. O. Connor, Moisture sorption , transport, and hydrolytic degradation in polylactide. Applied biochemistry and biotechnology, pp.774-85, 2006.
DOI : 10.1007/978-1-59745-268-7_63

H. G. Carter and K. G. Kibler, Langmuir-Type Model for Anomalous Moisture Diffusion In Composite Resins, Journal of Composite Materials, vol.10, issue.2, pp.118-131, 1928.
DOI : 10.1177/002199837801200201

D. Chen, J. Li, and J. Ren, Influence of fiber surface-treatment on interfacial property of poly(l-lactic acid)/ramie fabric biocomposites under UV-irradiation hydrothermal aging, Materials Chemistry and Physics, vol.126, issue.3, pp.524-531, 2011.
DOI : 10.1016/j.matchemphys.2011.01.035

H. Chen, J. Chen, J. Chen, J. Yang, T. Huang et al., Effect of organic montmorillonite on cold crystallization and hydrolytic degradation of poly(llactide ) Polymer Degradation and Stability, pp.972273-2283, 2012.

K. Ho, F. Lau, D. Cardona, and . Hui, Natural fibre-reinforced composites for bioengineering and environmental engineering applications, Composites Part B : Engineering, vol.40, issue.7, pp.655-663, 2009.

S. Christian and S. Billington, Moisture diffusion and its impact on uniaxial tensile response of biobased composites, Composites Part B: Engineering, vol.43, issue.5, pp.2303-2312, 2012.
DOI : 10.1016/j.compositesb.2011.11.063

F. , C. Jr, and J. Thomason, Thermoelastic anisotropy of a natural fiber, Composites Science and Technology, vol.62, issue.5, pp.669-678, 2002.

S. Corn, J. Dupuy, P. Ienny, and L. Daridon, Vibration analysis techniques for detecting filler-matrix decohesion in composites, Revue des composites et des mat??riaux avanc??s, vol.22, issue.1, pp.77-90, 2012.
DOI : 10.3166/rcma.22.77-90
URL : https://hal.archives-ouvertes.fr/hal-00797606

J. Crank, The Mathematics Of Diffusion, p.132, 1975.

P. Davies, A. L. Duigou, and C. Baley, Vieillissement en eau de mer d'un biocomposite PLLA/lin, Revue des composites et des mat??riaux avanc??s, vol.18, issue.2, pp.239-244, 1955.
DOI : 10.3166/rcma.18.239-244
URL : https://hal.archives-ouvertes.fr/hal-00494866

I. M. De-rosa, C. Santulli, and F. Sarasini, Acoustic emission for monitoring the mechanical behaviour of natural fibre composites: A literature review, Composites Part A: Applied Science and Manufacturing, vol.40, issue.9, pp.1456-1469, 2009.
DOI : 10.1016/j.compositesa.2009.04.030

C. Deluzarche, Pétrole : bientôt la fin ?, 2005.

H. Dhakal, Z. Zhang, and M. Richardson, Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites, Composites Science and Technology, vol.67, issue.7-8, pp.1674-1683, 2007.
DOI : 10.1016/j.compscitech.2006.06.019

M. L. Di-lorenzo, M. Cocca, and M. Malinconico, Crystal polymorphism of poly(l-lactic acid) and its influence on thermal properties, Thermochimica Acta, vol.522, issue.1-2, pp.110-117, 2011.
DOI : 10.1016/j.tca.2010.12.027

D. B. Dittenber and H. V. Gangarao, Critical review of recent publications on use of natural composites in infrastructure, Composites Part A: Applied Science and Manufacturing, vol.43, issue.8, pp.1419-1429, 2011.
DOI : 10.1016/j.compositesa.2011.11.019

A. K. Doolittle, Studies in Newtonian Flow. II. The Dependence of the Viscosity of Liquids on Free???Space, Journal of Applied Physics, vol.22, issue.12, pp.1471-1502, 1951.
DOI : 10.1063/1.1699894

. Droit, Vocabulaire de l'environnement (liste de termes, expressions et définitions adoptés, 2009.

R. E. Drumright, P. R. Gruber, and D. E. Henton, Polylactic Acid Technology, Advanced Materials, vol.12, issue.23, pp.1841-1846, 1991.
DOI : 10.1002/1521-4095(200012)12:23<1841::AID-ADMA1841>3.0.CO;2-E

J. Dupuy, P. Ienny, S. Corn, and L. Daridon, Comparaison de méthodes dynamiques d'analyse du comportement mécanique de matériaux, 18ème Congrès Français de Mécanique, pp.6-77, 2007.

A. Durier, ContributionàContributionà l'´ etude de l'interaction contraintes-diffusion dans les polymères, p.26, 2008.

J. S. Fabiyi, A. G. Mcdonald, M. P. Wolcott, and P. R. Griffiths, Wood plastic composites weathering: Visual appearance and chemical changes, Polymer Degradation and Stability, vol.93, issue.8, pp.1405-1414, 2008.
DOI : 10.1016/j.polymdegradstab.2008.05.024

S. Fakirov, Handbook of Thermoplastic Polyesters, 1936.
DOI : 10.1002/3527601961

G. Faludi, G. Dora, K. Renner, J. Móczó, and B. Pukánszky, Biocomposite from polylactic acid and lignocellulosic fibers: Structure???property correlations, Carbohydrate Polymers, vol.92, issue.2, pp.1767-75, 0105.
DOI : 10.1016/j.carbpol.2012.11.006

O. Faruk, A. K. Bledzki, H. Fink, and M. Sain, Biocomposites reinforced with natural fibers: 2000???2010, Progress in Polymer Science, vol.37, issue.11, pp.1552-1596, 1954.
DOI : 10.1016/j.progpolymsci.2012.04.003

B. Fayolle and J. Verdu, Vieillissement physique des matériaux polymères, Techniques De L'Ingénieur, pp.1-19, 2005.

J. Férec, M. Heuzey, G. Ausias, and P. Carreau, Rheological behavior of fiber-filled polymers under large amplitude oscillatory shear flow, Journal of Non-Newtonian Fluid Mechanics, vol.151, issue.1-3, pp.89-100, 1989.
DOI : 10.1016/j.jnnfm.2008.01.002

V. L. Finkenstadt, C. Liu, R. Evangelista, L. Liu, S. C. Cermak et al., Poly(lactic acid) green composites using oilseed coproducts as fillers, Industrial Crops and Products, vol.26, issue.1, pp.36-43, 2007.
DOI : 10.1016/j.indcrop.2007.01.003
URL : https://naldc.nal.usda.gov/naldc/download.xhtml?id=19331&content=PDF

E. W. Fischer, H. J. Sterzel, and G. Wegner, Investigation of the structure of solution grown crystals of lactide copolymers by means of chemical reactions. Kolloid- Zeitschrift & Zeitschrift fur Polymere, pp.251980-990, 1973.

M. Flandrin-bletty, Technologie et chimie des textiles, Cépadù es Editions, p.12, 1995.

P. J. Flory, Principles of polymer chemistry, 1921.

M. Foulc, A. Bergeret, L. Ferry, P. Ienny, and A. Crespy, Study of hygrothermal ageing of glass fibre reinforced PET composites, Polymer Degradation and Stability, vol.89, issue.3, pp.461-470, 2005.
DOI : 10.1016/j.polymdegradstab.2005.01.025

M. Foulc, A. Bergeret, P. Ienny, L. Ferry, and A. Crespy, Caractérisation du vieillissement hygrothermique de matériaux composites PET/fibres de verre par photomécanique, Matériaux Matériaux Proceedings, pp.1-5, 2002.

K. Fukushima, C. Abbate, D. Tabuani, M. Gennari, and G. Camino, Biodegradation of poly(lactic acid) and its nanocomposites, Polymer Degradation and Stability, vol.94, issue.10, pp.1646-1655, 2009.
DOI : 10.1016/j.polymdegradstab.2009.07.001

J. Gamez-perez, Fracture behavior of quenched poly(lactic acid). eXPRESS Polymer Letters, pp.82-91, 0116.

D. Garlotta, A Literature Review of Poly (Lactic Acid), Journal of Polymers and the Environment, vol.9, issue.2, pp.63-84, 2001.
DOI : 10.1023/A:1020200822435

J. Gassan, A study of fibre and interface parameters affecting the fatigue behaviour of natural fibre composites, Composites Part A: Applied Science and Manufacturing, vol.33, issue.3, pp.369-374, 1957.
DOI : 10.1016/S1359-835X(01)00116-6

P. Contributionàcontributionà-l-'´-etude-du-vieillissement-couplé-thermo-hydro-mécanique-de-biocomposites, A. Gattin, C. Copinet, Y. Bertrand, and . Couturier, Biodegradation study of a coextruded starch and poly(lactic acid) material in various media, Journal of Applied Polymer Science, vol.88, issue.3, pp.825-831, 0111.

J. George, Effects of environment on the properties of low-density polyethylene composites reinforced with pineapple-leaf fibre, Composites Science and Technology, vol.58, issue.9, pp.1471-1485, 1997.
DOI : 10.1016/S0266-3538(97)00161-9

R. F. Gibson, Modal vibration response measurements for characterization of composite materials and structures, Composites Science and Technology, vol.60, issue.15, pp.2769-2780, 2000.
DOI : 10.1016/S0266-3538(00)00092-0

F. Gouanvé, S. Marais, D. Bessadok, M. Langevin, and . Métayer, Kinetics of water sorption in flax and PET fibers, European Polymer Journal, vol.43, issue.2, pp.586-598, 2007.
DOI : 10.1016/j.eurpolymj.2006.10.023

N. Graupner, A. S. Herrmann, and J. Müssig, Natural and man-made cellulose fibre-reinforced poly(lactic acid) (PLA) composites: An overview about mechanical characteristics and application areas, Composites Part A: Applied Science and Manufacturing, vol.40, issue.6-7, pp.6-7810, 2009.
DOI : 10.1016/j.compositesa.2009.04.003

V. Gupta, J. Radhakrishnan, and S. Sett, Interaction between thermal shrinkage and crystallization in axially oriented poly(ethylene terephthalate) fibres and films, Polymer, vol.34, issue.18, pp.3814-3822, 0101.
DOI : 10.1016/0032-3861(93)90505-5

C. M. Hansen and L. Just, Prediction of Environmental Stress Cracking in Plastics with Hansen Solubility Parameters, Industrial & Engineering Chemistry Research, vol.40, issue.1, pp.21-25, 2001.
DOI : 10.1021/ie9904955

D. E. Henton, P. Gruber, J. Lunt, and J. Randall, Polylactic Acid Technology, Natural Fibers, Biopolymers, and Biocomposites, chapter 16, pp.527-577, 2005.
DOI : 10.1201/9780203508206.ch16

A. Hidayat and S. Tachibana, Characterization of polylactic acid (PLA)/kenaf composite degradation by immobilized mycelia of Pleurotus ostreatus, International Biodeterioration & Biodegradation, vol.71, pp.50-54, 2012.
DOI : 10.1016/j.ibiod.2012.02.007

R. Hu, M. Sun, and J. Lim, Moisture absorption, tensile strength and microstructure evolution of short jute fiber/polylactide composite in hygrothermal environment, Materials & Design, vol.31, issue.7, pp.313167-3173, 2010.
DOI : 10.1016/j.matdes.2010.02.030

M. S. Huda, L. T. Drzal, A. K. Mohanty, and M. Misra, Effect of fiber surface-treatments on the properties of laminated biocomposites from poly(lactic acid) (PLA) and kenaf fibers, Composites Science and Technology, vol.68, issue.2, pp.424-432, 2008.
DOI : 10.1016/j.compscitech.2007.06.022

S. Hwang and C. Chang, Determination of elastic constants of materials by vibration testing, Composite Structures, vol.49, issue.2, pp.183-190, 2000.
DOI : 10.1016/S0263-8223(99)00132-4

M. S. Islam, The Influence of Fibre Processing and Treatments on Hemp Fibre / Epoxy and Hemp Fibre / PLA Composites, p.56, 2008.

M. S. Islam, K. L. Pickering, and N. J. Foreman, Influence of accelerated ageing on the physico-mechanical properties of alkali-treated industrial hemp fibre reinforced poly(lactic acid) (PLA) composites, Polymer Degradation and Stability, vol.95, issue.1, pp.59-65, 1956.
DOI : 10.1016/j.polymdegradstab.2009.10.010

S. A. Jabarin, E. A. Lofgren, and S. Sakumoto, Aging and environmental stress cracking of PET, its copolymers and blends. In Fakirov, editor, Handbook of thermoplastic polyesters, chapter 22, pp.965-1089, 2002.

F. Jacquemin, S. Fréour, and R. Guillén, Prediction of local hygroscopic stresses for composite structures ??? Analytical and numerical micro-mechanical approaches, Composites Science and Technology, vol.69, issue.1, pp.17-21, 0133.
DOI : 10.1016/j.compscitech.2007.10.031

N. Jarroux, Les biopolymères : différentes familles, propriétés et applications, AM, vol.10, issue.3580, pp.1-16, 2008.

R. Joffe, J. Andersons, and L. Wallström, Strength and adhesion characteristics of elementary flax fibres with different surface treatments, Composites Part A: Applied Science and Manufacturing, vol.34, issue.7, pp.603-612, 0104.
DOI : 10.1016/S1359-835X(03)00099-X

M. J. John and S. Thomas, Biofibres and biocomposites, Carbohydrate Polymers, vol.71, issue.3, pp.343-364, 2008.
DOI : 10.1016/j.carbpol.2007.05.040

P. Joseph, K. Joseph, and S. Thomas, Effect of processing variables on the mechanical properties of sisal-fiber-reinforced polypropylene composites, Composites Science and Technology, vol.59, issue.11, pp.1625-1640, 1999.
DOI : 10.1016/S0266-3538(99)00024-X

P. Joseph, M. S. Rabello, L. Mattoso, K. Joseph, and S. Thomas, Environmental effects on the degradation behaviour of sisal fibre reinforced polypropylene composites, Composites Science and Technology, vol.62, issue.10-11, pp.10-111357, 2002.
DOI : 10.1016/S0266-3538(02)00080-5

G. Kale, R. Auras, and S. P. Singh, Degradation of Commercial Biodegradable Packages under Real Composting and Ambient Exposure Conditions, Journal of Polymers and the Environment, vol.7, issue.3, pp.317-334, 2006.
DOI : 10.1007/s10924-006-0015-6

G. Kale, R. Auras, S. P. Singh, and R. Narayan, Biodegradability of polylactide bottles in real and simulated composting conditions, Polymer Testing, vol.26, issue.8, pp.1049-1061, 2007.
DOI : 10.1016/j.polymertesting.2007.07.006

G. Kale, T. Kijchavengkul, R. Auras, M. Rubino, S. E. Selke et al., Compostability of Bioplastic Packaging Materials: An Overview, Macromolecular Bioscience, vol.130, issue.3, pp.255-277, 2001.
DOI : 10.1002/mabi.200600168

P. G. Kelleher, R. P. Wentz, M. Y. Hellman, and E. H. Gilbert, The hydrolytic stability of glass fiber reinforced poly(butylene terephthalate), poly(ethylene terephthalate) and polycarbonate, Polymer Engineering and Science, vol.6, issue.10, pp.537-542, 1922.
DOI : 10.1002/pen.760231002

H. Kim and H. Kim, Enhanced hydrolysis resistance of biodegradable polymers and bio-composites, Polymer Degradation and Stability, vol.93, issue.8, pp.1544-1553, 0153.
DOI : 10.1016/j.polymdegradstab.2008.05.004

A. J. Kovacs, J. J. Aklonis, J. M. Hutchinson, and A. R. Ramos, Isobaric volume and enthalpy recovery of glasses. II. A transparent multiparameter theory, Essais des plastiques renforcés. Techniques De L'Ingénieur, pp.1097-11621, 1979.
DOI : 10.1002/polb.1996.944

P. Krawczak, Essais mécaniques des plastiques -CaractéristiquesCaractéristiquesà long terme et ténacité, AM, issue.3511, pp.1-29, 1999.

P. Krawczak, Essais mécaniques des plastiques -Caractéristiques instantanées, Techniques De L'Ingénieur, AM, vol.79, issue.3510, pp.1-20, 1999.

H. Ku, H. Wang, N. Pattarachaiyakoop, and M. Trada, A review on the tensile properties of natural fiber reinforced polymer composites, Composites Part B: Engineering, vol.42, issue.4, pp.856-873, 2011.
DOI : 10.1016/j.compositesb.2011.01.010

E. Lacoste, Modélisation et simulation multi-´ echelles des contraintes d'´ elaboration et de service dans les matériaux composites, p.131, 2010.

K. Lange, The bioplastics market : an overview, Bio- Plastics Conference, pp.1-30

A. Le-duigou, A. Bourmaud, E. Balnois, P. Davies, and C. Baley, Improving the interfacial properties between flax fibres and PLLA by a water fibre treatment and drying cycle, Industrial Crops and Products, vol.39, pp.31-39, 2012.
DOI : 10.1016/j.indcrop.2012.02.001
URL : https://hal.archives-ouvertes.fr/hal-00714954

A. L. Duigou, P. Davies, and C. Baley, Etude de la liaison interfaciale fibre de lin-acide poly(L-lactique), Comptes Rendus des JNC 16, pp.10-53, 2009.

A. L. Duigou, P. Davies, and C. Baley, Seawater ageing of flax/poly(lactic acid) biocomposites, Polymer Degradation and Stability, vol.94, issue.7, pp.1151-1162, 2009.
DOI : 10.1016/j.polymdegradstab.2009.03.025

A. L. Duigou, P. Davies, and C. Baley, Interfacial bonding of Flax fibre/Poly(l-lactide) bio-composites, Composites Science and Technology, vol.70, issue.2, pp.231-239, 2010.
DOI : 10.1016/j.compscitech.2009.10.009
URL : https://hal.archives-ouvertes.fr/hal-00988061

A. L. Duigou, P. Davies, and C. Baley, Macroscopic analysis of interfacial properties of flax/PLLA biocomposites, Composites Science and Technology, vol.70, issue.11, pp.1612-1620, 2010.
DOI : 10.1016/j.compscitech.2010.06.001
URL : https://hal.archives-ouvertes.fr/hal-00666484

A. L. Duigou, I. Pillin, A. Bourmaud, P. Davies, and C. Baley, Effect of recycling on mechanical behaviour of biocompostable flax/poly(l-lactide) composites, Composites Part A: Applied Science and Manufacturing, vol.39, issue.9, pp.1471-1478, 2008.
DOI : 10.1016/j.compositesa.2008.05.008
URL : https://hal.archives-ouvertes.fr/hal-00400328

N. and L. Moigne, Swelling And Dissolution Mechanisms Of Cellulose Fibres, 2008.
URL : https://hal.archives-ouvertes.fr/tel-00353429

B. Ledieu, Vieillissement en milieu eau/glycol du polyamide 66 renforce fibres de verres courtes pour l'application boitè a eau de radiateur de refroidissement moteur, pp.22-91, 2010.

S. H. Lee and S. Wang, Biodegradable polymers/bamboo fiber biocomposite with bio-based coupling agent, Composites Part A: Applied Science and Manufacturing, vol.37, issue.1, pp.80-91, 2006.
DOI : 10.1016/j.compositesa.2005.04.015

S. Lefaux, Biodégradation de films polymèrespolymèresà usage agricole : Caractérisation physico-chimique des résidus et identification biomoléculaire des bactéries actives, 2005.

R. Léger, ContributionàContributionà l'´ etude de la durabilité des structures collées soumisesàsoumises`soumisesà des efforts mécaniques après vieillissement humide, Ecole Nationale Supérieure de Mécanique et d'Aérotechnique, p.133, 2010.

L. Lim, R. Auras, and M. Rubino, Processing technologies for poly(lactic acid) Progress in Polymer Science, pp.820-852, 2008.

X. Lu, R. Qian, and N. Brown, The effect of crystallinity on fracture and yielding of polyethylenes, Polymer, vol.36, issue.22, pp.4239-4244, 1995.
DOI : 10.1016/0032-3861(95)92219-5

A. Lustiger, Understanding Environmental Stress Cracking in Polyethylene Medical plastics : degradation resistance & failure analysis, pp.65-71, 1998.

A. Lustiger and R. D. Corneliussen, The role of crazes in the crack growth of polyethylene, Journal of Materials Science, vol.11, issue.7, pp.2470-2476, 1987.
DOI : 10.1007/BF01082132

S. Lyu and D. Untereker, Degradability of Polymers for Implantable Biomedical Devices, International Journal of Molecular Sciences, vol.10, issue.9, pp.4033-65, 2009.
DOI : 10.3390/ijms10094033

K. Madhavan-nampoothiri, N. R. Nair, and R. P. John, An overview of the recent developments in polylactide (PLA) research, Bioresource Technology, vol.101, issue.22, pp.8493-8501, 2010.
DOI : 10.1016/j.biortech.2010.05.092

B. Madsen, Properties of Plant Fibre Yarn Polymer Composites, p.138, 2004.

B. Madsen, P. Hoffmeyer, and H. Lilholt, Hemp yarn reinforced composites ??? III. Moisture content and dimensional changes, Composites Part A: Applied Science and Manufacturing, vol.43, issue.11, pp.2151-2160, 1951.
DOI : 10.1016/j.compositesa.2012.07.010

N. Marcovich, M. Reboredo, and M. Aranguren, Moisture diffusion in polyester???woodflour composites, Polymer, vol.40, issue.26, pp.7313-7320, 0138.
DOI : 10.1016/S0032-3861(99)00093-2

P. E. Marec, Modélisation du mélangeagè a l'´ etat fondu de biocomposites PLA / fibres de cellulose, p.89, 2011.

R. Martin, Ageing of composites, p.56, 2008.

A. S. Maxwell, W. R. Broughton, G. Dean, and G. D. Sims, Review of accelerated ageing methods, p.39, 2005.

C. Meirhaeghe, ´ Evaluation de la disponibilité et de l'accessibilité de fibres végétales végétalesà usages matériaux en France, ADEME, p.51, 2011.

J. Mercier, Prise en compte du vieillissement et de l'endommagement dans le dimensionnement de structures en matériaux composites, p.109, 2006.

J. Mercier, A. Bunsell, P. Castaing, and J. Renard, Caract??risation et mod??lisation du vieillissement de mat??riaux composites, Revue des composites et des mat??riaux avanc??s, vol.15, issue.2, pp.189-219, 2005.
DOI : 10.3166/rcma.15.189-219

J. Mercier, A. Bunsell, P. Castaing, and J. Renard, Characterisation and modelling of aging of composites, Composites Part A: Applied Science and Manufacturing, vol.39, issue.2, pp.428-438, 2008.
DOI : 10.1016/j.compositesa.2007.08.015
URL : https://hal.archives-ouvertes.fr/hal-00144507

M. Meyers and K. Chawla, Mechanical Behavior of Materials, p.42, 2009.
DOI : 10.1017/CBO9780511810947

A. K. Mohanty, M. Misra, and L. T. , Natural fibers, biopolymers, and biocomposites, 1944.
DOI : 10.1201/9780203508206.ch1

A. K. Mohanty, M. Misra, and G. Hinrichsen, Biofibres, biodegradable polymers and biocomposites: An overview, Macromolecular Materials and Engineering, vol.276, issue.1, pp.276-2771, 1952.
DOI : 10.1002/(SICI)1439-2054(20000301)276:1<1::AID-MAME1>3.0.CO;2-W

B. Mortaigne, Vieillissement des compositesÉvolutioncomposites´compositesÉvolution des propriétés et modélisation, AM, issue.5321, pp.1-22, 2005.

J. Müssig, Industrial Applications of Natural Fibres, p.166, 2010.
DOI : 10.1002/9780470660324

B. S. Ndazi, Characterization of hydrolytic degradation of polylactic acid/rice hulls composites in water at different temperatures, Express Polymer Letters, vol.5, issue.2, pp.119-131, 2011.
DOI : 10.3144/expresspolymlett.2011.13

S. Neumann and G. Marom, Free-volume dependent moisture diffusion under stress in composite materials, Journal of Materials Science, vol.6, issue.1, pp.26-30, 1986.
DOI : 10.1007/BF01144694

N. Nosbi, H. M. Akil, Z. M. Ishak, and . Bakar, Degradation of compressive properties of pultruded kenaf fiber reinforced composites after immersion in various solutions, Materials & Design, vol.31, issue.10, pp.314960-4964, 1925.
DOI : 10.1016/j.matdes.2010.04.037

T. Ohkita and S. Lee, Thermal degradation and biodegradability of poly (lactic acid)/corn starch biocomposites, Journal of Applied Polymer Science, vol.89, issue.4, pp.3009-3017, 1959.
DOI : 10.1002/app.23425

K. Oksman, Natural fibres as reinforcement in polylactic acid (PLA) composites, Composites Science and Technology, vol.63, issue.9, pp.1317-1324, 2003.
DOI : 10.1016/S0266-3538(03)00103-9

C. Oudet, Polymères -Structure et propriétés, introduction, p.36, 1993.

P. Pan and Y. Inoue, Polymorphism and isomorphism in biodegradable polyesters, Progress in Polymer Science, vol.34, issue.7, pp.605-640, 1994.
DOI : 10.1016/j.progpolymsci.2009.01.003

R. Pantani, I. Coccorullo, V. Speranza, and G. Titomanlio, Modeling of morphology evolution in the injection molding process of thermoplastic polymers, Progress in Polymer Science, vol.30, issue.12, pp.1185-1222, 0100.
DOI : 10.1016/j.progpolymsci.2005.09.001

S. Panthapulakkal and M. Sain, Agro-residue reinforced high-density polyethylene composites: Fiber characterization and analysis of composite properties, Composites Part A: Applied Science and Manufacturing, vol.38, issue.6, pp.1445-1454, 2007.
DOI : 10.1016/j.compositesa.2007.01.015

J. Park, S. T. Quang, B. Hwang, and K. L. Devries, Interfacial evaluation of modified Jute and Hemp fibers/polypropylene (PP)-maleic anhydride polypropylene copolymers (PP-MAPP) composites using micromechanical technique and nondestructive acoustic emission, Composites Science and Technology, vol.66, issue.15, pp.662686-2699, 2006.
DOI : 10.1016/j.compscitech.2006.03.014

. Polylactide, montmorillonite nanocomposites : study of the hydrolytic degradation, Polymer Degradation and Stability, vol.87, issue.3, pp.535-542, 1985.

V. Placet, Conception et exploitation d'un dispositif expérimental innovant pour la caractérisation du comportement viscoélastique et de la dégradation thermique du bois dans des conditions sévères, p.52, 2006.

V. Placet, Characterization of the thermo-mechanical behaviour of Hemp fibres intended for the manufacturing of high performance composites, Composites Part A: Applied Science and Manufacturing, vol.40, issue.8, pp.1111-1118, 2009.
DOI : 10.1016/j.compositesa.2009.04.031
URL : https://hal.archives-ouvertes.fr/hal-00395479

V. Placet, Influence de traitements hygrothermiques sur les propriétés mécaniques de compositesàcompositesà fibres végétales, Comptes Rendus des JNC 16, p.58, 2009.

V. Placet, O. Cissé, and M. L. Boubakar, Nonlinear tensile behaviour of elementary hemp fibres. Part I: Investigation of the possible origins using repeated progressive loading with in situ microscopic observations, Composites Part A: Applied Science and Manufacturing, vol.56, 2012.
DOI : 10.1016/j.compositesa.2012.11.019

D. Plackett, T. Løgstrup-andersen, W. Batsberg-pedersen, and L. Nielsen, Biodegradable composites based on l-polylactide and jute fibres, Composites Science and Technology, vol.63, issue.9, pp.1287-1296, 2003.
DOI : 10.1016/S0266-3538(03)00100-3

. Plasticseurope, An analysis of European plastics production, demand and waste data for 2011, p.161, 2012.

N. Pons, Développement de biocompositesàbiocomposites`biocompositesà base de PLA et de fibres de verre altérables -Etude des mécanismes interfaciaux, pp.46-162, 2009.

. Free, bound water absorption in an epoxy adhesive, Polymer, vol.46, issue.24, pp.10733-10740, 1928.

C. Pouteau, Quelles avancées pour les compositesàcompositesà fibres naturelles ? In Colloque " Chanvre, Poitier, issue.2, 2010.

C. S. Proikakis, N. J. Mamouzelos, P. A. Tarantili, and A. G. Andreopoulos, Swelling and hydrolytic degradation of poly(d,l-lactic acid) in aqueous solutions, Polymer Degradation and Stability, vol.91, issue.3, pp.614-619, 2006.
DOI : 10.1016/j.polymdegradstab.2005.01.060

L. Qin, J. Qiu, M. Liu, S. Ding, L. Shao et al., Mechanical and thermal properties of poly(lactic acid) composites with rice straw fiber modified by poly(butyl acrylate), Chemical Engineering Journal, vol.166, issue.2, pp.772-778, 1953.
DOI : 10.1016/j.cej.2010.11.039

R. M. Rasal, A. V. Janorkar, and D. E. Hirt, Poly(lactic acid) modifications, Progress in Polymer Science, pp.338-356, 1946.
DOI : 10.1016/j.progpolymsci.2009.12.003

L. P. Real, A. P. Rocha, and J. Gardette, Artificial accelerated weathering of poly(vinyl chloride) for outdoor applications, Polymer Degradation and Stability, vol.82, issue.2, pp.235-243, 2003.
DOI : 10.1016/S0141-3910(03)00217-9

A. S. Ribnick and H. Wkigmann, Interactions of Nonaqueous Solvents with Textile Fibers Part III: The Dynamic Shrinkage of Polyester Yarns in Organic Solvents1, Textile Research Journal, vol.43, issue.6, pp.316-325, 1973.
DOI : 10.1177/004051757304300602

A. Roudier, Analyse multi-´ echelle du comportement hygro-mécanique des fibres de lin, p.161

A. Roudier, K. Charlet, F. Moreno, E. Toussaint, C. Géneau-sbarta¨?sbarta¨? et al., Caract??risation des propri??t??s biochimiques et hygroscopiques d???une fibre de lin, Mat??riaux & Techniques, vol.100, issue.5, pp.525-535, 1951.
DOI : 10.1051/mattech/2012044

D. Rutot and P. Dubois, Les (bio)polymères biodégradables : l'enjeu de demain ? Chimie nouvelle, pp.66-75, 2004.

S. Saeidlou, M. A. Huneault, H. Li, and C. B. Park, Poly(lactic acid) crystallization, Progress in Polymer Science, pp.1657-1677, 1948.
DOI : 10.1016/j.progpolymsci.2012.07.005

E. L. Sambha-'a, A. Lallam, and A. Jada, Effect of Hydrothermal Polylactic Acid Degradation on Polymer Molecular Weight and Surface Properties, Journal of Polymers and the Environment, vol.94, issue.4, pp.532-538, 2010.
DOI : 10.1007/s10924-010-0251-7

K. G. Satyanarayana, G. G. Arizaga, and F. Wypych, Biodegradable composites based on lignocellulosic fibers???An overview, Progress in Polymer Science, vol.34, issue.9, pp.982-1021, 2009.
DOI : 10.1016/j.progpolymsci.2008.12.002

D. Scida, M. Assarar, C. Poilâne, and R. Ayad, Influence of hygrothermal ageing on the damage mechanisms of flax-fibre reinforced epoxy composite, Composites Part B: Engineering, vol.48, issue.114, pp.51-58, 2012.
DOI : 10.1016/j.compositesb.2012.12.010

D. Sedan, Etude des interactions physico-chimiques aux interfaces fibres de chanvre/ciment. Influence sur les propriétés mécaniques du composite, 2007.

R. Simha and R. F. Boyer, On a General Relation Involving the Glass Temperature and Coefficients of Expansion of Polymers, The Journal of Chemical Physics, vol.37, issue.5, pp.1003-1035, 1962.
DOI : 10.1063/1.1733201

B. Singh and N. Sharma, Mechanistic implications of plastic degradation, Polymer Degradation and Stability, vol.93, issue.3, pp.561-584, 1921.
DOI : 10.1016/j.polymdegradstab.2007.11.008

G. L. Siparsky, K. J. Voorhees, J. R. Dorgan, and K. Schilling, Water transport in polylactic acid (PLA), PLA/polycaprolactone copolymers, and PLA/polyethylene glycol blends, Journal of environmental polymer degradation, vol.5, issue.3, pp.125-136, 1997.

A. Södergå-rd and M. Stolt, Properties of lactic acid based polymers and their correlation with composition, Progress in Polymer Science, pp.1123-1163, 2002.

P. Song, G. Chen, Z. Wei, W. Zhang, and J. Liang, Calorimetric analysis of the multiple melting behavior of melt-crystallized poly(l-lactic acid) with a low optical purity, Journal of Thermal Analysis and Calorimetry, vol.66, issue.2, pp.1507-1514, 2012.
DOI : 10.1007/s10973-012-2502-4

Y. S. Song, J. T. Lee, D. S. Ji, M. W. Kim, S. H. Lee et al., Viscoelastic and thermal behavior of woven hemp fiber reinforced poly(lactic acid) composites, Composites Part B: Engineering, vol.43, issue.3, pp.856-860, 2012.
DOI : 10.1016/j.compositesb.2011.10.021

H. Spatz, L. Köhler, and K. J. Niklas, Mechanical behaviour of plant tissues : composite materials or structures ? The Journal of experimental biology, pp.3269-72, 1999.

P. Sreekumar, J. Saiter, and S. Thomas, Water absorption and ageing behaviour of natural fiber composites Archives contemporaines, Natural Fibre Reinforced Polymer Composites : From Macro to Nanoscale, chapter 17, pp.446-472, 2009.

A. Stamboulis, C. Baillie, and T. Peijs, Effects of environmental conditions on mechanical and physical properties of flax fibers, Composites Part A: Applied Science and Manufacturing, vol.32, issue.8, pp.1105-1115, 0138.
DOI : 10.1016/S1359-835X(01)00032-X

C. Suri and D. Perreux, The effects of mechanical damage in a glass fibre/epoxy composite on the absorption rate, Composites Engineering, vol.5, issue.4, pp.415-424, 1995.
DOI : 10.1016/0961-9526(94)00014-Z

T. Tabi, Crystalline structure of annealed polylactic acid and its relation to processing . eXPRESS Polymer Letters, pp.659-668, 1996.

A. Tcharkhtchi, P. Bronnec, and J. Verdu, Water absorption characteristics of diglycidylether of butane diol???3,5-diethyl-2,4-diaminotoluene networks, Polymer, vol.41, issue.15, pp.415777-5785, 1928.
DOI : 10.1016/S0032-3861(99)00801-0

J. L. Thomason, Investigation of composite interphase using dynamic mechanical analysis: Artifacts and reality, Polymer Composites, vol.18, issue.2, pp.105-113, 0104.
DOI : 10.1002/pc.750110206

A. N. Towo and M. P. , Fatigue evaluation and dynamic mechanical thermal analysis of sisal fibre???thermosetting resin composites, Composites Science and Technology, vol.68, issue.3-4, pp.925-932, 1957.
DOI : 10.1016/j.compscitech.2007.08.022
URL : https://hal.archives-ouvertes.fr/hal-00550274

H. Tsuji and Y. Ikada, Properties and morphology of poly(L-lactide). II. hydrolysis in alkaline solution, Journal of Polymer Science Part A: Polymer Chemistry, vol.36, issue.1, pp.59-66, 0111.
DOI : 10.1002/(SICI)1099-0518(19980115)36:1<59::AID-POLA9>3.0.CO;2-X

H. Tsuji, A. Mizuno, and Y. Ikada, Properties and morphology of poly(L-lactide). III. Effects of initial crystallinity on long-termin vitro hydrolysis of high molecular weight poly(L-lactide) film in phosphate-buffered solution, Journal of Applied Polymer Science, vol.16, issue.7, pp.1452-1464, 2000.
DOI : 10.1002/1097-4628(20000815)77:7<1452::AID-APP7>3.0.CO;2-S

H. Tsuji and K. Suzuyoshi, Environmental degradation of biodegradable polyesters 1. Poly(??-caprolactone), poly[(R)-3-hydroxybutyrate], and poly(L-lactide) films in controlled static seawater, Polymer Degradation and Stability, vol.75, issue.2, pp.347-355, 2002.
DOI : 10.1016/S0141-3910(01)00240-3

J. Vallade, Structure et développement de la plante : Morphogenèse et biologie de la reproduction des Angiospermes. Dunod, p.161, 1999.

M. J. Van-den-oever, B. Beck, and J. Müssig, Agrofibre reinforced poly(lactic acid) composites: Effect of moisture on degradation and mechanical properties, Composites Part A: Applied Science and Manufacturing, vol.41, issue.11, pp.1628-1635, 1953.
DOI : 10.1016/j.compositesa.2010.07.011

M. A. Van-es, Polymer-clay nanocomposites : the importance of particle dimensions, p.146, 2001.

D. Van-krevelen, Properties Of Polymers, p.32, 2009.

J. Verdu, Action de l'eau sur les plastiques, Techniques De L'Ingénieur, AM, vol.35, issue.3165, pp.1-8, 2000.

J. Verdu, Vieillissement chimique des plastiques : aspects généraux, Techniques De L'Ingénieur, AM, vol.23, issue.3151, pp.1-14, 2002.

F. Vilaplana, E. Strömberg, and S. Karlsson, Environmental and resource aspects of sustainable biocomposites, Polymer Degradation and Stability, vol.95, issue.11, pp.2147-2161, 2010.
DOI : 10.1016/j.polymdegradstab.2010.07.016

E. T. Vink, S. Davies, and J. J. Kolstad, polylactide production, Industrial Biotechnology, vol.6, issue.4, pp.212-224, 2010.
DOI : 10.1089/ind.2010.6.212

H. Wang, B. Pan, Q. Du, and Y. Li, The strain in the test environmental stress cracking of plastics, Polymer Testing, vol.22, issue.2, pp.125-128, 2003.
DOI : 10.1016/S0142-9418(02)00042-9

Y. Wang and J. A. Mano, Influence of melting conditions on the thermal behaviour of poly(l-lactic acid), European Polymer Journal, vol.41, issue.10, pp.2335-2342, 2005.
DOI : 10.1016/j.eurpolymj.2005.04.030

P. /. Contributionàcontributionà-l-'´-etude-du-vieillissement-couplé-thermo-hydro-mécanique-de-biocomposites, B. Lin-wang, S. Tong, M. Hou, C. Li et al., Transcrystallization behavior at the poly(lactic acid)/sisal fibre biocomposite interface, Composites Part A : Applied Science and Manufacturing, vol.209, issue.421, pp.66-74, 2011.

Y. J. Weitsman, Effects of Fluids on Polymeric Composites???A Review, Comprehensive Composite Materials, chapter, pp.369-401, 2000.
DOI : 10.1016/B0-08-042993-9/00068-1

Y. J. Weitsman, Fluid Effects in Polymers and Polymeric Composites, Mechanical Engineering Series, p.27, 2012.
DOI : 10.1007/978-1-4614-1059-1

Y. J. Weitsman and M. Elahi, Effects of Fluids on the Deformation, Strength and Durability of Polymeric Composites -An Overview, Mechanics of Time-Dependent Materials, pp.107-126, 2000.

J. R. White, Weathering of polymers: mechanisms of degradation and stabilization, testing strategies and modelling, Journal of Materials Science, vol.28, issue.177, pp.475-613, 1994.
DOI : 10.1007/BF00445969

M. L. Williams, R. F. Landel, and J. D. Ferry, The Temperature Dependence of Relaxation Mechanisms in Amorphous Polymers and Other Glass-forming Liquids, Journal of the American Chemical Society, vol.77, issue.14, pp.773701-3707, 1955.
DOI : 10.1021/ja01619a008

N. L. Williams and . Portal, Evaluation of heat and moisture induced stress and strain of historic building materials and artefacts, p.133, 2011.

R. Wimberger-friedl, The assessment of orientation, stress and density distributions in injection-molded amorphous polymers by optical techniques, Progress in Polymer Science, vol.20, issue.3, pp.369-401, 1995.
DOI : 10.1016/0079-6700(94)00036-2

D. Wright, Environmental Stress Cracking of Plastics. Smithers Rapra Technology, p.39, 1996.

G. Xiao and M. E. Shanahan, Swelling of DGEBA/DDA epoxy resin during hygrothermal ageing, Polymer, vol.39, issue.14, pp.3253-3260, 1998.
DOI : 10.1016/S0032-3861(97)10060-X

L. Yan, N. Chouw, and K. Jayaraman, Flax fibre and its composites ??? A review, Composites Part B: Engineering, vol.56, pp.296-317, 2014.
DOI : 10.1016/j.compositesb.2013.08.014

M. Yasuniwa, K. Iura, and Y. Dan, Melting behavior of poly(l-lactic acid): Effects of crystallization temperature and time, Polymer, vol.48, issue.18, pp.5398-5407, 2007.
DOI : 10.1016/j.polymer.2007.07.012

G. Yew, .. M. Mohd-yusof, Z. M. Ishak, and U. Ishiaku, Water absorption and enzymatic degradation of poly(lactic acid)/rice starch composites, Polymer Degradation and Stability, vol.90, issue.3, pp.488-500, 1959.
DOI : 10.1016/j.polymdegradstab.2005.04.006

G. Youssef, Couplage diffusion d'humidité / contraintes internes dans les matériaux composites, p.133, 2009.

T. Yuanjian and D. Isaac, Impact and fatigue behaviour of hemp fibre composites, Composites Science and Technology, vol.67, issue.15-16, 1957.
DOI : 10.1016/j.compscitech.2007.03.039

J. Zhang, K. Tashiro, H. Tsuji, and A. J. Domb, -lactide) Investigated by Simultaneous Measurements of WAXD and DSC, Macromolecules, vol.41, issue.4, pp.1352-1357, 2008.
DOI : 10.1021/ma0706071
URL : https://hal.archives-ouvertes.fr/hal-01258459

X. Zhang, M. Espiritu, A. Bilyk, and L. Kurniawan, Morphological behaviour of poly(lactic acid) during hydrolytic degradation, Polymer Degradation and Stability, vol.93, issue.10, pp.1964-1970, 2008.
DOI : 10.1016/j.polymdegradstab.2008.06.007

Y. Zhao, H. Cheung, K. Lau, C. Xu, D. Zhao et al., Silkworm silk/poly(lactic acid) biocomposites: Dynamic mechanical, thermal and biodegradable properties, Polymer Degradation and Stability, vol.95, issue.10, pp.951978-1987, 2010.
DOI : 10.1016/j.polymdegradstab.2010.07.015

H. Zhou, Effects of Microcrystallinity on Physical Aging and Environmental Stress Cracking of PET, p.50, 2005.

P. Zinck, De la caractérisation micromécanique du vieillissement hydrothermique des interphases polyepoxyde -fibre de verre au comportement du composite unidirectionnel -Relations entre leséchellesleséchelles micro et macro, p.54, 1999.

E. Zini and M. Scandola, Green composites: An overview, Polymer Composites, vol.94, issue.277, pp.1905-1915, 2011.
DOI : 10.1002/pc.21224