G. Alfano and M. A. Crisfield, Finite element interface models for the delamination analysis of laminated composites: mechanical and computational issues, International Journal for Numerical Methods in Engineering, vol.26, issue.7, pp.1701-1736, 2001.
DOI : 10.1002/nme.93

M. F. Al-khalil, P. D. Soden, R. Kitching, and M. J. Hinton, The effects of radial stresses on the strength of thin-walled filament wound GRP composite pressure cylinders, International Journal of Mechanical Sciences, vol.38, issue.1, pp.97-120, 1995.
DOI : 10.1016/0020-7403(95)00027-U

F. A. Al-salehi, S. T. Al-hassani, and M. J. Et-hinton, An Experimental Investigation into the Strength of Angle Ply GRP Tubes under High Rate of Loading, Journal of Composite Materials, vol.23, issue.3, pp.288-305, 1989.
DOI : 10.1177/002199838902300306

O. Allix and P. Ladevèze, Interlaminar interface modelling for the prediction of delamination, Composite Structures, vol.22, issue.4, pp.235-242, 1992.
DOI : 10.1016/0263-8223(92)90060-P

A. S. Argon, Fracture of Composites, Treatise on Materials Science and Technology, vol.1, pp.79-114, 1972.
DOI : 10.1016/B978-0-12-341801-2.50007-2

A. Astm, Standard test method for measuring the curved beam strength of fibre reinforced polymer matrix composite, pp.6415-6421, 2006.

A. Astm, Standard test method for short-beam strength polymer matrix composite material and their laminate, pp.2344-2344, 2006.

J. Bertolini, Contribution à l'analyse expérimentale et théorique des ruptures de structures composites en post-flambement par décollement de raidisseur, Thèse de doctorat de l, 2008.

S. Blassiau, A. Thionnet, and A. R. Bunsell, Micromechanisms of load transfer in a unidirectional carbon fibre???reinforced epoxy composite due to fibre failures. Part 2: Influence of viscoelastic and plastic matrices on the mechanisms of load transfer, Composite Structures, vol.74, issue.3, pp.319-331, 2006.
DOI : 10.1016/j.compstruct.2005.04.029

URL : https://hal.archives-ouvertes.fr/hal-00130644

H. Blumberg, J. Kerger-kocsis, F. Hoecker, and K. Freidrich, Effect of fiber/matrice adhesion on off-axis mechanical response in carbonfiber/epoxy-resin composite, Composite Science and Technology, vol.54, pp.3-317, 1995.

J. C. Brewer and A. C. Lagace, Quadratic Stress Criterion for Initiation of Delamination, Journal of Composite Materials, vol.8, issue.12, pp.1141-1155, 1988.
DOI : 10.1177/002199838802201205

P. P. Camanho and C. G. Dávilla, Numerical Simulation of Mixed-Mode Progressive Delamination in Composite Materials, Journal of Composite Materials, vol.37, issue.16, pp.1415-1438, 2003.
DOI : 10.1177/0021998303034505

L. A. Carlsson, J. W. Gillepsie, and R. B. Pipes, On the Analysis and Design of the End Notched Flexure (ENF) Specimen for Mode II Testing, Journal of Composite Materials, vol.27, issue.679, pp.594-604, 1986.
DOI : 10.1177/002199838602000606

N. Carrère, T. Vandellos, and E. Martin, Multilevel analysis of delamination initiated near the edge of composite structures, Proceedings of the 17 th International Conference on Composite Materials (ICCM17) Edimburgh (Royaume-Uni), pp.27-31, 2009.

N. Carrère, F. Laurin, and J. Maire, Micromechanical based hybrid mesoscopic 3D approach for nonlinear progressive failure analysis of composite structures, Composite Science and Technologies, 2007.

N. Carrère, F. Laurin, and J. Maire, Micromechanical based hybrid mesoscopic 3D approach for nonlinear progressive failure analysis of composite structures ? Part B: Comparison with experimental data, Composite Science and Technologies, 2011.

F. Chang and G. S. Springer, The Strengths of Fiber Reinforced Composite Bends, Journal of Composite Materials, vol.3, issue.1, pp.30-45, 1986.
DOI : 10.1177/002199838602000103

F. K. Chang and K. Y. Chang, A Progressive Damage Model for Laminated Composites Containing Stress Concentrations, Journal of Composite Materials, vol.21, issue.9, pp.834-855, 1987.
DOI : 10.1177/002199838702100904

R. M. Christensen and S. J. Deteresa, Delamination Failure Investigation for Out-of-plane Loading in Laminates, Journal of Composite Materials, vol.38, issue.24, pp.2231-2245, 2004.
DOI : 10.1177/0021998304046431

J. Cognard, P. Davies, L. Sohier, and R. Créac-'hcadec, A study of the non-linear behaviour of adhesively-bonded composite assemblies, Composite Structures, vol.76, issue.1-2, pp.34-46, 2006.
DOI : 10.1016/j.compstruct.2006.06.006

URL : https://hal.archives-ouvertes.fr/hal-00493242

R. G. Cuntze and A. Freund, The predictive capability of failure mode concept-based strength criteria for multi-directional laminates", Failure Criteria in Fibre Reinforced Polymer Composite, pp.429-489, 2004.

D. Diaz, A. Caron, and J. , Prediction of the onset of mode III delamination in carbon-epoxy laminates, Composite Structures, vol.72, issue.4, pp.438-445, 2006.
DOI : 10.1016/j.compstruct.2005.01.014

J. Devillers, D. Coutellier, and D. Delsart, Détermination des caractéristiques d'interfaces d'un composite verre / époxy au moyen de l'essai Arcan Détermination de la contrainte de cisaillement interlaminaire apparente-méthode par flexion sur appuis rapprochés, 1997.

G. J. Dvorak and N. Laws, Analysis of Progressive Matrix Cracking In Composite Laminates II. First Ply Failure, Journal of Composite Materials, vol.6, issue.4, pp.4-309, 1987.
DOI : 10.1177/002199838702100402

E. C. Edge, Does transverse and shear loading affect the compression strength of unidirectional CFC? A reply to Dr Hart-Smith, Composites, vol.25, issue.2, pp.159-161, 1994.
DOI : 10.1016/0010-4361(94)90010-8

N. Feld, Vers un pont micro-méso de la rupture en compression des composites stratifiés, Thèse de doctorat de l'Ecole Normale Supérieure de Cachan, 2011.

A. A. Griffith, The Phenomena of Rupture and Flow in Solids, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.221, issue.582-593, pp.163-198, 1921.
DOI : 10.1098/rsta.1921.0006

S. Guinard, O. Allix, D. Guédra-degeorges, and A. Vinet, A 3D damage analysis of low-velocity impacts on laminated composites, Composites Science and Technology, vol.62, issue.4, pp.585-589, 2002.
DOI : 10.1016/S0266-3538(01)00153-1

R. Gutkin, S. T. Pinho, P. Robinson, and P. T. Curtis, On the transition from shear-driven fibre compressive failure to fibre kinking in notched CFRP laminates under longitudinal compression, Composites Science and Technology, vol.70, issue.8, pp.1223-1231, 2010.
DOI : 10.1016/j.compscitech.2010.03.010

Z. Hashin, Failure Criteria for Unidirectional Fiber Composites, Journal of Applied Mechanics, vol.47, issue.2, pp.329-334, 1980.
DOI : 10.1115/1.3153664

M. J. Hinton and A. S. Kadour, Failure criteria for polymer composites under 3D stress states: the second Worldwide Failure Exercice (WWFE-II), Proceedings of the 17 th International Conference on Composite Materials (ICCM17) Edimburgh, pp.27-31

J. M. Hodgkinson, S. Ayache, and F. L. Mattews, In plane and Out-of-Plane property Measurement on Thick Woven Glass/Polyester Laminates, 1992.

C. Huchette, Analyse multiéchelle des interactions entre fissurations intralaminaire et interlaminaire dans les matériaux composites stratifiés, Thèse de doctorat de l'université de Paris VI, 2005.

U. Hütter, H. Schelling, and H. Krauss, An experimental study to determine failure envelope of composite materials with tubular specimen under combined loads and comparison between several classical criteria, Failure Modes of Composite Materials With Organic Matrices And Other Consequences On Design, pp.1-11, 1974.

G. R. Irwin, Fracture I, Handbuch der Physik VI, Flügge, pp.558-590, 1958.

O. Ishai and M. Gandeisman, Strengthening of Composite Materials in the Third Dimension Internal reports, Technion Research and Development Foundation Ltd, 1995.

J. W. Ifju and P. G. , Through-the-thickness tensile strength of textile composite, Composite materials: testing and design, pp.218-238, 1996.

P. M. Jelf and N. A. Fleck, Compression Failure Mechanisms in Unidirectional Composites, Journal of Composite Materials, vol.15, issue.1, pp.20706-2726, 1992.
DOI : 10.1177/002199839202601804

G. A. Kardomateas, BENDING OF A CYLINDRICALLY ORTHOTROPIC CURVED BEAM WITH LINEARLY DISTRIBUTED ELASTIC CONSTANTS, The Quarterly Journal of Mechanics and Applied Mathematics, vol.43, issue.1, pp.43-55, 1990.
DOI : 10.1093/qjmam/43.1.43

R. Y. Kim and S. R. Soni, Failure of composite laminates due to combined interlaminar normal and shear stresses, Proceedings of Japan-U.-S. CCM-III, pp.341-350, 1986.

R. Kitching, A. L. Tan, and T. M. Abu-mansur, The influence of through thickness properties on glass reinforced plastic laminated structures, Composite Structures, vol.2, issue.2, pp.105-115, 1984.
DOI : 10.1016/0263-8223(84)90024-2

R. Krueger, . Nasa, and . Icase, Virtual crack closure technique: History, approach, and applications, Applied Mechanics Reviews, vol.57, issue.2, pp.1-64, 2002.
DOI : 10.1115/1.1595677

P. A. Lagace and D. B. Weems, A Through-the-Thickness Strength Specimen for Composites, ASTM STP, No. 1003 American Society for Testing and Materials, Philadelphia, pp.197-207, 1989.
DOI : 10.1520/STP10027S

L. Lagunegrand, T. Lorriot, R. Harry, H. Wargnier, and J. Quenisset, Initiation of free-edge delamination in composite laminates, Composites Science and Technology, vol.66, issue.10, pp.1315-1327, 2006.
DOI : 10.1016/j.compscitech.2005.10.010

F. Laurin, Approche multiéchelle des mécanismes de ruines progressive des matériaux stratifiés et analyse de la tenue de structures composite, Thèse de doctorat de l'université de Franche-Comté, 2005.

F. Laurin, N. Carrère, and J. Maire, A multiscale progressive failure approach for composite laminates based on thermodynamical viscoelastic and damage models, Composites Part A: Applied Science and Manufacturing, vol.38, issue.1, pp.198-209, 2007.
DOI : 10.1016/j.compositesa.2006.01.018

F. Laurin, N. Carrère, and J. Maire, Strength analysis of composite structures subjected to 3D loadings, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00388008

F. Laurin, N. Carrère, and J. Maire, Proposition of an alternative multiscale progressive failure approach for plain coupons, 2009.

F. Laurin, N. Carrère, D. Lévêque, J. Maire, A. Mavel et al., Proposition of an alternative 3D strength analysis method for L-angle specimens subjected to triaxial loadings, 2009.

F. Laurin, N. Carrere, C. Huchette, and J. Maire, A multiscale hybrid damage and failure approach for strength predictions of composite structures, Composites Science and Technology, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00745629

F. Laurin, J. Charrier, D. Lévêque, P. Nunez, and A. Mavel, Strength WP1.1.1.2: Complementary 3D test campaign on L-angle composite specimens, 2011.

F. Laurin, J. Charrier, D. Lévêque, and A. Mavel, Analysis of the complementary 3D test campaign on L-angle composite specimens, 2011.

F. Lecuyer, Etude des effets de bords dans les structure minces multicouchess, Thèse de doctorat de l'université de Paris VI, 1991.

S. G. Lekhnitskii, Theory of Elasticity an Anistropic Elastic Body, 1968.

J. Lemaitre and J. Et-chaboche, Mécanique des matériaux solides, 1985.

F. H. Leroy, Rupture des composites unidirectionnels à fibres de carbone et matrice thermodurcissables : approche micro-macro " Thèse de doctorat de l'université de Bordeaux I, 1997.

D. Levêque, A. Mavel, C. Petitpas, J. Maire, and A. Schieffer, Prévision de la durée de vie et performances résiduelles des composites carbone/résine, 2000.

T. J. Lu and Z. C. Xia, Delamination of beams under transverse shear and bending, Materials Science and Engineering: A, vol.188, issue.1-2, pp.103-112, 1994.
DOI : 10.1016/0921-5093(94)90361-1

G. Lubineau and P. Ladevèze, Construction of a micromechanics-based intralaminar mesomodel, and illustrations in ABAQUS/Standard, Computational Materials Science, vol.43, issue.1, pp.137-145, 2008.
DOI : 10.1016/j.commatsci.2007.07.050

J. Maire, Etude théorique et expérimentale du comportement de matériaux composites en contraintes planes, Thèse de l'université de Franche-Comté, 1992.

J. F. Maire, O. Lesné, and C. Petipas, Une nouvelle approche de la modélisation du comportement visqueux des composites organiques, 10ème Journées Nationales des Composites (JNC14), p.748, 1996.

J. Maire and J. Chaboche, A new formulation of continuum damage mechanics (CDM) for composite materials, Aerospace Science and Technology, vol.1, issue.4, pp.247-257, 1997.
DOI : 10.1016/S1270-9638(97)90035-3

S. Mespoulet, Through-thickness test methods for laminated composite materials, Thèse de doctorat, 1998.

T. K. O-'brien-82-]-o-'brien, Characterization of delamination onset and growth in a composite laminate, ASTM, pp.775-140, 1982.

G. Odegard and M. Kumosa, Determination of shear strength of unidirectional composite materials with the Iosipescu and 10?? off-axis shear tests, Composites Science and Technology, vol.60, issue.16, pp.2917-2943, 2000.
DOI : 10.1016/S0266-3538(00)00141-X

R. Olsson, A survey of test methods for multiaxial and out-of-plane strength of composite laminates, Composites Science and Technology, vol.71, issue.6, pp.773-783, 2011.
DOI : 10.1016/j.compscitech.2011.01.022

URL : https://hal.archives-ouvertes.fr/hal-00736295

N. J. Pagano, Free edge stress fields in composite laminates, International Journal of Solids and Structures, vol.14, issue.5, pp.401-406, 1978.
DOI : 10.1016/0020-7683(78)90021-5

D. Perreux and D. Ovtana, Continuum damage mechanics for microcracked composites, Composites Engineering, vol.3, issue.2, pp.115-122, 1993.
DOI : 10.1016/0961-9526(93)90036-J

C. Petipas, Analyse et prévision du comportement à long terme des composites fibres de carbone / matrice organique, Thèse de doctorat de l'Université de Franche-Comté, 2000.

F. Pierron, S. Zhavoronokb, and M. Grediac, Identification of the through-thickness properties of thick laminated tubes using the virtual fields method, International Journal of Solids and Structures, vol.37, issue.32, pp.4437-4453, 2000.
DOI : 10.1016/S0020-7683(99)00149-3

S. T. Pinho, L. Iannucci, and P. Robinson, Physically-based failure models and criteria for laminated fibre-reinforced composites with emphasis on fibre kinking: Part I: Development, Composites Part A: Applied Science and Manufacturing, vol.37, issue.1, pp.63-73, 2006.
DOI : 10.1016/j.compositesa.2005.04.016

D. Post, F. L. Dai, Y. Guo, and P. Ifju, Interlaminar Shear Moduli of Cross-Ply Laminates: An Experimental Analysis, Journal of Composite Materials, vol.23, issue.3, pp.264-279, 1989.
DOI : 10.1177/002199838902300304

H. Schurmann, Failure analysis of FRP laminates by means of physically based phenomenological models, Composites Science and Technology, vol.58, issue.7, pp.1045-1067, 1998.

A. Puck and H. Schurmann, Failure analysis of FRP laminates by means of physically based phenomenological models, Composites Science and Technology, vol.62, pp.12-13, 2002.

M. Renault, Compression après impact d'une plaque stratifiée : étude expérimentale et modélisation éléments finis associeé, Thèse de doctorat de l'Ecole Centrale de Nantes, 1994.

Y. Rollet, Vers une maîtrise des incertitudes en calcul de structures composites, Thèse de doctorat de l'école Polytechnique, 2006.

B. W. Rosen, Mechanics of composite strengthening, Fiber Composite Materials Papers Presented at a Seminar of the American Society for Metals, pp.37-75, 1964.

G. C. Sih, Failure mechanics of composites, Handbook of composites, 1950.

P. D. Soden, A. S. Kaddour, and M. J. Hinton, Recommendations for designers and researchers resulting from the world-wide failure exercise, Composites Science and Technology, vol.64, issue.3-4, pp.589-604, 2004.
DOI : 10.1016/S0266-3538(03)00228-8

S. W. Tsai and E. M. Wu, A General Theory of Strength for Anisotropic Materials, Journal of Composite Materials, vol.5, issue.1, pp.58-79, 1971.
DOI : 10.1177/002199837100500106

V. Tvergaard, Fibre debonding and breakage in a whisker-reinforced metal, Materials Science and Engineering: A, vol.190, issue.1-2, pp.215-222, 1995.
DOI : 10.1016/0921-5093(95)80005-0

J. M. Withney and R. J. Nuismer, Stress Fracture Criteria for Laminated Composites Containing Stress Concentrations, Journal of Composite Materials, vol.221, issue.3, pp.253-265, 1974.
DOI : 10.1177/002199837400800303

G. Wimmer, C. Schuecker, and H. E. Pettermann, Numerical simulation of delamination in laminated composite components ??? A combination of a strength criterion and fracture mechanics, Composites Part B: Engineering, vol.40, issue.2, pp.158-165, 2009.
DOI : 10.1016/j.compositesb.2008.10.006

M. R. Wisnom, Analysis of Shear Instability in Compression Due to Fibre Waviness, Journal of Reinforced Plastics and Composites, vol.12, issue.11, pp.1171-1189, 1993.
DOI : 10.1177/073168449301201103

M. R. Wisnom and M. I. Jones, Size Effects in Interlaminar Tensile and Shear Strength of Unidirectional Glass Fibre/Epoxy, Journal of Reinforced Plastic and Composite, vol.15, pp.2-15, 1996.

P. Wright, A. Moffat, I. Sinclair, and S. M. Spearing, High resolution tomographic imaging and modelling of notch tip damage in a laminated composite, Composites Science and Technology, vol.70, issue.10, pp.1444-1452, 2010.
DOI : 10.1016/j.compscitech.2010.04.012

URL : https://hal.archives-ouvertes.fr/hal-00657647

S. E. Yamada and C. T. Sun, Analysis of Laminate Strength and Its Distribution, Journal of Composite Materials, vol.5, issue.3, pp.275-284, 1978.
DOI : 10.1177/002199837801200305

Z. Zou, S. R. Reid, S. Li, and P. D. Soden, Application of a delamination model to laminated composite structures, Composite Structures, vol.56, issue.4, pp.375-389, 2002.
DOI : 10.1016/S0263-8223(02)00021-1