G. Asch, Les capteurs en instrumentation industrielle, 2010.

B. De and N. , Calibration and Measurement Capabilities Length (Cylindrical straightness standard) Retrieved, 2013.

K. P. Birch, Optical fringe subdivision with nanometric accuracy, Precision Engineering, vol.12, issue.4, pp.195-198, 1990.
DOI : 10.1016/0141-6359(90)90060-C

C. Bonzom and E. Fargier, Erreurs de forme, de position, d'orientation, de battement. Partie 1, pp.1-6, 2013.

P. Bouchareine, Métrologie des surfaces, pp.390-391, 2013.

J. B. Bryan, Design and construction of an ultraprecision 84 inch diamond turning machine, Precision Engineering, vol.1, issue.1, pp.13-1710, 1979.
DOI : 10.1016/0141-6359(79)90071-0

J. B. Bryan and D. L. Carter, Design of a new error-corrected co-ordinate measuring machine, Precision Engineering, vol.1, issue.3, pp.125-128, 1979.
DOI : 10.1016/0141-6359(79)90036-9

J. Charron, Mesures sans contact Méthodes magnétiques et capacitives, pp.331-332, 2003.

T. Coorevits and J. David, Les limites de la correction par logiciel des erreurs de géométrie des M.M.T. Définition d'une architecture nouvelle de machine, 6ème congrès International de Métrologie. MFQ. Lille, 1993.

T. Coorevits, J. David, and P. Bourdet, Elimination of Geometrical Errors by Permutations ??? Application to a Rotary Table, CIRP Annals - Manufacturing Technology, vol.40, issue.1, pp.531-534, 1991.
DOI : 10.1016/S0007-8506(07)62047-2

R. S. Dadson, S. L. Lewis, and G. N. Peggs, The Pressure Balance, Theory and Practice, 1982.

J. David, machine for measuring by coordinates, Brevet N°5, p.12587, 1991.

R. R. Donaldson, A Simple Method for Separating Spindle Error from Test Ball Roundness Error, Annals of the CIRP, vol.21, issue.1, pp.125-126, 1972.

R. R. Donaldson and S. R. Patterson, Design and construction of a large, vertical axis diamond turning machine, SPIE'S 27th Annual International Technical Symposium and Instrument Display, 1983.

M. J. Downs and J. W. Nunn, Verification of the sub-nanometric capability of an NPL differential plane mirror interferometer with a capacitance probe, Measurement Science and Technology, vol.9, issue.9, pp.1437-1440, 1998.
DOI : 10.1088/0957-0233/9/9/010

J. D. Ellis, M. Baas, K. Joo, and J. W. Spronck, Theoretical analysis of errors in correction algorithms for periodic nonlinearity in displacement measuring interferometers, Precision Engineering, vol.36, issue.2, pp.261-269, 2012.
DOI : 10.1016/j.precisioneng.2011.10.008

W. T. Estler, C. J. Evans, and L. Z. Shaot, Uncertainty estimation for multiposition form error metrology, Computer Standards & Interfaces, vol.21, issue.2, pp.72-82, 1997.
DOI : 10.1016/S0920-5489(99)92238-9

. Fogale, Système de mesure capacitive MC900, 2012.

. Franke, Roulements sur joncs , Guidages linéaires, 2009.

E. Gleason and H. Schwenke, A Spindleless Instrument for the Roundness Measurement of Precision Spheres, Precision Engineering, vol.22, issue.1, pp.37-42, 1998.
DOI : 10.1016/S0141-6359(97)00089-5

G. Goch, Gear Metrology, CIRP Annals - Manufacturing Technology, vol.52, issue.2, 2003.
DOI : 10.1016/S0007-8506(07)60209-1

H. Haitjema, P. H. Schellekens, and S. F. Wetzels, Calibration of displacement sensors up to 300 µm with nanometer accuracy and direct traceability to a primary standard of length.pdf. Metrologia, pp.25-33, 2000.

R. Henselmans, L. A. Cacace, G. F. Kramer, P. C. Rosielle, and M. Steinbuch, The NANOMEFOS non-contact measurement machine for freeform optics, Precision Engineering, vol.35, issue.4, pp.607-624, 2011.
DOI : 10.1016/j.precisioneng.2011.04.004

S. Jeon, H. Ahn, D. Han, and I. Chang, New design of cylindrical capacitive sensor for on-line precision control of AMB spindle, IEEE Transactions on Instrumentation and Measurement, vol.50, issue.3, pp.757-763, 2001.
DOI : 10.1109/19.930450

O. Jusko, Taktile und punktförmig optische Formmesstechnik in Forschungsprojekten. présentation PTB, 2010.

O. Jusko, M. Neugebauer, H. Reimann, W. Sabuga, and T. Priruenrom, Dimensional calibration techniques for pressure balances to be used in the determination of the boltzmann constant, 1st International Congress on mechanical Metrology. Rio de Janeiro, 2008.

. Kosaka, Site constructeur Kosaka, 2013.

L. Lahousse, Contribution à la construction de machines de grande précision géométrique: le concept d'information dans l'amélioration des performances des machines, Thèse de doctorat Ecole Nationale Supérieure des Arts et Métiers, 2005.

L. Lahousse, J. David, and G. Vailleau, Application of a new architecture design with a nanometric resolution, pp.35-43, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00941291

S. Lanyi, Analysis of linearity errors of inverse capacitance position sensors, Measurement Science and Technology, vol.9, issue.10, pp.1757-1764, 1998.
DOI : 10.1088/0957-0233/9/10/016

R. Leach, Fundamental Principles of Engineering Nanometrology, 2009.

J. C. Lee, Y. J. Noh, Y. Arai, W. Gao, and C. H. Park, Precision Measurement of Cylinder Surface Profile on an Ultra-Precision Machine Tool, Measurement Science Review, vol.9, issue.2, pp.49-52, 2009.
DOI : 10.2478/v10048-009-0008-4

J. C. Legras, Étalons de pression, p.30, 2003.

S. Leleu, Contribution à l'évaluation des angles Conception, réalisation et validation d'un plateau pivotant de trés haute précision: vers une nouvelle référence angulaire nationale, Thèse de doctorat Arts et Métiers ParisTech, 2000.

. Lion-precision, Capacitive sensors (C9.5 S) Documentation technique constructeur, 2012.

J. Lipa and G. J. Siddall, High precision measurement of gyro rotor sphericity, Precision Engineering, vol.2, issue.3, pp.123-128, 1980.
DOI : 10.1016/0141-6359(80)90026-4

E. Loewen, C. J. Evans, R. J. Hocken, and W. T. Estler, Self-Calibration : Reversal, Redundancy, Error Separation, and " Absolute Testing, Annals of the CIRP, vol.45, issue.2, pp.617-634, 1996.

. Mahr, Site constructeur Mahr, 2013.

E. R. Marsh, D. Arneson, and D. L. Martin, A comparison of reversal and multiprobe error separation, Precision Engineering, vol.34, issue.1, 2010.
DOI : 10.1016/j.precisioneng.2009.03.001

A. D. Mazzeo, A. J. Stein, D. L. Trumper, and R. J. Hocken, Atomic force microscope for accurate dimensional metrology, Precision Engineering, vol.33, issue.2, pp.135-149, 2009.
DOI : 10.1016/j.precisioneng.2008.04.007

. Micro-epsilon, capaNCDT Mesure sans contact capacitif, 2012.

. Mitutoyo, Catalogue général Mitutoyo, 2013.

M. Neugebauer, F. Lüdicke, D. Bastam, H. Bosse, H. Reimann et al., A new comparator for measurement of diameter and form of cylinders, spheres and cubes under clean-room conditions, Measurement Science and Technology, vol.8, issue.8, pp.849-856, 1997.
DOI : 10.1088/0957-0233/8/8/003

H. Nouira, A. Vissiere, M. Damak, and J. David, Investigation of the influence of the main error sources on the capacitive displacement measurements with cylindrical artefacts, Precision Engineering, vol.37, issue.3, pp.721-737, 2013.
DOI : 10.1016/j.precisioneng.2013.02.005

H. Nouira, A. Vissière, G. Vailleau, M. Damak, and J. David, Evaluation of the capacitive displacement measurements in mechanical metrology with cylindrical artefacts, The 13th International Conference on Metrology and Properties of Engineering Surfaces, 2011.

S. Osawa, K. Busch, M. Franke, and H. Schwenke, Multiple orientation technique for the calibration of cylindrical workpieces on CMMs, Precision Engineering, vol.29, issue.1, 2005.
DOI : 10.1016/j.precisioneng.2004.04.006

B. Poyet, Conception d'un microscope à force atomique métrologique, Thèse de doctorat Université de Versailles Saint-Quentin en Yvelines, 2010.

T. Rabault, P. Wongthep, and D. Bentouati, Caractérisation métrologique d'une nouvelle référence de pression relative dans le domaine de 1.5 à 50 Mpa, 16th International Congress of Metrology, 2013.

. Renishaw, RLE10 fibre optic laser encoder, 2004.

W. Sabuga and T. Priruenrom, An approach to the evaluation of dimensional measurements on pressure-measuring piston-cylinder assemblies, 1st International Conference Cultivating metrological knowledge, 2007.

J. Seppä, V. Korpelainen, M. Merimaa, G. B. Picotto, and A. Lassila, A method for linearization of a laser interferometer down to the picometre level with a capacitive sensor, Measurement Science and Technology, vol.22, issue.9, pp.94027-94037, 2011.
DOI : 10.1088/0957-0233/22/9/094027

A. H. Slocum, Precision machine design, 1992.

P. T. Smith, Analysis and application of capacitive displacement sensors to curved surfaces, 2003.

S. T. Smith, Foundations of ultraprecision mechanism design, 1992.

T. Hobson, Site constructeur Taylor Hobson, 2013.

R. Thalmann and J. Spiller, A primary roundness measuring machine, Recent Developments in Traceable Dimensional Measurements III, pp.1-10, 2005.
DOI : 10.1117/12.618219

D. Thompson, The compuron: How round is round?, 1982.

F. Villar, Conception , réalisation et caractérisation de systèmes mécaniques pour l ' expérience française de « balance du watt, 2008.

A. Vissière, H. Nouira, M. Damak, J. David, and O. Gibaru, Experimental evaluation of the dissociated metrological technique (DMT) for the geometrical measurement in metrological applications, The 13th International Conference on Metrology and Properties of Engineering Surfaces, 2011.

A. Vissière, H. Nouira, M. Damak, J. David, G. Vailleau et al., Development of a new apparatus for cylindrical form measurement with nanometriclevel of accuracy, Macroscale: Recent Developments in Traceable Dimensional Measurements, 2011.

A. Vissière, H. Nouira, M. Damak, J. David, G. Vailleau et al., Development of a new apparatus for cylindrical form measurement with nanometriclevel of accuracy -methods that eliminate the spindle errors, Macroscale: Recent Developments in Traceable Dimensional Measurements, 2011.

A. Vissière, H. Nouira, M. Damak, O. Gibaru, and J. David, Concept and architecture of a new apparatus for cylindrical form measurement with a nanometric level of accuracy, Measurement Science and Technology, vol.23, issue.9, pp.10-1088, 2012.
DOI : 10.1088/0957-0233/23/9/094014

A. Vissière, H. Nouira, M. Damak, O. Gibaru, and J. David, A newly conceived cylinder measuring machine and methods that eliminate the spindle errors, Measurement Science and Technology, vol.23, issue.9, pp.10-1088, 2012.
DOI : 10.1088/0957-0233/23/9/094015

A. Vissière, H. Nouira, G. Vailleau, M. Damak, J. David et al., Evaluation of the capacitive displacement measurements in mechanical metrology with cylindrical artefacts, 11th euspen International Conference, 2011.

D. Whitehouse, Some theoretical aspects of error separation techniques in surface metrology, Journal of Physics E: Scientific Instruments, vol.9, issue.7, pp.531-536, 1976.
DOI : 10.1088/0022-3735/9/7/007

D. Whitehouse, Surfaces and their Measurement, 2002.

I. Widdershoven, R. Donker, and H. A. Spaan, Realization and calibration of the "Isara 400" ultra-precision CMM, The 13th International Conference on Metrology and Properties of Engineering Surfaces, pp.289-29310, 2011.
DOI : 10.1088/1742-6596/311/1/012002

X. Iso and /. Ts, Spécification géométrique des produits (GPS) Filtrage Partie 32: Filtres de profil robustes: Filtres splines AFNOR, pp.16610-16642, 2012.

S. Zhang and S. Kiyono, An absolute calibration method for displacement sensors, Measurement, vol.29, issue.1, pp.11-2010, 2001.
DOI : 10.1016/S0263-2241(00)00023-3

W. Q. Zhao, Z. Xue, J. B. Tan, and Z. B. Wang, SSEST: A new approach to higher accuracy cylindricity measuring instrument, International Journal of Machine Tools and Manufacture, vol.46, issue.14, pp.1869-1878, 2006.
DOI : 10.1016/j.ijmachtools.2005.11.006