B. R. Pearson-r, Role of particle cavitation in rubber-toughened epoxies: 1. Microvoid Toughening, Polymer, pp.4529-4538, 1996.

B. A. Brüscke-h, . H. Schneider-w, and . F. Tusel-g, Pervaporation membranes ? An economical method to replace conventional dehydration and rectification columns in ethanol distilleries, Proceedings of 5 th international alcohol fuel technology symposium, pp.97-106, 1982.

B. Z. , A. As, and W. M. Cohen-re, Toughness mechanism in semi-crystalline polymer blends: I. High-density polyethylene toughened with rubbers, Polymer, vol.40, pp.2331-2346, 1999.

B. F. Budtova-t, Cellulose ester-polyolefine binary blend: Morphological, rheological and mechanical properties, European Polymer Journal, vol.48, pp.981-989, 2012.

B. R. Gaymans-r, S. J. Ingen, and H. J. , Brittle-tough transition in nylonrubber blends: effect of rubber concentration and particle size, Polymer, vol.28, pp.1489-1496, 1987.

B. M. Loux-c, . Muller-r, and . Bouchet-g, Morphological study of two-phase polymer blends during compounding in a novel coumpounder on the basis of elongational flows, Journal of Applied Polymer Science, vol.119, pp.482-490, 2011.

B. M. Ait-kadi and F. J. , Determination of shear rate and viscosity from batch mixer data, Journal of Rheology, vol.43, pp.415-433, 1999.

B. R. Jr, . M. Schulken-r, and T. J. Jr, Crystallinity in secondary cellulose esters, Journal of applied polymer science, vol.11, pp.2456-2465, 1967.

B. C. and G. R. Komarek-r, Aerobic biodegradation of cellulose acetate, Journal of Applied Polymer Science, vol.47, pp.1709-1719, 1993.

C. L. Beaume-f and . Leibler-l, Crystalline Organization and Toughening : Example of PA-12, Polymer, vol.46, pp.2748-2757, 2005.

C. L. Leibler-l, Analysis of polymer blend morphologies from transmission electron micrographs, Polymer, pp.6360-6368, 2005.

C. W. Merz-e, Correlation of dynamic and steady flow viscosities, Journal of Polymer Science, vol.28, pp.61-622, 1958.

D. S. and K. S. Mcmillan-r, Stable queous dispersions of cellulose esters and their use in coatings, p.46259, 2000.

D. D. Groeninckx-g, . Isogawa-m, . Hasegawa-t, and . Kadokura-m, Cavitation vs Debonding during deformation of rubber-modified PVC, Polymer, pp.437-441, 1995.

E. Eastman, Cellulose-based speciality polymers, accès en ligne le 01, 2009.

E. K. Buchanan-c, Advances in cellulose ester performance and application, Progress in Polymer Science, vol.26, pp.1605-1688, 2001.

E. J. Van-der and . A. Vegt, A study on polymer blending micro-rheology -Part IV: The influence of coalescence on blend morphology origination, Polymer Engineering and Science, vol.26, pp.1332-1338, 1986.

E. B. Navard-p, Band textures in mesomorphic hydroxypropylcellulose solutions, Macromolecules, vol.22, pp.1419-1422, 1989.

F. B. Therrien-d, Factors influencing structure formation and phase size in an immiscible polymer blend of PC/PP prepared by twin-screw extrusion, Polymer, vol.32, pp.1474-1481, 1991.

F. C. Schirrer-r, Renforcement des polymères ? Mécanismes et modélisations de la cavitation, GFP : Initiation à la science des polymères Physique des Polymères à l'état solide, pp.167-246, 2006.

R. W. Flumerfelt, Drop Breakup in Simple Shear Fields of Viscoleastic Fluids, Industrial & Engineering Chemistry Fundamentals, vol.11, issue.3, pp.312-318, 1972.
DOI : 10.1021/i160043a005

G. S. Schirrer-r, Multiple light scattering and cavitation in two phase tough polymers, Journal of Polymer Science Part B, vol.37, pp.113-126, 1999.

G. T. Budtova-t, Morphology and molten-state rheology of polylactide and polyhydroxyalkanoate blends, European Polymer Journal, vol.48, pp.1110-1117, 2012.

G. W. Mccartney-b and . Samaranayake-g, Cellulose derivatives with a low degree of substitution: The biodegradability of cellulose esters using a simple enzyme assay, Biotechnology Progress, vol.10, pp.214-219, 1994.

G. W. Samaranayake-g, . Dumay-m, and . Davé-v, Novel cellulose derivatives. III. Thermal analysis of mixed esters with butyric and hexanoic acid, Journal of Polymer Science Part. B: Polymer Physics, vol.33, pp.2045-2054, 1995.

G. D. Muller-r and P. J. , Linear viscoelastic behavior of some incompatible polymer blends in the melt. Interpretation of data with a model of emulsion of viscoelastic liquids, Macromolecules, vol.26, pp.320-329, 1993.

G. S. Simeone-m, . And, and . Greco-f, Effects of matrix viscoelasticity on drop deformation in dilute polymer blends under slow shear flow, Polymer, vol.44, pp.467-471, 2003.

J. P. Kokta-b and R. B. , Fibrous long-chain organic acid cellulose esters and their characterization by diffuse reflectance FTIR spectroscopy, solid-state CP/MAS 13C-NMR, and X-ray diffraction, Journal of Applied Polymer Science, vol.78, pp.1354-1365, 2000.

J. P. and R. B. Kokta-b, Thermal degradation behavior of cellulose fibers partially esterified with some long chain organic acids, Polymer Degradation and Stability, vol.70, pp.387-394, 2000.

K. C. Van-duin-m and J. R. Pagnoulle-c, Strategies for compatibilization of polymer blends, Progress in Polymer Science, pp.707-757, 1998.

K. P. Kawano-y and P. D. Fantini-m, Structure and properties of maleated linear lowdensity Polyethylene and Cellulose Acetate Butyrate blends, Macromolecular Materials and Engineering, vol.291, pp.531-539, 2006.

K. P. Kawano-y, P. H. Fantini-m, and P. D. , Structure and properties of composites of Polyethylene of maleated Polyethylene and Cellulose or Cellulose Esters, Journal of Applied Polymer Science, vol.103, pp.402-411, 2007.

L. P. Longdon-a and . G. Willins-g, Solvent cast cellulose diacetate film, Macromolecular Symposia, pp.293-322, 2004.

L. W. Sirivat-a and . G. Larson-r, Influence of elasticity on dispersed-phase droplet size in immiscible polymer blends in simple shearing flow, Polymer Engineering and Science, vol.42, pp.798-809, 2002.

L. L. Macosko-c and . D. Pearson-s, Influence of Normal Stress Difference on Polymer Drop Deformation, Polymer Engineering and Science, vol.36, pp.1647-1655, 1996.

L. S. Sourirajan-s, Sea Water Demineralization by Means of an Osmotic Membrane, Saline Water Conversion?II, Chap, pp.117-132, 1963.

L. A. Champagne-m and . A. Utracki-l, Interfacial tension coefficient from the retraction of ellipsoidal drops, Journal of Polymer Science Part B: Polymer Physics, vol.35, pp.1393-1403, 1997.

M. C. Guégan-p and K. A. , Compatibilizers for melt blending: Premade block copolymers, Macromolecules, vol.29, pp.5590-5598, 1996.

M. C. Tanghe-l and L. B. , Preparation of Cellulose Acetate ? Action of sulfuric acid, Industrial and Engineering Chemistry, vol.38, pp.77-82, 1946.

M. C. , M. J. , and K. D. Hiatt-g, Aliphatic Acid Esters of Cellulose ? Properties, Industrial and Engineering Chemistry, vol.43, pp.688-691, 1951.

M. C. Hiatt-g, Cellulose & Cellulose Derivatives ? Part II: IX.C. Organic Esters, High Polymers, pp.763-824, 1954.

M. A. Wu-s, Percolation model for brittle-tough transition in nylon/rubber blends, Polymer, pp.2170-2173, 1988.

M. W. Jr and . M. Spurlin-h, Residual stresses and strains in molded plastics, Journal of Colloid Science, vol.7, pp.244-252, 1952.

M. F. Carreau-p and A. A. , Influence of elastic properties on drop deformation and breakup in shear flow, Journal of Rheology, vol.42, pp.1477-1490, 1998.

M. F. Huneault-m, Dispersion visualization of model fluids in a transparent Couette flow cell, Journal of Rheology, vol.45, pp.783-797, 2001.

M. W. Leal and L. G. , Deformation and breakup of viscoelastic drops in planar extension flows, Journal of Non-Newtonian Fluid Mechanics, vol.40, pp.335-379, 1991.

M. A. Wibowo-a, . Misra-m, and . T. Drzal-l, Development of renewable resource-based cellulose acetate bioplastics: effect of process engineering on the performance of cellulosic plastics, Polymer Engineering and science, vol.43, pp.1151-1161, 2003.

M. T. Norimoto-m, . Yamada-t, and . Shiraishi-n, Viscoelastic properties of cellulose acylates, pp.61-70, 1983.

M. O. , A. A. Cohen-r, and . Weinberg-m, Toughening mechanism of rubbermodified polyamides, Polymer, vol.36, pp.951-930, 1995.

N. Y. Matsuda-k, M. Y. Kimura-n, and . Suzuki-h, Blends of poly(?-caprolactone) with cellulose alkyl esters: effect of the alkyl side-chain length and degree of substitution on miscibility, Cellulose, pp.131-145, 1997.

O. A. Dijkstra-k, . A. Van-der-wal, and . J. Gaymans-r, Polyamide-Rubber blends:influence of very small rubber particle sizes on impact strength, 6th Annual Conference of Polymer Processing Society, 1990.

O. E. Spurlin-h and . W. Grafflin-m, Cellulose & Cellulose Derivatives ? Part III: XI.A. Mechanical properties of cellulose and its derivatives, High Polymers: Volume V, Interscience, pp.1247-1354, 1955.

P. A. and D. S. Andrews-r, The interface in binary mixtures of polymers containing a corresponding block copolymer: effects of industrial mixing processes and coalescence, Polymer Engineering and Science, vol.30, pp.741-752, 1990.

P. H. Bastian-m, S. M. Gehring-a, and . Pötschke-p, Experimental investigation of the morphology development of polyblends in corotating twin-screw extruders, Journal of Applied Polymer Science, vol.76, pp.708-721, 2000.

S. G. Glasser-w, Cellulose derivatives with low DS, II: Analysis of alcanoates, Carbohydrate Polymers, pp.79-86, 1993.

S. H. Murayama-m and . Shimamoto-s, Properties and applications of cellulose triacetate film, Macromolecular Symposia, pp.323-333, 2004.

S. C. Macosko-c, Morphology development during the initial stages of polymerpolymer blends, Polymer, vol.36, pp.461-470, 1995.

S. G. and J. J. Dawans-f, Morphology-Processing relationships in Polyethylene-Polyamide blends, Polymer Engineering and Science, vol.30, pp.553-565, 1990.

S. L. Haufe-j and P. M. , Product Overview and Market Projection of emerging bio-based plastics, 2009.

S. J. , M. H. Koch-r, and . Müller-v, Thermoplastic and biodegradable polymers of cellulose, Polymer Degradation and Stability, vol.59, pp.107-115, 1998.

S. U. Macosko-c, R. R. , and C. H. , Morphology development in polymer blends, Polymer Engineering and Science, vol.32, pp.1814-1823, 1992.

S. U. Macosko-c, Drop breakup and coalescence in polymer blends: the effects of concentration and compatibilization, Macromolecules, vol.28, pp.2647-2657, 1995.

S. S. , R. V. Fenton-j, S. R. Kunz-h, and . A. Weiss-r, Polymer blends based on sulfonated poly(ether ketone ketone) and poly(ether sulfone) as proton exchange membranes for fuel cells, Journal of Membrane Science, vol.26, pp.122-133, 2005.

T. D. Leal-l, Deformation and relaxation of Newtonian drops in planar extensional flows of a Boger fluid, Journal of Non-Newtonian Fluid Mechanics, vol.99, pp.81-108, 2001.

V. Der and S. M. Meijer-h, Ultimate toughness of amorphous polymers, Macromolecular Symposia, pp.115-125, 1993.

V. H. Langelaan-h, J. Van-dam, and P. A. De, Blends of a thermotropic LCP and a thermoplastic elastomer: 1.Mechanical properties and morphology, Polymer Engineering and Science, vol.33, pp.754-763, 1993.

V. B. , D. Valle-g, and . Delamare-l, A global computer software for polymer flows in corotationg twin screw extruders, Polymer Engineering & Science, vol.38, pp.1781-1792, 1998.

W. T. Cheng-g, M. S. Cai-z, and . Zhang-l, Crystallization behaviour, mechanical properties and environmental biodegradability of Poly-b-hydroxybutyrate)/Cellulose Acetate Butyrate blends, Journal of Applied Polymer Science, vol.89, pp.2116-2122, 2003.

W. A. Buchanan-c and W. G. Pearcy-b, Mechanical properties of Cellulose Acetate Propionate / Aliphatic polyester blends, Journal of Applied Polymer Science, vol.52, pp.525-550, 1994.

W. M. Landel-r and . D. Ferry-j, The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids, Journal of American Chemical Society, vol.77, pp.3701-3707, 1955.

X. P. Bousmina-m and . Rodrigue-d, Critical Experimental Comparison between Five Techniques for the Determination of Interfacial Tension in Polymer Blends: Model System of Polystyrene/Polyamide-6, Macromolecules, vol.33, pp.8020-8034, 2000.

Y. M. , L. S. Edeerozey-abd-manaf, and . Tsuji-m, Modification of orientation birefringence of cellulose ester by addition of poly(lactic acid), European Polymer Journal, vol.46, pp.2262-2274, 2010.

Y. K. and A. R. Cohen-r, Shear flow properties of concentrated solutions of linear and star-branched polystyrene, Rheologica Acta, vol.20, pp.163-178, 1981.

Y. A. Pearson-r, Toughening mechanisms in elastomer-modified epoxies

Z. Q. Zhang-l, W. B. Zhang-m, and W. S. , Miscibility, free volume behavior and properties of blends from cellulose acetate and castor oil-based polyurethane, Polymer, vol.44, pp.1733-1739, 2003.