Nonlinear analysis of residual stresses in a rail manufacturing process by FEM, Applied Mathematical Modelling, vol.33, issue.1, pp.34-53, 2009. ,
DOI : 10.1016/j.apm.2007.10.015
Contribution à l'étalonnage d'une machine à mesurer de très haute précision :mesures de rectitude et de planéité à un niveau d'incertitudes nanométriques, 2010. ,
«Verification of form tolerances Parts 1: Basic issues, flatness and straightness,» Precision Engineering, pp.131-143, 1995. ,
Métrologie des angles, Extraits de la machine moderne, Publié en polycopié par l'Ecole Libre d'Apprentissage de Grenoble, de juin 1953 à septembre, 1954. ,
Mesure des défauts d'une règle-étalon, Extraits de "Manipulation de Métrologie mécanique, Publié en polycopié par l'Ecole Libre d'Apprentissage de Grenoble, 1956. ,
Straightness and flatness tolerance evaluation: an optimization approach, Precision Engineering, vol.18, issue.1, pp.30-37, 1996. ,
DOI : 10.1016/0141-6359(95)00033-X
Correction par logiciel des défauts de géométrie d'une machine à mesurer, ENSAM Lille, Rapport Interne SERAM, p.11339, 1983. ,
Vailleau, «Micro et nano précision : positionnement de haute et très haute qualité géométrique,» quatrièmes journées nationales de recherche en robotique, pp.89-94, 2003. ,
«Sur l'évaluation des défauts de forme à partir de mesures tridimentionnelles, Journal of Mechanical and Environmental Engineering, vol.43, pp.13-21, 1998. ,
«Machine for straightening and stress-relieving steel rails», 1988. ,
Mennel, «Universal finishing stand for the universal rolling of rails and the like, and method of utilizing same», pp.554-574, 1990. ,
An algorithm for form error evaluation ??? using the theory of discrete and linear Chebyshev approximation, Computer Methods in Applied Mechanics and Engineering, vol.92, issue.3, pp.309-324, 1991. ,
DOI : 10.1016/0045-7825(91)90019-3
Bending of work-hardening metals under the influence of axial load, Journal of Mechanical Working Technology, vol.10, issue.1, pp.57-66, 1984. ,
DOI : 10.1016/0378-3804(84)90078-0
Self-Calibration: Reversal, Redundancy, Error Separation, and ???Absolute Testing???, CIRP Annals - Manufacturing Technology, vol.45, issue.2, pp.617-634, 1996. ,
DOI : 10.1016/S0007-8506(07)60515-0
Precision measurement of cylinder straightness using a scanning multi-probe system, Precision Engineering, vol.26, issue.3, pp.279-288, 2002. ,
DOI : 10.1016/S0141-6359(02)00106-X
Cambering structural steel I-girders using cold bending, Journal of Constructional Steel Research, vol.64, issue.4, pp.407-417, 2008. ,
DOI : 10.1016/j.jcsr.2007.10.001
ChangQiao, «Improvement on straightness of metal bar based on straightening stroke-deflection model, Science China Technological sciences, vol.52, pp.1866-1873, 2009. ,
A new minimum zone method for evaluating straightness errors, Precision Engineering, vol.15, issue.3, pp.158-165, 1993. ,
DOI : 10.1016/0141-6359(93)90003-S
«Method for straightening rolled metal sections», Neuilly sur Seine, 2008. ,
Influence of axial force on the elastic-plastic bending and springback of a beam, Journal of Mechanical Working Technology, vol.6, issue.1, pp.5-21, 1982. ,
Rail quality and maintenance for modern railway operation, p.71, 1993. ,
Application of several computing techniques for minimum zone straightness, Precision Engineering, vol.15, issue.4, pp.274-280, 1993. ,
DOI : 10.1016/0141-6359(93)90110-V
Synthesis of the multi-step straightness control system for shaft straightening processes, Mechatronics, vol.12, issue.1, pp.139-156, 2002. ,
DOI : 10.1016/S0957-4158(00)00066-0
Contribution à la contruction de machines de grande précision géométrique : le concept d'information dans l'amélioration des performances des machines, 2005. ,
«Application d'une nouvelle conception d'architecture à une machine de mesure de résolution nanométriqe,» Revue française de métrologie, 2005. ,
Vailleau et S. Ducourtieux, «Application d'une nouvelle conception d'harchitecture à une machine de mesure de résolution nanométrique, 2005. ,
Contribution à l'évaluation des angles, Conception, réalisation et validation d'un plateau pivotant de très haute précision : Vers une nouvelle référence angulaire nationale, 2000. ,
Minimum zone evaluation of surfaces, International Journal of Machine Tool Design and Research, vol.20, issue.2, pp.123-136, 1980. ,
DOI : 10.1016/0020-7357(80)90024-4
Determination of Best Objective Function for Evaluating Geometric Deviations, The International Journal of Advanced Manufacturing Technology, vol.15, issue.2, pp.90-95, 1999. ,
DOI : 10.1007/s001700050044
A Simplex Method for Function Minimization, The Computer Journal, vol.7, issue.4, pp.308-313, 1965. ,
DOI : 10.1093/comjnl/7.4.308
Norme Europénne NF-EN-ISO-14660-2-Spécification géométrique des produits (GPS) -Éléments géométriques -Partie 2 : ligne médiane extraite d'un cylindre et d'un cône, surface médiane extraite, 1999. ,
Lamant et M. Larrecq, «Comportement mécanique de la brame dans la zone de refroidissement secondaire d'une machine de coulée continue d'acier,» Commission des Communautés européennes, 1989. ,
Evaluation of straightness and flatness error using computational geometric techniques, Computer-Aided Design, vol.31, issue.13, pp.829-843, 1999. ,
DOI : 10.1016/S0010-4485(99)00071-8
Analytical Predictions of Plastic Deformations of Heated Steel, Journal of Structural Engineering, vol.114, issue.6, pp.1285-1302, 1988. ,
DOI : 10.1061/(ASCE)0733-9445(1988)114:6(1285)
Residual stress formation during the roller straightening of railway rails, International Journal of Mechanical Sciences, vol.43, issue.10, pp.2281-2295, 2001. ,
DOI : 10.1016/S0020-7403(01)00041-8
Vision system for gauging and Automatic straightening of steel bars, Machine vision and threedimentional imaging systems for inspection and metrology, 2000. ,
Analysis of end straightness of rail during manufacturing, International Journal of Mechanical Sciences, vol.47, issue.12, pp.1874-1884, 2005. ,
DOI : 10.1016/j.ijmecsci.2005.07.005
Mathematical model of rail straightening and experimental estimation of its adequacy, Journal of Materials Processing Technology, vol.40, issue.1-2, pp.213-218, 1994. ,
DOI : 10.1016/0924-0136(94)90487-1
«Some theorical aspects of error separation techniques in surface metrology, Journal of Physics E: Scientific Instruments, vol.9, 1976. ,
Residual stresses near a rail end, Theorical and Applied Fracture Mechanics, pp.29-37, 1990. ,
DOI : 10.1016/0167-8442(90)90013-P
Residual stresses and web fracture in roller-straightened rail, Thèse de doctorat Massachusetts Institute of Technology, 1991. ,
DOI : 10.1007/978-94-011-1787-6_1