V. S. Hollek, Surface and Coating Technology, pp.76-77, 1995.

A. Aubert, R. Gillet, A. Gaucher, and J. P. Perrat, Hard chrome coatings deposited by physical vapour deposition, Thin Solid Films, vol.108, issue.2, pp.165-172, 1983.
DOI : 10.1016/0040-6090(83)90501-1

S. Soderberg, M. Sjastrand, and B. Ljungberg, Advances in coating technology for metal cutting tools, Metal Powder Report, vol.56, issue.4, pp.24-30, 2001.
DOI : 10.1016/S0026-0657(01)80174-0

K. O. Legg and H. Graham, The replacement of electroplating, Surface and Coatings Technology, vol.81, issue.1, pp.99-105, 1996.
DOI : 10.1016/0257-8972(95)02653-3

J. Creus, H. Idrissi, H. Mazille, F. Sanchette, and P. Jacquot, Improvement of the corrosion resistance of CrN coated steel by an interlayer, Surface and Coatings Technology, vol.107, issue.2-3, pp.183-190, 1998.
DOI : 10.1016/S0257-8972(98)00646-X

H. Chen and F. Lu, Oxidation behavior of chromium nitride films, Thin Solid Films, vol.515, issue.4, pp.2179-2184, 2006.
DOI : 10.1016/j.tsf.2006.06.039

P. Hones, Structural and electronic properties of transition metal nitride with emphasis on chromium nitride based thin films, thèse de doctorat de l'EPFL de Lausanne, 2000.

J. S. Koehler, Attempt to Design a Strong Solid, Physical Review B, vol.2, issue.2, pp.547-551, 1970.
DOI : 10.1103/PhysRevB.2.547

C. Mendibide, J. Fontaine, P. Steyer, and C. Esnouf, Dry Sliding Wear Model of Nanometer Scale Multilayered TiN/CrN PVD Hard Coatings, Tribology Letters, vol.151, issue.152, pp.779-789, 2004.
DOI : 10.1007/s11249-004-8086-9
URL : https://hal.archives-ouvertes.fr/hal-00474959

M. Z. Huq, J. P. Celis, J. Meneve, L. Stals, and D. Schruvers, Oscillating sliding wear of mono- and multilayer ceramic coatings in air, Surface and Coatings Technology, vol.113, issue.3, pp.242-250, 1999.
DOI : 10.1016/S0257-8972(99)00009-2

. M. Zhou, R. Asaki, K. Higachi, S. W. Yamamoto, and R. , Sliding wear behavior of polycrystalline TiN/CrN multilayers against an alumina ball, Surface and Coatings Technology, vol.130, issue.1, pp.9-14, 2000.
DOI : 10.1016/S0257-8972(00)00674-5

W. Zhang and J. H. Hsieh, Tribological behavior of TiN and CrN coatings sliding against an epoxy molding compound, Surface and Coatings Technology, vol.130, issue.2-3, pp.240-247, 2000.
DOI : 10.1016/S0257-8972(00)00709-X

Y. Massianai, . Medjahed, J. P. Gravier, and . Croussier, Effect of a titanium underlayer on the corrosion behaviour of physically vapour deposited titanium nitride films, Thin Solid Films, vol.217, issue.1-2, pp.31-37, 1992.
DOI : 10.1016/0040-6090(92)90602-8

N. Fukumoto, H. Ezura, and T. Suzuki, Synthesis and oxidation resistance of TiAlSiN and multilayer TiAlSiN/CrAlN coating, Surface and Coatings Technology, vol.204, issue.6-7, pp.902-906, 2009.
DOI : 10.1016/j.surfcoat.2009.04.027

N. Fukumoto, H. Ezura, K. Yamamoto, A. Hotta, and T. Suzuki, Effects of bilayer thickness and post-deposition annealing on the mechanical and structural properties of (Ti,Cr,Al)N/(Al,Si)N multilayer coatings, Surface and Coatings Technology, vol.203, issue.10-11, pp.1343-1348, 2009.
DOI : 10.1016/j.surfcoat.2008.11.002

S. Veprek and M. J. Veprek-heijman, Industrial applications of superhard nanocomposite coatings, Surface and Coatings Technology, vol.202, issue.21, pp.5063-5073, 2008.
DOI : 10.1016/j.surfcoat.2008.05.038

C. Sandu, S. Harada, R. Sanjinés, and A. Cavaleiro, A unique approach to reveal the nanocomposite nc-MN/SiN-layer architecture of thin films via electrical measurements, Surface and Coatings Technology, vol.204, issue.12-13, pp.1907-1913, 2010.
DOI : 10.1016/j.surfcoat.2009.11.045

A. Thobor-keck, F. Lapostolle, A. Dehlinger, D. Pilloud, J. F. Pierson et al., Influence of silicon addition on the oxidation resistance of CrN coatings, Surface and Coatings Technology, vol.200, issue.1-4, pp.264-268, 2005.
DOI : 10.1016/j.surfcoat.2005.02.029

M. Benkahoul, P. Robin, L. Martinu, and J. Klemberg-sapieha, Tribological properties of duplex Cr???Si???N coatings on SS410 steel, Surface and Coatings Technology, vol.203, issue.8, pp.934-940, 2009.
DOI : 10.1016/j.surfcoat.2008.07.036

C. Sandu, N. Cusnir, D. Oezer, R. Sanjinés, and J. Patscheider, Influence of bias voltage on the microstructure and physical properties of magnetron sputtered Zr???Si???N nanocomposite thin films, Surface and Coatings Technology, vol.204, issue.6-7, pp.969-972, 2009.
DOI : 10.1016/j.surfcoat.2009.06.042

A. Pelisson, M. Parlinska-wojtan, H. Hug, and J. Patscheider, Microstructure and mechanical properties of Al???Si???N transparent hard coatings deposited by magnetron sputtering, Surface and Coatings Technology, vol.202, issue.4-7, pp.884-889, 2007.
DOI : 10.1016/j.surfcoat.2007.05.094

Y. Shen, Y. Lu, and Z. Liu, Microstructure evolution and grain growth of nanocomposite TiN???TiB2 films: experiment and simulation, Surface and Coatings Technology, vol.200, issue.22-23, pp.6474-6478, 2006.
DOI : 10.1016/j.surfcoat.2005.11.065

H. Zhao, Q. Fan, L. Song, T. Zhang, E. Shi et al., Synthesis and characterization of superhard Ti???Si???N films obtained in an inductively coupled plasma enhanced chemical vapor deposition (ICP-CVD) with magnetic confinement, Applied Surface Science, vol.252, issue.8, pp.3065-3072, 2006.
DOI : 10.1016/j.apsusc.2005.05.020

M. A. Djouadi, C. Nouveau, P. Beer, and M. Lambertin, Cr x N y hard coatings deposited with PVD method on tools for wood machining, Surface and Coatings Technology, pp.133-134, 2000.

C. Nouveau, E. Jorand, C. D. Petit, C. Labidi, and M. A. Djouadi, Influence of carbide substrates on tribological properties of chromium and chromium nitride coatings: application to wood machining, Wear, vol.258, issue.1-4, pp.157-165, 2005.
DOI : 10.1016/j.wear.2004.09.034

B. Tlili, Caractérisation de films durs multicouches élaborés par pulvérisation magnétron

Y. Benlatreche, Contribution à l " amélioration de la durée de vie d " outils carbure pour l " usinage du MDF (Medium Density Fiberboard) par application de dépôts ternaires (CrAlN, CrVN) et modification de l, pp.2011-2025

B. Navinsek, P. Panjan, and A. Cvelbar, Characterization of low temperature CrN and TiN (PVD) hard coatings, Surface and Coatings Technology, vol.74, issue.75, pp.74-75, 1995.
DOI : 10.1016/0257-8972(95)08214-X

B. Navinsek, P. Panjan, and I. Milosev, Industrial applications of CrN (PVD) coatings, deposited at high and low temperatures, Surface and Coatings Technology, vol.97, issue.1-3, pp.182-191, 1997.
DOI : 10.1016/S0257-8972(97)00393-9

J. Jagielski, A. S. Khanna, and J. Kwinski, Effect of chromium nitride coating on the corrosion and wear resistance of stainless steel, Applied Surface Science, vol.156, issue.1-4, pp.47-64, 2000.
DOI : 10.1016/S0169-4332(99)00350-5

C. Nouveau, Etude de revêtements durs (Cr x N y ) obtenus par méthodes P.V.D. : relation et caractérisations. Application à l " usinage du bois, Thèse de doctorat d " ENSAM de Cluny, 2001.

C. Friedrich, G. Berg, E. Broszeit, F. Rick, and J. Holland, PVD CrxN coatings for tribological application on piston rings, Surface and Coatings Technology, vol.97, issue.1-3, pp.661-668, 1997.
DOI : 10.1016/S0257-8972(97)00335-6

Y. L. Su and S. H. Yao, On the performance and application of CrN coating, Wear, vol.205, issue.1-2, pp.112-119, 1997.
DOI : 10.1016/S0043-1648(96)07286-9

E. Broszeit, C. Friedrich, and G. Berg, Deposition, properties and applications of PVD CrxN coatings, Surface and Coatings Technology, vol.115, issue.1, pp.9-16, 1999.
DOI : 10.1016/S0257-8972(99)00021-3

P. Pascal, J. Amiel, J. Aubry, and A. Cnretien, Nouveau traité de chimie minérale, 1959.

V. Mortet, «Croissance et caractérisation de couches minces de nitrure d " aluminium et de nitrure de bore cubique obtenues par pulvérisation triode, Thèse de Doctorat, 2001.

H. C. Barshilia, N. Selvakumar, B. Deepthi, and K. S. Rajam, A comparative study of reactive direct current magnetron sputtered CrAlN and CrN coatings, Surface and Coatings Technology, vol.201, issue.6, pp.2193-2201, 2006.
DOI : 10.1016/j.surfcoat.2006.03.037

. Homberg, Thin Solid Films 193, pp.547-556, 1990.

Y. Setsuhara, T. Suzuki, Y. Makino, S. Miyake, T. Sakata et al., Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with, Materials and Atoms, vol.106, pp.1-4, 1995.

S. Lee and Y. Hong, Effect of CrSiN thin film coating on the improvement of the low-speed torque efficiency of a hydraulic piston pump, Surface and Coatings Technology, vol.202, issue.4-7, pp.1129-1134, 2007.
DOI : 10.1016/j.surfcoat.2007.07.063

E. Bousser, M. Benkahoul, L. Martinu, and J. Klemberg-sapieha, Effect of microstructure on the erosion resistance of Cr???Si???N coatings, Surface and Coatings Technology, vol.203, issue.5-7, pp.776-780, 2008.
DOI : 10.1016/j.surfcoat.2008.08.012

G. Kim, B. Kim, and S. Lee, High-speed wear behaviors of CrSiN coatings for the industrial applications of water hydraulics, Surface and Coatings Technology, vol.200, issue.5-6, pp.1814-1818, 2005.
DOI : 10.1016/j.surfcoat.2005.08.059

M. Benkahoul, P. Robin, S. Gujrathi, L. Martinu, and J. Klemberg-sapieha, Microstructure and mechanical properties of Cr???Si???N coatings prepared by pulsed reactive dual magnetron sputtering, Surface and Coatings Technology, vol.202, issue.16, pp.3975-3980, 2008.
DOI : 10.1016/j.surfcoat.2008.02.014

K. Yamamoto, T. Sato, and M. Takeda, Structural analysis of (Cr1???xSix)N coatings and tribological property in water environment, Surface and Coatings Technology, vol.193, issue.1-3, pp.167-172, 2005.
DOI : 10.1016/j.surfcoat.2004.08.150

M. Masuko, A. Suzuki, Y. Sagae, M. Tokoro, and K. Yamamoto, Friction characteristics of inorganic or organic thin coatings on solid surfaces under water lubrication, Tribology International, vol.39, issue.12, pp.1601-1608, 2006.
DOI : 10.1016/j.triboint.2006.03.002

Y. Yoo, J. Hong, J. Kim, H. Lee, and J. Han, Effect of Si addition to CrN coatings on the corrosion resistance of CrN/stainless steel coating/substrate system in a deaerated 3.5??wt.% NaCl solution, Surface and Coatings Technology, vol.201, issue.24, pp.9518-9523, 2007.
DOI : 10.1016/j.surfcoat.2007.04.005

J. Kim, K. Ho-kim, D. B. Lee, and J. J. Moore, Study on high-temperature oxidation behaviors of Cr???Si???N films, Surface and Coatings Technology, vol.200, issue.24, pp.6702-6705, 2006.
DOI : 10.1016/j.surfcoat.2005.10.004

J. Schumann, C. Gladun, J. Monch, A. Heinrich, J. Thomas et al., Nanodispersed CrxSi1???x thin films: transport properties and thermoelectric application, Thin Solid Films, vol.246, issue.1-2, pp.24-29, 1994.
DOI : 10.1016/0040-6090(94)90726-9

H. Lee, W. Jung, J. Han, S. Seo, J. Kim et al., The synthesis of CrSiN film deposited using magnetron sputtering system, Surface and Coatings Technology, vol.200, issue.1-4, pp.1026-1030, 2005.
DOI : 10.1016/j.surfcoat.2005.02.006

I. Park, D. S. Kang, J. J. Moore, S. C. Kwon, J. J. Rha et al., Microstructures, mechanical properties, and tribological behaviors of Cr???Al???N, Cr???Si???N, and Cr???Al???Si???N coatings by a hybrid coating system, Surface and Coatings Technology, vol.201, issue.9-11, pp.5223-5227, 2007.
DOI : 10.1016/j.surfcoat.2006.07.118

D. Mercs, N. Bonasso, S. Naamane, J. Bordes, and C. Coddet, Mechanical and tribological properties of Cr???N and Cr???SI???N coatings reactively sputter deposited, Surface and Coatings Technology, vol.200, issue.1-4, pp.403-407, 2005.
DOI : 10.1016/j.surfcoat.2005.02.214

J. H. Ouyang and S. Sasaki, Tribo-oxidation of cathodic arc ion-plated (V,Ti)N coatings sliding against a steel ball under both unlubricated and boundary-lubricated conditions, Surface and Coatings Technology, vol.187, issue.2-3, pp.343-357, 2004.
DOI : 10.1016/j.surfcoat.2004.02.027

W. D. Sproul, High rate reactive sputtering process control, Surface and Coatings Technology, vol.33, pp.73-81, 1987.
DOI : 10.1016/0257-8972(87)90178-2

R. P. Howson, N. Danson, and I. Safi, High rate reactive sputtering using gas pulsing: a technique for the creation of films onto large, flat substrates, Thin Solid Films, vol.351, issue.1-2, pp.32-36, 1999.
DOI : 10.1016/S0040-6090(99)00081-4

N. Danson, G. W. Hall, and R. P. Howson, Improved control techniques for the reactive magnetron sputtering of silicon to produce silicon oxide and the implications for selected film properties, Thin Solid Films, vol.289, issue.1-2, pp.99-106, 1996.
DOI : 10.1016/S0040-6090(96)08881-5

D. Mattox, Handbook of Physical Vapor Deposition (PVD) Processing, 1998.

J. A. Thornton, Influence of apparatus geometry and deposition conditions on the structure and topography of thick sputtered coatings, Journal of Vacuum Science and Technology, vol.11, issue.4, p.666, 1974.
DOI : 10.1116/1.1312732

W. H. Bragg, The universe of light Macmillan, 1934.

P. M. Martin, Handbook of Deposition Technologies for Films and Coatings, Third Edition: Science, Applications and Technology, 2009.

F. Maurice, L. Meny, and R. Tixier, Microanalyse et Microscopie Electronique à Balayage, Les Éditions de Physique d, 1978.

A. Perrin, Principe du MEB et de la microanalyse par EDS (cours d'André Perrin de l'Université de Rennes 1), 2011.

R. Fliti, Master 2R (IMS) LaBoMaP, Caractérisation en usure de revêtements par tribométrie haute température pour des applications mécaniques, 2012.

B. Tlili, Caractérisation de films durs multicouches élaborés par pulvérisation magnétron. Influence des conditions d " élaboration sur leurs propriétés, Thèse, pp.2010-0059

D. François, Techniques de l " ingénieur, Essais mécaniques des métaux ? Essais de dureté, p.123

J. L. Lebrun, Contraintes résiduelles et hétérogénéités de structures et de déformations : Classification et méthodes expérimentales de détermination, Mécanisme et Mécanique Des Matériaux Multifonctionnels, p.41, 1997.

K. Inal and J. L. Lebrun, Approches num??riques et exp??rimentales du passage micro-macro dans des aciers aust??no-ferritiques, Le Journal de Physique IV, vol.08, issue.PR4, pp.69-74
DOI : 10.1051/jp4:1998408

A. G. Evans and J. Hutchinson, The thermomechanical integrity of thin films and multilayers, Acta Metallurgica et Materialia, vol.43, issue.7, pp.2507-2530, 1995.
DOI : 10.1016/0956-7151(94)00444-M

M. F. Doerner, W. C. Oliver, F. R. Pharr, and . Brotzen, Thin Films: Stresses and Mechanical Properties II, 1990.

C. Nouveau, Etude de revêtements durs (Cr x N y ) obtenus par méthodes P.V.D. : relation et caractérisations. Application à l " usinage du bois, Thèse de doctorat ENSAM de Cluny, 2001.

W. C. Oliver and G. M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, Journal of Materials Research, vol.XI, issue.06, pp.1564-1582, 1992.
DOI : 10.1557/JMR.1992.0613

Y. Berthier and M. , Godet's,Tribology, pp.32-53, 1996.

M. Azzi, M. Benkahoul, J. A. Szpunar, J. E. Klemberg-sapeiha, and L. Martinu, Tribological properties of CrSiN-coated 301 stainless steel under wet and dry conditions, Wear, vol.267, issue.5-8, pp.882-889, 2009.
DOI : 10.1016/j.wear.2009.01.027

M. Azzi, Role of synergy between wear and corrosion in degradation of materials, Thèse de doctorat de l " université de

I. Chapitre, Caractéristiques des couches minces de nitrures de chrome obtenues par pulvérisation cathodique RF et DC 81

C. Nouveau, Etude de revêtements durs (Cr x N y ) obtenus par méthodes P.V.D. : relation et caractérisations. Application à l " usinage du bois, 2000.

P. Hones, Structural and electronic properties of transition metal nitride with emphasis on chromium nitride based thin films, thèse de doctorat de l'EPFL de Lausanne, 2000.

J. Pelleg, L. Z. Zevin, S. Lungo, and N. Croitoru, Reactive-sputter-deposited TiN films on glass substrates, Thin Solid Films, vol.197, issue.1-2, pp.117-128, 1991.
DOI : 10.1016/0040-6090(91)90225-M

C. S. Shin, Y. Kim, D. Gall, J. E. Greene, and I. Petrov, Phase composition and microstructure of polycrystalline and epitaxial TaNx layers grown on oxidized Si(001) and MgO(001) by reactive magnetron sputter deposition, Thin Solid Films, vol.402, issue.1-2, pp.172-182, 2002.
DOI : 10.1016/S0040-6090(01)01618-2

E. Forniés, E. Escobar-galindo, O. Sanchez, and J. M. Albella, Growth of CrNx films by DC reactive magnetron sputtering at constant N2/Ar gas flow, Surface and Coatings Technology, vol.200, issue.20-21, pp.6047-6053, 2006.
DOI : 10.1016/j.surfcoat.2005.09.020

S. Mahieu and D. Depla, Reactive sputter deposition of TiN layers: modelling the growth by characterization of particle fluxes towards the substrate, Journal of Physics D: Applied Physics, vol.42, issue.5, p.53002, 2009.
DOI : 10.1088/0022-3727/42/5/053002

I. Safi, Recent aspects concerning DC reactive magnetron sputtering of thin films: a review, Surface and Coatings Technology, vol.127, issue.2-3, pp.203-219, 2000.
DOI : 10.1016/S0257-8972(00)00566-1

A. G. Spencer, R. P. Howson, and R. W. Lewin, Pressure stability in reactive magnetron sputtering, Thin Solid Films, vol.158, issue.1, pp.141-149, 1988.
DOI : 10.1016/0040-6090(88)90310-0

W. J. Meng, J. A. Seil, and T. A. Perry, Growth of aluminum nitride thin films on Si(111) and Si(001): Structural characteristics and development of intrinsic stresses, Journal of Applied Physics, vol.75, issue.7, pp.3446-3455, 1994.
DOI : 10.1063/1.356105

W. J. Meng, J. A. Seil, G. L. Eesley, and T. A. Perry, Measurement of intrinsic stresses during growth of aluminum nitride thin films by reactive sputter deposition, Journal of Applied Physics, vol.74, issue.4, pp.2411-2414, 1993.
DOI : 10.1063/1.354701

D. S. Rickerby, A. M. Jones, and B. A. Bellamy, X-ray diffraction studies of physically vapour-deposited coatings, Surface and Coatings Technology, vol.37, issue.1, pp.111-137, 1989.
DOI : 10.1016/0257-8972(89)90124-2

D. S. Rickerby, Internal stress and adherence of titanium nitride coatings, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.4, issue.6, pp.2809-2814, 1986.
DOI : 10.1116/1.573683

I. Chapitre, Caractéristiques des couches minces de nitrures de chrome obtenues par pulvérisation cathodique RF et DC 132

T. Polcar, N. M. Parreira, and R. Novak, Friction and wear behaviour of CrN coating at temperatures up to 500????C, Surface and Coatings Technology, vol.201, issue.9-11, pp.5228-5235, 2007.
DOI : 10.1016/j.surfcoat.2006.07.121

Q. Kong, L. Ji, H. Li, X. Liu, Y. Wang et al., Composition, microstructure, and properties of CrNx films deposited using medium frequency magnetron sputtering, Applied Surface Science, vol.257, issue.6, pp.2269-2274, 2011.
DOI : 10.1016/j.apsusc.2010.09.086

J. B. Bindell and T. C. Tisone, Step coverage from an extended sputtering source, Thin Solid Films, vol.23, issue.1, p.31, 1974.
DOI : 10.1016/0040-6090(74)90215-6

S. Lichter and J. Chen, Model for Columnar Microstructure of Thin Solid Films, Physical Review Letters, vol.56, issue.13, p.1396, 1986.
DOI : 10.1103/PhysRevLett.56.1396

J. F. Ziegler, J. P. Biersack, and M. D. Ziegler, SRIM The Stopping and Range of Ions in Matter, 2008.

I. Chapitre, Caractérisation des couches de nitrures de chrome obtenues par injection pulsée du gaz réactif par pulvérisation magnétron DC 133

V. Chapitre, Caractérisation des couches de nitrures de chrome obtenues par pulvérisation magnétron RF avec dopage d " un élément d " addition tel que le

C. Labidi, R. Collet, C. Nouveau, P. Beer, S. Nicosia et al., Surface treatments of tools used in industrial wood machining, Surface and Coatings Technology, vol.200, issue.1-4, pp.118-122, 2005.
DOI : 10.1016/j.surfcoat.2005.02.098

S. K. Pradhan, C. Nouveau, A. Vasin, and M. Djouadi, Deposition of CrN coatings by PVD methods for mechanical application, Surface and Coatings Technology, vol.200, issue.1-4, pp.141-145, 2005.
DOI : 10.1016/j.surfcoat.2005.02.038

C. Nouveau, C. Labidi, J. Martin, R. Collet, and M. A. Djouadi, Application of CrAlN coatings on carbide substrates in routing of MDF, Wear, vol.263, issue.7-12, pp.1291-1299, 2007.
DOI : 10.1016/j.wear.2006.12.069
URL : https://hal.archives-ouvertes.fr/hal-00391955

C. Nouveau, C. Labidi, R. Collet, Y. Benlatreche, and M. Djouadi, Effect of surface finishing such as sand-blasting and CrAlN hard coatings on the cutting edge's peeling tools??? wear resistance, Wear, vol.267, issue.5-8, pp.1062-1067, 2009.
DOI : 10.1016/j.wear.2009.01.045

Y. Benlatreche, C. Nouveau, R. Marchal, J. Martins, and H. Aknouche, Applications of CrAlN ternary system in wood machining of medium density fibreboard (MDF), Wear, vol.267, issue.5-8, pp.1056-1061, 2009.
DOI : 10.1016/j.wear.2009.01.044
URL : https://hal.archives-ouvertes.fr/hal-00917387

B. Tlili, N. Mustapha, C. Nouveau, Y. Benlatreche, G. Guillemot et al., Correlation between thermal properties and aluminum fractions in CrAlN layers deposited by PVD technique, Vacuum, vol.84, issue.9, pp.1067-1074, 2010.
DOI : 10.1016/j.vacuum.2010.01.011
URL : https://hal.archives-ouvertes.fr/hal-00840830

C. Labidi, Amélioration de la durée de service d " outils d " usinage du bois par traitements de surface et préparation de l " arête de coupe, Thèse de doctorat, pp.2006-0058

B. Tlili, Caractérisation de films durs multicouches élaborés par pulvérisation magnétron

Y. Benlatreche, Contribution à l " amélioration de la durée de vie d " outils carbure pour l " usinage du MDF (Medium Density Fiber board) par application de dépôts ternaires (CrAlN, CrVN) et modification de l, pp.2011-2025

J. Musil, P. Dohnal, and P. Zeman, Physical properties and high-temperature oxidation resistance of sputtered Si[sub 3]N[sub 4]???MoN[sub x] nanocomposite coatings, Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, vol.23, issue.4, p.1568, 2006.
DOI : 10.1116/1.1947798

V. Chapitre, Caractérisation des couches de nitrures de chrome obtenues par pulvérisation magnétron RF avec dopage d " un élément d " addition tel que le

Y. H. Yoo, J. H. Hong, J. G. Kim, H. Y. Lee, and J. G. Han, Effect of Si addition to CrN coatings on the corrosion resistance of CrN/stainless steel coating/substrate system in a deaerated 3.5??wt.% NaCl solution, Surface and Coatings Technology, vol.201, issue.24, pp.9518-9523, 2007.
DOI : 10.1016/j.surfcoat.2007.04.005

K. Rahmoun, A. Iost, V. Keryvin, G. Guillemot, and N. E. Sari, A multilayer model for describing hardness variations of aged porous silicon low-dielectric-constant thin films, Thin Solid Films, vol.518, issue.1, pp.213-221, 2009.
DOI : 10.1016/j.tsf.2009.07.040
URL : https://hal.archives-ouvertes.fr/hal-01170940

C. S. Sandu, R. Sanjnés, M. Benkahoul, M. Parlinska-wojtan, A. Karimi et al., Influence of Ge addition on the morphology and properties of TiN thin films deposited by magnetron sputtering, Thin Solid Films, vol.496, issue.2, pp.336-341, 2006.
DOI : 10.1016/j.tsf.2005.09.154

C. S. Sandu, R. Sanjinés, M. Benkahoul, F. Medjani, and F. Lévy, Formation of composite ternary nitride thin films by magnetron sputtering co-deposition, Surface and Coatings Technology, vol.201, issue.7, pp.4083-4089, 2006.
DOI : 10.1016/j.surfcoat.2006.08.100

A. Pélisson, M. Parlinska-wojtan, H. J. Hug, and J. Patscheider, Microstructure and mechanical properties of Al???Si???N transparent hard coatings deposited by magnetron sputtering, Surface and Coatings Technology, vol.202, issue.4-7, pp.884-889, 2007.
DOI : 10.1016/j.surfcoat.2007.05.094

A. Berradja, F. Bratu, L. Benea, and G. Willems, Effect of sliding wear on tribocorrosion behaviour of stainless steels in a Ringer's solution, Wear, vol.261, issue.9, p.987, 2006.
DOI : 10.1016/j.wear.2006.03.003

V. Chapitre, Caractérisation des couches de nitrures de chrome obtenues par pulvérisation magnétron RF avec dopage d " un élément d

Y. Yan, A. Neville, D. Dowson, and S. Williams, Tribocorrosion in implants???assessing high carbon and low carbon Co???Cr???Mo alloys by in situ electrochemical measurements, Tribology International, vol.39, issue.12, p.1509, 2006.
DOI : 10.1016/j.triboint.2006.01.016

P. Hones, N. Martin, M. Regula, and F. Lévy, Structural and mechanical properties of chromium nitride, molybdenum nitride, and tungsten nitride thin films, Journal of Physics D: Applied Physics, vol.36, issue.8, pp.1023-1029, 2003.
DOI : 10.1088/0022-3727/36/8/313

S. B. Amor, L. Guedri, G. Baud, M. Jacquet, and M. Ghedria, Influence of the temperature on the properties of sputtered titanium oxide films, Materials Chemistry and Physics, vol.77, issue.3, pp.903-911, 2002.
DOI : 10.1016/S0254-0584(02)00189-X

N. Martin, O. Banakh, A. M. Santo, S. Springer, R. Sanjinés et al., Correlation between processing and properties of TiOxNy thin films sputter deposited by the reactive gas pulsing technique, Applied Surface Science, vol.185, issue.1-2, pp.123-133, 2001.
DOI : 10.1016/S0169-4332(01)00774-7

N. Martin, J. Lintymen, J. Gavoille, J. M. Chappé, F. Sthal et al., Reactive sputtering of TiOxNy coatings by the reactive gas pulsing process. Part I: Pattern and period of pulses, Surface and Coatings Technology, vol.201, issue.18, pp.7720-7726, 2007.
DOI : 10.1016/j.surfcoat.2007.03.002
URL : https://hal.archives-ouvertes.fr/hal-00268078

D. Gall, R. Gampp, H. P. Lang, and P. Oelhafen, Pulsed plasma deposition of chromium oxide/chromium???cermet coatings, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.14, issue.2, pp.374-379, 1995.
DOI : 10.1116/1.580092

W. C. Oliver and G. M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, Journal of Materials Research, vol.XI, issue.06, pp.1564-1583, 1992.
DOI : 10.1557/JMR.1992.0613

M. Benkahoul, P. Robin, S. C. Gujrathi, L. Martinu, and J. E. Klemberg-sapieha, Microstructure and mechanical properties of Cr???Si???N coatings prepared by pulsed reactive dual magnetron sputtering, Surface and Coatings Technology, vol.202, issue.16, pp.3975-3980, 2008.
DOI : 10.1016/j.surfcoat.2008.02.014

J. G. Swadener, B. Taljat, and G. M. Pharr, Measurement of residual stress by load and depth sensing indentation with spherical indenters, Journal of Materials Research, vol.594, issue.07, pp.2091-2102, 2001.
DOI : 10.1557/JMR.1993.0297

V. Chapitre, Caractérisation des couches de nitrures de chrome obtenues par pulvérisation magnétron RF avec dopage d " un élément d