S. Sarabi, Vers une approche mécanistique du vieillissement thermique du PP au cours du rotomoulage, 2009.

R. J. Crawford, Rotational molding technology, 1996.

A. Tcharkhtchi, Rotomoulage des pièces en polymère, rapport interne, 2002.

R. Lebreton and J. Nialon, Le moulage par rotation des pièces creuses en matières plastiques, rapport interne, 2001.

S. L. Hafsaoui, R. Mahmoud, S. Farzaneh, and A. Tcharkhtchi, Study of polyamide 12 crytallization behavior within rotational molding process, Iranian Polymer Journal, vol.22, 2013.

S. L. Hafsaoui, M. Benziane, and A. Tcharkhtchi, Thermal transfer simulation regarding the rotational moulding of polyamide 11, Journal of Thermal Analysis and Calorimetry, vol.10, issue.1, 2012.
DOI : 10.1007/s10973-012-2806-4

URL : https://hal.archives-ouvertes.fr/hal-00984690

J. L. Throne, Some factors influencing cooling rates of rotationally molded parts, Polymer Engineering and Science, vol.17, issue.5, 1972.
DOI : 10.1002/pen.760120504

D. W. Sun and R. J. Crawford, Computer simulation of rotational moulding heat transfer processes, Plastic, Rubber and Composites Processing and Applications, 1993.

P. Nugent, Study of heat transfer and process control in the rotational moulding of polymer powders, 1990.

R. J. Crawford and P. J. Nugent, A new process control system for rotational moulding: Plastics, Rubber and Composites Processing and Applications, 1992.

J. L. Throne, Rotational molding heat transfer?an update, Polymer Engineering and Science, vol.11, issue.4, 1976.
DOI : 10.1002/pen.760160407

A. Tcharkhtchi, E. Pérot, and F. Chinesta, Simulation of thermal phenomena on the interface molten polymer: Powder polymer during rotational molding, International Polymer Processing, 2004.

A. Carin, Etude expérimentale et modélisation thermomécanique de l'étape de calibration dans le procédé d'extrusion de tubes en PA12, 2002.

M. N. Grig, Thermo-oxidative degradation of PA6, 2006.

F. Samyn, Compréhension des procédés d'ignifugation du PA6, 2007.

G. Boisot, Mécanismes et modélisation mécanique de la déformation, de l'endommagement et de la rupture du PA11 pur et renforcé, 2009.

R. Mendoza, Morphologies induites dans les pièces en polyoléfine moulées par injection, 2005.

Z. Safidine, Etude de la cinétique de cristallisation des mélanges composites PP/PA6 renforcé en fibres de verre, 2000.

J. Vendramini, Architecture, propriétés mécaniques d'une nouvelle génération de composites poly (butylène téréphtalate) / fibres de verre unidirectionnelles, thèse, 1999.

J. C. Won, Etude de la cristallisation sous pression du PA66: Influence de la formulation, thèse, 1999.

M. F. Chemamedji, Étude de la cinétique de cristallisation du PP isotactique par DSC, 2001.

U. R. Evans, The laws of expanding circles and spheres in relation to the lateral growth of surface films and the grain-size of metals, Transactions of the Faraday Society, vol.41, 1945.
DOI : 10.1039/tf9454100365

M. Avrami, Granulation, Phase Change, and Microstructure Kinetics of Phase Change. III, The Journal of Chemical Physics, vol.9, issue.2, 1941.
DOI : 10.1063/1.1750872

M. Avrami, Kinetics of Phase Change. I General Theory, The Journal of Chemical Physics, vol.7, issue.12, 1939.
DOI : 10.1063/1.1750380

T. Ozawa, Kinetics of non-isothermal crystallization, Polymer, vol.12, issue.3, 1971.
DOI : 10.1016/0032-3861(71)90041-3

J. Liu and Z. Mo, Non-isothermal crystallization behaviors of polyamide 6/clay nanocomposites, European Polymer Journal, vol.38, issue.7, 1993.
DOI : 10.1016/S0014-3057(01)00304-4

K. Nakamura and T. Amano, Some aspects of non-isothermal crystallization of polymers. I: Relationship between crystallization temperature, crystallinity and cooling conditions, Journal of Applied Polymer Science, 1972.

K. Nakamura, K. Katayama, and T. Amano, Some aspects of non-isothermal crystallization of polymers. II: Consideration of isokinetic conditions, Journal of Applied Polymer Science, 1973.

G. Lamberti and G. Titomanlio, Analysis of film casting process: The heat transfer phenomena, Chemical Engineering and Processing: Process Intensification, vol.44, issue.10, 2005.
DOI : 10.1016/j.cep.2005.01.009

G. Lamberti and G. Titomanlio, Crystallization kinetics of iPP. Model and experiments, Polymer Bulletin, vol.46, issue.2-3, 2001.
DOI : 10.1007/s002890170079

P. Duffo, B. Monasse, and J. M. Haudin, Cast film extrusion of PP, thermo-mechanical and physical aspects, Journal of Polymer Engineering, 1991.

J. D. Hoffmann, L. J. Frolen, G. S. Ross, and J. I. Lauritzen, On the growth rate of spherulites and axialites from the melt in polyethylene fractions: Regime I and regime II crystallization, Journal of Research of the National Bureau of Standards Section A: Physics and Chemistry, vol.79, issue.6, 1975.
DOI : 10.6028/jres.079A.026

J. D. Hoffmann, Regime III crystallization in melt-crystallized polymers: The variable cluster model of chain folding, Polymer, vol.24, issue.1, 1983.
DOI : 10.1016/0032-3861(83)90074-5

P. Duffo, Etude théorique et expérimentale du procédé de fabrication de films minces de PP par extrusion-Biétirage, 1990.

B. Monasse, Contribution à l'analyse de la cristallisation du PP et de copolymères éthylène propylène, 1982.

E. Koscher and R. Fulchiron, Influence of shear on PP crystallization: Morphology development and kinetics, Polymer, vol.43, 2002.

J. Smirnova, L. Silva, B. Monasse, J. L. Chenot, and J. M. Haudin, Numerical and physical modeling of bi-phasic flow induced crystallization

N. Billon, P. Barq, and J. M. Haudin, Modeling of the cooling of semi-crystalline polymers during their processing, International Polymer Processing, 1991.

B. Monasse, Nucleation and anisotropic crystalline growth of polyethylene under shear, Journal of Materials Science, vol.87, issue.1, 1995.
DOI : 10.1007/BF01154515

G. Gogos, L. G. Olson, and X. Liu, Cycle time predictions for the rotational moulding process with and without mold: Part separation, Polymer Engineering and Science, 1999.

S. Smith and D. Stolle, Non-isothermal two-dimensional film casting of a viscous polymer, Polymer Engineering and Science, 2000.

G. Gogos, L. G. Olson, X. Liu, and V. R. Pasham, New models for rotational moulding of plastics, Polymer Engineering and Science, vol.38, 1998.

R. Djelouah, Comportement mécanique résiduel de polymères après vieillissement chimique en présence de l'acide sulfurique, 2009.

L. Xavier, Fissuration fragile lente du PA11: Mécanismes de vie en fluage, 2002.

J. E. Mark, Polymer Data Handbook, 1999.

L. G. Olson, R. J. Crawford, M. Kearns, and N. Giger, Rotational moulding of plastics: Comparison of simulation and experimental results for an axisymetric mold, Polymer Engineering and Science, 2000.

V. Aurore, Procédés d'ignifugation du poly(éthylène téréphtalate) : Application textile, thèse de doctorat, 2008.

A. E. Kouame, Etude de la migration des antioxydants phénoliques dans les boissons en sachet, 2004.

F. Poulard, Adhésion du PA11 : Mécanismes en vieillissement hygrothermal, 1998.

S. Jose, P. S. Thomas, S. Thomas, and J. K. Kocsis, Thermal and crystallization behaviour of blends of PA12 with styrene-ethylene/butylene-styrene rubbers, 2006.

Z. Safidine, Etude des propriétés des mélanges composites à base de PP/Pp-g-MAH/PA66 renforcés par les fibres de verre: Influence de la modification inter raciale, 2008.

S. Chew, J. R. Griffiths, and Z. H. Stachurski, The crystallization kinetics of polyethylene under isothermal and non-isothermal conditions, Polymer, vol.30, issue.5, 1989.
DOI : 10.1016/0032-3861(89)90185-7

H. Akbi and M. Chrigui, Étude de la cinétique de cristallisation des polyamides ? application dans le procédé de rotomoulage, 2010.

E. Piorkowska, A. Galeski, and J. M. Haudin, Critical assessment of overall crystallization kinetics theories and predictions, Progress in Polymer Science, vol.31, issue.6, 2006.
DOI : 10.1016/j.progpolymsci.2006.05.001

G. Poutot, Etude des transferts thermiques lors de la cristallisation d'un polymère semicristallin, 2002.

H. L. Wang, T. J. Shi, S. Z. Yang, and G. P. Hang, Crystallization behaviour of PA6

. Organic, Inorganic hybrid material, Materials Research Bulletin, vol.41, 2008.

B. Guo, Q. Zou, Y. Lei, M. Du, M. Liu et al., Crystallization behaviour of PA6/Halloysite nanotubes nanocomposites, Thermochimica Acta, vol.484, 2009.

Y. Liu and G. Yang, Non-isothermal crystallization kinetics of PA6/graphite oxide nanocomposite, Thermochimica Acta, 2009.

C. Zhao, P. Zhang, L. Yi, F. Xu, X. Wang et al., Study on the non-isothermal crystallization kinetics of a novel PA6/silica nanocomposites containing epoxy resins, Polymer Testing, vol.9, 2008.

C. Tribout, Etude expérimentale et théorique de la cristallisation du PP sous cisaillement : Application au procédé d'injection, thèse de doctorat, 1993.

F. Jay, Etude de la cristallisation du PP en écoulement : Application à la modélisation de film à plat, propriétés mécaniques résultantes, 1996.

S. Sarrabi, X. Colin, and A. Tcharkhtchi, Dégradation thermique du polypropylène au cours du rotomoulage. Partie I: simulation du transfert thermique (in French) Mater Tech, 2009.

J. E. Mark, Polymer Data Handbook, 1999.

R. Crawford and P. Nugent, Computer simulation of the rotational moulding process for plastics, Plast Rub Proc Appl, 1989.

G. Gogos, L. Olson, X. Liu, and V. Pasham, New models for rotational molding of plastics, Polymer Engineering & Science, vol.30, issue.9, 1998.
DOI : 10.1002/pen.10309

N. Sharma, K. M. Surendra, and C. B. Ray, Study of the Effect of Hygrothermal Ageing on Glass/Epoxy Micro-Composites by FTIR-Imaging and Alternating DSC Techniques, Journal od reinforced plastics and composites, 2008.
DOI : 10.1177/0731684407086318

E. M. Pearce and J. Bernard, Fourier Transform IR Spectroscopy for the Study of Polymer Degradation, Thermal and Thermooxidative Degradation of Polyethylene Terephthalate, 1983.