. Particularité, Le paramètre de maille peut augmenter de 0,0624 nm pour chaque % atomique supplémentaire de Nb et

. Pièces-moulées-au-laboratoire, couleur cyan sur la figure 143 Elles sont constituées de Secar 80 de la société Lafarge, dont la composition moyenne est de 80% d'alumine et 20% de CaO. 6)

. Dès-que-le-métal-est-froid, on peut éteindre les pompes, refermer les vannes du système de pompage et effectuer la remise à l'air. L'alimentation en eau peut être réduite après le chauffage et la coulée mais ne doit pas être éteinte tant que le four n'est pas totalement refroidi

W. Betteridge and A. Franklin, «The effect of heat treatement and structure on the creep and stress-rupture properties of Nimonic, J. Inst. Metals, pp.473-479, 1956.

R. I. Jewett and J. A. , Halchak, «The use of alloy 718 in the space shuttle main engine» Superalloys 718,625 and Various Derivatives, pp.749-760, 1991.

T. Antonsson and H. Fredriksson, The effect of cooling rate on the solidification of INCONEL 718, Metallurgical and Materials Transactions b, pp.85-96, 2005.
DOI : 10.1007/s11663-005-0009-0

. Bruke and . Miller, «Precipitation in alloy 718, a combined AEM and APFIM investigation,» Superalloys 718, pp.337-350, 1991.

Y. Liu and C. Wang, «Niobium segregation in Inconel 718, Journal of Materials Science, vol.34, issue.11, pp.2583-2586, 1999.
DOI : 10.1023/A:1004648615561

H. E. Collins, Relative Stability of Carbide and Intermetallic Phases in Nickel-Base Superalloys, International Symposium on Structural Stability in Superalloys (1968), pp.171-198, 1968.
DOI : 10.7449/1968/Superalloys_1968_171_198

M. Gao and R. P. Wei, GRAIN BOUNDARY NIOBIUM CARBIDES IN INCONEL 718, Scripta Materialia, vol.37, issue.12, pp.1843-1849, 1997.
DOI : 10.1016/S1359-6462(97)00373-4

A. Mitchell, A. Schmalz, and C. , Schvezov et S. Cockroft, «The precipitation of primary Carbides in Alloy 718,» Superalloys 718, 625 and various derivatives, p.79, 1994.

G. K. Bouse and P. W. , Schilke, «Process optimization of cast alloy 718 for Water cooled gas 176

. Pearson, Pearson's Handbook, Desk edition éd, 1997.

C. Dayong, L. Wenchang, L. Rongbin, Z. Weihong, and Y. Mei, On the accuracy of the X-ray diffraction quantitative phases analysis method in Inconel 718, Journal of Materials Science, vol.39, issue.2, pp.719-721, 2004.
DOI : 10.1023/B:JMSC.0000011540.61546.73

E. C. Guo and F. Ma, The Strengthening Effect of Niobium on Ni-Cr-Ti Type Wrought Superalloy, Superalloys 1980 (Fourth International Symposium), pp.431-438, 1980.
DOI : 10.7449/1980/Superalloys_1980_431_438

W. Cao, R. Kennedy, and M. Willis, «Differential thermal analysis study of the homogenization process in alloy 718,» Superalloys 718, pp.147-160, 1991.

K. Cieslak, . Headley, and . Romig, The Solidification Metallurgy of Alloy 718 and Other Nb-Containing Superalloys, Superalloys 718 Metallurgy and Applications (1989), pp.59-68, 1989.
DOI : 10.7449/1989/Superalloys_1989_59_68

W. Sun, S. Guo, D. Lu, and Z. Hu, Effect of sulfur on the solidification and segregation in Inconel 718 alloy, Materials Letters, vol.31, issue.3-6, pp.195-200, 1997.
DOI : 10.1016/S0167-577X(96)00266-2

Y. Ko and J. Berry, «Characterization of the dendritic microstructure of investment cast alloy 718,» Superalloys 718, pp.201-212, 1994.

S. Fu, J. Dong, M. Zhang, and X. Xie, Alloy design and development of INCONEL718 type alloy, Materials Science and Engineering: A, vol.499, issue.1-2, pp.215-220, 2009.
DOI : 10.1016/j.msea.2007.11.115

L. Liu, Effect of carbon additions on the microstructure in a Ni-base single crystal superalloy, Materials Letters, vol.58, issue.17-18, pp.2290-2294, 2004.
DOI : 10.1016/j.matlet.2004.01.038

L. Nastac and D. , Stefanescu, «Computational modeling of NbC/Laves formation in INCONEL 718 equiaxed castings, Metallurgical and Materials Transaction A, pp.1582-1587, 1997.

C. Chen, R. Thompson, and D. Davis, «A study of effects of phosphorus, sulfur, boron and carbon on Laves and Carbide formation in alloy 718,» Superalloys 718, pp.81-96, 1991.

J. T. Guo and L. Z. Zhou, «The effect of phosphorus, sulfure and silicon on segregation, solidification and mechanical properties of cast alloy 718,» Superalloys, pp.451-455, 1996.

R. Thompson, M. Koopman, and B. King, «Grain Boundary Chemistry of alloy 718-type alloys,» Superalloys 718, pp.53-70, 1991.

F. Fournier-dit and . Chabert, «Rechargement laser d'un superalliage à base de Nickel: Etude expérimentale et modélisation de l'endommagement, Thèse de doctorat, 2007.

C. Chen, . Richards, and . Mcmahon, «Grain boundary segregation of boron in inconel 718,» Metallurgical and materials transaction A, pp.1947-1954, 1998.

Y. Zhu, S. Zhang, T. Zhang, L. Lou, Y. Tong et al., Si on the solidification segregation of inconel 718 alloy,» Superalloys 718, pp.89-98, 1994.

J. Horton, C. Mckamey, M. Miller, W. Cao, and R. Kennedy, «Microstructural characterization of superalloy 718 with boron and phosphorus additions,» Superalloy 718, pp.401-406, 1997.

G. Chen, Q. Zhu, D. Wang, X. Xie, and J. Radavich, «Effect of magnesium on niobium segregation and impact toughness in cast alloy 718,» Superalloys, pp.545-551, 1989.

R. Kennedy, R. Davis, and F. Vaccaro, «An evaluation of spray formed alloy 718,» Superalloy 718-Metallurgy and Applications, pp.97-108, 1989.

R. Devries and G. Mumau, Importance of a relationship between dendrite formation and solidification in highly alloyed materials, JOM, vol.236, issue.11, pp.33-36, 1968.
DOI : 10.1007/BF03378758

R. Jewett and J. Halchak, «The use of alloy 718 in the space shuttle main engine,» Superalloys 718, pp.749-760, 1991.

E. Andrieu, R. Cozar, and A. Pineau, «Effect of environment and microstructure on the hight temperature behavior of alloy 718,» Superalloys 718, pp.241-256, 1989.

S. Badu, «Oxidation characteristics and thermal expansion of inconel alloy 718 from 300K to 1273K,» Superalloy 718, pp.689-693, 1997.

K. Yu and J. , Domingue, «control of solidification structure in VAR and ESR processed alloy 718 ingots,» Superalloys 718, pp.33-48, 1989.

D. A. Chang, R. Nasser-rafi, and S. L. , Roertson, «Mechanical Properties of controlled grain structure (CGS) alloy 718,» Superalloys 718, pp.271-286, 1991.

M. Woulds and H. Benson, «Development of a conventional fine grain casting process,» Superalloys, 1984.

G. K. Bouse and M. R. Behrendt, «Mechanical propertise of microcast-X alloy 718 fine grain investment castings,» Superalloys 718, pp.319-328, 1989.

P. D. Prichard and R. P. , Dalal, «Spraycast-X superalloy for aerospace applications,» Superalloys, pp.205-214, 1992.

G. E. Gapiniski and T. J. Devine, Mechanical Properties and Microstructure of Fine Grain, Centrifugally Cast Alloy 718, Superalloys 718 Metallurgy and Applications (1989), pp.533-544, 1989.
DOI : 10.7449/1989/Superalloys_1989_533_544

B. Pieraggi and J. F. Uginet, «Fatigue and creep properties in relation with alloy 718 microstructure,» Supralloy 718, pp.535-544, 1994.

M. Gao and R. P. Wei, «Grain boundary '' precipitate and niobium segregation in incoenl 718, Scripta Metallurgica et Materialia, pp.987-990, 1995.

E. G-u-o, F. X-u-e-t, and E. A. , L o r i a , « I m p roving thermal stability of alloy 718 via small modifications in composition, pp.567-576, 1989.

R. Yoda, Y. Sato, and T. Wanatabe, «Effects of additions of aluminium and titanium on recrystallization of 80Ni-20Cr alloys,» superalloys, pp.80-114, 1968.

Y. Rong, S. Chen, G. Hu, M. Gao, and R. P. Wei, «Prediciton and characterization of variant electron diffraction patterns for '' and delta precipitates in an INCONEL 718 alloy,» Metallurgica and materials transaction A, pp.2297-2303, 1999.

. He, . Tang, . Fukuyama, and . Yokogawa, «Boundary in '' precipitates in inconel 718 Nickel-base superalloy,» Acta metallurgica mater, pp.4403-4409, 1995.

J. K. Tien, J. P. Collier, and G. , Vignoul, «The role of niobium and other refractory elements in superalloys, pp.553-556, 1989.

R. Antony, «The metallurgical aspects of hot isostatically pressed superalloy casting,» Superalloys, pp.257-266, 1980.

. Lamberigts, . Diderrich, D. Coutsouradis, and . Lamotte, Drapier et Deridder, «HIP'ing various precision cast engine components in nickel-base superalloys,» Superalloys, pp.285-295, 1980.

D. Bouse and . Lane, «Mechanical properties of fine-grain microcast-X alloy 718 investment castings for SSME, gas turbine engine, and airframe components,» Superalloys 718, and Various Derivatives, pp.706-459, 1997.

M. Sundararaman and . Banerjee, Carbide Precipitation in Nickel Base Superalloys 718 and 625 and Their Effect on Mechanical Properties, Superalloys 718, 625, 706 and Various Derivatives (1997), pp.367-378, 1997.
DOI : 10.7449/1997/Superalloys_1997_367_378

. Moon and . Wall, The Effect of Phase Instability on the High Temperature Stress-Rupture Properties of Representative Nickel-Base Superalloys, International Symposium on Structural Stability in Superalloys (1968), pp.115-133, 1968.
DOI : 10.7449/1968/Superalloys_1968_115_133

. Andersson, . Helander, . Höglund, . Shi, and . Sundman, «Thermo-calc & dictra, computational tools for material science,» Calphad, pp.273-312, 2002.

J. S. Slaney, «A general method for the prediction of precipitate compositions,» Superalloys, pp.67-79, 1968.

W. H. Sutton and W. A. Johnson, «Reactions between Al2O3/MgO crucible materials and vacuum melted Hf-earing superalloy,» superalloys, pp.311-322, 1980.
DOI : 10.7449/1980/superalloys_1980_311_320

A. Mitchell, «Melting processes and solidification in alloys 718-625,» Superalloys 718,625 and Various Derivatives, pp.15-27, 1991.

J. P. Stroup and R. A. , Heacox, «Effect of grain size variations on the long time stability of alloy 718,» Superalloys, pp.544-578, 1968.

Z. Yun, H. Xuebing, W. Yong, and Y. , Weicheng et H. Zhuangqi, «Delta phase and deformation fracture behaviour of inconel 718 alloy,» Superalloys 718, and Various Derivatives, pp.706-229, 1997.

R. Cremisio and . Butler, «The effect of thermomecanical history on the stability of alloy 718,» Superalloys, pp.597-618, 1968.

J. J. Schirra, R. H. Caless, and R. W. , Hatala, «The effect of Laves phase on the mechanical properties of wrought and cast+HIP inconel 718,» Superalloys 718, pp.375-388, 1991.

C. Huang, «An investigation of microstructure and HAZ microfissuring of cast alloy 718,» Superalloys 718, pp.871-880, 1994.

R. Carlson, «Microstructural charactérisation of cast 718,» Superalloy 718-Metallurgy and Applications, pp.79-95, 1989.

C. Mitchell, . Takahashi, and . Schmalz, «The columnar/equiax transition in In718 and Related alloys,» Superalloys 718,625,706 and Various Derivatives, p.79, 1994.

. Sung, . Poirier, and A. Poirier, Simulations of microporosity in IN718 equiaxed investment castings, Journal of Crystal Growth, vol.226, issue.2-3, pp.363-377, 2001.
DOI : 10.1016/S0022-0248(01)01380-X

L. Ouichou and . Lesoult, Influence of the Chemical Composition of Nickel-Base Superalloys on Their Solidification Behavior and Foundry Performance, Superalloys 1980 (Fourth International Symposium), pp.235-244, 1980.
DOI : 10.7449/1980/Superalloys_1980_235_244

S. Mitchell, «The Role of TiN precipitation in determing microporosity in castings 181

P. J. Spencer, «A brief history of CLAPHAD.,» Computeur Coupling of Phase Diagrams and Thermochemistry, pp.1-8, 2008.

. Balea, . Bélislea, . Chartranda, . Decterova, . Erikssonb et al., «Factsage thermochemical software and databases -recent developments,» Tools for computational Thermodynamics, pp.295-311, 2009.

. Davies, . Dinsdale, . Chart, and R. Barry, «Application of MTDATA to the modeling of multicomponent equilibra, chez Proceedings of the sixth international conference on hight temperatures -chemistry of inorganic materials, 1989.

G. H. Gulliver, Metallic alloys, Londre: Charles Griffin, 1922.

F. Kurz, Fundamentals solidification, 1998.

J. A. Sarreal and G. J. , Abbaschian, «The effect of solidification rate on microsegregation, Metllurgical transactions A, pp.2063-2071, 1986.

D. Tourret, «Modélisation de cinétiques de transformations multiples dans les alliages métalliques,» thèse de doctorat, 2009.

H. and B. Hamouda, «Modélisation et Simulation de la structure de solidificatio ndans les superalliages base-nickel : Application AM1,» thèse de doctorat, 2012.

X. Zhang, C. Gandin, H. B. Hamouda, D. Tourret, and K. Nakajima, He, «Prediction of solidification paths for FE-C-Cr alloys by a multiphase segregation model coupled to thermodynamic equilibrium calculations, ISIJ International, vol.12, pp.1859-1866, 2010.

. Rappaz and . Boettinger, On dendritic solidification of multicomponent alloys with unequal liquid diffusion coefficients, Acta Materialia, vol.47, issue.11, pp.3205-3219, 1999.
DOI : 10.1016/S1359-6454(99)00188-3

A. Chtourou, «Propriétés structurales et défauts d'éprouvettes en superalliage à base de nickel, 2009.

«. Internationnal and ». En, Available: http://www.astm

. Thompson, «Microstructure analysis of fine grain alloy 718 Casting,» Superalloys 718,625,706 and Various Derivatives, pp.213-228, 1994.

M. Ganesan, D. Dye, and P. Lee, A technique for characterizing microsegregation in multicomponent alloys and its application to single-crystal superalloy castings, Metallurgical and Materials Transactions A, vol.373, issue.8, pp.2191-2203, 2005.
DOI : 10.1007/s11661-005-0338-2

T. Carozzani, «Développement d'un modèle 3D Automate Cellulaire-Éléments Finis (CAFE) parallèle pour la prédiction de structures de grains lors de la solidification d'alliages métalliques, 2012.

S. M. Jones, J. Radavich, and S. Tian, Effect of Composition on Segregation Microstructures and Mechanical Properties of Cast Alloy 718, Superalloys 718 Metallurgy and Applications (1989), pp.589-724, 1989.
DOI : 10.7449/1989/Superalloys_1989_589_597

J. Groh and J. Radavich, «Effect of iron, nickel and cobalt on precipitation hardening of alloy 718,» Superalloys 718,625 and Various Derivatives, pp.351-361, 1991.

C. Gandin and M. Rappaz, «A 3D Cellular Automaton algorithm for the prediction, Acta Materialia, vol.145, pp.2187-2195, 1997.

N. Kanno, N. Takata, and M. Takeyama, «effect of grain boundary Laves phase on mechanical properties of Fe-20Cr-30Ni-2Nb, 2012.

J. F. Barker, Metal progress, p.72, 1962.

C. Richards, «Factors influencing the stability of nickel-base high-temperature alloys,» Superalloys, pp.1-25, 1968.

. Oridei-basile and . Radavich, «A current T-T-T diagram for Wrought alloy 718,» Superalloys 718,625 and Various Derivatives, pp.325-335, 1991.

C. Gandin, «Modeling of solidification: grain structures and segregations in metallic alloys,» comptes rendu physique, pp.216-225, 2010.