H. Bennett and J. Porteus, Relation Between Surface Roughness and Specular Reflectance at Normal Incidence, Journal of the Optical Society of America, vol.51, issue.2, pp.123-129, 1961.
DOI : 10.1364/JOSA.51.000123

E. Cserta, G. Hegedus, and R. Nemeth, EVOLUTION OF TEMPERATURE AND MOISTURE PROFILES OF WOOD EXPOSED TO INFRARED RADIATION, BioResources, vol.7, issue.4, pp.5304-5311, 2012.
DOI : 10.15376/biores.7.4.5304-5311

D. Santo and J. , Overview of rough surface scattering. Light scattering and nanoscale surface roughness, pp.211-235, 2007.

A. Dupleix, O. Ahmedou, S. Bleron, L. Rossi, F. Hughes et al., Rational production of veneer by IR-heating of green wood during peeling: Modeling experiments, Holzforschung, vol.67, issue.1, pp.53-58, 2013.
DOI : 10.1515/hf-2012-0005
URL : https://hal.archives-ouvertes.fr/hal-00844587

A. Dupleix, L. Denaud, L. Bleron, R. Marchal, and M. Hughes, Einfluss der Aufheiztemperatur des Rundholzes auf den Sch??lprozess und die Furnierqualit??t am Beispiel von Buche, Birke und Fichte, European Journal of Wood and Wood Products, vol.41, issue.11, pp.163-171, 2013.
DOI : 10.1007/s00107-012-0656-1

A. Dupleix, A. Kusiak, F. Rossi, and M. Hughes, Measuring the thermal properties of green wood by the transient plane source (TPS) technique, Holzforschung, vol.0, issue.0, pp.437-445, 2013.
DOI : 10.1515/hf-2012-0125
URL : https://hal.archives-ouvertes.fr/hal-00844672

E. Engelund, L. Thygesen, S. Svensson, and C. Hill, A critical discussion of the physics of wood???water interactions, Wood Science and Technology, vol.533, issue.2, pp.141-161, 2013.
DOI : 10.1007/s00226-012-0514-7

P. Hoffmeyer, E. Engelund, and L. Thygesen, Equilibrium moisture content (EMC) in Norway spruce during the first and second desorptions, Holzforschung, vol.65, issue.6, pp.875-882, 2011.
DOI : 10.1515/HF.2011.112

P. Jones, L. Schimleck, R. Daniels, A. Clark, and R. Purnell, Comparison of Pinus taeda L. wholetree wood property calibrations using diffuse reflectance near infrared spectra obtained using a variety of sampling options, Wood Sci Technol, vol.42, issue.5, pp.358-400, 2008.

F. Kollmann and W. Côté, Principles of wood science. I-Solid wood Heating of wood surface layers by infrared and microwave radiation, Berlin Makoviny I, Zemiar J Wood Res, vol.49, issue.4, pp.33-40, 1968.

R. Marchal, C. Gaudilliere, and R. Collet, Technical feasibility of an embedded wood heating device on the slicer or the peeling lathe, International symposium veneer processing and products proceedings, pp.29-44, 2004.

P. Navi and D. Sandberg, Thermo-hydro-mechanical processing of wood, pp.159-191, 2012.

M. Suchy, J. Virtanen, E. Kontturi, and T. Vuorinen, Impact of Drying on Wood Ultrastructure Observed by Deuterium Exchange and Photoacoustic FT-IR Spectroscopy, Biomacromolecules, vol.11, issue.2, pp.515-520, 2009.
DOI : 10.1021/bm901268j

S. Tsuchikawa, K. Hayashi, and S. Tsutsumi, Nondestructive Measurement of the Subsurface Structure of Biological Material Having Cellular Structure by Using Near-Infrared Spectroscopy, Applied Spectroscopy, vol.50, issue.9, pp.1117-1124, 1996.
DOI : 10.1366/0003702963905114

E. Zavarin, S. Jones, and L. Cool, Analysis of Solid Wood Surfaces by Diffuse Reflectance Infrared Fourier Transform (Drift) Spectroscopy, Journal of Wood Chemistry and Technology, vol.18, issue.4, pp.495-513, 1990.
DOI : 10.1366/0003702844554512

E. Zavarin, L. Cool, and S. Jones, Analysis of Solid Wood Surfaces by Internal Reflection Fourier Transform Infrared Spectroscopy (FTIR-IRS), Journal of Wood Chemistry and Technology, vol.70, issue.1, pp.41-56, 1991.
DOI : 10.1366/0003702804731131

A. Dupleix, A. Kusiak, M. Hughes, and F. Rossi, Measuring the thermal properties of green wood by the transient plane source (TPS) technique, Holzforschung, vol.0, issue.0, 2012.
DOI : 10.1515/hf-2012-0125
URL : https://hal.archives-ouvertes.fr/hal-00844672

R. Beluche and G. , Mod é lisation num é rique et d é veloppement d ' un syst è me exp é rimental de la diffusivit é et de la transmission infrarouge, Arts et Metiers ParisTech, p.2011

B. Bu-?-ar and A. Stra-?-e, Determination of the thermal conductivity of wood by the hot plate method: the influence of morphological properties of fir wood ( Abies alba Mill.) to the contact thermal resistance, Holzforschung, vol.62, pp.362-367, 2008.

A. Dupleix, S. A. Ould-ahmedou, L. Bleron, F. Rossi, and M. Hughes, Rational production of veneer by IR-heating of green wood during peeling: Modeling experiments, Holzforschung, vol.67, issue.1, 2012.
DOI : 10.1515/hf-2012-0005
URL : https://hal.archives-ouvertes.fr/hal-00844587

S. E. Gustafsson, Transient plane source techniques for thermal conductivity and thermal diffusivity measurements of solid materials, Review of Scientific Instruments, vol.62, issue.3, pp.797-804, 1991.
DOI : 10.1063/1.1142087

M. Gustavsson, J. S. Gustavsson, S. E. Gustafsson, and L. Halldahl, Recent developments and applications of the hot disk thermal constants analyser for measuring thermal transport properties of solids, High Temperatures-High Pressures, vol.32, issue.1, pp.47-52, 2000.
DOI : 10.1068/htwu259

T. Harada, T. Hata, and S. Ishihara, Thermal constants of wood during the heating process measured with the laser flash method, Journal of Wood Science, vol.40, issue.6, pp.425-431, 1998.
DOI : 10.1007/BF00833405

F. P. Incropera, T. L. Bergman, A. S. Lavine, and D. Dewitt, Thermal insulation ? determination of steady-state thermal resistance and related properties ? guarded hot plate apparatus, 1991.

D. Jia, M. T. Afzal, M. Gongc, and A. H. Bedane, Modeling of moisture diffusion and heat transfer during softening in wood densification, Int. J. Eng, vol.4, pp.191-200, 2010.

F. F. Kollmann and W. A. C-Ô-t-É, Principles of Wood Science. I ? Solid Wood, 1968.

A. Koumoutsakos, S. Avramidis, and S. G. Hatzikiriakos, RADIO FREQUENCY VACUUM DRYING OF WOOD. I. MATHEMATICAL MODEL, Drying Technology, vol.31, issue.1, pp.65-84, 2001.
DOI : 10.1515/hfsg.1992.46.5.449

W. Olek, J. Weres, and R. Guzenda, Effects of Thermal Conductivity Data on Accuracy of Modeling Heat Transfer in Wood, Holzforschung, vol.57, issue.3, pp.317-325, 2003.
DOI : 10.1515/HF.2003.047

A. Dupleix, Measuring thermal properties by Handbook of Heat Transfer Fundamentals, 1973.

J. Siau, Flow in Wood, 1971.

J. F. Siau and . Wood, Influence of Moisture on Physical Properties, 1995.

W. Simpson and A. Tenwolde, Physical properties and moisture relations of wood, Wood Handbook ? Wood as an Engineering Material, pp.15-20, 1999.

W. Sonderegger, S. Hering, and P. Niemz, Thermal behaviour of Norway spruce and European beech in and between the principal anatomical directions, Holzforschung, vol.65, issue.3, pp.369-375, 2011.
DOI : 10.1515/hf.2011.036

H. P. Steinhagen, Thermal Conductive Properties of Wood, Green or Dry, from -40 ° to + 100 ° C: A Literature Review, 1977.

B. M. Suleiman, J. Larfeldt, B. Leckner, and M. Gustavsson, Thermal conductivity and diffusivity of wood, Wood Science and Technology, vol.33, issue.6, pp.465-473, 1999.
DOI : 10.1007/s002260050130

R. Baldwin and R. F. , Plywood Manufacturing Practices, pp.62-78, 1975.

S. Bardet, J. Beauch-Ê-ne, and B. Thibaut, Influence of basic density and temperature on mechanical properties perpendicular to grain of ten wood tropical species, Annals of Forest Science, vol.60, issue.1, pp.49-59, 2003.
DOI : 10.1051/forest:2002073
URL : https://hal.archives-ouvertes.fr/hal-00883676

N. Bedard and B. Laganiere, Debarking enhancement of frozen logs. Part II: infrared system for heating logs prior to debarking. Forest Prod, J, vol.59, pp.25-30, 2009.

B. Buchelt and A. Pfriem, Infl uence of wood specimen thickness on its mechanical properties by tensile testing: solid wood versus veneer, Holzforschung, vol.65, pp.249-252, 2011.

N. Coste, Interest of radiant energy for wood peeling and slicing process, 2005.

A. Dupleix, R. Marchal, L. Bl-É-ron, F. Rossi, and M. Hughes, On-line heating temperatures of green-wood prior to peeling, Joint International Symposium on Wood Composites and Veneer Processing and Products Proceedings, 2011.

C. Gaudilliere, Contribution au d é veloppement d ' une chauffe é lectrique rapide de bois vert de Douglas en vue de son d é roulage, 2003.

S. V. Glass and S. L. Zelinka, Wood handbook, Chapter 03: Moisture relations and physical properties of wood, pp.3-4, 2010.

A. Kl-Ü-ppel and C. Mai, Effect of lignin and hemicelluloses on the tensile strength of micro-veneers determined at fi nite span and zero span, Holzforschung, vol.66, pp.493-496, 2012.

J. F. Lutz, Heating veneer bolts to improve quality of douglas-fi r plywood, 1960.

R. Marchal and R. Collet, Contribution au d é veloppement d ' une chauffe é lectrique rapide de bois vert de douglas en vue de son d é roulage, 2000.

R. Marchal, C. Gaudilliere, and R. Collet, Technical feasibility of an embedded wood heating device on the slicer or the peeling lathe, International Symposium Veneer Processing and Products Proceedings, pp.29-44, 2004.

R. Marchal, F. Mothe, L. Denaud, B. Thibaut, and L. Bleron, Cutting forces in wood machining ? Basics and applications in industrial processes. A review COST Action E35 Wood machining ? micromechanics and fracture, Holzforschung, vol.63, pp.157-167, 2004.
URL : https://hal.archives-ouvertes.fr/hal-01032121

M. Matsunaga and K. Minato, Physical and mechanical properties required for violin bow materials II: Comparison of the processing properties and durability between pernambuco and substitutable wood species, Journal of Wood Science, vol.22, issue.2, pp.142-146, 1998.
DOI : 10.1007/BF00526260

B. E. Potter and J. A. Andresen, A fi nite-difference model of temperatures and heat fl ow within a tree stem. Revue Canadienne de Recherche Foresti è re 32, pp.548-555, 2010.

O. Qu-É-m-É-ner, J. L. Battaglia, and A. Neveu, R é solution d ' un probl è me inverse par utilisation d ' un mod è le r é duit modal. Application au frottement d ' un pion sur un disque en rotation, Int. J. Thermal Sci, vol.42, pp.361-378, 2003.

G. Sinn, J. Sandak, and T. Ramananantoandro, Properties of wood surfaces ? characterisation and measurement. A review COST Action E35 Wood machining ? micromechanics and fracture, Holzforschung, vol.63, pp.196-203, 2004.

N. Srinivasan, D. Bhattacharyya, and K. Jayaraman, Thermoforming of wood veneer composite sheets, Holzforschung, vol.61, issue.5, pp.558-562, 2007.
DOI : 10.1515/HF.2007.105

S. Stanzl-tschegg and P. Navi, Fracture behaviour of wood and its composites. A review COST Action: Wood machining ? micromechanics and fracture, Holzforschung, vol.63, pp.139-149, 2004.

G. Torgovnikov and P. Vinden, Microwave wood modifi cation technology and its applications. Forest Prod, J, vol.60, p.173, 2010.

S. Yamauchi, Y. Iijima, and S. Doi, Spectrochemical characterization by FT-Raman spectroscopy of wood heat-treated at low temperatures: Japanese larch and beech, Journal of Wood Science, vol.46, issue.5, pp.498-506, 2005.
DOI : 10.1007/s10086-004-0691-6

R. Beck, J. V. St-clair, C. R. Blackwell, and B. , Inverse heat conduction, 1985.

T. Braham-bouchnak, G. Germain, A. Morel, and J. L. Lebrun, The influence of laser assistance on the machinability of the titanium alloy Ti555-3, The International Journal of Advanced Manufacturing Technology, vol.12, issue.1???2, pp.9-122471, 2013.
DOI : 10.1007/s00170-013-4855-7

N. Coste, D. Bevy, and T. , Interest of radiant energy for wood peeling and slicing process, 2005.

A. Dupleix, R. Marchal, L. Bléron, F. Rossi, and M. Hughes, On-line heating temperatures of green-wood prior to peeling, Joint International Symposium on Wood Composites and Veneer Processing and Products Proceedings, 2011.

A. Dupleix, S. A. Ahmedou, L. Bléron, F. Rossi, and M. Hughes, Rational production of veneer by IR-heating of green wood during peeling, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00844587

A. Dupleix, L. Denaud, L. Bléron, R. Marchal, and M. Hughes, Einfluss der Aufheiztemperatur des Rundholzes auf den Sch??lprozess und die Furnierqualit??t am Beispiel von Buche, Birke und Fichte, European Journal of Wood and Wood Products, vol.41, issue.11, pp.163-171, 2012.
DOI : 10.1007/s00107-012-0656-1

A. Dupleix, D. De-sousa-meneses, M. Hughes, and R. Marchal, Mid-infrared absorption properties of green wood, Wood Science and Technology, vol.11, issue.1, 2012.
DOI : 10.1007/s00226-013-0572-5
URL : https://hal.archives-ouvertes.fr/hal-00844551

A. Dupleix, A. Kusiak, M. Hughes, and F. Rossi, Measuring the thermal properties of green wood by the transient plane source (TPS) technique, Holzforschung, vol.0, issue.0, pp.437-445, 2012.
DOI : 10.1515/hf-2012-0125
URL : https://hal.archives-ouvertes.fr/hal-00844672

C. G. Grimhall and O. Hoel, Method of slicing veneer U.S. Patent No, p.614, 1983.

R. Marchal, C. Gaudillière, and R. Collet, Technical feasibility of an embedded wood heating device on the slicer or the peeling lathe, 1st International Symposium Veneer Processing and Products Proceedings, pp.29-44, 2004.

I. Makoviny and J. Zemiar, Heating of wood surface layers by infrared and microwave radiation, pp.33-40, 2004.

R. Rashid, R. A. Sun, S. Wang, G. Dargusch, and M. S. , The effect of laser power on the machinability of the Ti-6Cr-5Mo-5V-4Al beta titanium alloy during laser assisted machining, International Journal of Machine Tools and Manufacture, vol.63, pp.41-43, 2012.
DOI : 10.1016/j.ijmachtools.2012.07.006

B. M. Suleiman, J. Larfeldt, B. Leckner, and M. Gustavsson, Thermal conductivity and diffusivity of wood, Wood Science and Technology, vol.33, issue.6, pp.465-473, 1999.
DOI : 10.1007/s002260050130

J. Taler and P. Duda, Solving direct and inverse heat conduction problems, 2006.
DOI : 10.1007/978-3-540-33471-2