D. Tondeur, Optimisation thermodynamique, équipartition : exemples et applications, Techniques de l'Ingénieur BE, pp.8018-8019

E. L. Cuussler, Diffusion Mass Transfer in Fluid Systems, 1997.

A. Lallemand, Thermodynamique appliquée, premier principe, énergie, enthalpie, Techniques de l'Ingénieur BE, pp.8005-8006

H. Muslim, I. Dincer, and S. M. Zubair, Effect of reference state on exergy efficiencies of oneand two-stage oil distillation plants, International Journal of Thermal Sciences, 2004.

R. Rivero, Exergy simulation and optimisation of adiabatic and adiabatic binary distillation, Energy, pp.561-593, 2001.

G. De-koeiger and R. Rivero, Entropy production and exergy loss in experimental distillation columns, Chemical Engineering Science, vol.58, issue.8, pp.1587-1597, 2003.
DOI : 10.1016/S0009-2509(02)00627-9

R. L. Cornelissen and G. Hiesg, Exergy analysis of cryogenic air separation, Energy Conversion and Management, vol.39, issue.16-18, pp.1821-1826, 1998.
DOI : 10.1016/S0196-8904(98)00062-4

J. F. Salpetrier, Méthodes de calcul de colonnes de distillation -cas particulier d'une colonne non adiabatique Mémoire de DEA : Conversion de l'énergie, 1996.

A. Lallemand, Thermodynamique appliquée, Bilans entropiques et exergétiques, Techniques de l'Ingénieur BE, pp.8008-8009

R. Benelmir, A. Lallemand, and M. Feidt, Analyse exergétique, Techniques de l'Ingénieur BE, pp.8015-8016

O. Bolland, Power cycles with CO2 capture, 2004.

R. Rivero, C. Rendon, and S. Gallegos, Exergy and exergoeconomic analysis of a crude oil combined distillation unit, Energy, pp.1909-1927, 2004.

A. B. Araujo, R. P. Brito, and L. S. Vasconcelos, Exergetic analysis of distillation processes???A case study, Energy, vol.32, issue.7, pp.1185-1193, 2007.
DOI : 10.1016/j.energy.2006.07.003

M. A. Gadalla, Internal heat integrated distillation columns (iHIDiCs)???New systematic design methodology, Chemical Engineering Research and Design, vol.87, issue.12, pp.1658-1666, 2009.
DOI : 10.1016/j.cherd.2009.06.005

T. S. Ho, C. T. Huang, J. M. Lin, and L. S. Lee, Dynamic simulation for internally heat-integrated distillation columns (HIDiC) for propylene???propane system, Computers & Chemical Engineering, vol.33, issue.6, pp.1187-1201, 2009.
DOI : 10.1016/j.compchemeng.2009.01.004

P. S. Yong, H. M. Moon, and S. C. Yi, Exergy analysis of cryogenic air separation process for generating nitrogen, Journal of Industrial and Engineering Chemistry, vol.8, issue.6, pp.499-505, 2002.

P. , L. Goff, T. Cachot, and R. Rivero, Exergy analysis of distillation processes, Chemical Engineering Technology, vol.19, pp.478-486, 1996.

R. Agrawal and Z. T. Fidkowski, Are Thermally Coupled Distillation Columns Always Thermodynamically More Efficient for Ternary Distillations?, Industrial & Engineering Chemistry Research, vol.37, issue.8, pp.3444-3454, 1998.
DOI : 10.1021/ie980062m

Z. Olujic, A. B. Kamerbeek, and J. D. Graauw, A corrugation geometry based model for efficiency of structured distillation packing, Chemical Engineering and Processing: Process Intensification, vol.38, issue.4-6, pp.683-695, 1999.
DOI : 10.1016/S0255-2701(99)00068-9

P. Copigneaux, Distillation. Absorption ? Colonnes garnies, p.2626

J. A. Rocha, J. L. Bravo, and J. R. Fair, Distillation Columns Containing Structured Packings:?? A Comprehensive Model for Their Performance. 2. Mass-Transfer Model, Industrial & Engineering Chemistry Research, vol.35, issue.5, pp.1660-1667, 1996.
DOI : 10.1021/ie940406i

Z. Olujic, Compute friction factors fast for flow in pipes, Chemical Engineering, vol.88, issue.25, pp.91-93, 1981.

S. Ratheesh and A. Kannan, Holdup and pressure drop studies in structured packings with catalysts, Chemical Engineering Journal, vol.104, issue.1-3, pp.45-54, 2004.
DOI : 10.1016/j.cej.2004.08.004

G. F. Woerlee, J. Berends, Z. Olujic, and J. De-graauw, A comprehensive model for the pressure drop in vertical pipes and packed columns, Chemical Engineering Journal, vol.84, issue.3, pp.367-379, 2001.
DOI : 10.1016/S1385-8947(01)00132-2

J. Fernandes, P. F. Lisboa, P. C. Simões, J. P. Mota, and E. Saatdjian, Application of CFD in the study of supercritical fluid extraction with structured packing: Wet pressure drop calculations, The Journal of Supercritical Fluids, vol.50, issue.1, pp.61-68, 2009.
DOI : 10.1016/j.supflu.2009.04.009

C. G. Hernandez-gaona, J. C. Cardenas, J. G. Segovia-hernandez, S. Hernandez, and V. Rico-ramirez, Second law analysis of conventional and nonconventional distillation sequences, Chemical and Biochemical Engineering Quarterly, vol.19, pp.235-241, 2005.

C. R. Paiva and A. I. De-lacarda, Chemical process improvements by exergy analysis, th Mercosur Congress on Process Systems Engineering, 2005.

F. B. Petlyuk, V. M. Platonov, and D. M. Slavinskii, Thermodynamically optimal method for separating multi-component mixtures, International Chemical Engineering, vol.5, issue.3, pp.555-561, 1965.

A. Jimenez, N. Ramirez, A. Castro, and S. Hernandez, Design and Energy Performance of Alternative Schemes to the Petlyuk Distillation System, Chemical Engineering Research and Design, vol.81, issue.5, pp.518-524, 2003.
DOI : 10.1205/026387603765444474

S. Hernandez and J. Jimenez, Design of energy-efficient Petlyuk systems, Computers & Chemical Engineering, vol.23, issue.8, pp.1005-1010, 1999.
DOI : 10.1016/S0098-1354(99)00257-4

S. Hernandez and J. Jimenez, Design of optimal thermally-coupled distillation systems using a dynamic model, IChemE, 1996.

B. Ha and S. Ramon, Cryogenic distillation system for air separation, 2001.

E. S. Jimenez, P. Salamon, R. Rivero, C. C. Rendon, and K. H. Hoffmann, Optimal allocation of heat exchanger inventory in a serial type diabatic distillation column, Proceedings of ECOS, pp.179-187, 2004.

C. Dernane and A. Laouir, Etude comparative entre une distillation conventionnelle et une distillation diabatique, Revue des Energies Renouvelable CISM, pp.123-134, 2008.

A. K. Jana, Heat integrated distillation operation, Applied Energy, vol.87, issue.5, pp.1477-1494, 2010.
DOI : 10.1016/j.apenergy.2009.10.014

M. Hamdar, Design and optimization of an efficient indirect air-conditioning system for train carriages, pp.Mines-ParisTech, 2008.

A. Olujic, F. Fakhri, A. De-rijke, J. De-graauw, and P. J. Jansens, Internal heat integration - the key to an energy-conserving distillation column, Journal of Chemical Technology & Biotechnology, vol.61, issue.2-3, pp.241-248, 2003.
DOI : 10.1002/jctb.761

C. Linde, Device for production of oxygen-rich air, German Patent No, p.1885

H. Noda, T. Mukaida, M. Kaneda, K. Kataoka, and M. Nakaiwa, Internal column-to-column heat transfer characteristics for energy-saving distillation system, Symposium Series No

T. Nakanishi, K. Aso, T. Takamatsu, K. Matsuda, M. Nakaiwa et al., Method of design for packed column type HIDiC, Symposium Series No

K. Naito, M. Nakaiwa, K. Huang, A. Endo, K. Aso et al., Operation of a bench-scale ideal heat integrated distillation column (HIDiC): an experimental study, Computers & Chemical Engineering, vol.24, issue.2-7, pp.495-499, 2000.
DOI : 10.1016/S0098-1354(00)00513-5

J. A. Hugill and E. M. Van-dorst, Design of a heat-integrated distillation column based on a platefin heat exchanger, Proceedings of Sustainable Biochemical Process Technology, incorporating the 6 th International Conference on Process Intensification, pp.27-29

A. Appel-À-projet, C. Et-stockage-de, and C. , Formulaire de soumission, Document B, Contenu scientifique et technique [16] Communication personnelle avec C, 2007.

J. P. Moulin, D. Pareau, M. Rakib, M. Srambouli, and A. Isambert, Transfert de matière - Distillation compartimenté idéale

R. Rivero, Exergy simulation and optimization of adiabatic and diabatic binary distillation, Energy, pp.561-593, 2001.

. R. Md, N. E. Islam, J. C. Wijeysundera, and . Ho, Evaluation of heat and mass transfer coefficients for falling-films on tubular absorbers, International Journal of Refrigeration, vol.26, pp.197-204, 2003.

. R. Md, N. E. Islam, J. C. Wijeysundera, and . Ho, Simplified models for coupled heat and mass transfer in falling-film absorbers, International Journal of Heat and Mass Transfer, vol.47, pp.395-406, 2004.

M. K. Le-groff, S. J. Ormiston, and H. M. Soliman, Numerical solution of film condensation from turbulent flow of vapor???gas mixtures in vertical tubes, International Journal of Heat and Mass Transfer, vol.50, issue.19-20, pp.3899-3912, 2007.
DOI : 10.1016/j.ijheatmasstransfer.2007.02.012

W. A. Miller and M. Keyhani, The correlation of coupled heat and mass transfer experimental data for vertical falling film absorption, Proc. ASME Advanced Energy Systems Division, pp.177-187, 1999.

I. Fujita and E. Hihara, Heat and mass transfer coefficients of falling-film absorption process, International Journal of Heat and Mass Transfer, vol.48, issue.13, pp.2779-2786, 2005.
DOI : 10.1016/j.ijheatmasstransfer.2004.11.028

P. Trambouze and J. P. Euzen, Les réacteurs chimiques: de la conception à la mise en oeuvre, pp.267-279

M. Lallemand, Transferts en changement de phase ? Ebullition convective, p.8236

M. Hamdar, Design and optimization of an efficient indirect air-conditioning system for train carriages, Thèse de Mines-ParisTech, 2008.

D. Steiner and J. Taborek, Flow Boiling Heat Transfer in Vertical Tubes Correlated by an Asymptotic Model, Heat Transfer Engineering, vol.17, issue.2, pp.43-67, 1992.
DOI : 10.1016/0011-2275(74)90077-0

K. E. Gungor and R. H. Winterton, A general correlation for flow boiling in tubes and annuli, International Journal of Heat and Mass Transfer, vol.29, issue.3, pp.351-358, 1986.
DOI : 10.1016/0017-9310(86)90205-X

K. J. Bell and M. A. Ghaly, An approximate generalized design method for multi-component partial condensers, AIChE Symposium Series, vol.69, pp.72-79, 1973.

P. Copigneaux, Distillation. Absorption ? Colonnes garnies, p.2626

R. C. Reid, J. M. Prausbitz, and B. E. Poling, The properties of gases and liquids, Fourth Edition, pp.577-631

A. Zapke and D. G. Kröger, Countercurrent gas???liquid flow in inclined and vertical ducts ??? I: Flow patterns, pressure drop characteristics and flooding, International Journal of Multiphase Flow, vol.26, issue.9, pp.1439-1455, 2000.
DOI : 10.1016/S0301-9322(99)00097-X

M. Vijayan, S. Jayanti, and A. R. Balakrishnan, Experimental study of air???water countercurrent annular flow under post-flooding conditions, International Journal of Multiphase Flow, vol.28, issue.1, pp.51-67, 2002.
DOI : 10.1016/S0301-9322(01)00066-0

J. R. Thome and G. Ribatski, State-of-the-art of two-phase flow and flow boiling heat transfer and pressure drop of CO2 in macro- and micro-channels, International Journal of Refrigeration, vol.28, issue.8, pp.1149-1168, 2005.
DOI : 10.1016/j.ijrefrig.2005.07.005

L. Raynal and A. , A multi-scale approach for CFD calculations of gas???liquid flow within large size column equipped with structured packing, Chemical Engineering Science, vol.62, issue.24, pp.7196-7204, 2007.
DOI : 10.1016/j.ces.2007.08.010

A. Bontemps, Condensation de mélanges de vapeurs ? Transfert de chaleur et de masse, p.9910

G. B. Wallis, One-dimensional two-phase flow, 1969.

D. T. Hughes and T. R. Bott, Minimum thickness of a liquid film flowing down a vertical tube, International Journal of Heat and Mass Transfer, vol.41, issue.2, pp.253-260, 1998.
DOI : 10.1016/S0017-9310(97)00151-8

K. R. Morison, Q. A. Worth, and N. P. O-'dea, Minimum Wetting and Distribution Rates in Falling Film Evaporators, Food and Bioproducts Processing, vol.84, issue.4, 2006.
DOI : 10.1205/fbp06031

M. S. El-genk and H. H. Saber, Minimum thickness of a flowing down liquid film on a vertical surface, International Journal of Heat and Mass Transfer, vol.44, issue.15, pp.2809-2825, 2001.
DOI : 10.1016/S0017-9310(00)00326-4

. Kessler, Falling Film Evaporator, United States Patent, 1974.

D. E. Hartley and W. Murgatroyd, Criteria for the break-up of thin liquid layers flowing isothermally over solid surfaces, International Journal of Heat and Mass Transfer, vol.7, issue.9, pp.1003-1015, 1964.
DOI : 10.1016/0017-9310(64)90042-0

K. R. Morison, Q. A. Worth, and P. , Minimum Wetting and Distribution Rates in Falling Film Evaporators, Food and Bioproducts Processing, vol.84, issue.4, 2006.
DOI : 10.1205/fbp06031

M. S. Genk and H. H. Saber, Minimum thickness of a flowing down liquid film on a vertical surface, International Journal of Heat and Mass Transfer, vol.44, issue.15, pp.2809-2825, 2001.
DOI : 10.1016/S0017-9310(00)00326-4

T. Hobler, Minimum surface wetting, Chemia Stosow, vol.2, pp.145-159, 1964.

S. G. Bankoff, Minimum thickness of a draining liquid film, International Journal of Heat and Mass Transfer, vol.14, issue.12, pp.2143-2146, 1971.
DOI : 10.1016/0017-9310(71)90034-2

J. Mikielewicz and J. R. Moszynski, Minimum thickness of a liquid film flowing vertically down a solid surface, International Journal of Heat and Mass Transfer, vol.19, issue.7, pp.771-776, 1976.
DOI : 10.1016/0017-9310(76)90130-7

A. Doniec, Laminar flow of a liquid rivulet down a vertical solid surface, The Canadian Journal of Chemical Engineering, vol.45, issue.1, pp.198-202, 1991.
DOI : 10.1002/cjce.5450690123

N. D. Halbrook, Falling film condensing heat exchanger with liquid film heat transfer, United States Patent 5893410, 1999.

M. G. Kessler, K. E. Frank, and E. V. Laumann, Falling film evaporator, United States Patent, 1974.

J. P. Scheffers, Apparatus for the evaporation of liquids, United States Patent 3132064, 1960.

H. A. Bryan, Falling film heat exchanger, United States Patent 3437124, *g)*SqrtSqrt[R^2-(Rx )^2]&random=false [14] Handbook of porous media, 1967.

M. R. Nikou, Turbulence models application on CFD simulation of hydrodynamics, heat and mass transfer in structured packing, ICHMT, pp.1211-1219, 2008.

W. Said, Etude et modélisation des structures d'échanges des colonnes de distillation, Thèse de Doctorant de Mines-ParisTech, 2010.

C. L. Hsieh, N. Yeomen, and O. J. Berven, Method and apparatus to improve vapor distribution in mass transfer and heat exchange column, 1997.

L. G. Hackemesser, L. E. Cizmar, and R. S. Burlingame, Shell and tube heat exchanger with impingement distributor, United States Patent 5653282, 2007.

R. F. Barron, Cryogenic Heat Transfer, Series in Chemical and Mechanical Engineering, Copyright © 1999 Taylor and Francis [21] N.D. Halbrook, Falling film condensing heat exchanger with liquid film heat transfer, 1999.

M. R. Biar and C. J. Hammack, Vertical falling film shell and tube heat exchanger, United States Patent 6089312, 2000.

V. F. Allo and D. C. Stafford, Falling film heat exchanger with member to distribute liquid on external surfaces of tubes, 1985.

J. Jianlong, L. Xiangxun, and L. J. Huang, Refrigerant distributor for heat exchanger and heat exchanger, United States Patent Application Publication, 2010.

S. Wissmath, Flow distributor for a heat exchanger, United States Patent 4596287