H. Abuel-naga, D. Bergado, A. Bouazza, and G. Ramana, Volume change behaviour of saturated clays under drained heating conditions: experimental results and constitutive modeling, Canadian Geotechnical Journal, vol.44, issue.8, pp.4494-956, 2007.
DOI : 10.1139/t07-031

H. Abuel-naga, D. Bergado, A. Bouazza, and M. Pender, Thermomechanical model for saturated clays, G??otechnique, vol.59, issue.3, pp.273-278, 2009.
DOI : 10.1680/geot.2009.59.3.273

H. M. Abuel-naga, D. T. Bergado, and A. Bouazza, Thermally induced volume change and excess pore water pressure of soft Bangkok clay, Engineering Geology, vol.89, issue.1-2, pp.144-154, 2007.
DOI : 10.1016/j.enggeo.2006.10.002

A. Tabbaa and D. M. Wood, An experimentally based bubble model for clay, Proceedings of the 3rd International Symposium on Numerical Models in Geomechanics (NUMOG III), pp.90-99, 1989.

G. Baldi, M. Borsetto, T. Hueckel, and R. , Commission of the European Communities. Directorate-General for Science, and Development. Calibration of mathematical models for simulation of thermal, seepage and mechanical behaviour of Boom clay. Commission of the European Communities, Directorate-General Science, 1987.

G. Baldi, T. Hueckel, and R. Pellegrini, Thermal volume changes of the mineral???water system in low-porosity clay soils, Canadian Geotechnical Journal, vol.25, issue.4, pp.807-825, 1988.
DOI : 10.1139/t88-089

G. Baldi, T. Hueckel, A. Peano, and R. Pellegrini, Developments in modelling of thermo-hydro-geomechanical behaviour of boom clay and clay-based buffer materials. Commission of the European Communities, Nuclear Science and Technology, issue.2, pp.13365-13366, 1991.

J. Bardet, Bounding Surface Plasticity Model for Sands, Journal of Engineering Mechanics, vol.112, issue.11, pp.1198-1217, 1986.
DOI : 10.1061/(ASCE)0733-9399(1986)112:11(1198)

A. Basermann and P. Weidner, A parallel algorithm for determining all eigenvalues of large real symmetric tridiagonal matrices, Parallel Computing, vol.18, issue.10, pp.1129-1141, 1992.
DOI : 10.1016/0167-8191(92)90060-K

F. Bernier, G. Volckaert, E. Alonso, and M. Villar, Suction-controlled experiments on Boom clay, Engineering Geology, vol.47, issue.4, pp.325-338, 1997.
DOI : 10.1016/S0013-7952(96)00127-5

F. Bernier, X. L. Li, and W. Bastiaens, Twenty-five years' geotechnical observation and testing in the Tertiary Boom Clay formation, G??otechnique, vol.57, issue.2, pp.229-237, 2007.
DOI : 10.1680/geot.2007.57.2.229

F. Bernier, X. L. Li, W. Bastiaens, L. Ortiz, M. Van-geet et al., Fractures and self-healing within the excavation disturbed zone in clays (selfrac), p.22585, 2007.

R. I. Borja, Cam-Clay plasticity, Part II: Implicit integration of constitutive equation based on a nonlinear elastic stress predictor, Computer Methods in Applied Mechanics and Engineering, vol.88, issue.2, pp.225-240, 1991.
DOI : 10.1016/0045-7825(91)90256-6

R. I. Borja and S. R. Lee, Cam-Clay plasticity, Part 1: Implicit integration of elasto-plastic constitutive relations, Computer Methods in Applied Mechanics and Engineering, vol.78, issue.1, pp.49-72, 1990.
DOI : 10.1016/0045-7825(90)90152-C

R. Campanella and J. Mitchell, Influence of temperature variations on soil behavior, Journal of the Soil Mechanics and Foundations Division ASCE, vol.94, pp.709-734, 1968.

C. Cekerevac and L. Laloui, Experimental study of thermal effects on the mechanical behaviour of a clay, International Journal for Numerical and Analytical Methods in Geomechanics, vol.28, issue.3, pp.209-228, 2004.
DOI : 10.1002/nag.332

R. Charlier, Thermal impact on the damaged zone around a radioactive waste disposal in clay host rocks-deliverable d13 ? simulation of lab and in situ tests, 2011.

I. Collins and P. Kelly, A thermomechanical analysis of a family of soil models, G??otechnique, vol.52, issue.7, pp.507-518, 2002.
DOI : 10.1680/geot.2002.52.7.507

J. R. Cooper, Revised release on the iapws industrial formulation 1997 for the thermodynamic properties of water and steam. The International Association for the Properties of Water and Steam, pp.1-48, 2007.

Y. Cui, N. Sultan, and P. Delage, A thermomechanical model for saturated clays, Canadian Geotechnical Journal, vol.37, issue.3, pp.607-620, 2000.
DOI : 10.1139/t99-111
URL : https://hal.archives-ouvertes.fr/hal-01271310

Y. J. Cui and P. Delage, Yielding and plastic behaviour of an unsaturated compacted silt, G??otechnique, vol.46, issue.2, pp.291-311, 1996.
DOI : 10.1680/geot.1996.46.2.291

Y. Dafalias, Bounding Surface Plasticity. I: Mathematical Foundation and Hypoplasticity, Journal of Engineering Mechanics, vol.112, issue.9, pp.966-987, 1986.
DOI : 10.1061/(ASCE)0733-9399(1986)112:9(966)

Y. Dafalias and L. Herrmann, A bounding surface soil plasticity model, International Symposium on Soils under Cyclic and Transient Loading, pp.335-345, 1980.

Y. Dafalias and E. Popov, Ein Modell f???r Werkstoffe mit nichtlinearer Verfestigung unter zusammengesetzter Belastung, Acta Mechanica, vol.8, issue.3, pp.173-192, 1975.
DOI : 10.1007/BF01181053

C. , D. Olmo, V. Fioravante, F. Gera, T. Hueckel et al., Thermomechanical properties of deep argillaceous formations. Engineering geology, pp.87-102, 1996.

]. P. Delage, T. T. Le, A. M. Tang, Y. J. Cui, and X. L. Li, Suction effects in deep Boom Clay block samples, G??otechnique, vol.57, issue.2, pp.239-244, 2007.
DOI : 10.1680/geot.2007.57.2.239
URL : https://hal.archives-ouvertes.fr/hal-00204528

C. Delahaye and E. Alonso, Soil heterogeneity and preferential paths for gas migration. Engineering geology, pp.251-271, 2002.

B. Derjaguin, V. Karasev, and E. Khromova, Thermal expansion of water in fine pores, Journal of Colloid and Interface Science, vol.109, issue.2, pp.586-587, 1986.
DOI : 10.1016/0021-9797(86)90340-1

B. François, Thermo-plasticity of fine-grained soils at various saturation states: Application to nuclear waste disposal, 2008.

A. Gens, J. Vaunat, B. Garitte, and Y. Wileveau, In situ behaviour of a stiff layered clay subject to thermal loading: observations and interpretation, G??otechnique, vol.57, issue.2, pp.207-228, 2007.
DOI : 10.1680/geot.2007.57.2.207

S. Ghabezloo, J. Sulem, and J. Saint-marc, The effect of undrained heating on a fluid-saturated hardened cement paste, Cement and Concrete Research, vol.39, issue.1, pp.54-64, 2009.
DOI : 10.1016/j.cemconres.2008.09.004
URL : https://hal.archives-ouvertes.fr/hal-00327730

J. Graham, N. Tanaka, T. Crilly, and M. Alfaro, Modified Cam-Clay modelling of temperature effects in clays, Canadian Geotechnical Journal, vol.38, issue.3, pp.608-621, 2001.
DOI : 10.1139/t00-125

B. Hardin, The nature of stress-strain behavior for soils In Volume I of Earthquake Engineering and Soil Dynamics?Proceedings of the ASCE Geotechnical Engineering Division Specialty Conference, 1978.

P. Y. Hong, J. M. Pereira, Y. J. Cui, and A. M. Tang, Explicit integration of a thermo-mechanical model for clays, Computers and Geotechnics, vol.46, issue.0, pp.13-25, 2012.
DOI : 10.1016/j.compgeo.2012.05.016
URL : https://hal.archives-ouvertes.fr/hal-00780677

P. Y. Hong, J. M. Pereira, A. M. Tang, and Y. J. Cui, On some advanced thermomechanical models for saturated clays, International Journal for Numerical and Analytical Methods in Geomechanics, p.page
URL : https://hal.archives-ouvertes.fr/hal-00926922

S. Horseman, M. Winter, and D. Entwistle, Geotechnical characterization of boom clay in relation to the disposal of radioactive waste, 1987.

S. Horseman, M. Winter, and D. Entwisle, Triaxial experiments on boom clay, Enginnering Geology Special Publication, pp.35-35, 1993.

G. Houlsby and A. Puzrin, Principles of hyperplasticity: an approach to plasticity theory based on thermodynamic principles, 2006.

G. Houlsby and C. Wroth, The variation of shear modulus of a clay with pressure and overconsolidation ratio. Soils and Foundation, pp.138-143, 1991.

G. Houlsby, A. Amorosi, and E. Rojas, Elastic moduli of soils dependent on pressure: a hyperelastic formulation, G??otechnique, vol.55, issue.5, pp.383-392, 2005.
DOI : 10.1680/geot.2005.55.5.383

T. Hueckel and G. Baldi, Thermoplasticity of Saturated Clays: Experimental Constitutive Study, Journal of Geotechnical Engineering, vol.116, issue.12, pp.1778-1796, 1990.
DOI : 10.1061/(ASCE)0733-9410(1990)116:12(1778)

T. Hueckel and M. Borsetto, Thermoplasticity of Saturated Soils and Shales: Constitutive Equations, Journal of Geotechnical Engineering, vol.116, issue.12, pp.1765-1777, 1990.
DOI : 10.1061/(ASCE)0733-9410(1990)116:12(1765)

T. Hueckel and R. Pellegrini, Thermoplastic modeling of undrained failure of saturated clay due to heating., SOILS AND FOUNDATIONS, vol.31, issue.3, pp.1-16, 1991.
DOI : 10.3208/sandf1972.31.3_1

T. Hueckel, B. Francois, and L. Laloui, Explaining thermal failure in saturated clays, G??otechnique, vol.59, issue.3, pp.197-212, 2009.
DOI : 10.1680/geot.2009.59.3.197

J. Hujeux, Calcul numérique de problèmes de consolidation élastoplastique, 1979.

R. D. Krieg, A Practical Two Surface Plasticity Theory, Journal of Applied Mechanics, vol.42, issue.3, pp.641-646, 1975.
DOI : 10.1115/1.3423656

L. Laloui and C. Cekerevac, Thermo-plasticity of clays, Computers and Geotechnics, vol.30, issue.8, pp.649-660, 2003.
DOI : 10.1016/j.compgeo.2003.09.001

L. Laloui and F. , ACMEG-T: Soil Thermoplasticity Model, Journal of Engineering Mechanics, vol.135, issue.9, pp.932-944, 2009.
DOI : 10.1061/(ASCE)EM.1943-7889.0000011

T. Lê, Comportement thermo-hydro-mécanique de l'argile de boom, 2008.

X. L. Li, F. Bernier, T. Vietor, and P. Lebon, Thermal impact on the damaged zone around a radioactive waste disposal in clay host rocks-technical annex 1. Final report to EC (Contract Number, pp.6-2007, 2011.

P. Low, Nature and Properties of Water in Montmorillonite-Water Systems1, Soil Science Society of America Journal, vol.43, issue.4, pp.651-658, 1979.
DOI : 10.2136/sssaj1979.03615995004300040005x

G. Mcdowell and K. Hau, A generalised Modified Cam clay model for clay and sand incorporating kinematic hardening and bounding surface plasticity, Granular Matter, vol.6, issue.1, pp.11-16, 2004.
DOI : 10.1007/s10035-003-0152-8

D. Mctigue, Thermoelastic response of fluid-saturated porous rock, Journal of Geophysical Research, vol.78, issue.B9, pp.9533-9542, 1986.
DOI : 10.1029/JB091iB09p09533

R. Mitchell, On the yielding and mechanical strength of Leda clays, Canadian Geotechnical Journal, vol.7, issue.3, pp.297-312, 1970.
DOI : 10.1139/t70-036

M. Monfared, J. Sulem, P. Delage, and M. Mohajerani, On the THM behaviour of a sheared Boom clay sample: Application to the behaviour and sealing properties of the EDZ, Engineering Geology, vol.124, 2011.
DOI : 10.1016/j.enggeo.2011.10.002

Z. Mroz, V. Norris, and O. Zienkiewicz, Application of an anisotropic hardening model in the analysis of elasto???plastic deformation of soils, Kinematic hardening model for structured soil. Numerical Models in Geomechanics, pp.83-88, 1979.
DOI : 10.1680/geot.1979.29.1.1

N. Ondraf, Safety assessment and feasibility interim report (safir) 2, 2001.

D. Potts and L. Zdravkovi?, Finite element analysis in geotechnical engineering: theory, 1999.

D. Potts and L. Zdravkovic, Some pitfalls when using modified cam clay. Imperial College, 2000.

S. Rampello, G. Viggiani, and A. Amorosi, Small-strain stiffness of reconstituted clay compressed along constant triaxial effective stress ratio paths. Pre-Failure Deformation Behaviour of Geomaterials, p.89, 1998.

G. Ranjan and A. Rao, Basic and applied soil mechanics, New Age International, 2007.

J. Robinet, A. Rahbaoui, F. Plas, and P. Lebon, A constitutive thermomechanical model for saturated clays, Engineering Geology, vol.41, issue.1-4, pp.145-169, 1996.
DOI : 10.1016/0013-7952(95)00049-6

. Romero, Characterization and thermo-hydro-mechanical behaviour of unsaturated boom clay : an experimental study, 1999.

K. Roscoe and J. Burland, On the generalised stress-strain behaviour of " wet " clay, Engineering plasticity, pp.535-609, 1968.

M. Rouainia and D. Wood, A kinematic hardening constitutive model for natural clays with loss of structure, G??otechnique, vol.50, issue.2, pp.153-164, 2000.
DOI : 10.1680/geot.2000.50.2.153

A. Schofield and P. Wroth, Critical state soil mechanics, 1968.

H. Seneviratne, J. Carter, D. Airey, and J. Booker, A review of models for predicting the thermomechanical behaviour of soft clays, International Journal for Numerical and Analytical Methods in Geomechanics, vol.116, issue.10, pp.715-733, 1993.
DOI : 10.1002/nag.1610171004

D. Sheng, S. Sloan, A. Gens, and D. Smith, Finite element formulation and algorithms for unsaturated soils. Part I: Theory, International Journal for Numerical and Analytical Methods in Geomechanics, vol.24, issue.9, pp.745-765, 2003.
DOI : 10.1002/nag.295

D. Sheng, D. W. Smith, S. W. Sloan, and A. Gens, Finite element formulation and algorithms for unsaturated soils. Part II: Verification and application, International Journal for Numerical and Analytical Methods in Geomechanics, vol.27, issue.9, pp.767-790, 2003.
DOI : 10.1002/nag.296

A. Skempton, Effective Stress in Soils, Concrete and Rocks, Pore Pressure and Suction in Soils, pp.4-16, 1961.
DOI : 10.1680/sposm.02050.0014

S. Sloan, Substepping schemes for the numerical integration of elastoplastic stress-strain relations, International Journal for Numerical Methods in Engineering, vol.2, issue.5, pp.893-911, 1987.
DOI : 10.1002/nme.1620240505

S. Sloan, A. Abbo, and D. Sheng, Refined explicit integration of elastoplastic models with automatic error control, Engineering Computations, vol.18, issue.1/2, pp.121-154, 2001.
DOI : 10.1108/02644400110365842

P. Smith, D. Jardine, and . Hight, The yielding of Bothkennar clay, G??otechnique, vol.42, issue.2, pp.257-274, 1992.
DOI : 10.1680/geot.1992.42.2.257

W. T. Solowski and D. Gallipoli, Explicit stress integration with error control for the Barcelona Basic Model, Computers and Geotechnics, vol.37, issue.1-2, pp.59-67, 2010.
DOI : 10.1016/j.compgeo.2009.07.004

B. Spang, Excel add-in for properties of water and steam in si-units, 2002.

S. Stallebrass and R. Taylor, The development and evaluation of a constitutive model for the prediction of ground movements in overconsolidated clay, G??otechnique, vol.47, issue.2, pp.235-253, 1997.
DOI : 10.1680/geot.1997.47.2.235

N. Sultan, Etude du comportement thermo-mécanique de l'argile de boom: expériences et modélisation, 1997.

N. Sultan, P. Delage, and Y. Cui, Temperature effects on the volume change behaviour of Boom clay, Engineering Geology, vol.64, issue.2-3, pp.135-145, 2002.
DOI : 10.1016/S0013-7952(01)00143-0

F. Tavenas, S. Leroueil, P. L. Rochelle, and M. Roy, Creep behaviour of an undisturbed lightly overconsolidated clay, Canadian Geotechnical Journal, vol.15, issue.3, pp.402-423, 1978.
DOI : 10.1139/t78-037

F. Tavenas, J. Des-rosiers, S. Leroueil, P. L. Rochelle, and M. Roy, The use of strain energy as a yield and creep criterion for lightly overconsolidated clays, G??otechnique, vol.29, issue.3, pp.285-303, 1979.
DOI : 10.1680/geot.1979.29.3.285

K. Terzaghi, The shearing resistance of saturated soils and the angle between the planes of shear, Proceedings of the 1st International Conference on Soil Mechanics and Foundation Engineering, pp.54-56, 1936.

L. Van-cauteren, Instrumentation programme near the face of an advancing tunnel in boom clay. The Geotechnics of Hard Soils, p.953, 1998.

J. Vaunat, J. C. Cante, A. Ledesma, and A. Gens, A stress point algorithm for an elastoplastic model in unsaturated soils, International Journal of Plasticity, vol.16, issue.2, pp.121-141, 2000.
DOI : 10.1016/S0749-6419(99)00033-9

W. Wagner, J. Cooper, A. Dittmann, J. Kijima, H. Kretzschmar et al., The IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam, Proceedings of the International Conference on Soil Mechanics and Foundation Engineering, pp.150-182, 1997.
DOI : 10.1115/1.483186

S. Wheeler, A. Naatanen, M. Karstunen, and M. Lojander, An anisotropic elastoplastic model for soft clays, Canadian Geotechnical Journal, vol.40, issue.2, pp.403-418, 2003.
DOI : 10.1139/t02-119

D. Wood, Soil behaviour and critical state soil mechanics, 1990.
DOI : 10.1017/CBO9781139878272

D. Wood, Experimental Inspiration for Kinematic Hardening Soil Models, Journal of Engineering Mechanics, vol.130, issue.6, p.656, 2004.
DOI : 10.1061/(ASCE)0733-9399(2004)130:6(656)

H. S. Yu, C. Khong, and J. Wang, A unified plasticity model for cyclic behaviour of clay and sand, Mechanics Research Communications, vol.34, issue.2, pp.97-114, 2007.
DOI : 10.1016/j.mechrescom.2006.06.010

M. Zytynski, M. Randolph, R. Nova, and C. Wroth, On modelling the unloading-reloading behaviour of soils, International Journal for Numerical and Analytical Methods in Geomechanics, vol.34, issue.1, pp.87-93, 1978.
DOI : 10.1002/nag.1610020107