J. D. Almer, J. B. Cohen, and R. A. Winholtz, The effects of residual macrostresses and microstresses on fatigue crack propagation, Metallurgical and Materials Transactions A, vol.6, issue.8, pp.29-2127, 1998.
DOI : 10.1007/s11661-998-0038-9

C. Bathias, L. Drouillac, L. François, and P. , How and why the fatigue S???N curve does not approach a horizontal asymptote, International Journal of Fatigue, vol.23, pp.143-151, 2001.
DOI : 10.1016/S0142-1123(01)00123-2

C. Bathias and P. C. Paris, Gigacycle Fatigue in Mechanical Practice. Marcel Dekker, 270 Madison Avenue, 2005.

E. Bayraktar, I. M. Garçia, and C. B. , Failure mechanisms of automotive metallic alloys in very high cycle fatigue range, International Journal of Fatigue, vol.28, issue.11, pp.1590-1602, 2006.
DOI : 10.1016/j.ijfatigue.2005.09.019

M. Berveiller and A. Zaoui, An extension of the self-consistent scheme to plastically-flowing polycrystals, Journal of the Mechanics and Physics of Solids, vol.26, issue.5-6, pp.325-344, 1979.
DOI : 10.1016/0022-5096(78)90003-0

F. G. Caballero, C. Capdevila, and C. Garc?a-de-andre, Influence of scale parameters of pearlite on the kinetics of anisothermal pearlite-to-austenite transformation in a eutectoid steel, Scripta mater, pp.42-1159, 2001.
DOI : 10.1016/S1359-6462(00)00352-3

P. C. Chakraborti and M. K. Mitra, Microstructural response on the room temperature low cycle fatigue behaviour of two high strength duplex ferrite???martensite steels and a normalised ferrite???pearlite steel, International Journal of Fatigue, vol.28, issue.3, pp.194-202, 2006.
DOI : 10.1016/j.ijfatigue.2005.06.024

R. Dakhlaoui, M. R. Daymond, and H. G. Priesmeyer, Analyse du comportement mécanique des constituants d'un alliage polycristallin multiphasé par diffraction des rayons x et neutronique, ENSAM-Paris Elastoplastic deformation of ferritic steel and cementite studied by neutron diffraction and self-consistent modelling, Acta Materialia, vol.50, pp.1613-1626, 2002.

M. Dollar, I. M. Bernsten, M. Daeubler, and . W. Thompson-a, The effect of cyclic loading on the dislocation structure of fully pearlitic steel, Metallurgical Transactions A, vol.6, issue.3, pp.447-451, 1989.
DOI : 10.1007/BF02653924

M. Dollar, M. Berveiller, and A. W. Thompson, Influence of deformation substructure on flow and fracture of fully pearlitic steel, Acta Metallurgica, vol.36, issue.2, pp.311-320, 1988.
DOI : 10.1016/0001-6160(88)90008-9

A. M. Elwazri, P. Wanjara, and S. Yuea, The effect of microstructural characteristics of pearlite on the mechanical properties of hypereutectoid steel, Materials Science and Engineering: A, vol.404, issue.1-2, pp.91-98, 2005.
DOI : 10.1016/j.msea.2005.05.051

J. D. Eshelby, The Determination of the Elastic Field of an Ellipsoidal Inclusion, and Related Problems, Proc. R. Soc., A241, pp.376-396, 1957.

P. Franciosi, M. Berveiller, and A. Zaoui, Latent hardening in copper and aluminium single crystals, Acta Metallurgica, vol.28, issue.3, pp.273-283, 1980.
DOI : 10.1016/0001-6160(80)90162-5

I. García, D. Montiel, and B. Bathias, Fatigue life assessment of high-strengh, low alloy steel at high frequency, The Arabian Journal for Science and Engineering, vol.33, pp.237-247, 2007.

G. T. Gray, A. W. Thompson, and J. C. Williams, Influence of microstructure on fatigue crack initiation in fully pearlitic steels, Metallurgical Transactions A, vol.29, issue.5, pp.753-760, 1985.
DOI : 10.1007/BF02814826

S. Hamadaa, D. Sasakib, M. Uedac, and U. Noguchia, Fatigue limit evaluation considering crack initiation for lamellar pearlitic steel, Procedia Engineering, vol.10, pp.1467-1472, 2011.
DOI : 10.1016/j.proeng.2011.04.245

P. T. Heald, T. C. Lindley, and C. E. Richards, The influence of stress intensity and microstructure on fatigue crack propagation in a 1% carbon steel, Materials Science and Engineering, vol.10, pp.235-240, 1972.
DOI : 10.1016/0025-5416(72)90094-8

P. Houin, A. Simon, and G. Beck, Relationship between structure and mechanical properties of pearlite between 0.2% and 0.8%C., Transactions of the Iron and Steel Institute of Japan, vol.21, issue.10, pp.726-731, 1981.
DOI : 10.2355/isijinternational1966.21.726

P. R. Howell, The Pearlite Reaction in Steels Mechanisms and Crystallography, Materials Characterization, vol.40, issue.4-5, pp.227-260, 1998.
DOI : 10.1016/S1044-5803(98)00024-2

J. W. Hutchinson, Plastic stress-strain relations of F.C.C polycrystalline metals hardening according to Taylor's rule, Journal of the Mechanics and Physics of Solids, vol.12, issue.1, pp.11-24, 1964.
DOI : 10.1016/0022-5096(64)90003-1

J. M. Hyzak and I. M. Bernstein, The role of microstructure on the strength and toughness of fully pearlitic steels, Metallurgical Transactions A, vol.333, issue.8, pp.7-1217, 1976.
DOI : 10.1007/BF02656606

K. Inal, J. L. Lebrun, and M. Belassel, Second-order stresses and strains in heterogeneous steels: Self-consistent modeling and X-ray diffraction analysis, Metallurgical and Materials Transactions A, vol.404, issue.407, pp.2361-2369, 2004.
DOI : 10.1007/s11661-006-0216-6

T. Iwakuma and S. Nemat-nasscr, Finite Elastic-Plastic Deformation of Polycrystalline Metals, Proc. R. Soc. Lond, A394, pp.87-119, 1984.
DOI : 10.1098/rspa.1984.0071

A. Kanie, Y. Tomota, S. Torii, and T. Kamiyama, Elastic Strains of Cementite in a Pearlite Steel during Tensile Deformation Measured by Neutron Diffraction, ISIJ International, vol.44, issue.11, pp.44-1952, 2004.
DOI : 10.2355/isijinternational.44.1952

M. Kazeminezhad, K. Taheri, and A. , The effect of controlled cooling after hot rolling on the mechanical properties of a commercial high carbon steel wire rod, Materials & Design, vol.24, issue.6, pp.415-421, 2003.
DOI : 10.1016/S0261-3069(03)00095-5

T. A. Khalifa, Effect of inclusions on the fatigue limit of a heat-treated carbon steel, Materials Science and Engineering: A, vol.102, issue.2, pp.175-180, 1988.
DOI : 10.1016/0025-5416(88)90572-1

M. Koster, G. Wagner, and D. Eifler, Cyclic deformation behavior of a medium carbon steel in the VHCF regime, Procedia Engineering, vol.2, issue.1, pp.2189-2197, 2010.
DOI : 10.1016/j.proeng.2010.03.235

G. Langford, Deformation of pearlite, Metallurgical Transactions A, vol.211, issue.6, pp.861-875, 1977.
DOI : 10.1007/BF02661567

C. Lei, G. Masahide, H. Yoshiaki, H. Yukio, and Y. Lin, Characterization of Deformability of Spheroidal Cementite by Residual Stress Measurement, Journal of Materials Engineering and Performance, vol.17, pp.445-453, 2008.

F. Li and H. Huang, Analysis on the deformation and fracture behavior of carbon steel by in situ tensile test, Journal of University of Science and Technology Beijing, Mineral, Metallurgy, Material, vol.13, issue.6, pp.13-19, 2006.
DOI : 10.1016/S1005-8850(06)60102-3

S. Li, T. H. Yip, R. V. Ramanujan, and M. H. Liang, Insitu TEM studies of the mechanisms of crack nucleation and propagation in fully lamellar microstructures, Materials Science and Technology, vol.208, issue.7, pp.902-906, 2003.
DOI : 10.1016/0001-6160(63)90063-4

P. Lipinski and B. Berveiller, Elastoplasticity of micro-inhomogeneous metals at large strains, International Journal of Plasticity, vol.5, issue.2, pp.149-172, 1989.
DOI : 10.1016/0749-6419(89)90027-2

P. Lipinski, M. Berveiller, E. Reuberz, and J. Morreale, Transition theories of elastic-plastic deformation of metallic polycrystals, Archive of Applied Mechanics, vol.17, issue.5, pp.291-311, 1995.
DOI : 10.1007/BF00789222

A. R. Marder and B. L. Bramfitt, The effect of morphology on the strength of pearlite, Metallurgical Transactions A, vol.61, issue.3, pp.365-372, 1976.
DOI : 10.1007/BF02642832

A. R. Marder and B. L. Bramfitt, Effect of continuous cooling on the morphology and kinetics of pearlite, Effect of Continuous Cooling on the Morphology and Kinetics of Pearlite, pp.2009-2014, 1975.
DOI : 10.1016/0001-6160(58)90051-8

S. R. Mediratta, V. Ramaswamy, V. Singh, R. Rao, and P. , Low cycle fatigue of dual f:nase steels produced by different cooling rates and a ferrite-pearlite steel. Scripta metallurgica et materialia, pp.793-797, 1990.

A. Molinari, G. Canova, and S. Ahzi, A self consistent approach of the large deformation polycrystal viscoplasticity Acta Metallurgica, pp.2983-2994, 1987.

A. Paquin, Modélisation micromécanique du comportement élastoviscoplastique de matériaux hétérogènes, Thèse de l'Université de Metz, [Per 1993] Perez-Unzueta A, Microstructure and wear resistance of pearlitic rail steels. Wear, pp.162-164, 1993.

R. Pesci, Etude micromécanique et caractérisation expérimentale du comportement et de l'endommagement de l'acier de cuve 16MND5 à basses températures, Thèse de doctorat, Arts et Métiers ParisTech, 2004.

N. Phung, Fatigue sous très faibles amplitudes de contrainte : Analyse multiéchelle des premiers mécanismes irréversibles Thèse de doctorat, ENSAM-Paris, [Sac, Zurabteilung einer fleissbedingun. Zeit. Der V.D.I, 72, p.739, 1928.

S. Sankaran, S. V. Subramanya, and K. A. Padmanabhan, Low cycle fatigue behavior of a multiphase microalloyed medium carbon steel: comparison between ferrite???pearlite and quenched and tempered microstructures, Materials Science and Engineering: A, vol.345, issue.1-2, pp.328-335, 2003.
DOI : 10.1016/S0921-5093(02)00511-7

V. S. Sarma and K. A. Padmanabhan, Low cycle fatigue behaviour of a medium carbon microalloyed steel, International Journal of Fatigue, vol.19, issue.2, pp.135-140, 1997.
DOI : 10.1016/S0142-1123(96)00060-6

C. Schmitt, P. Lipinski, and M. Berveiller, Micromechanical modelling of the elastoplastic behavior of polycrystals containing precipitates??? Application to hypo- and hyper-eutectoid steels, International Journal of Plasticity, vol.13, issue.3, pp.183-199, 1997.
DOI : 10.1016/S0749-6419(95)00007-0

T. Shinozaki, S. Morooka, T. Suzuki, Y. Tomota, and T. Kamiyama, Influence of Lamellar Spacing on Deformation Behavior of Pearlite Steels Studied by In Situ Neutron Diffraction, The 3rd International Conference on Advanced Structural Steels, 2006.

C. R. Sohar, A. Betzwar-kotas, C. Gierl, B. Weiss, and H. Danninger, Gigacycle fatigue behavior of a high chromium alloyed cold work tool steel, International Journal of Fatigue, vol.30, issue.7, pp.1137-1149, 2008.
DOI : 10.1016/j.ijfatigue.2007.09.012

J. Tarasiuk, K. Wierbanowski, and . Kuznierz, Some Model Predictions for Plastically Deformed Polycrystalline Copper, Archives of Metallurgy, Arch. Metall, vol.38, pp.33-47, 1993.

Y. Tomota, P. Lukas, D. Neov, S. Harjo, and Y. R. Abe, In situ neutron diffraction during tensile deformation of a ferrite-cementite steel, Acta Materialia, vol.51, issue.3, pp.51-805, 2003.
DOI : 10.1016/S1359-6454(02)00472-X

Y. Tomota, T. Suzuki, A. Kanie, Y. Shiota, M. Uno et al., In situ neutron diffraction of heavily drawn steel wires with ultra-high strength under tensile loading, Acta Materialia, vol.53, issue.2, pp.463-467, 2005.
DOI : 10.1016/j.actamat.2004.10.003

H. P. Van, On the equivalence of the relaxed Taylor theory and the Bishop Hill theory for partially constrained plastic deformation of crystals, Mat. Sci. Eng, vol.55, p.69, 1982.

V. Wagner, P. Starke, E. Kerscher, and D. Eifler, Cyclic deformation behaviour of railway wheel steels in the very high cycle fatigue (VHCF) regime, International Journal of Fatigue, vol.33, issue.1, pp.69-74, 2011.
DOI : 10.1016/j.ijfatigue.2010.07.010

K. Wierzbanowski, J. Jura, W. G. Haije, and R. B. Helmholdt, FCC Rolling Texture Transitions in Relation to Constraint Relaxation, Cryst. Res. Technol, pp.27-513, 1992.