]. S. Barbouchi-2007, V. Barbouchi, A. Bellenger, P. Tcharkhtchi, T. Castaing et al., Effect of water on the fatigue behaviour of a pa66/glass fibers composite material, Journal of Materials Science, vol.46, issue.23, pp.2181-2188, 2007.
DOI : 10.1007/s10853-006-1011-x

]. S. Barré and M. L. Benzeggagh, On the use of acoustic emission to investigate damage mechanisms in glass-fibre-reinforced polypropylene, Composites Science and Technology, vol.52, issue.3, pp.369-376, 1994.
DOI : 10.1016/0266-3538(94)90171-6

B. Cheikh-larbi, ]. A. Ben-cheikh-larbi, K. Sai, H. Sidhom, and D. Baptiste, Constitutive Model of Micromechanical Damage to Predict Reduction in Stiffness of a Fatigued SMC Composite, Journal of Materials Engineering and Performance, vol.15, issue.5, pp.575-580, 2006.
DOI : 10.1361/105994906X124569

]. A. Bergeret, I. Pires, M. P. Foulc, B. Abadie, L. Ferry et al., The hygrothermal behaviour of glass-fibre-reinforced thermoplastic composites: a prediction of the composite lifetime, Polymer Testing, vol.20, issue.7, pp.753-763, 2001.
DOI : 10.1016/S0142-9418(01)00030-7

L. Bergeret, P. Ferry, and . Ienny, Influence of the fibre/matrix interface on ageing mechanisms of glass fibre reinforced thermoplastic composites (PA-6,6, PET, PBT) in a hygrothermal environment, Polymer Degradation and Stability, vol.94, issue.9, pp.1315-1324, 2009.
DOI : 10.1016/j.polymdegradstab.2009.04.009

]. A. Bernasconi, P. Davoli, A. Basile, and . Filippi, Effect of fibre orientation on the fatigue behaviour of a short glass fibre reinforced polyamide-6, International Journal of Fatigue, vol.29, issue.2, pp.199-208, 2007.
DOI : 10.1016/j.ijfatigue.2006.04.001

A. Bernasconi, F. Cosmi, and D. Dreossi, Local anisotropy analysis of injection moulded fibre reinforced polymer composites, Composites Science and Technology, vol.68, issue.12, pp.2574-2581, 2008.
DOI : 10.1016/j.compscitech.2008.05.022

URL : https://hal.archives-ouvertes.fr/hal-00509047

]. A. Bernasconi and R. M. Kulin, Effect of frequency upon fatigue strength of a short glass fiber reinforced polyamide 6: A superposition method based on cyclic creep parameters, Polymer Composites, vol.23, issue.2, pp.154-161, 2009.
DOI : 10.1002/pc.20543

A. Bernasconi, F. Cosmi, and P. J. Hine, Analysis of fibre orientation distribution in short fibre reinforced polymers: A comparison between optical and tomographic methods, Composites Science and Technology, vol.72, issue.16, pp.2002-2008, 2012.
DOI : 10.1016/j.compscitech.2012.08.018

. Bohse, Acoustic emission characteristics of micro-failure processes in polymer blends and composites, Composites Science and Technology, vol.60, issue.8, pp.1213-1226, 2000.
DOI : 10.1016/S0266-3538(00)00060-9

G. Ausias, M. Lebrun, C. Tachon, and . Baley, Observation of the structure of a composite polypropylene/flax and damage mechanisms under stress, Industrial Crops and Products, vol.43, pp.225-236, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00985158

]. W. Bradley and T. S. Grant, The effect of the moisture absorption on the interfacial strength of polymeric matrix composites, Journal of Materials Science, vol.9, issue.21, pp.5537-5542, 1995.
DOI : 10.1007/BF00351570

]. Buffière, . Maire, G. Cloetens, R. Lormand, and . Fougères, Characterization of internal damage in a MMCp using X-ray synchrotron phase contrast microtomography, Acta Materialia, vol.47, issue.5, pp.1613-1625, 1999.
DOI : 10.1016/S1359-6454(99)00024-5

]. D. Bull, L. Helfen, I. Sinclair, S. M. Spearing, and T. Baumbach, A comparison of multi-scale 3D X-ray tomographic inspection techniques for assessing carbon fibre composite impact damage, Composites Science and Technology, vol.75, pp.55-61, 2013.
DOI : 10.1016/j.compscitech.2012.12.006

. Carmona, Étude de l'endommagement de matériaux composites par tomographie X et émission acoustique, pp.50-51, 2009.

J. A. Carrascal, J. A. Casado, F. Polanco, and . Gutiérrez-solana, Absorption and diffusion of humidity in fiberglass-reinforced polyamide, Polymer Composites, vol.36, issue.5, pp.580-586, 2005.
DOI : 10.1002/pc.20134

F. Ja-casado, J. A. Gutiérrez-solana, I. Polanco, and . Carrascal, The assessment of fatigue damage on short-fiber-glass reinforced polyamides (PA) through the surface roughness evolution, Polymer Composites, vol.23, issue.4, pp.349-359, 2006.
DOI : 10.1002/pc.20192

C. and S. Roy, Plastics Technology Handbook, pp.79-80, 2007.

]. C. Chateau, L. Gélébart, M. Bornert, J. Crépin, E. Boller et al., In situ X-ray microtomography characterization of damage in SiCf/SiC minicomposites, Composites Science and Technology, vol.71, issue.6, pp.916-924, 2011.
DOI : 10.1016/j.compscitech.2011.02.008

]. Chung and T. Kwon, Fiber orientation in the processing of polymer composites, Korea-Australia Rheology Journal, vol.14, issue.4, pp.175-188, 2002.

A. R. Clarke, G. Archenhold, and N. C. Davidson, A novel technique for determining the 3D spatial distribution of glass fibres in polymer composites, Composites Science and Technology, vol.55, issue.1, pp.75-91, 1995.
DOI : 10.1016/0266-3538(95)00087-9

]. F. Cosmi and A. Bernasconi, Micro-CT investigation on fatigue damage evolution in short fibre reinforced polymers, Composites Science and Technology, vol.79, issue.118, pp.70-76, 2013.
DOI : 10.1016/j.compscitech.2013.02.008

]. A. Cunha and S. Fakirov, Structure development during polymer processing, Nato Science Series, 2000.
DOI : 10.1007/978-94-011-4138-3

D. Dally and . Carrillo, Fatigue behavior of glass-fiber fortified thermoplastics, Polymer Engineering and Science, vol.23, issue.6, pp.434-444, 1969.
DOI : 10.1002/pen.760090610

D. Monte-2010a-]-m, E. De-monte, M. Moosbrugger, and . Quaresimin, Influence of temperature and thickness on the off-axis behaviour of short glass fibre reinforced polyamide 6.6 ??? cyclic loading, Composites Part A: Applied Science and Manufacturing, vol.41, issue.10, pp.1368-1379, 2010.
DOI : 10.1016/j.compositesa.2010.02.004

D. Monte-2010b-]-m, E. De-monte, M. Moosbrugger, and . Quaresimin, Influence of temperature and thickness on the off-axis behaviour of short glass fibre reinforced polyamide 6.6 ??? Quasi-static loading, Composites Part A: Applied Science and Manufacturing, vol.41, issue.7, pp.859-871, 2010.
DOI : 10.1016/j.compositesa.2010.02.018

N. Despringre, Y. Chemisky, M. F. Arif, G. Robert, and F. Meraghni, Multi-scale viscoelastic damage model of short glass fiber reinforced polyamide- 66 under highcycle fatigue, 16th European Conference on Composite Materials (Accepted), 2014.

F. Desrumaux, M. Meraghni, and . Benzeggagh, Micromechanical modelling coupled to a reliability approach for damage evolution prediction in composite materials, Applied Composite Materials, vol.7, issue.4, pp.231-250, 2000.
DOI : 10.1023/A:1008959400978

. Dray, Prédiction des propriétés thermo-élastiques d'un composite injecté et chargé de fibres courtes, 2006.

]. Dwight, Glass fiber reinforcements. Comprehensive composite materials, pp.231-261, 2000.
DOI : 10.1016/b978-0-12-803581-8.03812-1

]. Eberhardt and A. Clarke, Fibre-orientation measurements in short-glass-fibre composites. Part I: automated, high-angular-resolution measurement by confocal microscopy, Composites Science and Technology, vol.61, issue.10, pp.1389-1400, 2001.
DOI : 10.1016/S0266-3538(01)00038-0

]. Eberhardt and . Clarke, Automated reconstruction of curvilinear fibres from 3D datasets acquired by X-ray microtomography, Journal of Microscopy, vol.206, issue.1, pp.41-53, 2002.
DOI : 10.1046/j.1365-2818.2002.01009.x

J. Esmaeillou, . Fitoussi, A. Lucas, and . Tcharkhtchi, Multi-scale experimental analysis of the tension-tension fatigue behavior of a short glass fiber reinforced polyamide composite, Procedia Engineering, vol.10, issue.116, pp.2117-2122, 2011.
DOI : 10.1016/j.proeng.2011.04.350

. Esmaeillou, V. Fereirra, A. Bellenger, and . Tcharkhtchi, Fatigue damage initiation of a PA66/glass fibers composite material, Journal of Applied Polymer Science, vol.24, issue.5, pp.4007-4014, 2012.
DOI : 10.1002/app.36728

URL : https://hal.archives-ouvertes.fr/hal-01202706

. Esmaeillou, V. Ferreira, A. Bellenger, and . Tcharkhtchi, Fatigue behavior of polyamide 66/glass fiber under various kinds of applied load, Polymer Composites, vol.28, issue.53, pp.540-547, 2012.
DOI : 10.1002/pc.22185

URL : https://hal.archives-ouvertes.fr/hal-01202696

J. Fitoussi, M. Bocquet, and F. Meraghni, Effect of the matrix behavior on the damage of ethylene???propylene glass fiber reinforced composite subjected to high strain rate tension, Composites Part B: Engineering, vol.45, issue.1, pp.1181-1191, 2013.
DOI : 10.1016/j.compositesb.2012.06.011

URL : https://hal.archives-ouvertes.fr/hal-00984755

. Gautier, V. Mortaigne, and . Bellenger, Interface damage study of hydrothermally aged glass-fibre-reinforced polyester composites, Composites Science and Technology, vol.59, issue.16, pp.2329-2337, 1999.
DOI : 10.1016/S0266-3538(99)00085-8

S. Günzel, S. Hickmann, C. Wittemeyer, and V. Trappe, Effects of Fiber Orientation and Moisture on the Crack Growth in Short Glass Fiber Reinforced Polyamide, Advanced Engineering Materials, vol.4, issue.10, pp.867-872, 2012.
DOI : 10.1002/adem.201100337

]. A. Hassan, N. M. Salleh, R. Yahya, and M. R. Sheikh, Fiber length, thermal, mechanical, and dynamic mechanical properties of injection-molded glass-fiber/polyamide 6,6: plasticization effect, Journal of Reinforced Plastics and Composites, vol.30, issue.6, pp.488-498, 2011.
DOI : 10.1177/0731684410397898

A. Hassan, A. Normasmira, R. Rahman, and . Yahya, Moisture absorption effect on thermal, dynamic mechanical and mechanical properties of injection-molded short glass-fiber/polyamide 6,6 composites. Fibers and Polymers, pp.899-906, 2012.

]. J. Horst and J. L. Spoormaker, Mechanisms of fatigue in short glass fiber reinforced polyamide 6, Polymer Engineering & Science, vol.13, issue.22, pp.2718-2726, 1996.
DOI : 10.1002/pen.10671

]. J. Horst-1997a and . Horst, Influence of fibre orientation on fatigue of short glassfibre reinforced Polyamide, 1997.

]. J. Horst-1997b, J. L. Horst, and . Spoormaker, Fatigue fracture mechanisms and fractography of short-glassfibre-reinforced polyamide 6, Journal of Materials Science, vol.32, issue.14, pp.3641-3651, 1997.
DOI : 10.1023/A:1018634530869

A. Hosokawa, D. S. Wilkinson, J. Kang, M. Kobayashi, and H. Toda, Void growth and coalescence in model materials investigated by high-resolution X-ray microtomography, International Journal of Fracture, vol.56, issue.12, pp.51-66, 2013.
DOI : 10.1007/s10704-013-9820-9

]. W. Hufenbach, R. Böhm, M. Gude, M. Berthel, A. Hornig et al., A test device for damage characterisation of composites based on in situ computed tomography, Composites Science and Technology, vol.72, issue.12, pp.1361-1367, 2012.
DOI : 10.1016/j.compscitech.2012.05.007

]. A. Isaac, F. Sket, W. Reimers, B. Camin, G. Sauthoff et al., In situ 3D quantification of the evolution of creep cavity size, shape, and spatial orientation using synchrotron X-ray tomography, Materials Science and Engineering: A, vol.478, issue.1-2, pp.108-118, 2008.
DOI : 10.1016/j.msea.2007.05.108

]. G. Jeffery, The Motion of Ellipsoidal Particles Immersed in a Viscous Fluid, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.102, issue.715, pp.161-179, 1922.
DOI : 10.1098/rspa.1922.0078

]. L. Jegou, Caractérisation rapide des propriétés en fatigue d'un polymère renforcé par des fibres courtes, pour une application automobile, 0118.

]. S. Kammoun, Micromechanical modeling of the progressive failure in short glass-fiber reinforced thermoplastics, 2011.

]. S. Kammoun, I. Doghri, L. Adam, G. Robert, and L. Delannay, First pseudo-grain failure model for inelastic composites with misaligned short fibers, Composites Part A: Applied Science and Manufacturing, vol.42, issue.12, pp.1892-1902, 2011.
DOI : 10.1016/j.compositesa.2011.08.013

]. B. Klimkeit, S. Castagnet, Y. Nadot, A. Habib, G. Benoit et al., Fatigue damage mechanisms in short fiber reinforced PBT+PET GF30, Materials Science and Engineering: A, vol.528, issue.3, pp.1577-1588, 2011.
DOI : 10.1016/j.msea.2010.10.081

L. Ladeveze and . Dantec, Damage modelling of the elementary ply for laminated composites, Composites Science and Technology, vol.43, issue.3, pp.257-267, 1992.
DOI : 10.1016/0266-3538(92)90097-M

]. L. Laiarinandrasana, T. F. Morgeneyer, H. Proudhon, and C. Regrain, Damage of semicrystalline polyamide 6 assessed by 3D X-ray tomography: From microstructural evolution to constitutive modeling, Journal of Polymer Science Part B: Polymer Physics, vol.38, issue.13, pp.1516-1525, 2010.
DOI : 10.1002/polb.22043

URL : https://hal.archives-ouvertes.fr/hal-00509794

]. J. Lambert, A. R. Chambers, I. Sinclair, and S. M. Spearing, 3D damage characterisation and the role of voids in the fatigue of wind turbine blade materials, Composites Science and Technology, vol.72, issue.2, pp.337-343, 2012.
DOI : 10.1016/j.compscitech.2011.11.023

J. Lang, R. W. Manson, and . Hertzberg, Mechanisms of fatigue fracture in short glass fibre-reinforced polymers, Journal of Materials Science, vol.3, issue.5, pp.4015-4030, 1987.
DOI : 10.1007/BF01133353

M. Laspalas, C. Crespo, M. A. Jiménez, B. García, and J. L. Pelegay, Application of micromechanical models for elasticity and failure to short fibre reinforced composites. Numerical implementation and experimental validation, Computers & Structures, vol.86, issue.9, pp.977-987, 2008.
DOI : 10.1016/j.compstruc.2007.04.024

M. H. Launay, Y. Maitournam, I. Marco, F. Raoult, and . Szmytka, Cyclic behaviour of short glass fibre reinforced polyamide: Experimental study and constitutive equations, International Journal of Plasticity, vol.27, issue.8, pp.1267-1293, 2011.
DOI : 10.1016/j.ijplas.2011.02.005

M. H. Launay, Y. Maitournam, I. Marco, and . Raoult, Multiaxial fatigue models for short glass fiber reinforced polyamide ??? Part I: Nonlinear anisotropic constitutive behavior for cyclic response, International Journal of Fatigue, vol.47, pp.382-389, 2013.
DOI : 10.1016/j.ijfatigue.2012.03.012

URL : https://hal.archives-ouvertes.fr/hal-00778277

]. A. Launay, Y. Marco, M. H. Maitournam, and I. Raoult, Modelling the influence of temperature and relative humidity on the time-dependent mechanical behaviour of a short glass fibre reinforced polyamide, Mechanics of Materials, vol.56, issue.83, pp.1-10, 2013.
DOI : 10.1016/j.mechmat.2012.08.008

URL : https://hal.archives-ouvertes.fr/hal-00778275

L. Saux, Evaluation of the fatigue defect population in an elastomer using X-ray computed micro-tomography, Polymer Engineering & Science, vol.32, issue.10, pp.1253-1263, 2011.
DOI : 10.1002/pen.21872

URL : https://hal.archives-ouvertes.fr/hal-00622913

Y. Lee, S. Lee, J. Youn, K. Chung, and T. Kang, Characterization of fiber orientation in short fiber reinforced composites with an image processing technique, Materials Research Innovations, vol.6, issue.2, pp.65-72, 2002.
DOI : 10.1007/s10019-002-0180-8

L. Lindhagen and . Berglund, Microscopical damage mechanisms in glass fiber reinforced polypropylene, Journal of Applied Polymer Science, vol.69, issue.7, pp.1319-1327, 1998.
DOI : 10.1002/(SICI)1097-4628(19980815)69:7<1319::AID-APP6>3.0.CO;2-H

. Madi, Influence de la morphologie tridimensionnelle des phases sur le comportement mécanique de réfractaires électrofondus, 2006.

M. Maire, J. Babout, R. Buffiere, and . Fougeres, Recent results on 3D characterisation of microstructure and damage of metal matrix composites and a metallic foam using X-ray tomography, Materials Science and Engineering: A, vol.319, issue.321, pp.319-321, 2001.
DOI : 10.1016/S0921-5093(01)00924-8

M. , ]. E. Maire, J. Y. Buffière, L. Salvo, J. J. Blandin et al., On the Application of X-ray Microtomography in the Field of Materials Science, Advanced Engineering Materials, vol.3, issue.8, p.539, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00475297

]. Mallick, Particulate and Short Fiber Reinforced Polymer Composites, Comprehensive Composite Materials, pp.291-331, 2000.

]. P. Mallick and Y. Zhou, Effect of mean stress on the stress-controlled fatigue of a short E-glass fiber reinforced polyamide-6,6, International Journal of Fatigue, vol.26, issue.9, pp.941-946, 2004.
DOI : 10.1016/j.ijfatigue.2004.02.003

]. G. Mccombe, J. Rouse, R. S. Trask, P. J. Withers, and I. P. Bond, X-ray damage characterisation in self-healing fibre reinforced polymers, Composites Part A: Applied Science and Manufacturing, vol.43, issue.4, pp.613-620, 2012.
DOI : 10.1016/j.compositesa.2011.12.020

. Megally, Etude et Modélisation de l'orientation de fibres dans des thermoplastiques renforcés, 2005.

]. F. Meraghni and M. L. Benzeggagh, Micromechanical modelling of matrix degradation in randomly oriented discontinuous-fibre composites, Composites Science and Technology, vol.55, issue.2, pp.171-186, 1995.
DOI : 10.1016/0266-3538(95)00096-8

C. Meraghni, M. Blakeman, and . Benzeggagh, Effect of interfacial decohesion on stiffness reduction in a random discontinuous-fibre composite containing matrix microcracks, Composites Science and Technology, vol.56, issue.5, pp.541-555, 1996.
DOI : 10.1016/0266-3538(96)00039-5

F. Meraghni, F. Desrumaux, and M. L. Benzeggagh, Implementation of a constitutive micromechanical model for damage analysis in glass mat reinforced composite structures, Composites Science and Technology, vol.62, issue.16, pp.2087-2097, 2002.
DOI : 10.1016/S0266-3538(02)00110-0

F. Meraghni, H. Nouri, C. Bourgeois, P. Czarnota, and . Lory, Parameters identification of fatigue damage model for short glass fiber reinforced polyamide (PA6-GF30) using digital image correlation, Procedia Engineering, vol.10, issue.137, pp.2110-2116, 2011.
DOI : 10.1016/j.proeng.2011.04.349

A. Miettinen, C. L. Hendriks, G. Chinga-carrasco, E. K. Gamstedt, and M. Kataja, A non-destructive X-ray microtomography approach for measuring fibre length in short-fibre composites, Composites Science and Technology, vol.72, issue.15, pp.1901-1908, 2012.
DOI : 10.1016/j.compscitech.2012.08.008

A. Moffat, P. Wright, J. Buffière, I. Sinclair, and S. M. Spearing, Micromechanisms of damage in 0?? splits in a [90/0]s composite material using synchrotron radiation computed tomography, Scripta Materialia, vol.59, issue.10, pp.1043-1046, 2008.
DOI : 10.1016/j.scriptamat.2008.07.034

URL : https://hal.archives-ouvertes.fr/hal-00433932

M. Monson, C. W. Braunwarth, and . Extrand, Moisture absorption by various polyamides and their associated dimensional changes, Journal of Applied Polymer Science, vol.28, issue.1, pp.355-363, 2008.
DOI : 10.1002/app.27057

]. Montesano, Z. Fawaz, and H. Bougherara, Use of infrared thermography to investigate the fatigue behavior of a carbon fiber reinforced polymer composite, Composite Structures, vol.97, pp.76-83, 2013.
DOI : 10.1016/j.compstruct.2012.09.046

]. B. Mouhmid, A. Imad, N. Benseddiq, S. Benmedakhène, and A. Maazouz, A study of the mechanical behaviour of a glass fibre reinforced polyamide 6,6: Experimental investigation, Polymer Testing, vol.25, issue.4, pp.544-552, 2006.
DOI : 10.1016/j.polymertesting.2006.03.008

URL : https://hal.archives-ouvertes.fr/hal-00124246

. Müller, . Dillenberger, . Brylka, R. Böhlke, S. Glöckner et al., Homogenization of elastic properties of short fiber reinforced composites based on micro computed tomography data, The 19th International Conference on Composite Materials, p.2013, 2013.

A. Noda, T. Takahara, and . Kajiyama, Fatigue failure mechanisms of short glass-fiber reinforced nylon 66 based on nonlinear dynamic viscoelastic measurement, Polymer, vol.42, issue.13, pp.5803-5811, 2001.
DOI : 10.1016/S0032-3861(00)00897-1

]. H. Nouri, F. Meraghni, and P. Lory, Fatigue damage model for injection-molded short glass fibre reinforced thermoplastics, International Journal of Fatigue, vol.31, issue.5, pp.934-942, 2009.
DOI : 10.1016/j.ijfatigue.2008.10.002

URL : https://hal.archives-ouvertes.fr/pastel-00005669

H. Nouri, Modélisation et identification de lois de comportement avec endommagement en fatigue polycyclique de matériaux composite a matrice thermoplastique, pp.46-67, 2009.

H. Nouri, C. Czarnota, and F. Meraghni, Experimental Parameters Identification of Fatigue Damage Model for Short Glass Fiber Reinforced Thermoplastics GFRP, Design and Modeling of Mechanical Systems, pp.523-530, 2013.
DOI : 10.1007/978-3-642-37143-1_63

URL : https://hal.archives-ouvertes.fr/hal-01218414

C. Ramirez-jimenez, N. Papadakis, T. Reynolds, P. Gan, M. Purnell et al., Identification of failure modes in glass/polypropylene composites by means of the primary frequency content of the acoustic emission event, Composites Science and Technology, vol.64, issue.12, pp.1819-1827, 2004.
DOI : 10.1016/j.compscitech.2004.01.008

M. Rask, B. Madsen, F. Bent, J. L. Sø-rensen, K. Fife et al., In situ observations of microscale damage evolution in unidirectional natural fibre composites, Composites Part A: Applied Science and Manufacturing, vol.43, issue.10, pp.1639-1649, 2012.
DOI : 10.1016/j.compositesa.2012.02.007

]. H. Rolland, N. Saintier, and G. Robert, Damage mechanisms into short glass fiber reinforced thermoplastic during in situ microtomographic tensile tests, 16th European Conference on Composite Materials (Accepted), p.2014, 2014.

. Sato, S. Kurauchi, O. Sato, and . Kamigaito, Mechanism of fracture of short glass fibre-reinforced polyamide thermoplastic, Journal of Materials Science, vol.2, issue.4, pp.1145-1152, 1984.
DOI : 10.1007/BF01120023

N. Sato, S. Kurauchi, O. Sato, and . Kamigaito, Microfailure behaviour of randomly dispersed short fibre reinforced thermoplastic composites obtained by direct SEM observation, Journal of Materials Science, vol.22, issue.14, pp.3891-3898, 1991.
DOI : 10.1007/BF01184987

P. J. Schilling, B. R. Karedla, and A. K. Tatiparthi, X-ray computed microtomography of internal damage in fiber reinforced polymer matrix composites, Composites Science and Technology, vol.65, issue.14, pp.2071-2078, 2005.
DOI : 10.1016/j.compscitech.2005.05.014

]. A. Scott, I. Sinclair, S. M. Spearing, A. Thionnet, and A. R. Bunsell, Damage accumulation in a carbon/epoxy composite: Comparison between a multiscale model and computed tomography experimental results, Composites Part A: Applied Science and Manufacturing, vol.43, issue.9, pp.1514-1522, 2012.
DOI : 10.1016/j.compositesa.2012.03.011

URL : https://hal.archives-ouvertes.fr/hal-00723163

. Seignobos, Compréhension des mécanismes physiques de fatigue dans le polyamide vierge et renforcé de fibres de verre, pp.46-110, 2009.

]. R. Seltzer, C. González, R. Muñoz, J. Llorca, and T. Blanco-varela, X-ray microtomography analysis of the damage micromechanisms in 3D woven composites under low-velocity impact, Composites Part A: Applied Science and Manufacturing, vol.45, pp.49-60, 2013.
DOI : 10.1016/j.compositesa.2012.09.017

H. Shen, S. Nutt, and D. Hull, Direct observation and measurement of fiber architecture in short fiber-polymer composite foam through micro-CT imaging, Composites Science and Technology, vol.64, issue.13-14, pp.2113-2120, 2004.
DOI : 10.1016/j.compscitech.2004.03.003

F. Sket, R. Seltzer, J. M. Molina-aldareguía, C. Gonzalez, and J. Llorca, Determination of damage micromechanisms and fracture resistance of glass fiber/epoxy cross-ply laminate by means of X-ray computed microtomography, Composites Science and Technology, vol.72, issue.2, pp.350-359, 2012.
DOI : 10.1016/j.compscitech.2011.11.025

]. C. Sonsino and E. Moosbrugger, Fatigue design of highly loaded short-glass-fibre reinforced polyamide parts in engine compartments, International Journal of Fatigue, vol.30, issue.7, pp.1279-1288, 2008.
DOI : 10.1016/j.ijfatigue.2007.08.017

T. I. Steinberger, . Valadas-leitao, . Ladstatter, W. Pinter, R. W. Billinger et al., Infrared thermographic techniques for non-destructive damage characterization of carbon fibre reinforced polymers during tensile fatigue testing, International Journal of Fatigue, vol.28, issue.10, pp.1340-1347, 2006.
DOI : 10.1016/j.ijfatigue.2006.02.036

]. S. Stock, Recent advances in X-ray microtomography applied to materials, International Materials Reviews, vol.75, issue.189, pp.129-181, 2008.
DOI : 10.1359/jbmr.2003.18.8.1486

J. Suuronen, A. Kallonen, M. Eik, J. Puttonen, R. Serimaa et al., Analysis of short fibres orientation in steel fibre-reinforced concrete (SFRC) by X-ray tomography, Journal of Materials Science, vol.142, issue.3, pp.1358-1367, 2012.
DOI : 10.1007/s10853-012-6882-4

P. Jeffrey, I. Szabo, and . Keough, Method for analysis of dynamic mechanical thermal analysis data using the Havriliak-Negami model, Thermochimica Acta, vol.392393, pp.1-12, 2002.

]. K. Tan, N. Watanabe, and Y. Iwahori, X-ray radiography and micro-computed tomography examination of damage characteristics in stitched composites subjected to impact loading, Composites Part B: Engineering, vol.42, issue.4, pp.874-884, 2011.
DOI : 10.1016/j.compositesb.2011.01.011

M. Toubal, B. Karama, and . Lorrain, Damage evolution and infrared thermography in woven composite laminates under fatigue loading, International Journal of Fatigue, vol.28, issue.12, pp.1867-1872, 2006.
DOI : 10.1016/j.ijfatigue.2006.01.013

R. Kevin and . Uleck, A hybrid model for fatigue life estimation of polymer matrix composites, 2006.

]. Wilkinson and A. Ryan, Polymer processing and structure development, pp.45-46, 1998.

J. Philip, M. Withers, and . Preuss, Fatigue and Damage in Structural Materials Studied by X-Ray Tomography, Annual Review of Materials Research, vol.42, issue.1, pp.81-103, 2012.

]. P. Wright, I. Moffat, S. M. Sinclair, and . Spearing, High resolution tomographic imaging and modelling of notch tip damage in a laminated composite, Composites Science and Technology, vol.70, issue.10, pp.1444-1452, 2010.
DOI : 10.1016/j.compscitech.2010.04.012

URL : https://hal.archives-ouvertes.fr/hal-00657647

P. K. Zhou and . Mallick, A non-linear damage model for the tensile behavior of an injection molded short E-glass fiber reinforced polyamide-6,6, Materials Science and Engineering: A, vol.393, issue.1-2, pp.303-309, 2005.
DOI : 10.1016/j.msea.2004.10.038

P. K. Zhou and . Mallick, Fatigue performance of an injection-molded short E-glass fiber-reinforced polyamide 6,6. I. Effects of orientation, holes, and weld line, Polymer Composites, vol.16, issue.2, pp.230-237, 2006.
DOI : 10.1002/pc.20182

M. F. Arif, N. Saintier, F. Meraghni, J. Fitoussi, Y. Chemisky et al., Multiscale fatigue damage characterization in short glass fiber reinforced polyamide-66, Composites Part B: Engineering, vol.61, pp.55-65, 2014.
DOI : 10.1016/j.compositesb.2014.01.019

URL : https://hal.archives-ouvertes.fr/hal-00973379

M. F. Arif, F. Meraghni, Y. Chemisky, N. Despringre, and G. Robert, In situ damage mechanisms investigation of PA66/GF30 composite: Effect of relative humidity, Composites Part B: Engineering, vol.58, pp.487-495, 2014.
DOI : 10.1016/j.compositesb.2013.11.001

C. 1. Arif, F. Meraghni, N. Saintier, Y. Chemisky, J. Fitousi et al., Fatigue damage investigation of PA66/GF30 by X?Ray Microtomography, th European Conference on Composite Materials, pp.22-26, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01218150

N. Despringre, Y. Chemisky, M. F. Arif, G. Robert, and F. Meraghni, Multi-scale viscoelastic damage model of short glass fiber reinforced polyamide-66 under highcycle fatigue, th European Conference on Composite Materials, pp.22-26, 2014.

M. F. Arif, N. Saintier, F. Meraghni, Y. Chemisky, J. Fitoussi et al., Multiscale fatigue damage characterization in short glass fiber reinforced polyamide-66, th International Conference on Composite Materials, 2013.
DOI : 10.1016/j.compositesb.2014.01.019

URL : https://hal.archives-ouvertes.fr/hal-00973379

M. F. Arif, N. Despringre, Y. Chemisky, G. Robert, and F. Meraghni, In Situ damage mechanisms investigation of polyamide/short glass fiber composite, th International Conference on Composite Materials, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01229803

M. F. Arif, N. Despringre, Y. Chemisky, G. Robert, and F. Meraghni, In situ SEM damage mechanisms investigation of short glass fiber reinforced polyamide composite, èmes Journées Nationales sur les Composites, pp.12-14, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01229803

M. F. Arif, F. Meraghni, N. Saintier, J. Fitoussi, and G. Robert, Experimental fatigue damage evaluation of short glass fiber reinforced polyamide composites, 8 th European solid mechanics conference, 2012.