S. E. Reid and U. De-brentani, The Fuzzy Front End of New Product Development for Discontinuous Innovations: A Theoretical Model, Journal of Product Innovation Management, vol.21, issue.3, pp.170-184, 2004.
DOI : 10.1111/j.0737-6782.2004.00068.x

V. D. Remko, Brainsketching And How it Differs From Brainstorming. Creativity And Innovation Management, pp.43-54, 2002.

B. F. Robertson, J. Walther, and D. F. Radcliffe, Creativity and the Use of CAD Tools: Lessons for Engineering Design Education From Industry, Journal of Mechanical Design, vol.129, issue.7, 2007.
DOI : 10.1115/1.2722329

M. A. Runco and R. E. Charles, Judgments of originality and appropriateness as predictors of creativity, Personality and Individual Differences, vol.15, issue.5, pp.537-546, 1993.
DOI : 10.1016/0191-8869(93)90337-3

D. Schön, Educating the Reflective Practitioner, 1990.

D. Schön, The Reflective Practitioner: How Professionals Think in Action, The Journal of Continuing Higher Education, vol.34, issue.3, 1984.
DOI : 10.1080/07377366.1986.10401080

N. P. Suh, The Principles of Design, 1990.

P. Tessarolo, Is Integration Enough for Fast Product Development? An Empirical Investigation of the Contextual Effects of Product Vision, Journal of Product Innovation Management, vol.39, issue.10, pp.69-82, 2006.
DOI : 10.1109/17.509980

S. H. Thomke, Experimentation Matters: Unlocking The Potential Of New Technologies For Innovation, 2002.

M. L. Tushman, P. C. Anderson, and C. Reilly, Technology Cycles Innovation Streams And Ambidextrous Organizations. Managing Strategic Innovation And Change, pp.3-23, 1997.

D. G. Ullman, The Mechanical Design Process, 2003.

A. H. Van-de-ven, D. E. Polley, R. Garud, and S. Venkataraman, The innovation journey, 1999.

R. Verganti, Design, meanings and radical innovation: A Meta-Model And A Research Agenda, Journal of Product Innovation Management, 2008.

P. Arrighi, L. Masson, and B. Weil, Breaking the dilemma between robustness and generativeness ; an experimental assessment of a new software design suite IPDM Conference Paper, 2012.

H. J. Boeddrich, Ideas in the workplace: a new approach towards organizing the fuzzy front end of the innovation process. Creativity and innovation management, pp.274-285, 2004.

Y. T. Cheng and A. H. Van-de-ven, Learning the Innovation Journey: Order out of Chaos?, Organization Science, vol.7, issue.6, pp.593-614, 1996.
DOI : 10.1287/orsc.7.6.593

J. K. Christiansen and C. J. Varnes, Formal Rules in Product Development: Sensemaking of Structured Approaches, Journal of Product Innovation Management, vol.21, issue.(4), pp.502-519, 2009.
DOI : 10.1111/j.1540-5885.2009.00677.x

K. B. Clark and T. Fujimoto, Product development performance: Strategy, organization, and management in the world auto industry, 1991.

J. Clarkson and C. Eckert, Design process improvement: a review of current practice, 2005.
DOI : 10.1007/978-1-84628-061-0

R. G. Cooper, Perspective third-generation new product processes, Journal of Product Innovation Management, vol.11, issue.1, 1994.
DOI : 10.1016/0737-6782(94)90115-5

R. Garud and A. Kumaraswamy, Changing competitive dynamics in network industries: An exploration of sun microsystems' open systems strategy, Strategic Management Journal, vol.14, issue.5, pp.351-369, 1993.
DOI : 10.1002/smj.4250140504

H. G. Gemünden, S. Salomo, and K. Hölzle, Role Models for Radical Innovations in Times of Open Innovation, Creativity and Innovation Management, vol.7, issue.11, pp.408-421, 2007.
DOI : 10.1108/08858620010316813

N. Harmancioglu, R. C. Mcnally, R. J. Calantone, and S. S. Durmusoglu, Your new product development (NPD) is only as good as your process: an exploratory analysis of new NPD process design and implementation, R&D Management, vol.29, issue.1, pp.399-424, 2007.
DOI : 10.2307/257550

A. Hatchuel, L. Masson, P. Weil, and B. , The Development of Science?Based Products: Managing by Design Spaces. Creativity and innovation management, pp.345-354, 2005.

E. J. Kleinschmidt and R. G. Cooper, The impact of product innovativeness on performance, Journal of Product Innovation Management, vol.8, issue.4, pp.240-251, 1991.
DOI : 10.1016/0737-6782(91)90046-2

A. Khurana and S. R. Rosenthal, Integrating the fuzzy front end of new product development, pp.103-120, 1997.

S. M. Smith, B. Thomas, J. S. Ward, and . Schumacher, Constraining effects of examples in a creative generation task, Memory & Cognition, vol.110, issue.6, pp.837-845, 1993.
DOI : 10.3758/BF03202751

A. Maccormack, R. Verganti, and M. Iansiti, Developing Products on ???Internet Time???: The Anatomy of a Flexible Development Process, Management Science, vol.47, issue.1, pp.133-150, 2001.
DOI : 10.1287/mnsc.47.1.133.10663

C. M. Mcdermott and G. C. Connor, Managing radical innovation: an overview of emergent strategy issues, Journal of Product Innovation Management, vol.19, issue.6, pp.424-438, 2002.
DOI : 10.1016/S0737-6782(02)00174-1

M. Ozer, Reducing the demand uncertainties at the fuzzy-front-end of developing new online services, Research Policy, vol.36, issue.9, pp.1372-1387, 2007.
DOI : 10.1016/j.respol.2007.06.001

A. Richtnér and P. Åhlström, Organizational Slack and Knowledge Creation in Product Development Projects: The Role of Project Deliverables, Creativity and Innovation Management, vol.22, issue.4, pp.428-437, 2010.
DOI : 10.1111/j.1467-8691.2010.00576.x

R. Sanchez, Strategic flexibility in product competition, Strategic Management Journal, vol.12, issue.S1, pp.1-135, 1995.
DOI : 10.1002/smj.4250160921

R. Sanchez and J. Mahoney, Modularity, flexibility, and knowledge management in product and organization design. Strategic management journal, pp.63-76, 1996.

V. P. Seidel, Concept Shifting and the Radical Product Development Process, Journal of Product Innovation Management, vol.45, issue.5, pp.522-533, 2007.
DOI : 10.1111/j.0737-6782.2005.00101.x

S. Thomke and T. Fujimoto, The effect of ???front-loading??? problem-solving on product development performance, Journal of Product Innovation Management, vol.17, issue.2, pp.128-142, 2000.
DOI : 10.1016/S0737-6782(99)00031-4

J. M. Utterback and W. J. Abernathy, A dynamic model of process and product innovation, Omega, vol.3, issue.6, pp.639-656, 1975.
DOI : 10.1016/0305-0483(75)90068-7

A. H. Van-de-ven, D. E. Polley, R. Garud, and S. Venkataraman, The innovation journey, 1999.

R. W. Veryzer, Discontinuous Innovation and the New Product Development Process, Journal of Product Innovation Management, vol.15, issue.4, pp.304-321, 1998.
DOI : 10.1016/S0737-6782(97)00105-7

R. K. Yin, Case study research: Design and methods, 2002.

P. Arrighi, L. Masson, P. Weil, and B. , Breaking the dilemma between robustness and generativeness, an experimental assessment of a new software design suite. Paper presented at the 19 th International Product Development Management Conference, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00825294

P. Arrighi and A. Kazakci, Lack of integration between engineering industrial design processes, Proceedings of the 21st International Conference of Engineering Design (ICED'13), 2013.
URL : https://hal.archives-ouvertes.fr/hal-00825298

S. Bae, R. Balakrishnan, and K. Singh, ILoveSketch, Proceedings of the 21st annual ACM symposium on User interface software and technology, UIST '08, pp.121-131, 1972.
DOI : 10.1145/1449715.1449740

C. Bouchard, J. Omhover, C. Mougenot, A. Aoussat, and S. Westerman, TRENDS: a contentbased information retrieval system for designers The Netherlands, Design Computing and Cognition '08, pp.593-611, 2008.

M. Bozdoc, The history Of CAD, History.htm. Accessed, vol.14, 1999.

E. Catmull and J. Clark, Recursively generated B-spline surfaces on arbitrary topological meshes, Computer-Aided Design, vol.10, issue.6, pp.350-355, 1978.
DOI : 10.1016/0010-4485(78)90110-0

S. Choi and H. Cheung, A multi-material virtual prototyping system, Computer-Aided Design, vol.37, issue.1, pp.123-136, 2005.
DOI : 10.1016/j.cad.2004.06.002

P. Daloz, Concevoir les outils du bureau d'??tudes : Dassault Syst??mes, une firme innovante au service des concepteurs, Entreprises et histoire, vol.58, issue.1, pp.150-164, 2010.
DOI : 10.3917/eh.058.0150
URL : https://hal-mines-paristech.archives-ouvertes.fr/hal-00696935/file/Daloz_2010_E_H_transcription_daloz_V6.pdf

F. Deschênes, D. Ziou, and P. Fuchs, An unified approach for a simultaneous and cooperative estimation of defocus blur and spatial shifts, Image and Vision Computing, vol.22, issue.1, pp.35-57, 2004.
DOI : 10.1016/j.imavis.2003.08.003

T. Dorta, E. Perez, and A. Lesage, The ideation gap:, Design Studies, vol.29, issue.2, pp.121-141, 2008.
DOI : 10.1016/j.destud.2007.12.004

N. Dyn, M. Floater, and K. Hormann, Four-point curve subdivision based on iterated chordal and centripetal parameterizations, Computer Aided Geometric Design, vol.26, issue.3, pp.279-286, 2009.
DOI : 10.1016/j.cagd.2008.09.006

G. Farin, J. Hoschek, and M. Kim, Curves and surfaces for CAGD, fourth edition: a practical guide. North-Holland, Amsterdam Forty A (1992) Objects of desire, pp.131-167, 1998.

M. Gross and E. Do, Ambiguous intentions, Proceedings of the 9th annual ACM symposium on User interface software and technology , UIST '96, pp.183-192, 1996.
DOI : 10.1145/237091.237119

T. Igarashi, S. Matsuoka, and H. Tanaka, Teddy: a sketching interface for 3D freeform design, ACM SIGGRAPH 2007, p.21, 2007.

Y. Kang, H. Kim, H. Suzuki, and S. Han, Feature-based 3D CAD modeling on smart device using multi-touch gesture, Int J CAD/CAM, vol.13, pp.49-62, 2013.

D. Keefe, D. Feliz, T. Moscovich, D. Laidlaw, L. Jr et al., CavePainting, Proceedings of the 2001 symposium on Interactive 3D graphics , SI3D '01, pp.85-93, 2001.
DOI : 10.1145/364338.364370

E. Keller, J. Kelly, P. Maheut, J. Petiot, and P. Papalambros, Introducing ZBrush 3rd edition Incorporating user shape preference in engineering design optimisation, J Eng Des, vol.22, pp.627-650, 2011.

J. Kim, M. Pratt, R. Iyer, and R. Sriram, Standardized data exchange of CAD models with design intent, Computer-Aided Design, vol.40, issue.7, pp.760-777, 2006.
DOI : 10.1016/j.cad.2007.06.014

M. Kowalski, L. Markosian, J. Northrup, L. Bourdev, R. Barzel et al., Art-based rendering of fur, grass, and trees, Proceedings of the 26th annual conference on Computer graphics and interactive techniques , SIGGRAPH '99, pp.433-438, 1999.
DOI : 10.1145/311535.311607

A. Lasram, S. Lefebvre, and C. Damez, Procedural texture preview, Computer Graphics Forum, vol.31, issue.2pt2, pp.413-420, 2012.
DOI : 10.1111/j.1467-8659.2012.03020.x
URL : https://hal.archives-ouvertes.fr/hal-00748521

A. Lasram and S. Lefebvre, Parallel patch-based texture synthesis, Proceedings of the Fourth ACM SIGGRAPH/Eurographics Conference on High-Performance Graphics, pp.115-124, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00748535

L. Masson, P. Weil, and B. , La conception innovante comme mode d'extension et de r??g??n??ration de la conception r??gl??e : les exp??riences oubli??es aux origines des Bureaux d'??tudes, Entreprises et histoire, vol.58, issue.1, pp.51-73, 2010.
DOI : 10.3917/eh.058.0051

X. Liu, G. Dodds, J. Mccartney, and B. Hinds, Virtual DesignWorks???designing 3D CAD models via haptic interaction, Computer-Aided Design, vol.36, issue.12, pp.1129-1140, 2004.
DOI : 10.1016/j.cad.2003.10.003

C. Loop and S. Schaefer, Approximating Catmull-Clark subdivision surfaces with bicubic patches, ACM Transactions on Graphics, vol.27, issue.1, p.8, 2008.
DOI : 10.1145/1330511.1330519

C. Loop, S. Schaefer, T. Ni, and I. Castaño, Approximating subdivision surfaces with Gregory patches for hardware tessellation, ACM Trans Grap, vol.28, p.151, 2009.

G. Mandil, P. Serré, M. M. Desrochers, A. Mishkinis, A. Gentil et al., Geometrical tools for the description and control of functional specifications at the conceptual design phase Approximate convex hull of affine iterated function system attractors, Chaos Solitons Fractals, vol.5, issue.45, pp.1444-1451, 2011.

A. Nealen, T. Igarashi, O. Sorkine, and A. M. , FiberMesh, ACM Transactions on Graphics, vol.26, issue.3, p.41, 2007.
DOI : 10.1145/1276377.1276429

M. Ouertani, S. Baïna, L. Gzara, and G. Morel, Traceability and management of dispersed product knowledge during design and manufacturing, Computer-Aided Design, vol.43, issue.5, pp.546-562, 2011.
DOI : 10.1016/j.cad.2010.03.006
URL : https://hal.archives-ouvertes.fr/hal-00476669

B. Robertson, W. J. Radcliffe, and D. , Creativity and the Use of CAD Tools: Lessons for Engineering Design Education From Industry, Journal of Mechanical Design, vol.129, issue.7, pp.753-760, 2007.
DOI : 10.1115/1.2722329

P. Stergiopoulos, P. Fuchs, and C. Laurgeau, Design of a 2-finger hand exoskeleton for VR grasping simulation, Proceedings of Eurohaptics, pp.80-93, 2003.

N. Suh, Axiomatic design: advances and applications Sketch pad a man-machine graphical communication system, Proceedings of the SHARE Design Automation Workshop, pp.6-329, 1964.

P. Thurgood and J. Clark, Use of 3D non-contact digitisation and 3D touch modelling systems within automotive seating design, Proceedings of TCT Conference, pp.177-188, 2001.

M. Tovey, Styling and design: intuition and analysis in industrial design, Design Studies, vol.18, issue.1, pp.5-31, 1997.
DOI : 10.1016/S0142-694X(96)00006-3

M. Tovey, Concept design CAD for the automotive industry, Journal of Engineering Design, vol.13, issue.1, pp.5-18, 2002.
DOI : 10.1016/S0142-694X(97)00016-1

S. Umbaugh, B. Whited, E. Daniels, M. Kaschalk, P. Osborne et al., Computer imaging: digital image analysis and processing The engineering design revolution ? the people, companies and computer systems that changed forever the practice of engineering Computer-assisted animation of line and paint in Disney's Paperman, Boca Raton, FL Weisberg D Cyon Research Corporation, p.19, 2005.

D. Zhang, F. Yan, Z. Hou, and W. Kang, Virtual clay modeling system with 6-DOF haptic feedback, Mater Sci Forum, vol.628, pp.155-160, 2009.

P. Arrighi, L. Masson, P. Weil, and B. , Breaking The Dilemma Between Robustness And Generativeness, An Experimental Assessment Of A New Software Design Suite. International Product Management Conference, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00825294

P. Arrighi and A. Kazakci, Lack of Integration Between Engineering Industrial Design Processes, Proceedings of the 21st International Conference of Engineering Design (ICED'13), 2013.
URL : https://hal.archives-ouvertes.fr/hal-00825298

S. Bae, R. Balakrishnan, and K. Singh, ILoveSketch, Proceedings of the 21st annual ACM symposium on User interface software and technology, UIST '08, 2008.
DOI : 10.1145/1449715.1449740

M. Barone, The Process Improvement Impact on the Styling Workflow, EUROGRAPHICS Workshop on Sketch-Based Interfaces and Modeling. EuroGraphics Digital Library, 2004.

M. Berkowitz, Product shape as a design innovation strategy, Journal Of Product Innovation Management, pp.274-283, 1987.

P. Y. Bezier, B. Rose, and E. Caillaud, Numerical control; mathematics and applications Decisional Model for KBE Implementation in a Commercial CAD Software, Computer-Aided Design and Applications, vol.9, pp.121-131, 1972.

C. Bouchard, J. F. Omhover, C. Mougenot, A. Aoussat, and S. J. Westerman, TRENDS: A Content-Based Information Retrieval System for Designers, Design Computing and Cognition'08, pp.593-611, 2008.
DOI : 10.1007/978-1-4020-8728-8_31

M. Bozdoc, Retrieved 2010 from The History Of CAD: http://www.mbdesign.net, 1999.

E. Catmull and J. Clark, A Subdivision Algorithm for Computer Display of Curved Surfaces, Computer-Aided Design, pp.350-355, 1978.

G. M. Chaikin, An algorithm for high-speed curve generation.Computer graphics and image processing, pp.346-349, 1974.
DOI : 10.1016/0146-664x(74)90028-8

S. H. Choi and H. H. Cheung, A multi-material virtual prototyping system, Computer-Aided Design, vol.37, issue.1, pp.123-136, 2005.
DOI : 10.1016/j.cad.2004.06.002

P. Daloz, Concevoir les outils du bureau d'??tudes : Dassault Syst??mes, une firme innovante au service des concepteurs, Entreprises et histoire, vol.58, issue.1, 2010.
DOI : 10.3917/eh.058.0150
URL : https://hal-mines-paristech.archives-ouvertes.fr/hal-00696935/file/Daloz_2010_E_H_transcription_daloz_V6.pdf

D. Dori and K. Tombre, From engineering drawings to 3D cad models: are we ready now?, Computer-Aided Design, vol.27, issue.4, pp.243-254, 1995.
DOI : 10.1016/0010-4485(95)91134-7

T. Dorta, E. Perez, and A. Lesage, The ideation gap:, Design Studies, vol.29, issue.2, pp.121-141, 2008.
DOI : 10.1016/j.destud.2007.12.004

C. L. Dym, A. M. Agogino, O. Eris, D. D. Frey, and L. J. Leifer, Engineering Design Thinking, Teaching, and Learning, Journal of Engineering Education, vol.20, issue.no. 3, pp.103-120, 2005.
DOI : 10.1002/j.2168-9830.2005.tb00832.x

N. Dyn, M. S. Floater, and K. Hormann, Four-point curve subdivision based on iterated chordal and centripetal parameterizations, Computer Aided Geometric Design, vol.26, issue.3, pp.279-286, 2009.
DOI : 10.1016/j.cagd.2008.09.006

G. Farin, J. Hoschek, and M. S. Kim, Curves and Surfaces for CAGD, Fourth Edition: A Practical Guide, 2002.

A. Forty, Objects Of Desire, 1992.

P. Fuchs and F. Nashashibi, De la CAO à la réalité virtuelle. Revue internationale de CFAO et d'informatique graphique, pp.131-167, 1998.

M. D. Gross and E. Y. Do, Ambiguous intentions, Proceedings of the 9th annual ACM symposium on User interface software and technology , UIST '96, pp.183-192, 1996.
DOI : 10.1145/237091.237119

T. Igarashi, S. Matsuoka, and H. Tanaka, Teddy: a sketching interface for 3D freeform design, ACM SIGGRAPH 2007 courses, p.21, 2007.

A. Kazakci and P. L. Masson, On the use of design theories in organizational and innovation processes, International Design Conference, 2012.

Y. Kang, H. Kim, H. Suzuki, and S. Han, Feature-based 3D CAD Modeling on Smart Device Using Multi-touch Gesture, International Journal of CAD/CAM, vol.13, issue.2, 2013.

E. Keller, Introducing ZBrush 3rd Edition, 2012.

J. C. Kelly, P. Maheut, J. F. Petiot, and P. Y. Papalambros, Incorporating user shape preference in engineering design optimisation, Journal of Engineering Design, vol.48, issue.9, pp.627-650, 2011.
DOI : 10.2307/1251544
URL : https://hal.archives-ouvertes.fr/hal-00628538

J. Kim, M. J. Pratt, R. G. Iyer, and R. D. Sriram, Standardized data exchange of CAD models with design intent, Computer-Aided Design, vol.40, issue.7, pp.760-777, 2006.
DOI : 10.1016/j.cad.2007.06.014

J. F. Hughes, Art-based rendering of fur, grass, and trees, Proceedings of the 26th annual conference on Computer graphics and interactive techniques, pp.433-438, 1999.

A. Lasram and S. Lefebvre, Parallel patch-based texture synthesis Eurographics Association, Proceedings of the Fourth ACM SIGGRAPH/Eurographics conference on High-Performance Graphics, pp.115-124, 2012.

L. Masson, P. Weil, B. Hatchuel, and A. , Les processus d'innovation: Conception innovante et croissance des entreprises, Hermes science publ, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00830210

L. Masson, P. Weil, and B. , La conception innovante comme mode d'extension et de régénération de la conception réglée, 2010.

X. Liu, G. Dodds, J. Mccartney, and B. K. Hinds, Virtual DesignWorks???designing 3D CAD models via haptic interaction, Computer-Aided Design, vol.36, issue.12, pp.36-1129, 2004.
DOI : 10.1016/j.cad.2003.10.003

R. Loewy, La Laideur se vend mal, p.20, 1963.

C. Loop and S. Schaefer, Approximating Catmull-Clark subdivision surfaces with bicubic patches, ACM Transactions on Graphics, vol.27, issue.1, 2008.
DOI : 10.1145/1330511.1330519
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.153.2047

C. Loop, S. Schaefer, T. Ni, and I. Castaño, Approximating subdivision surfaces with Gregory patches for hardware tessellation, In ACM Transactions on Graphics, 2009.
DOI : 10.1145/1618452.1618497
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.155.1581

G. Mandil, P. Serré, M. Mireille, and A. Desrochers, Geometrical tools for the description and control of functional specifications at the conceptual design phase, IJODIR, vol.5, issue.1, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00575576

A. Mishkinis, C. Gentil, S. Lanquetin, and D. Sokolov, Approximate convex hull of affine iterated function system attractors, Chaos, Solitons & Fractals, vol.45, issue.11, pp.45-1444, 2012.
DOI : 10.1016/j.chaos.2012.07.015
URL : https://hal.archives-ouvertes.fr/hal-00755842

M. Nagamachi, Kansei engineering as a powerful consumer-oriented technology for product development, Applied Ergonomics, vol.33, issue.3, pp.289-294, 2002.
DOI : 10.1016/S0003-6870(02)00019-4

A. Nealen, T. Igarashi, O. Sorkine, and M. Alexa, FiberMesh, ACM Transactions on Graphics, vol.26, issue.3, p.41, 2007.
DOI : 10.1145/1276377.1276429

M. Z. Ouertani, S. Baïna, L. Gzara, and G. Morel, Traceability and management of dispersed product knowledge during design and manufacturing, Computer-Aided Design, vol.43, issue.5, pp.546-562, 2011.
DOI : 10.1016/j.cad.2010.03.006
URL : https://hal.archives-ouvertes.fr/hal-00476669

T. J. Purcell, I. Buck, W. R. Mark, and P. Hanrahan, Ray tracing on programmable graphics hardware, ACM Transactions on Graphics (TOG), vol.21, issue.3, pp.703-712, 2002.
DOI : 10.1145/566570.566640
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.16.8345

A. Raposo, E. T. Corseuil, G. N. Wagner, I. H. Dos-santos, and M. Gattass, Towards the use of cad models in VR applications, Proceedings of the 2006 ACM international conference on Virtual reality continuum and its applications, VRCIA '06, pp.67-74, 2006.
DOI : 10.1145/1128923.1128935

L. Rampino, The innovation pyramid: A categorization of the innovation phenomenon in the product-design field, International Journal of Design, vol.5, issue.1, pp.3-16, 2011.

P. G. Rowe, Design Thinking, 1991.

P. Stergiopoulos, P. Fuchs, and C. Laurgeau, Design of a 2-finger hand exoskeleton for VR grasping simulation, Eurohaptics, pp.80-93, 2003.

N. P. Suh, Axiomatic design: advances and applications, 2001.

I. E. Sutherland, Sketch pad a man-machine graphical communication system, Proceedings of the SHARE design automation workshop on , DAC '64, pp.6-329, 1964.
DOI : 10.1145/800265.810742

P. Thurgood and J. Clark, Use of 3D non-contact digitisation and 3D touch modelling systems within automotive seating design, Proceedings of TCT Conference, pp.177-188, 2001.

M. Tovey, Styling and design: intuition and analysis in industrial design, Design Studies, vol.18, issue.1, pp.5-31, 1997.
DOI : 10.1016/S0142-694X(96)00006-3

M. Tovey, Concept design CAD for the automotive industry, Journal of Engineering Design, vol.13, issue.1, pp.5-18, 2002.
DOI : 10.1016/S0142-694X(97)00016-1

S. E. Umbaugh and R. , Computer Imaging: Digital Image Analysis And Processing Verganti Design, meanings and radical innovation: A Meta-Model And A Research Agenda, Journal of Product Innovation Management, 2005.

V. Stamm and B. , Managing innovation, design and creativity, 2008.

D. Weisberg, The Engineering Design Revolution ? The People, 2006.

B. Whited, E. Daniels, M. Kaschalk, P. Osborne, and K. Odermatt, Computerassisted animation of line and paint in Disney's Paperman, ACM SIGGRAPH 2012 Posters, p.19, 2012.

D. H. Zhang, F. X. Yan, Z. X. Hou, and W. K. Kang, Virtual Clay Modeling System with 6-DOF Haptic Feedback, In Materials Science Forum, vol.628, pp.155-160, 2009.

G. Smith, Misunderstood and Mysterious: How Design and Designers are Perceived by Design Professionals, Design Educators and the Public, 2005.

. Bibliographie1, A. Abraham, and S. Windmann, Selective information processing advantages in creative cognition as a function of schizotypy, Creativity Research Journal, vol.20, pp.1-6, 2008.

M. Agogué, Modéliser l'effet des biais cognitifs sur les dynamiques industrielles : Innovation orpheline et architecte de l'inconnu. Doctoral dissertation, 2012.

P. Arrighi and O. Kazakci, Lack of integration between engineering industrial design processes, International Conference on Engineering Design, vol.2013, issue.9, pp.39-048, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00825298

S. H. Bae, R. Balakrishnan, and K. Singh, ILoveSketch, Proceedings of the 21st annual ACM symposium on User interface software and technology, UIST '08, pp.151-160, 2008.
DOI : 10.1145/1449715.1449740

M. Berkowitz, Product shape as a design innovation strategy, Journal of Product Innovation Management, vol.4, issue.4, pp.274-283, 1987.
DOI : 10.1016/0737-6782(87)90031-2

P. Betts, Science, Semiotics and Society: The Ulm Hochschule fur Gestaltung in Retrospect, Design Issues, vol.14, issue.2, pp.67-82, 1998.
DOI : 10.2307/1511852

C. Bialès, La gestion. Les cahiers économie et gestion, pp.25-30, 2013.

C. Blanchard, S. Burgess, Y. Harvill, J. Lanier, A. Lasko et al., Reality built for two: a virtual reality tool, ACM SIGGRAPH Computer Graphics, vol.24, issue.2, pp.35-36, 1990.
DOI : 10.1145/91394.91409

C. Bouchard, D. Lim, and A. Aoussat, Development of a Kansei Engineering System for industrial design, Proceedings of the Asian Design International Conference, pp.1-12, 2003.

G. C. Bowker, Schlumberger's bureau d'??tudes, Entreprises et histoire, vol.58, issue.1, pp.165-169, 2010.
DOI : 10.3917/eh.058.0165

M. Bozdoc, The history of CAD, 2004.

D. Braha and Y. Reich, Topologial structures for modelling engineering design processes, CAD-History.htm [12], pp.185-199, 2003.

B. Brown, I. Maccoll, M. Chalmers, A. Galani, C. Randell et al., Lessons from the lighthouse, Proceedings of the conference on Human factors in computing systems , CHI '03, pp.577-584, 2003.
DOI : 10.1145/642611.642711

T. Brown, Design thinking, Harvard business review, vol.86, pp.84-96, 2008.

G. Burdea and P. Coiffet, Virtual reality technology. Presence : Teleoperators and virtual environments, pp.663-664, 2003.

B. Buxton, Sketching User Experiences : Getting the Design Right and the Right Design, 2010.

C. Carlsson and O. Hagsand, DIVE A multi-user virtual reality system, Proceedings of IEEE Virtual Reality Annual International Symposium, pp.394-400, 1993.
DOI : 10.1109/VRAIS.1993.380753

C. B. Chapman and M. Pinfold, The application of a knowledge based engineering approach to the rapid design and analysis of an automotive structure Advances in Engineering Software, pp.903-912, 2001.

P. Chayutsahakij and S. Poggenpohl, User-centered innovation : The interplay between user-research and design innovation, Proceedings of the European Academy of Management 2nd Annual Conference on Innovative Research in Management, pp.1-10, 2002.

H. Cohen and C. Lefebvre, Handbook of categorization in cognitive science, 4. Amsterdam, 2005.

T. Convard, Conception assistée par ordinateur en environnement immersif . Doctoral dissertation, 2005.

R. G. Cooper, Winning at new products, 1988.

R. G. Cooper, S. J. Edgett, and E. J. Kleinschmidt, Optimizing the Stage-Gate Process : What Best-practice Companies Do, Research- Technology Management, vol.45, pp.21-27, 2002.

N. Cross, Designerly ways of knowing, Design Studies, vol.3, issue.4, 2006.
DOI : 10.1016/0142-694X(82)90040-0

D. F. Cuffaro, B. Vogel, and B. Matt, Why good design doesn't always guarantee success, Design Management Journal (Former Series), vol.6, issue.no. 4, pp.49-55, 2002.
DOI : 10.1111/j.1948-7169.2002.tb00298.x

D. Vaujany and F. X. , Modelling IT use : an archetypal approach, Electronic Journal of Information Systems Evaluation, vol.6, pp.1-11, 2003.

T. Dorta, E. Pérez, and A. Lesage, The ideation gap:, Design Studies, vol.29, issue.2, pp.121-141, 2008.
DOI : 10.1016/j.destud.2007.12.004

T. Dorta, A. Lesage, E. Pérez, and J. C. Bastien, Signs of Collaborative Ideation and the Hybrid Ideation Space, Design Creativity, 2010.
DOI : 10.1007/978-0-85729-224-7_26

T. Dorta, A. Lesage, and C. Di-bartolo, Collaboration and design education through the interconnected HIS : Immature vs. Mature CI Loops observed through Ethnography by Telepresence, Physical Digitality, vol.2, pp.97-105, 2012.

M. Droste, Bauhaus : 1919-1933, 2002.

D. Fällman, Design-oriented human-computer interaction, Proceedings of the conference on Human factors in computing systems , CHI '03, pp.225-232, 2003.
DOI : 10.1145/642611.642652

D. Fällman, In romance with the materials of mobile interaction. Doctoral dissertation, 2003.

M. Fiorentino, R. De-amicis, G. Monno, and A. Stork, Spacedesign: a mixed reality workspace for aesthetic industrial design, Proceedings. International Symposium on Mixed and Augmented Reality, pp.86-318, 2002.
DOI : 10.1109/ISMAR.2002.1115077

P. Fuchs, Les interfaces de la réalité virtuelle, 1996.

P. Fuchs and F. Nashashibi, De la CAO à la réalité virtuelle. Revue internationale de CFAO et d'informatique graphique, pp.131-167, 1998.

P. Fuchs, G. Moreau, J. P. Papin, and A. Berthoz, Le traité de la réalité virtuelle, 2000.

H. Gedenryd, How designers work : Making sense of authentic cognitive activities, 1998.

G. Gemser and M. A. Leenders, How integrating industrial design in the product development process impacts on company performance, Journal of Product Innovation Management, vol.18, issue.1, pp.28-38, 2001.
DOI : 10.1016/S0737-6782(00)00069-2

V. Goel, Sketches of thought, 1995.

J. J. Gibson, The Ecological Approach to Visual Perception, 1979.

G. Goldschmidt, The black-curtained studio : Eulogy to a dead pencil, Proceedings of Spatial Cognition for Architectural Design, pp.16-19, 2011.

G. Goldschmidt, The dialectics of sketching, Creativity Research Journal, vol.3, issue.2, pp.123-143, 1991.
DOI : 10.1016/0010-0285(89)90002-9

A. Hatchuel and B. Weil, A new approach of innovative design : an introduction to CK theory, Proceedings, International Conference on Engineering Design, pp.109-119, 2003.

A. Hatchuel, L. Masson, P. Weil, and B. , The Development of Science Based Products : Managing by Design Spaces. Creativity and innovation management, pp.345-354, 2005.

A. Hatchuel and B. Weil, C-K design theory: an advanced formulation, Research in Engineering Design, vol.15, issue.4, pp.181-192, 2009.
DOI : 10.1007/s00163-008-0043-4

A. Hatchuel, L. Masson, P. Reich, Y. Weil, and B. , A systematic approach of design theories using generativeness and robustness, Proceedings of the 18th International Conference on Engineering Design 2011, pp.87-97, 2011.

A. Hatchuel, Deconstructing meaning : Industrial design as Adornment and Wit, Proceedings of the 10th European Academy of Design Conference, pp.1-15, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00903421

C. Herstatt and B. Verworn, The "fuzzy front end" of innovation Working Papers/Technologie-und Innovations management, 2001.

J. H. Hertenstein, M. B. Platt, and R. W. Veryzer, The Impact of Industrial Design Effectiveness on Corporate Financial Performance*, Journal of Product Innovation Management, vol.11, issue.29, pp.3-21, 2005.
DOI : 10.1086/209516

J. Itten, Design and form, 1975.

D. G. Jansson and S. M. Smith, Design fixation, Design Studies, vol.12, issue.1, pp.3-11, 1991.
DOI : 10.1016/0142-694X(91)90003-F

J. C. Jones, Journal of Product Innovation Management Design methods, Managing the Dynamics of New Product Development Processes : The New Product Lifecycle Management Paradigm, 1992.

T. Kelley and J. Littman, The art of innovation : lessons in creativity from IDEO, America's leading desing firm, Crown Business, 2001.

J. Kim and D. Wilemon, Focusing the fuzzy front?end in new product development. Research and Development Management, pp.269-279, 2002.

S. J. Kline and N. Rosenberg, An overview of innovation. The positive sum strategy : Harnessing technology for economic growth, 1986.

P. Koen, G. Ajamian, R. Burkart, A. Clamen, J. Davidson et al., Providing clarity and a common language to the "fuzzy front end, pp.46-55, 2001.

A. Khurana and S. R. Rosenthal, Integrating the fuzzy front end of new product development. Sloan management review, pp.103-120, 1997.

V. D. Lehner and T. A. Defanti, Distributed virtual reality: supporting remote collaboration in vehicle design, IEEE Computer Graphics and Applications, vol.17, issue.2, pp.13-17, 1997.
DOI : 10.1109/38.574654

L. Masson, P. Weil, B. Hatchuel, and A. , Les processus d'innovation : Conception innovante et croissance des entreprises, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00830210

L. Masson, P. Weil, and B. , Aux sources de la R&D : gen??se des th??ories de la conception r??gl??e en Allemagne (1840-1960), Entreprises et histoire, vol.58, issue.1, pp.11-50, 2010.
DOI : 10.3917/eh.058.0011

L. Masson, P. Hatchuel, A. Weil, and B. , The interplay between creativity issues and design theories : a new perspective for design management studies ? Creativity and Innovation Management, pp.217-237, 2011.

R. F. Loewy, La laideur se vend mal, 1963.

G. Lojacono and G. Zaccai, The evolution of the design-inspired enterprise, Sloan Management Review, vol.45, pp.75-79, 2012.

T. Lubart, How can computers be partners in the creative process: Classification and commentary on the Special Issue, International Journal of Human-Computer Studies, vol.63, issue.4-5, pp.365-369, 2005.
DOI : 10.1016/j.ijhcs.2005.04.002

M. Mahdjoub, D. Monticolo, S. Gomes, and J. C. Sagot, A collaborative Design for Usability approach supported by Virtual Reality and a Multi-Agent System embedded in a PLM environment, Computer-Aided Design, vol.42, issue.5, pp.402-413, 2010.
DOI : 10.1016/j.cad.2009.02.009

S. Mahmoud-jouini, G. Garel, and C. Midler, Time-to-market vs. time-to-delivery, International Journal of Project Management, vol.22, issue.5, pp.359-367, 2004.
DOI : 10.1016/j.ijproman.2003.10.001
URL : https://hal.archives-ouvertes.fr/hal-00278162

T. Maldonado, New developments in industry and the training of designers, 1960.

P. Micheli, J. Jaina, K. Goffin, F. Lemke, and R. Verganti, Perceptions of Industrial Design: The ???Means??? and the ???Ends???, Journal of Product Innovation Management, vol.11, issue.4, pp.687-704, 2012.
DOI : 10.1111/j.1540-5885.2012.00937.x

C. Midler, L'auto qui n'existait pas : management des projets et transformation de l'entreprise, 1993.

J. Moisdon, Du mode d'existence des outils de gestion, 1997.

B. B. Mozota, Design management. Paris : Éditions d'Organi- sation, 2002.

L. Nadel and M. Piattelli-palmarini, What is cognitive science. Encyclopedia of cognitive science, 2003.

M. Nagamachi, Kansei engineering as a powerful consumer-oriented technology for product development, Applied Ergonomics, vol.33, issue.3, pp.289-294, 2002.
DOI : 10.1016/S0003-6870(02)00019-4

D. A. Norman and R. Verganti, Incremental and Radical Innovation: Design Research vs. Technology and Meaning Change, Design Issues, vol.2010, issue.1, pp.78-96, 2012.
DOI : 10.1145/1699775.1699784

B. Nussbaum, R. Berner, and D. Brady, Get creative, Business Week, vol.3945, pp.60-68, 2005.

G. Pahl and W. Beitz, Engineering design : A Systematic Approach Third Edition, 2007.

P. B. Paulus and B. A. Nijstad, Group creativity : Innovation through collaboration, 2003.

L. Rampino, The innovation pyramid : A categorization of the innovation phenomenon in the product-design field, International Journal of Design, vol.5, pp.3-16, 2011.

V. Rieuf, Impact of the Immersive Experience on Kansei During Early Immersive Doctoral dissertation. Arts et Métiers ParisTech Dilemmas in a general theory of planning, Policy Sciences, vol.88, issue.4, pp.155-169, 1973.

D. G. Reinertsen, Taking the fuzziness out of the fuzzy front end. Research-Technology Management, pp.25-31, 1999.

R. Roy, Case studies of creativity in innovative product development, Design Studies, vol.14, issue.4, pp.423-443, 1993.
DOI : 10.1016/0142-694X(93)80016-6

D. A. Schön, The Reflective Practitioner: How Professionals Think in Action, The Journal of Continuing Higher Education, vol.34, issue.3, 1983.
DOI : 10.1080/07377366.1986.10401080

D. A. Schön, Educating the reflective practitioner, 1987.

O. Shai and Y. Reich, Infused design. II. Practice, Research in Engineering Design, vol.15, pp.108-121, 2004.
DOI : 10.1007/s00163-004-0048-6

M. Slater, Place illusion and plausibility can lead to realistic behaviour in immersive virtual environments, Philosophical Transactions of the Royal Society B: Biological Sciences, vol.191, issue.51, pp.3549-3557, 2009.
DOI : 10.1192/bjp.191.51.s63

S. M. Smith, T. B. Ward, and J. S. Schumacher, Constraining effects of examples in a creative generation task, Memory & Cognition, vol.110, issue.6, pp.837-845, 1993.
DOI : 10.3758/BF03202751

S. M. Smith, T. B. Ward, and R. A. Finke, The Creative Cognition Approach, 1995.

A. C. Smith, Complexity theory for organisational futures studies, Foresight, vol.7, issue.3, pp.22-30, 2005.
DOI : 10.1108/14636680510601959

N. P. Suh, Principles of Design, 1990.

M. Suwa and B. Tversky, What architects see in their sketches, Conference companion on Human factors in computing systems common ground, CHI '96, pp.191-192, 1996.
DOI : 10.1145/257089.257255

M. Suwa and B. Tversky, External Representations Contribute to the Dynamic Construction of Ideas, Diagrammatic representation and inference, 2002.
DOI : 10.1007/3-540-46037-3_33

K. S. Swan and M. Luchs, From the Special Issue Editors: Product Design Research and Practice: Past, Present and Future, Journal of Product Innovation Management, vol.35, issue.(4, pp.321-326, 2011.
DOI : 10.1111/j.1540-5885.2011.00800.x

H. Takeda, P. Veerkamp, and H. Yoshikawa, Modeling design process . AI magazine, pp.37-48, 1990.

S. Tornincasa, D. Monaco, and F. , The future and the evolution of CAD, Proceedings of the 14th international research/expert conference : trends in the development of machinery and associated technology, 2010.

M. Tovey, Styling and design: intuition and analysis in industrial design, Design Studies, vol.18, issue.1, pp.5-31, 1997.
DOI : 10.1016/S0142-694X(96)00006-3

M. Tovey, Concept design CAD for the automotive industry, Journal of Engineering Design, vol.13, issue.1, pp.5-18, 2002.
DOI : 10.1016/S0142-694X(97)00016-1

D. G. Ullman, The Mechanical Design Process Third edition, 2003.

A. B. Tucker, Computer science handbook, Boca Raton, 2004.

K. Vredenburg, S. Isensee, and C. Righi, User-Centered Design : An Integrated Approach, 2001.

R. Verganti, Design driven innovation : changing the rules of competition by radically innovating what things mean, 2009.
DOI : 10.1093/oxfordhb/9780199694945.013.006

R. W. Veryzer and B. Borja-de-mozota, The Impact of User-Oriented Design on New Product Development: An Examination of Fundamental Relationships*, Journal of Product Innovation Management, vol.36, issue.7, pp.128-143, 2005.
DOI : 10.1086/209516

V. Stamm and B. , Managing innovation, design and creativity, 2008.

S. Warburton and M. P. García, 3D design and collaboration in massively multi-user virtual environments (MUVEs). Cases on collaboration in virtual learning environments : processes and interactions, pp.27-41, 2010.

T. B. Ward, Structured Imagination: the Role of Category Structure in Exemplar Generation, Cognitive Psychology, vol.27, issue.1, pp.1-40, 1994.
DOI : 10.1006/cogp.1994.1010

T. B. Ward, M. J. Patterson, and C. M. Sifonis, The Role of Specificity and Abstraction in Creative Idea Generation, Creativity Research Journal, vol.31, issue.1, pp.1-9, 2004.
DOI : 10.1006/cogp.1994.1010

R. E. Wendrich, H. Tragter, F. G. Kokkeler, F. J. Houten, and . Van, Bridging the Design Gap : Towards an Intuitive Design Tool, Proceedings of the 26th ICSID World Design Congress and Education Congress, 2009.

J. Whyte, N. Bouchlaghem, A. Thorpe, and R. Mccaffer, From CAD to virtual reality : modeling approaches, data exchange and interactive 3D building design tools. Automation in Construction, pp.43-55, 2000.