D. De, L. De-particule-a-l-'impact, and .. , 178 2.2.1 Détermination de la vitesse de particule par voie numérique, 178 2.2.2 Comparaison de la vitesse simulée avec la vitesse, p.180
URL : https://hal.archives-ouvertes.fr/in2p3-00009592

.. Morphologie-des-cratères-de-rebond, 187 3.2.2 Rendement de projection de la 1 ère couche rebond, p.188

.. Influence-de-la-température-du-substrat, Influence des conditions d'impact sur la répartition énergétique de l'impact, p.226

D. Generale-sur-l-'adherence and .. , 275 2 INFLUENCE, p.276

E. Des, M. Morphologiques, and 6. Substrat-pa6, 278 2.2.1 Modification de surface de substrat par sablage

. Références-bibliographiques-[-ajd04-]-l, B. Ajdelsztajn, G. Jodoin, and J. M. Kim, Schoenung « Cold Spray Deposition of Nanocrystalline Aluminum Alloys, Metallurgical and Materials Transactions A 36, pp.657-666, 2005.

M. Andritsschky and K. , Mass production of thick copper vacuum metalization on plastic parts, Vacuum, vol.82, issue.11, pp.1269-1273, 2008.
DOI : 10.1016/j.vacuum.2008.02.007

H. Assadi, F. Gärtner, T. Stoltenhoff, and H. , Kreye « Bonding mechanism in cold gas spraying, Acta Materialia, vol.15, issue.15, pp.4379-4394, 2003.

M. Berthe, Ducos « Laser Shock Flier Impact Simulation of Particle-Substrate Interactions in Cold Spray », Journal of Thermal Spray Technology, vol.16, issue.4, pp.548-556, 2007.

G. Bae, Y. Xiong, S. Kumar, K. Kang, and C. , General aspects of interface bonding in kinetic sprayed coatings, Acta Materialia, vol.56, issue.17, pp.4858-4868, 2008.
DOI : 10.1016/j.actamat.2008.06.003

. [. Beauvais, Thèse de Doctorat de l'école nationale supérieure des mines de Paris « Etude de l'influence de la porosité sur les propriétés électriques de dépôts réalisés par projection plasma, 2003.

G. [. Beydon and Y. Bernhart, Measurement of metallic coatings adhesion to fibre reinforced plastic materials, Surface and Coatings Technology, vol.126, issue.1, pp.39-47, 2000.
DOI : 10.1016/S0257-8972(00)00516-8

K. Binder, J. Gottschalk, M. Kollenda, F. Gärtner, and T. Klassen, Influence of Impact Angle and Gas Temperature on Mechanical Properties of Titanium Cold Spray Deposits, Journal of Thermal Spray Technology, vol.4, issue.1-2, pp.234-242, 2011.
DOI : 10.1007/s11666-010-9557-1

V. [. Bolesta, M. R. Fomin, and B. P. Sharafutdinov, Tolochko « Investigation of interface boundary occurring during cold gas-dynamic spraying of metallic particles ». Nuclear Instruments and Methods in Physics Research Section A Accelerators Spectrometers Detectors and Associated Equipment 470, pp.1-2, 2001.

F. [. Borchers, T. Gärtner, H. Stoltenhoff, and H. Assadi, Kreye « Microstructural and macroscopic properties of cold sprayed copper coatings », Journal of Applied Physics, vol.93, issue.12, 2003.

J. Brandrup, E. H. Immergut, and E. A. Grulke, Polymer handbook, 1999.

M. Bray, A. Cockburn, and W. , The Laser-assisted Cold Spray process and deposit characterisation, Surface and Coatings Technology, vol.203, issue.19, pp.2851-2857, 2009.
DOI : 10.1016/j.surfcoat.2009.02.135

E. [. Bull, J. Burlacov, L. Jirkovsky, R. Kavan, and R. B. Ballhorn, Berasetegui « An overview of the potential of quantitative coating adhesion measurement by scratch testing Heimann « Cold gas dynamic spraying (CGDS) of TiO 2 (anatase) powders onto poly(sulfone) substrates: microstructural characterisation and photocatalytic efficiency », Tribology International 39, issue 2C633] Standart ASTM C633 « Test Method for Adhesion or Coating Strength of Thermal Spray Coatings», pp.99-114, 2006.

. Cgt, C. Site, . K. Site-dorénavant-non-accessible.-[-cha05-]-v, D. Champagne, P. Helfritch et al., Klotz « Interface Material Mixing Formed by the Deposition of Copper on Aluminum by Means of the Cold Spray Process » [CHA96] Jacques CHATELET -Systèmes optroniques semi-actifs -Application du laser à la granulométrie -Techniques de l'Ingénieur ? e4410 Themochemical Tables, The cold spray materials deposition process Fundamentals and applications, pp.330-334, 1996.

]. D. Randallchri10, S. Christoulis, V. Guetta, M. N. Guipont, J. M. Cinca et al., Jeandin « The Influence of the Substrate on the Deposition of Cold-Sprayed Titanium: An Experimental and Numerical Study » Guilemany « Influence of the particle morphology on the Cold Gas Spray deposition behaviour of titanium on aluminium light alloys » Dlouhy « Influence of plasma and cold spray deposited Ti Layers on high-cycle fatigue properties of Ti6Al4V substrates Sohier « Development of an improved adhesive test method for composite assembly design, Surface and Coatings Technology 205 Cognard, R. Créac'hcades, L. Sohier, P. Davies « Analysis of the nonlinear behavior of adhesives in bonded assemblies?Comparison of TAST and Arcan testsCOL00] M.Colombié et coll. ? Matériaux industriels, pp.1409-1414, 2005.

S. [. Costil, C. Lukat, and C. Verdy, Influence of the Surface State on the Adherence of the Coating: Case of an Alumina Coating Plasma Sprayed on SiC Composites, Journal of Thermal Spray Technology, vol.8, issue.12, pp.68-75, 2011.
DOI : 10.1007/s11666-010-9553-5

Y. [. Kim and S. M. Lee, Study on constitutive relation of AISI 4140 steel subject to large strain at elevated temperatures, Journal of Materials Processing Technology, vol.140, issue.1-3, pp.84-89, 2003.
DOI : 10.1016/S0924-0136(03)00742-8

. [. Dalbin, Pommier «Métallisation des plastiques -Préparation par voie chimique, 2009.

J. Day, X. Huang, and N. L. , Examination of a Grit-Blasting Process for Thermal Spraying Using Statistical Methods, Journal of Thermal Spray Technology, vol.14, issue.4, pp.471-479, 2005.
DOI : 10.1361/105996305X76469

C. Demian, S. Costil, P. Sallamand, A. Soveja, H. Liao et al., Laser densification of organic coating: Effects of laser wavelength, operating parameters and substrate properties, Surface and Coatings Technology, vol.206, issue.16, pp.3526-3533, 2012.
DOI : 10.1016/j.surfcoat.2012.02.032
URL : https://hal.archives-ouvertes.fr/hal-00761195

L. L. Descurninges, Thèse de Doctorat de l'école nationale supérieure des mines de Paris «Influence de l'oxydation des particules de poudres de tantale sur les propriétés des dépôts cold spray, 2013.

M. [. Dykhuizen, Gas Dynamic Principles of Cold Spray, Journal of Thermal Spray Technology, vol.7, issue.2, pp.205-212, 1998.
DOI : 10.1361/105996398770350945

F. H. Fukanuma, N. Ohno, B. Sun, and R. , ESRF, section « Synchrotron-radiation Computed Laminography Huang « In-flight particle velocity measurements with DPV-2000 in cold spray, Surface and Coatings Technology, vol.201, issue.5, 1935.

H. J. Frost and M. F. , Ashby « Deformation-mechanism maps: the plasticity and creep of metals and ceramics, 1982.

A. Ganesan, J. Affi, M. Yamada, and M. , Bonding behavior studies of cold sprayed copper coating on the PVC polymer substrate, Surface and Coatings Technology, vol.207, pp.262-269, 2012.
DOI : 10.1016/j.surfcoat.2012.06.086

M. Gardon, A. Latorre, M. Torrell, S. Dosta, J. Fernandez et al., Cold gas spray titanium coatings onto a biocompatible polymer, Materials Letters, vol.106, pp.97-99, 2013.
DOI : 10.1016/j.matlet.2013.04.115

H. Getu, J. K. Spelt, M. L. Papini-[-gil99-]-d, R. C. Gilmore, R. A. Dykhuizen et al., Conditions leading to the embedding of angular and spherical particules during the solid particules erosion of polymers Roemer « Particle Velocity and Deposition Efficiency in the Cold Spray Process » Legoux « Mechanical property mapping of cold sprayed Ti splats and coatings », Journal of Thermal Spray Technology Journal of Thermal Spray Technology, vol.8, issue.3, pp.159-168, 1999.

L. [. Gonçalcess, P. R. Poulsen, . Gru03-a-]-m, C. L. Grujicic, C. Zhao et al., Ogilby « Mechanism of the temperature-dependant degradation of polyamide 66 films exposed to water Helfritch « Analysis of the impact velocity of powder particles in the cold-gas dynamic-spray process » Helfritch « Computational analysis of the interfacial bonding between feed-powder particles and the substrate in the cold-gas dynamic-spray process » Helfritch « Adiabatic shear instability based mechanism for particles/substrate bonding in the cold-gas dynamic-spray process », Irissou « The Effect of Deposition Conditions on Adhesion Strength of Ti and Ti6Al4V Cold Spray Splats Journal of Thermal Spray Technology 21GUA11] S. Guanhong, H. Xiaodong, J. Jiuxing, S. Yue « Parametric study of Al and Al2O3 ceramic coatings deposited by air plasma spray onto polymer substrate, pp.288-303, 1977.

K. Sakaguchi, «. Ogawa, S. Christoulis, V. Guetta, M. Guipont et al., Jeandin « The Influence of the Substrate on the Deposition of Cold-Sprayed Titanium: An Experimental and Numerical Study » Journal of Thermal Spray Technology 20, issue 3 [HEL06] D. Helfritch, V. Champagne « Optimal Particle Size for the Cold Spray Process Determination of constants and comparison of results for various constitutive models», Journal of Thermal Spray Technology 18 Proceedings of the 2006 ITSCC3.853?C3 Thèse de Doctorat de l'école nationale supérieure des mines de Paris « Métallisation d''un polymère thermoplastique par projection thermique: étude des interactions entre le plasma, les particules projetées et le substrat dans le cas de dépôt d'aluminium sur polyétylènetéréphtalate (PET) « Bonding Mechanisms in Cold Spraying: The Contributions of Metallurgical and Mechanical Components ». Journal of Thermal Spray Technology 18, pp.342-523, 1991.

T. Hussain, D. G. Mccartney, and P. H. , Shipway « Impact phenomena in cold spraying of titanium onto various ferrous alloys», Surface and Coatings Technology, vol.205, pp.21-22, 2011.

E. Irissou, J. G. Legoux, A. N. Ryabinin, B. Jodoin, and C. Moreau, Review on Cold Spray Process and Technology: Part I???Intellectual Property, Review on Cold Spray Process and Technology: Part I?Intellectual Property, pp.495-516, 2008.
DOI : 10.1007/s11666-008-9203-3

B. Jodoin, F. Raletz, and M. , Vardelle « Cold spray modeling and validation using an optical diagnostic method, Surface and Coatings Technology, vol.200, pp.14-15, 2006.
DOI : 10.1016/j.surfcoat.2005.02.209

G. R. Johnson and W. H. , Cook « A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures, Proceedings of the seventh International Symposium on Ballistics, pp.541-547, 1983.

[. H. Kim, M. W. Watanabe, and S. , Thermal softening effect on the deposition efficiency and microstructure of warm sprayed metallic powder, Scripta Materialia, vol.60, issue.8, pp.710-713, 2008.
DOI : 10.1016/j.scriptamat.2008.12.050

[. H. Kim, M. Watanabe, J. Kawakita, and S. , Grain refinement in a single titanium powder particle impacted at high velocity, Scripta Materialia, vol.59, issue.7, pp.768-771, 2008.
DOI : 10.1016/j.scriptamat.2008.06.020

K. Kim, M. Watanabe, K. Mitsuishi, K. Iakoubovskii, and S. , Impact bonding and rebounding between kinetically sprayed titanium particle and steel substrate revealed by high-resolution electron microscopy, Journal of Physics D: Applied Physics, vol.42, issue.6, pp.65304-65308, 2009.
DOI : 10.1088/0022-3727/42/6/065304

[. K. Kim, M. Watanabe, J. Kawakita, and S. , Effects of Temperature of In-flight Particles on Bonding and Microstructure in Warm-Sprayed Titanium Deposits, Journal of Thermal Spray Technology, vol.15, issue.4, pp.392-400, 2009.
DOI : 10.1007/s11666-009-9303-8

[. H. Kim, M. Watanabe, and S. Kuroda, Bonding mechanisms of thermally softened metallic powder particles and substrates impacted at high velocity, Surface and Coatings Technology, vol.204, issue.14, pp.2175-2180, 2010.
DOI : 10.1016/j.surfcoat.2009.12.001

[. H. Kim, S. Kuroda, and M. Watanabe, Microstructural Development and Deposition Behavior of Titanium Powder Particles in Warm Spraying Process: From Single Splat to Coating, Journal of Thermal Spray Technology, vol.19, issue.3, pp.1244-1254, 2010.
DOI : 10.1007/s11666-010-9532-x

«. [. Kinloch, ». Adhesion, . Science, H. C. Chapman, G. King et al., Jahedi « Embedment of copper particles into polymers by cold spray Interface melding in cold spray titanium particle impact Rein « Cold spray deposition: Significance of particle impact phenomena ». Aerospace Science and Technology 9, issue 7 Klassen « Formation of cold sprayed ceramic titanium dioxide layers on metal surfaces » Lee « Deposition characteristics of copper particles on roughened substrates through kinetic spraying » « Laser surface texturing (LST) treatment before thermal spraying: a new process to improve the substrate-coating adherence surface par texturation laser : une alternative " propre " de préparation de surface pour la projection thermique ? « Correlation between Al2O3 particles and interface of Al?Al2O3 coatings by cold spray » Moreau « Effect of substrate temperature on the formation mechanism of cold sprayed aluminium, zinc and tin coating, Lee « An Experimental and Finite Element Study of Cold Spray Copper Impact onto Two Aluminum Substrates « Effect of gas temperature on critical velocity and deposition characteristicsLi03] C.J Li, W.Y. Li « Deposition characteristics of titanium coating in cold spraying Li, H. Liao, C.-J. Li, H.-S. Bang, C. Coddet « Numerical simulation of deformation behaviour of Al particles impacting on Al substrate and effect of surface oxide films on interfacial bonding in cold spraying, pp.620-634, 1987.

[. Li, C. Zhang, X. P. Guo, G. Zhang, H. L. Liao et al., Effect of standoff distance on coating deposition characteristics in cold spraying, Coddet « Effect of standoff distance on coating deposition characteristics in cold spraying, pp.297-304, 2008.
DOI : 10.1016/j.matdes.2007.02.005

W. Y. Li, C. Z. Zhang, C. J. Li, and H. , Liao « Modeling aspects of high velocity impact of particles in cold spraying by explicit finite element analysis, Journal of Thermal Spray Technology, vol.18, pp.5-6, 2009.

R. Lupoi and W. , O'Neill « Deposition of metallic coatings on polymer surfaces using cold spray, Surface and Coatings Technology, vol.205, 2010.

. [. Marcellan, Thèse de Doctorat de l'école nationale supérieure des Mines de Paris « Microstructure, micromécanismes et comportement à la rupture de fibres PA6, 2003.

T. Marrocco, D. G. Mccartney, P. H. Shipway, and A. J. , Production of Titanium Deposits by Cold-Gas Dynamic Spray: Numerical Modeling and Experimental Characterization, Journal of Thermal Spray Technology, vol.15, issue.2, pp.263-272, 2006.
DOI : 10.1361/105996306X108219

H. W. Meyer-jr and D. S. , Modeling the high strain rate behavior of titanium undergoing ballistic impact and penetration, International Journal of Impact Engineering, vol.26, issue.1-10, pp.509-521, 2001.
DOI : 10.1016/S0734-743X(01)00107-5

M. A. Meyers, D. J. Benson, O. Vöhringer, B. K. Kad, Q. Xue et al., Constitutive description of dynamic deformation: physically-based mechanisms, Materials Science and Engineering: A, vol.322, issue.1-2, pp.194-216, 2002.
DOI : 10.1016/S0921-5093(01)01131-5

V. F. Nesterenko, M. A. Meyers, J. C. Lasalvia, M. P. Bondar, Y. J. Chen et al., Lukyanov « Shear localization and recrystallization in high-strain, high-strain-rate deformation of tantalum, Materials Science and Engineering: A 229, pp.1-2, 1997.

M. Niinomi, Mechanical biocompatibilities of titanium alloys for biomedical applications, Journal of the Mechanical Behavior of Biomedical Materials, vol.1, issue.1, pp.30-42, 2008.
DOI : 10.1016/j.jmbbm.2007.07.001

K. Ogawa, K. Ito, K. Ichikawa, S. Ohno, and N. , Onda « Characterization of low-pressure cold-sprayed aluminium coatings », Journal of Thermal Spray Technology, vol.17, pp.5-6, 2008.

A. Papyrin, Cold Spray Technology, p.328, 2007.

J. Pattison, S. Celotto, A. Khan, and W. , Standoff distance and bow shock phenomena in the Cold Spray process, Surface and Coatings Technology, vol.202, issue.8, pp.1443-1454, 2008.
DOI : 10.1016/j.surfcoat.2007.06.065

S. [. Petit-boileau-phan, S. H. Zahiri, M. Masood, S. H. Phan, M. Z. Masood et al., Jahedi « Finite Element Analysis of Cooling Time and Residual Strains in Cold Spray Deposited Titanium Particles ». Engineering and Technology 68 Zahiri « Residual Stresses in cold spray process using finite element analysis Legoux « A laser thermal cycling rig as a new method to characterize the evolution of coating adhesion under thermal cycle Seshachayulu « Processing maps for hot working of titanium alloys ». Materials Science and Engineering: A 243, issue 1-2 [ROL10] G. Rolland ? Thèse de Doctorat de l'école nationale supérieure des mines de Paris « Elaboration et étude de l'endommagement de dépôts composites obtenus par projection dynamique par gaz froid (cold spray) : application aux contacts électriques Kreye « Development of a generalized parameter window for cold spray deposition » Lee « Effect of particle parameters on the deposition characteristics of a hard/soft-particles composite in kinetic spraying « Deposition behavior of thermally softened copper particles in cold spraying Smurov « Velocity of the particles accelerated by a cold spray micronozzle: experimental measurements and numerical simulation, Thèse de Doctorat de l'université Paris 6 « Préparation de surface du PET avant métallisation : étude et comparaison des procédés laser excimère et plasma horséquilibre Proceedings of the ITSC pp 137-142SOV09] A. Sova, A. Papyrin, I. Smurov « Influence of Ceramic Powder Size on Process of Cermet Coating Formation by Cold Spray. Smurov « Preliminary study on deposition of aluminium and copper powders by cold spray micronozzle using helium ». Surface and Coatings Technology Zhang « Optimisation of stainless steel cold spray coatings using mixed particle size distributions ». Surface and Coatings Technology 205SPE12] K. Spencer, V. Luzin, N. Matthews, M.-X. Zhang « Residual stresses in cold spray Al coatings: The effect of alloying and of process parameters ». Surface and Coatings Technology, pp.1764-1768, 1998.

T. Stoltenhoff, H. Kreye, and H. J. , An Analysis of the Cold Spray Process and Its Coatings, Journal of Thermal Spray Technology, vol.11, issue.4, pp.542-550, 2002.
DOI : 10.1361/105996302770348682

. A. Stu06, B. Sturgeon, S. Dunn, and B. Celotto, O'Neill « Cold sprayed coatings for polymer composite substrates, Proc. of the 10th ISMSE & the 8th ICPMSE, pp.19-23

[. Suo, M. Yu, M. P. Planche, and H. , Liao « Effect of substrate preheating on bonding strength of cold-sprayed Mg coatings, Proceedings from ITSC, 2012.

M. [. Tran-cong and E. E. Gay, Michaelides « Drag coefficient of irregularly shaped particles ». Powder Tech, pp.21-32, 2004.

V. Ulianitsky, A. Shtertser, S. Zlobin, and I. , Smurov « Metallization of Plastics by Detonation Spraying, Proc. of the 10th EPNM, 2010.

J. Voyer, P. Schulz, and M. , Schreiber « Electrically Conductive Flame Sprayed Aluminum Coatings on Textile Substrates », Journal of Thermal Spray Technology, vol.17, pp.5-6, 2008.

J. Vlcek, L. Gimeno, H. Huber, and E. , A Systematic Approach to Material Eligibility for the Cold-Spray Process, Journal of Thermal Spray Technology, vol.14, issue.1, pp.125-133, 2005.
DOI : 10.1361/10599630522738

Q. Wang, K. Spencer, N. Birbilis, and M. Zhang, The influence of ceramic particles on bond strength of cold spray composite coatings on AZ91 alloy substrate, Surface and Coatings Technology, vol.205, issue.1, pp.50-56, 2010.
DOI : 10.1016/j.surfcoat.2010.06.008

Q. Wang, N. Birbilis, and M. Zhang, Interfacial structure between particles in an aluminum deposit produced by cold spray, Materials Letters, vol.65, issue.11, pp.1576-1578, 2011.
DOI : 10.1016/j.matlet.2011.03.035

Y. Watanabe, Y. Ichikawa, I. Nonaka, and H. , Miura « Characterization of Cold-Sprayed Copper Coatings with New Evaluation Parameter of EBSD Method, Proceedings of the International Thermal Spray Conference, pp.13-15, 2013.

H. Weiss and «. , Adhesion of advanced overlay coatings: mechanisms and quantitative assessment, Surface and Coatings Technology, vol.71, issue.2, pp.201-207, 1995.
DOI : 10.1016/0257-8972(94)01022-B

Y. Xiong, G. Bae, X. Xiong, and C. , The Effects of Successive Impacts and Cold Welds on the Deposition Onset of Cold Spray Coatings, Journal of Thermal Spray Technology, vol.7, issue.3, pp.575-585, 2010.
DOI : 10.1007/s11666-009-9455-6

I. Weiss, S. L. Wong, A. Rezaeian, E. Irissou, J. G. Legoux et al., Influence of Helium and Nitrogen Gases on the Properties of Cold Gas Dynamic Sprayed Pure Titanium Coatings Lee « The rebound phenomenon in kinetic spraying deposition » Lee« Measurement of particle velocity and characterization of deposition in aluminum alloy kinetic spraying process » Hutchings « Cold spray deposition of thermoplastic powder Jie « Deformation behavior of the oxide film on the surface of cold sprayed powder particle » Coddet « Deposition behaviour of thermally softened copper particles in cold spraying » « Elimination of porosity in directly fabricated titanium via cold gas dynamic spraying » Jahedi « Recrystallization of Cold Spray-Fabricated CP Titanium Structures » McCartney « Cold Gas Dynamic Spraying of aluminium: The role of substrate characteristics in deposit formation, Thermomechanical processing of alpha titanium alloys ? an overview ». Materials Science and Engineering: A 263 Zahiri, C.I. Antonio, M. Jahedi « Elimination of porosity in directly fabricated titanium via cold gas dynamic spraying ». Journal of Materials Processong Technology 209 « Cold Gas dynamic spraying of aluminium : the role of substrate characteristics in deposit formation Preparation of metallic coatings on polymer matrix composites by cold spray ». Surface and Coatings Technology, pp.243-256, 1140.

M. [. Ziemian, B. D. Sharma, T. Bouffard, and T. J. Nissley, Effect of substrate surface roughening and cold spray coating on the fatigue life of AA2024 specimens, Materials & Design (1980-2015), vol.54, pp.212-221, 2014.
DOI : 10.1016/j.matdes.2013.08.061

Y. Zou, W. Q. Irissou, J. Legoux, S. Yue, and J. A. , Dynamic recrystallization in the particle/particle interfacial region of cold-sprayed nickel coating: Electron backscatter diffraction characterization, Scripta Materialia, vol.61, issue.9, pp.899-902, 2009.
DOI : 10.1016/j.scriptamat.2009.07.020

D. Avec-comité-de-relecture, F. Giraud, F. Delloro, M. Borit, C. Jeandin et al., Experimental and numerical analysis of titanium particle impact onto a Ti-6Al-4V substrate in cold spray, 2014.

D. Giraud, M. H. Berger, M. Jeandin, and G. Colonges, TEM study of cold sprayed titanium particle bonding onto Ti-6Al-4V". Pour être soumis à publication dans, Surface and Coatings Technology, vol.en préparation, 2014.

D. Giraud, F. N-'guyen, M. Jeandin, and J. M. Malhaire, Study of mechanical anchoring and low cohesion zone induced by polymer metallization. Application to aluminum coating onto PA6,6". Pour être soumis à publication dans Journal of Thermal Spray Technology, 2014.

D. Actes-de-congrès-avec-comité-de-relecture, F. Giraud, V. Borit, M. Guipont, and J. M. Jeandin, Malhaire « Metallization of a polymer using cold spray: Application to aluminum coating of Polyamide 66, Proceedings of ITSC (International Thermal Spray Conference), 2012.

B. Brevet and F. , Process of formation of a metal coating on a surface of a thermoplastic substrate, and composite material corresponding