A. P. Alkhimov, V. F. Kosarev, and S. V. Klinkov, The Features of Cold Spray Nozzle Design, Microstructural Characterization of Small-Particle Plasma Spray Coatings, pp.375-381, 1999.
DOI : 10.1361/105996301770349466

T. P. Begtsson and . Johannesson, Characterization of microstructural defects in plasma-sprayed thermal barrier coatings, BER 90] D. BERNARD, « Projection par plasma de la couche céramique de barrière thermiques ZrO 2 - Y 2 O 3 ? Etude des divers mécanismes rentrant en jeu Thèse de doctorat, pp.245-251, 1990.
DOI : 10.1007/BF02646967

A. L. Bianchi, P. Denoirjean, O. Fauchais, and . Postel, Proceedings of the 9 th National Thermal Spray Conference ? Thermal Spray: Practical Solutions for Engineering Problems, 7-11 octobre, Generation of Alumina Plasma Sprayed Coatings on Alumina Substances, pp.749-755, 1996.

. F. Bis-01-]-j, B. Bisson, C. Gauthier, and . Moreau, Effect of Plasma Fluctuations on In-Flight Particle Parameters », Proceedings of the International Thermal Spray Conference ? Thermal Spray 2001 ? New Surfaces for a New Millennium, pub.) ASM Int., Materials Park, pp.715-721, 2001.

G. Blaise, Microscopic and Macroscopic Description of the Polarization of Dielectric Materials. The Concept of Polaron Applied to the Conduction and Trapping of Charges », Le vide ? les couches minces, 1992.

G. Blaise, C. Le, and . Gressus, « Mise en Evidence d'un Claquage des Isolants Associé à la Déstabilisation d'une Charge d'Espace Localisée, C. R. Acad. Sci. Paris, pp.314-1017, 1992.

. G. Bos-79-]-p and . Boswell, « Solidification Models for High Cooling Rates, Metals forum, pp.40-54, 1979.

L. Brown, H. Herman, and R. K. Mccrone, PLASMA-SPRAYED INSULATED METAL SUBSTRATES, Proceedings of the 11 th International Thermal Spraying Conference ? Advances in Thermal Spraying, pp.8-12, 1986.
DOI : 10.1016/B978-0-08-031878-3.50055-1

E. Cartier and P. Pfluger, CAMUS, « Modélisation des propriétés magnétiques de matériaux ferrite et de composites à base de ferrite absorbant le rayonnement électromagnétique, Thèse de doctorat, Ecole Nationale Supérieure des Industries Chimiques, pp.235-241, 1988.

T. W. Clyne and S. C. Gill, Residual Stresses in Thermal Spray Coatings and Their Effect on Interfacial Adhesion: A Review of Recent Work, Journal of Thermal Spray Technology, vol.111, issue.44, pp.401-418, 1996.
DOI : 10.1007/BF02645271

F. E. Cochelin, G. Borit, M. Frot, L. Jeandin, D. Decker et al., Oxidation and Particle Deposition Modeling in Plasma Spraying of Ti-6Al-4V/SiC Fiber Composites, Microstructural and Gas Separation Properties of CVD Modified Mesoporous ?-Alumina Membranes, pp.117-123, 1999.
DOI : 10.1361/105996399770350647

M. J. Coudert, O. Planche, M. Betoule, P. Vardelle, and . Fauchais, « Measurement of Flow Velocity and Correlation to Particle Velocity under Plasma Spraying Conditions, Proceedings of the 5th National Thermal Spray Conference -Thermal Spray Coatings : Research, Design and Applications, 7-11 juin 1993 Bernecki ; (pub.) ASM Int., Materials Park, pp.19-24, 1993.

. C. Gar-95-]-j and . Garmier, « Formation à la projection plasma », documentation Sulzer-Metco, 1995.

L. L. Golonka and . Pawlowski, Ceramic on Metal Substrates Produced by Plasma Spraying for Thick Film Technology, ElectroComponent Science and Technology, vol.10, issue.2-3, pp.143-150, 1983.
DOI : 10.1155/APEC.10.143

R. V. Guipont, M. Mollins, G. Jeandin, . Barbezat, and . Plasma, Sprayed Ti-6Al-4V Coatings in a Reactive Nitrogen Atmosphere up to 250 kPa, Proceedings of the International Thermal Spray Conference, pp.247-252, 1968.
URL : https://hal.archives-ouvertes.fr/hal-01480135

P. J. Harding, S. Mulheran, M. Cirolini, G. Marchese, S. Jacucci-hasui et al., Modeling the deposition process of thermal barrier coatings, Modeling the Deposition Process of Thermal Barrier Coatings On Relation Between Properties of Coating and Spraying Angle in Plasma Jet Spraying », Transaction of National Research Institute for Metals, pp.34-40, 1970.
DOI : 10.1007/BF02648526

. B. Hei-96-]-r, . R. Heimann, M. Henne, E. Mûller, G. Pross et al., Net-Shape Forming of Metallic Bipolar Plates for Planar Solid Oxide Fuel Cells by Induction Plasma Spraying, Applications of Plasma-Sprayed Ceramic Coatings Les revêtements par projection plasma Thermal Spray : Current Status and Future Trends, pp.122-124, 1988.

B. Hirschauer, S. Söderholm, J. Paul, A. S. Flodström, R. C. Large et al., Large area synthesis of thin alumina films by laser ablation, High Field Electronic Properties of SiO 2 », Solid State ElectronicsHUG 79] R. C. HUGHES, « Generation, Transport, and Trapping of Excess Charge Carriers in Czochralski-grown sapphire, pp.285-291251, 1978.
DOI : 10.1016/0169-4332(96)00462-X

C. J. Ilavsky, J. Berndt, and . Karthikeyan, « Mercury Intrusion Porosimetry of Plasma-Sprayed Ceramic, Journal of Materials Science, vol.32, issue.15, pp.3925-3932, 1997.
DOI : 10.1023/A:1018612815364

G. J. Ilavsky, A. J. Long, C. C. Allen, and . Berndt, Evolution of the void structure in plasma-sprayed YSZ deposits during heating, Evolution of the Void in Plasma- Sprayed YSZ Deposits during Heating, pp.215-221, 1999.
DOI : 10.1016/S0921-5093(99)00450-5

S. Janisson, E. Meillot, A. Vardelle, J. F. Coudert, B. Pateyron et al., Plasma Spraying Using Ar-He-H<SUB>2</SUB> Gas Mixtures, Proceedings of the 15 th International Thermal Spray Conference -Thermal Spray: Meeting the Challenges of the 21 th Century ; (éd.) C. Coddet ; (pub.) ASM Int., Materials Park, pp.25-29803, 1998.
DOI : 10.1361/105996399770350232

. H. Jones and . Cooling, Cooling, freezing and substrate impact of droplets formed by rotary atomization, Journal of Physics D: Applied Physics, vol.4, issue.11, pp.1657-1660, 1971.
DOI : 10.1088/0022-3727/4/11/206

]. T. Kanit, S. Forest, I. Galiet, V. Mounoury, and D. Jeulin, Determination of the size of the representative volume element for random composites: statistical and numerical approach, Determination of the Size of the Representative Volume Element for Random Composites : Statistical and Numerical Approach, pp.3647-3679, 2003.
DOI : 10.1016/S0020-7683(03)00143-4

. J. Kim-01-]-h, S. Kim, C. H. Odoul, Y. G. Lee, and . Kweon, The electrical insulation behavior and sealing effects of plasma-sprayed alumina???titania coatings, KIN 60] W. KINGERY, « Introduction to ceramics, pp.293-301, 1960.
DOI : 10.1016/S0257-8972(01)01044-1

]. T. Kos-01, R. Koschlig, and . Lallament, Analysis of Porosity and Cracks in Cross Sections of Plasma Sprayed Oxide Coatings », Proceedings of the International Thermal Spray Conference ? Thermal Spray 2001: New Surfaces for a New Millennium, pub.) ASM Int., Materials Park, pp.627-632, 2001.

F. A. Kröger, Structure and Properties of MgO and Al 2 O 3 ceramics; (éd.) W. D. Kingery; (pub.) The Am, Advances in Ceramics Ceram. Soc, vol.2, issue.10, pp.1-15, 1983.

T. S. Kuroda, S. Dendo, . Kitahara, and . Quenching, Quenching stress in plasma sprayed coatings and its correlation with the deposit microstructure, Journal of Thermal Spray Technology, vol.22, issue.4??? 6, pp.75-84, 1995.
DOI : 10.1007/BF02648531

. J. Li-02-]-c, A. Li, . J. Ohmori, J. Liebault, D. Vallayer et al., Relationships Between the Microstructure and Properties of Thermally Sprayed Deposits, Thèse de doctorat, Ecole Nationale Supérieure des Mines de Saint Etienne How the Trapping of Charges Can Explain the Dielectric Breakdown Performance of Alumina Ceramics, pp.365-374, 1999.
DOI : 10.1361/105996302770348754

J. J. Masalski, J. Gluszek, K. Zabrzeski, P. Nitsch, and . Gluszek, Improvement in corrosion resistance of the 316l stainless steel by means of Al2O3 coatings deposited by the sol-gel method, Improvement in Corrosion Resistance of the 316L Stainless Steel by Means of Al 2 O 3 Coatings Deposit by Sol-Gel Method, pp.186-190, 1999.
DOI : 10.1016/S0040-6090(99)00230-8

S. J. Mizusaki, K. Tsuchiya, H. Waragai, Y. Tagawa, Y. Arai et al., Simple Mathematical Model for the Electrical Conductivity of Highly Porous Ceramics, Simple Mathematical Model for the Electrical Conductivity of Highly Porous Ceramics, pp.109-113, 1996.
DOI : 10.1111/j.1151-2916.1993.tb03645.x

M. Nakamichi, H. Kawamura, R. Oyamada, K. Miyajima, and Y. Harada, « Trial Fabrication of Y 2 O 3 Coating on 316SS, Proceedings of the 14 th International Thermal Spray Conference ? Thermal Spray ? Current Status and Future Trends, pp.22-26, 1995.

T. Nakamura, G. Qian, and C. C. Berndt, Effects of Pores on Mechanical Properties of Plasma-Sprayed Ceramic Coatings, Journal of the American Ceramic Society, vol.80, issue.1, pp.578-584, 2000.
DOI : 10.1111/j.1151-2916.2000.tb01236.x

C. A. Ohmori, . Li, and . Quantitative, Characterization of the Structure of Plasma Sprayed Alumina Coatings by Using Copper Electroplating », Thin Solid Films, pp.241-252, 1962.

M. Pasandideh-fard, V. Pershin, S. Chandra, J. Mostaghimi, B. Splat et al., Splat Shapes in a Thermal Spray Coating Process: Simulations and Experiments, Thermal Spray Coating Process : Simulations and Experiments Study of the Behavior of the Heat Conductivity and Transport Properties of a Simple Reacting System : H 2 ? Ar and H 2 ? Ar ? Air. Dilution Effect in Spraying Process at Atmospheric Pressure, pp.206-217, 1992.
DOI : 10.1361/105996302770348862

G. Patermarakis and K. Moussoutzanis, Formulation of a criterion predicting the development of uniform regular and non-uniform abnormal porous anodic alumina coatings and revealing the mechanisms of their appearance and progress, Corrosion Science, vol.43, issue.8, pp.1433-1464, 2001.
DOI : 10.1016/S0010-938X(00)00161-X

]. T. Pau-02, R. Paul, J. Hartmann, K. H. Heberlein, W. Schoenbach et al., Novel Method for Manufacturing of Micro-Discharge Devises Essen, Allemagne ; (éd.) E. Lugscheider ; (pub.) DVS-German Welding Society, Düsseldorf, Proceedings of the International Thermal Spray Conference The Relationship Between Structure and Dielectric Properties in Plasma- Sprayed Alumina CoatingsPAW 92] L. PAWLOWSKI et P. FAUCHAIS, « Thermal Transport Properties of Thermally Sprayed Coatings, pp.793-796, 1988.

G. P. Pells, Electrical conductivity of alumina in a radiation field at temperatures up to 700??C, Radiation Effects, vol.108, issue.3-4, pp.199-207, 1986.
DOI : 10.1080/00337578608226008

P. Y. Pekshev, I. G. Murzin-s, N. Penn, . Mcn, A. Alford et al., Modelling of porosity of plasma sprayed materials, Modeling of Porosity of Plasma Sprayed Materials Effect of Porosity and Grain Size on the Microwave Dielectric Properties of Sintered Alumina, pp.199-208, 1993.
DOI : 10.1016/0257-8972(93)90252-J

E. Pfender, J. R. Fincke, and R. Spores, Entrainment of cold gas into thermal plasma jets, Entrainment of Cold Gas into Thermal Plasma JetsPRO 99] A. PRONER, « Revêtements par Projection Thermique », (éd.) Techniques de l'Ingénieur, MD, M 1645, pp.529-543, 1991.
DOI : 10.1007/BF01447164

E. Rajamäki, T. Varis, A. Kulkarni, J. Gutleber, A. Vaidya et al., « Parameter Optimization of HVOF Sprayed Alumina and Effect of the Spray Parameters on the Electrical Properties of the Coatings, Proceedings of the International Thermal Spray Conferenceéd.) E. Lugscheider ; (pub.) DVS-German Welding Society, pp.622-626, 2002.

P. Saravanan, V. Selvararjan, S. V. Joshi, and G. Sundararajan, Experimental design and performance analysis of alumina coatings deposited by a detonation spray process, Journal of Physics D: Applied Physics, vol.34, issue.1, pp.131-140, 2001.
DOI : 10.1088/0022-3727/34/1/320

A. Schütze and D. T. Quinto, Pulsed plasma-assisted PVD sputter-deposited alumina thin films, Surface and Coatings Technology, vol.162, issue.2-3, pp.174-182
DOI : 10.1016/S0257-8972(02)00705-3

S. Sodeoka, M. Suzuki, T. Inoue, K. S. Ueno, M. Sodeoka et al., Proceedings of the 14 th International Thermal Spray Conference ? Thermal Spray ? Current Status and Future Trends A. Ohmori ; (pub.) High Temp « Effects of High-Pressure Plasma Spraying for Yttria-Stabilized Zirconia Coating Effect of Spray Parameters on the Plasma in High Pressure Plasma Spraying up to 300 kPa, Plasma Spraying under Controlled Atmosphere up to 300 kPa Proceedings of the 15 th International Thermal Spray Conference -Thermal Spray: Meeting the Challenges of the 21 th Century, 25-29 mai 1998, Nice; (éd.) C. Coddet; (pub.) ASM Int., Materials Park Control of Plasma Sprayed Particles Temperature and Velocity by Chamber Pressure Proceedings of the International Thermal Spray Conference ? Thermal Spray 2001 ? New Surfaces for a New MillenniumSOD 03] S. SODEOKA, M. SUZUKI et T. INOUE, « Effect of Chamber Pressure and Spray Distance on the Plasma Sprayed Alumina Deposition Proceedings of the 2003 International Thermal Spray Conference ? Thermal Spray 2003 ? Advancing the Science and Applying The Technology, pp.22-26, 1995.

S. Vishweswaraiah, B. Jayaraj, T. Du, V. H. Desai, Y. H. Sohn et al., Destructive Microstructural Evaluation of Thermal Barrier Coatings by Electrochemical Impedance Spectroscopy, Proceedings of the 2003 International Thermal Spray Conference ? Thermal Spray 2003 ? Advancing the Science and Applying The Technology Marple et C. Moreau ; (pub.) ASM Int., Materials Park, pp.1487-1493, 2003.

]. B. Wielage, U. Hofmann, S. Steinhäuser, and G. Zimmermann, Improving wear and corrosion resistance of thermal sprayed coatings, Improving Wear and Corrosion Resistance of Thermal Sprayed Coatings, pp.136-138, 1998.
DOI : 10.1179/sur.1998.14.2.136

. G. Wil-92-]-f, H. G. Will, K. H. Delorenzi, and . Janora, Conduction Mechanism of Single-Crystal Alumina, Conduction Mechanism of Single-Crystal Alumina, pp.295-304, 1992.
DOI : 10.1063/1.1731170

H. Yoshimura, H. K. Bowen, K. F. Electrical, H. P. Young, . J. Frederikse-e et al., Electrical Breakdown Strength of Alumina at High Temperatures, MISHRA et M. LOCH, « Low Pressure Plasma Spray Coatings », Thin Solid Films, pp.404-410, 1973.
DOI : 10.1063/1.1729342

. A. Lan-93-]-d, H. M. Lange, S. P. Jennings, . G. Shah-j, S. Legoux et al., Analysis of Surface Roughness Using Confocal Microscopy Adhesion Mechanisms of Arc-Sprayed on Concrete », Proceedings of the 8 th National Thermal Spray Conference ? Advances in Thermal Spray Science and Technology, 11-15 septembre, How the Trapping of Charges Can Explain the Dielectric Breakdown performance of Alumina Ceramics, pp.3879-3884, 1993.

J. Vogelsang and W. Strunz, New interpretation of electrochemical data obtained from organic barrier coatings, Electrochimica Acta, vol.46, issue.24-25, pp.3817-3826
DOI : 10.1016/S0013-4686(01)00668-5

C. Attard, J. Bigarre, and P. Hourquebie, « Determination of the Spatial Distribution of Trapped Charges in Insulators : Application of the Electrostatic Mirror Method to Polymers, IV.6. Références bibliographiques du chapitre IV Proceedings de la 2 nd Conférence sur l'Electrostatique SFE 2000BAR 87] R. BARTNIKAS, « Engineering Dielectrics », 11B Electrical Properties of Solid Insulating Materials -Measurement Techniques, ASTM STP 926, pp.10-11, 1987.

F. M. Fasching, L. E. Prinz, «. Weiss, and . Smart, ???Smart??? coatings: A technical note, Journal of Thermal Spray Technology, vol.1, issue.3, pp.133-136, 1995.
DOI : 10.1007/BF02646101

B. P. Lacombe, G. Baroux, D. R. Beranger, «. Lide, and . Crc, [LID 95, éd.) Les éditions de Physique, Les UllisMEY 03] X. MEYZA, « Relations Microstructures ? Comportement face à l'injection de charges ? Rigidité Diélectrique pour des alumines polycristallines ? Effet de la température et du vieillissement thermique Thèse de doctorat, Ecole Nationale Supérieure des Mines de Saint Etienne, p.14, 1990.

W. H. Mulder, J. H. Sluyters, T. Pajkossy, and L. Nyikos, Tafel current at fractal electrodes, The Relationship Between Structure and Dielectric Properties in Plasma- Sprayed Alumina Coatings, pp.103-115, 1988.
DOI : 10.1016/0022-0728(90)87113-X

B. Vallayer, G. Blaise, D. Treheux, and . Space, Space charge measurement in a dielectric material after irradiation with a 30 kV electron beam: Application to single-crystals oxide trapping properties, Review of Scientific Instruments, vol.70, issue.7, pp.3102-3112, 1999.
DOI : 10.1063/1.1149887

. G. Bos-79-]-p and . Boswell, « Solidification Models for High Cooling Rates, Metals forum, pp.40-54, 1979.

Z. G. Feng, M. Domaszewski, G. Montavon, and C. Coddet, Finite Element Analysis of Effect of Substrate Surface Roughness on Liquid Droplet Impact and Flattening Process, Journal of Thermal Spray Technology, vol.11, issue.1, pp.62-68, 2000.
DOI : 10.1361/105996302770348989

C. Moreau, P. Gougeon, and M. Lamontagne, Influence of substrate preparation on the flattening and cooling of plasma-sprayed particles, Journal of Thermal Spray Technology, vol.5, issue.1, pp.25-33, 1995.
DOI : 10.1007/BF02648525

C. A. Ohmori, . Li, S. Quantitative, M. Sodeoka, K. Suzuki et al., [SOD 96 « Effects of High-Pressure Plasma Spraying for Yttria-Stabilized Zirconia Coating, Effect of Chamber Pressure and Spray Distance on the Plasma Sprayed Alumina Deposition Proceedings of the 2003 International Thermal Spray Conference ? Thermal Spray 2003 ? Advancing the Science and Applying The Technology, pp.241-252277, 1991.

M. Vardelle, A. Vardelle, and P. Fauchais, Spray parameters and particle behavior relationships during plasma spraying, Handbook of Chemistry and Physics ? 1st Student Edition, pp.79-91, 1987.
DOI : 10.1007/BF02647426

A. Giroud, C. Jouanny, J. L. Heuze, F. Gaillard, and P. Guiraldenq, « Friction and Corrosion Behavior of Different Ceramic Coatings (Oxides) Obtained by Thermal Spray for Qualification Tests in Sea Water, Proceedings of the 15 th International Thermal Spray Conference-Thermal Spray: Meeting the Challenges of the 21 th Century, 25-29 mai 1998, Nice ; (éd.) C. Coddet ; (pub.) ASM Int., Materials Park, pp.211-216, 1998.

K. T. Oh, Y. S. Park, and . Plasma, Plasma-sprayed coating of hydroxylapatite on super austenitic stainless steels, Sprayed Coating of Hydroxylapatite on Super Austenitic Stainless Steels, pp.4-12, 1998.
DOI : 10.1016/S0257-8972(98)00537-4

C. S. Publications, V. Beauvais, F. Guipont, M. Borit, M. Jeandin et al., Microstructure-Property Relationships in Controlled Atmosphere Plasma Spraying (CAPS) of Ceramics, Proceedings of the International Thermal Spray Conference ? Thermal Spray 2001: New Surfaces for a New Millennium Lugscheider ; (pub.) ASM Int., Materials Park, pp.479-486, 2001.

S. Beauvais, V. Guipont, F. Borit, M. Jeandin, M. Español et al., Process-microstructure-property relationships in controlled atmosphere plasma spraying of ceramics, Process-Microstructure-Property Relationships in Controlled Atmosphere Plasma Spraying (CAPS) of Ceramics, pp.204-211, 2004.
DOI : 10.1016/j.surfcoat.2003.08.078
URL : https://hal.archives-ouvertes.fr/hal-00164125

V. Guipont, J. P. Fauvarque, S. Beauvais, M. Jeandin, H. Leguyader et al., Coating of Alloy 625 Using Controlled Atmosphere Plasma Spraying for Sea Water Corrosion Protection, Proceedings of the 2003 International Thermal Spray Conference ? Thermal Spray 2003 ? Advancing the Science and Applying The Technology Marple et C. Moreau ; (pub.) ASM Int., Materials Park, pp.661-669, 2003.

S. Beauvais, V. Guipont, M. Jeandin, D. Juve, D. Treheux et al., « Study of the Influence of Microstructure on Electric Properties of Plasma-Sprayed Alumina Coatings Using the Scanning Electron Microscope Mirror Effect (SEMME) Method », accepté pour communication lors de : International Thermal Spray Conference & Exposition ITSC, Thermal Spray Solutions, Advances in Technology and Application, pp.10-12, 2004.

S. Beauvais, V. Guipont, F. N. Guyen, M. Jeandin, D. Jeulin et al., « Study of the Porosity in Plasma-Sprayed Alumina through an Innovative 3-Dimensional Simulation of the Coating Build-up », accepté pour communication lors de : International Thermal Spray Conference & Exposition ITSC, Thermal Spray Solutions, Advances in Technology and Application, pp.10-12, 2004.