E. Arzt, Size effects in materials due to microstructural and dimensional constraints: a comparative review, Acta materiala, pp.5611-5626, 1998.
DOI : 10.1016/S1359-6454(98)00231-6

H. J. Frost and M. F. Ashby, « Deformation mechanism maps : the plasticity and creep of metals and ceramics, 1982.

W. W. Mullins, The effect of thermal grooving on grain boundary motion, Acta metallurgica, pp.414-427, 1958.
DOI : 10.1016/0001-6160(58)90020-8

C. V. Thompson, Grain Growth in Thin Films, Annual Review of Materials Science, vol.20, issue.1, pp.245-268, 1990.
DOI : 10.1146/annurev.ms.20.080190.001333

H. J. Frost, C. V. Thompson, and D. T. Walton, Simulation of thin film grain structures???I. Grain growth stagnation, Acta metallurgica et materiala, pp.1455-1462, 1990.
DOI : 10.1016/0956-7151(90)90114-V

P. A. Beck, M. L. Holzworth, and P. R. Sperry, « Effect of a dispersed phase on grain growth in Al-Mn alloys, Transactions of the Metallurgical Society AIME, vol.180, pp.163-193, 1949.

R. Mader, P. Feder, and . Chaudhari, Recrystallization of (001) oriented gold films into (111) orientation, Thin Solid Films, vol.14, issue.1, pp.63-78, 1972.
DOI : 10.1016/0040-6090(72)90370-7

W. A. Miller and W. M. Williams, « Surface-energy-induced secondary recrystallization in Zinc, Journal of the Institute of Metals, vol.93, pp.125-127, 1964.

M. Mclean and H. , Mykura, « Surface energy and the secondary recrystallization of platinum sheet, Acta metallurgica, pp.1291-1297, 1965.

D. J. Srolovitz, G. S. Grest, and M. P. Anderson, Computer simulation of grain growth???V. Abnormal grain growth, Acta metallurgica, pp.2233-2247, 1985.
DOI : 10.1016/0001-6160(85)90185-3

A. D. Rollett, D. J. Srolovitz, and M. Anderson, Simulation and theory of abnormal grain growth???anisotropic grain boundary energies and mobilities, Acta metallurgica, pp.1227-1240, 1989.
DOI : 10.1016/0001-6160(89)90117-X

H. J. Frost, C. V. Thompson, and D. T. Walton, Simulation of thin film grain structures???II. Abnormal grain growth, Acta metallurgica et materiala, pp.779-793, 1992.
DOI : 10.1016/0956-7151(92)90020-F

C. V. Thompson and R. , Carel, « Grain growth and texture evolution in thin films, Materials Science Forum, pp.204-206, 1996.

J. Greiser, P. Müllner, and E. , Arzt, « Orientationally resolved grain size distributions in thin films « The effects of strain annealing on grain boundaries and secure triple junctions in nickel, Mater. Sci. Forum, pp.273-275, 1997.

T. Dillard, « Caractérisation et simulation numérique du comportement mécanique des mousses de nickel : Morphologie 3D, réponse élastoplastique et rupture, 2004.

E. O. Hall, The Deformation and Ageing of Mild Steel: III Discussion of Results, Proc. Phys. Soc. (London), pp.747-753, 1951.
DOI : 10.1088/0370-1301/64/9/303

N. J. Petch, « The cleavage strength of polycrystals, J. Iron Steel Inst, vol.174, pp.25-28, 1953.

Y. Wei and J. W. Hutchinson, Nonlinear delamination mechanics for thin films, Journal of the Mechanics and Physics of Solids, vol.45, issue.7, pp.1137-1159, 1997.
DOI : 10.1016/S0022-5096(96)00122-6

W. D. Nix, Mechanical properties of thin films, Metallurgical Transactions A, vol.130, issue.11, pp.2217-2245, 1989.
DOI : 10.1007/BF02666659

L. B. Freund, The Stability of a Dislocation Threading a Strained Layer on a Substrate, Journal of Applied Mechanics, vol.54, issue.3, pp.553-557, 1987.
DOI : 10.1115/1.3173068

T. G. Nieh and J. Wadsworth, « Hall-Petch relation in nanocrystaline solids, Scripta metallurgica et materiala, pp.955-958, 1991.

C. Xiao, R. A. Mirshams, S. H. Whang, and W. M. Yin, Tensile behavior and fracture in nickel and carbon doped nanocrystalline nickel, Tensile behavior and fracture in nickel and carbon doped nanocrystalline nickel, pp.35-43, 2001.
DOI : 10.1016/S0921-5093(00)01392-7

A. W. Thompson, Yielding in nickel as a function of grain or cell size, Acta Metallurgica, vol.23, issue.11, pp.1337-1342, 1975.
DOI : 10.1016/0001-6160(75)90142-X

B. A. Wilcox and A. H. Clauer, « The role of grain size and shape in strengthening of dispersion hardened nickel alloys », Acta metallurgica, pp.743-757, 1972.

W. E. Warren and A. M. Kraynik, The Linear Elastic Properties of Open-Cell Foams, Journal of Applied Mechanics, vol.55, issue.2, pp.341-346, 1988.
DOI : 10.1115/1.3173680

M. F. Ashby, The mechanical properties of cellular solids, Metallurgical Transactions A, vol.179, issue.9, pp.1755-1769, 1983.
DOI : 10.1007/BF02645546

T. G. Nieh, J. H. Kinney, J. Wadsworth, and A. J. Ladd, « Morphology and elastic properties of aluminium foams produced by a casting technique, Scripta materiala, pp.1487-1494, 1998.

T. Mukai, H. Kanahashi, T. Miyoshi, M. Mabuchi, T. G. Nieh et al., « Experimental study of energy absorption in a close-celled aluminium foam under dynamic loading, Scripta materiala, pp.8-921, 1999.

H. Kanahashi, T. Mukai, Y. Yamada, K. Shimojima, M. Mabuchi et al., « Dynamic compression of an ultra-low density aluminium foam, Materials Science and Engineering A, vol.280, pp.349-353, 2000.

T. Mukai, H. Kanahashi, Y. Yamada, K. Shimojima, M. Mabuchi et al., Dynamic compressive behavior of an ultra-lightweight magnesium foam, Scripta materiala, pp.4-365, 1999.
DOI : 10.1016/S1359-6462(99)00186-4

T. G. Nieh, K. Higashi, and J. Wadsworth, Effect of cell morphology on the compressive properties of open-cell aluminum foams, Materials Science and Engineering: A, vol.283, issue.1-2, pp.105-110, 2000.
DOI : 10.1016/S0921-5093(00)00623-7

F. Delannay, Elastic and plastic properties of mats of sintered fibres, Proceedings Colloque National Journées de Métallurgie des Poudres, pp.243-248, 1998.

F. Delannay, Elastic properties of cellular metals processed by sintering mats of fibres Metal foams and porous metal structures, Proceedings of International Conference, pp.14-16, 1999.

F. Delannay, « Modélisation des propriétés élastiques d'une mousse de fibres métalliques, Proceedings Colloque National Journées d'Automne, p.19, 1998.

V. Goussery, Y. Bienvenu, S. Forest, A. Gourgues, C. Colin et al., Grain Size Effects on the Mechanical Behavior of Open-cell Nickel Foams, Proceedings Int. Conf. Cellular Solids and Metal Foaming Technology, pp.23-25, 2003.
DOI : 10.1002/adem.200405153
URL : https://hal.archives-ouvertes.fr/hal-00165963

P. Shahinian and M. R. , Achter, « A comparison of the creep-rupture properties of nickel in air and in vacuum, Transactions of the Metallurgical Society AIME, vol.215, pp.37-41, 1959.

A. R. Wazzan, Lattice and Grain Boundary Self???Diffusion in Nickel, Journal of Applied Physics, vol.36, issue.11, pp.3596-3599, 1965.
DOI : 10.1063/1.1703047

I. Kaur, W. Gust, and L. Kozma, « Handbook of grain and interphase boundary diffusion data, 1989.

W. R. Upthegrove and M. J. Sinnott, « Grain boundary self-diffusion of nickel, Transactions of the ASM, vol.50, pp.1031-1047, 1958.

E. C. Norman and S. A. Duran, Steady-state creep of pure polycrystalline nickel from 0.3 to 0.55 T m », Acta metallurgica, pp.723-731, 1970.

J. P. Dennison, R. J. Llewellyn, and B. , Wilshire, « The creep behaviour of some dilute nickel alloys at 500 and 600°C », Journal of the Institute of Metals, vol.94, pp.130-134, 1966.

R. F. Canon and J. P. Stark, Analysis of Penetration Data from Grain Boundary Diffusion Experiments, Journal of Applied Physics, vol.40, issue.11, pp.4361-4366, 1969.
DOI : 10.1063/1.1657199

R. F. Canon and J. P. Stark, Grain Boundary Self???Diffusion in Nickel, Journal of Applied Physics, vol.40, issue.11, pp.4366-4373, 1969.
DOI : 10.1063/1.1657200

S. L. Robinson and O. D. Sherby, Mechanical behavior of polycrystalline tungsten at elevated temperature, Acta Metallurgica, vol.17, issue.2, pp.109-125, 1969.
DOI : 10.1016/0001-6160(69)90132-1

M. J. Luton and C. M. Sellars, « Dynamic recrystallization in nickel and nickel-iron alloys during high temperature deformation », Acta metallurgica, pp.1033-1043, 1969.

M. F. Ashby, The mechanical properties of cellular solids, Metallurgical Transactions A, vol.179, issue.9, pp.1755-1769, 1983.
DOI : 10.1007/BF02645546

K. C. Goretta, R. Brezny, C. Q. Dam, D. J. Green, A. R. De-arellano-lopez et al., High temperature mechanical behavior of porous open-cell Al2O3, High temperature mechanical behavior of porous open-cell Al 2 O 3, pp.151-158, 1990.
DOI : 10.1016/0921-5093(90)90145-S

E. W. Andrews, L. J. Gibson, and M. F. Ashby, « The creep of cellular solids », Acta materiala, pp.2853-2863, 1999.

E. W. Andrews, J. Huang, and L. J. Gibson, « Creep behavior of a closed-cell aluminium foam, Acta materiala, pp.2927-2935, 1999.

A. M. Hodge and D. C. Dunand, Measurement and modeling of creep in open-cell NiAl foams, Metallurgical and Materials Transactions A, pp.2353-2363, 2003.
DOI : 10.1007/s11661-003-0298-3

E. Contesti and G. Cailletaud, Description of creep-plasticity interaction with non-unified constitutive equations: application to an austenitic stainless steel, Nuclear Engineering and Design, vol.116, issue.3, pp.265-280, 1989.
DOI : 10.1016/0029-5493(89)90087-3

H. Choe and D. C. Dunand, « Synthesis, structure, and mechanical properties of Ni-Al and Ni-Cr-Al superalloy foams », Acta materiala