A. Références, T. V. , T. , H. A. Et, K. et al., Drillstring vibrations : Comparaison between theory and experiments on a full-scale research drilling rig, IADC/SPE 14760, 1986.

A. , R. A. Éditeur-london, H. Et, P. , and G. , Theory of the Fatigue of Metals Theoretical and numerical aspects of the volumetric approach for the fatigue life in notched components, Int. J. Fatigue, vol.25, pp.67-76, 1939.

A. , S. , C. , S. , C. et al., A comparison of lifetime prediction methods for a thermal fatigue experiment, Int. J. Fatigue, vol.28, pp.692-706, 2005.

A. , S. Et, L. , and A. , Multiple scaling method for the calculation of threaded assemblies, Computer Meth. Appl. Mech. Eng, vol.102, pp.293-317, 1993.

A. , S. , B. , F. , S. et al., Nonlinear Problems of Elasticity Stress distribution in notched structural components under pure bending and combined traction and bending, Fatigue Fract. Engng. Mater. Struct, vol.28, pp.13-23, 1996.

A. , B. , L. , P. Et, M. et al., Fracture mechanics and notch sensitivity, Fatigue Fract. Engng. Mater. Struct, vol.26, pp.257-267, 2003.

A. , B. , M. , G. Et, S. et al., Material fatigue properties for assessing mechanical components weakened by notches and defects, Fatigue Fract. Engng. Mater. Struct, vol.28, pp.83-97, 2004.

B. , A. P-l, T. Et, L. , and S. , A volumetric energy based high cycle multiaxial fatigue criterion, Int. J. Fatigue, vol.25, pp.755-769, 2003.

B. , A. , C. , A. , L. et al., A new approach to the analysis of drillstring fatigue behaviour, 1995.

B. , A. , P. , S. , S. et al., Downhole Tool Serviability Under Dynamic Loads, 1997.

B. , A. , S. , A. , L. et al., Optimization of Rotary- Shouldered Connection Reliability, IADC/SPE, numéro 27535, pp.935-945, 1994.

B. , M. , B. , L. Et, V. et al., Shrink stress density function in conical threaded connections as a function of dimensional tolerances, Materials Engineering ASME, 1992.

B. , A. Et, P. , and I. V. , Efficiency of algorithms for shear stress amplitude calculation in critical plane class fatigue criteria, Computational Materials Science, vol.34, pp.355-368, 2005.

B. , F. P. Et, D. , and W. D. , Stress intensity factor for threaded connections, Engineering Fracture Mechanics, vol.50, issue.4, pp.545-567, 1995.

B. , H. D. Et, O. , and A. , Solutions exactes de fissure d'interface sous contact frottant avec un milieu indéformable, C. R. Mecanique, vol.332, pp.709-716, 2004.

C. , N. , S. , H. , C. et al., A Stick-slip Analysis Based on Rock/Bit Interaction : Theoretical and Experimental Contribution, SPE Drilling Conference, 2000.

C. , E. , B. , A. , C. et al., Fatigue design of structures under thermomechanicla loadings, Fatigue Fract. Engng. Mater. Struct, vol.25, pp.1199-1206, 2001.

C. , J. Et, S. , and Y. , A study of the helical effect on the thread connection by three dimensional finite element analysis, Nuclear Engineering and Design, vol.191, pp.109-116, 1999.

C. , M. Et, M. , and G. , On fatigue limit in the presence of notches : Classical vs. recent unified formulations, Int. J. Fatigue, vol.26, pp.289-298, 2004.

C. , A. , C. , E. , L. et al., A computational approach to thermomechanical fatigue, Int. J. Fatigue, vol.26, pp.805-818, 2004.

C. , A. , V. , K. D. Et, M. et al., A unified approach for high and low cycle fatigue based on shakedown concepts, Fatigue Fract. Engng. Mater. Struct, vol.26, pp.561-568, 2003.

C. , H. J. , P. , H. V. Et, C. et al., Some experiments on the resistance of metals to fatigue under combined stress, 1951.

C. , S. H. Et, M. , and W. D. , Random Vibration in Mechanical Systems, 1963.

K. Et, P. , and Y. V. , High cycle metal fatigue, from theory to applications, CISM Courses and Lectures No. 392, 1999.

D. , P. , B. , A. , F. et al., Independence of the torsional fatigue limit upon a mean shear stress, Int. J. Fatigue, vol.25, pp.471-480, 2003.

D. , F. P. , W. , A. J. Et, A. et al., Experimental and computational studies of low cycle fatigue nucleation in a polycrystal, Int. J. Plasticity, 2006.

F. , S. Et, L. , and P. , Distributions of the elastic principal stress due to notches in finite size plates and rounded bars uniaxially loaded, Int. J. Fatigue, vol.26, pp.377-391, 2004.

G. , G. Et, N. , and J. P. , Drilling Data Handbook. Editions Technip, 1999.

G. , D. Et, P. , and C. , Lois de forabilité et dynamique en torsion du système de forage, 1997.

G. , G. Et, N. , and A. , Universal feature of elastic notch-tip stress field, Int. J. Fatigue, vol.9, issue.3, pp.143-150, 1987.

G. , H. J. Et, P. , and H. V. , The strengths of metal under combined alternating stresses, Proc. Inst. Mech. Engrs, pp.3-54, 1935.

G. , G. Y. Et, K. , and G. L. , Evaluation of API Guidelines for Fatigue of Drillpipe, 1991.

H. , M. H. , D. , N. E. , T. et al., J integral applications for short fatigue cracks at notches, Int. J. Fracture, vol.16, issue.1, pp.15-30, 1980.

H. , S. , K. , M. , B. et al., Fatigue analysis of drillstring threaded connections, 2003.

H. , J. Et, H. , and M. , Drillpipe failures in hydrogen sulfide, Drilling Technology Conference Transactions, 1984.

H. , T. H. , E. , S. , K. et al., An Innovative Design Approach to Reduce Drill String Fatigue, SPE, éditeur : IADC/SPE, 2004.

J. , C. A. , F. , D. B. Et, D. et al., Torque and Drag in Directional Wells -Prediction and Measurement, 1983.

J. , K. L. , R. C. Et, M. , and K. M. , Contacts Mechanics. Cambridge Univ. Press Fundamentals of Machine Component Design, 1985.

K. , M. J. , B. , F. P. Et, D. et al., Effect of residual stress on ACFM crack measuremens in drill collar threaded connections, pp.337-343, 2003.

K. , K. Et, G. , and W. , Model of plastic anisotropy evolution with texturedependent yield surface, Int. J. Plasticity, vol.20, pp.19-54, 2004.

L. , C. E. Et, L. , and L. D. , Predicting the fatigue life of offshore structures by the single moment spectral method, Probabilistique Engineering Mechanics, vol.6, issue.2, 1991.

L. , R. I. , C. , D. H. Et, K. et al., Stick-slip Whirl Interaction in Drillstring Dynamics, J. of Vibration and Acoustics, vol.124, pp.209-220, 2002.

L. , J. Springler, A. L. Berlin, and M. P. , A Course on Damage Mechanics Maximum Permissible Dog-Legs in Rotary Boreholes Infrared thermographic scanning of fatigue in metals, J. Pet, vol.158, pp.363-376, 1961.

L. , M. P. Et, V. , and K. D. , Infrared thermographic evaluation of fatigue limit in metals, Proc. of the 27th QIRT Eurotherm Seminar, 1992.

M. , K. A. Et, D. , and W. F. , Stress analysis of drillstring threaded connections using the finite element method, Engineering Failure Analysis, vol.2, issue.1, pp.1-30, 1995.

M. , A. Et, D. , and F. P. , High and low-cycle fatigue crack initiation using polycrystal plasticity, Proc. Roy. Soc., pages 1881?1903, 2004.

M. , K. Et, G. , and G. , A method of elastic-plastic stress and strain calculation at a notch root, Mat. Sci. Eng, vol.50, issue.1, pp.93-100, 1981.

N. , R. A. , L. , D. B. , N. et al., A critical plane gradient approach for the prediction of notched HCF life, Int. J. Fatigue, vol.27, pp.481-492, 2005.

P. , M. H. Et, V. , and M. A. , Comparisons of drill string cyclic loading due to vibration and dog-legs. I, Mech. Eng, vol.209, pp.17-25, 1995.

P. , X. , P. , A. Et, K. et al., Tools for multiaxial fatigue analysis of structures submitted to random vibrations, European Conference on Spacecraft Structures Materials and Mechanical Testing Braunschweig, 1999.

P. , J. , A. , J. Et, T. et al., Predictive drillpipe fatigue model, 5th Congresso Brasileiro de Petroleo e Conexpo Arpel, 1994.

Q. , D. D. , Y. , M. Et, T. et al., An analysis of notch-size effects at the fatigue limit, J. Testing & Mat, vol.16, issue.4, pp.375-385, 1988.

R. , M. K. , H. , M. Et, R. et al., Survival assessment of die-marked drill-pipes : Integrated static and fatigue analysis, Enggineering Failure Analysis, vol.6, pp.227-299, 1999.

R. , F. Et, V. , and O. , Fatigue des garnitures de forage : Description du modèle analytique pour la réalisation d'un module de fatigue des garnitures de forage, 2003.

S. , U. , P. , M. , P. et al., Advanced assessment of drillpipe fatigue and application to critical well engineering, SPE/IADC Drilling Conference, 2005.

S. , A. Et, M. , and Z. , On the criterion of damage evolution under variable multiaxial stress states, Int. J. Solids & Structures, issue.14, pp.351589-1616, 1998.

S. , P. D. , C. , A. M. , P. et al., Oil Well Drilling : A Vibrations Perspective. The Shock and Vibration Digest, pp.81-99, 2003.

S. , S. , L. Et, T. , and D. , Fatigue of Materials A simplified approach to apply the theory of critical distances to notched components under torsional fatigue loading, Int. J. Fatigue, vol.28, pp.417-430, 1998.

T. , A. Et, D. , and W. , Stress analysis of drillstring threaded connections using the finite element method, Int. J. Fatigue, issue.5, pp.15429-438, 1993.

T. , J. J. , J. , P. Et, B. et al., Conception et fiabilité dans l'industrie automobile, XVème Congrés Français de Mécanique, 2001.

T. , S. Et, G. , J. N. , R. W. Et et al., Theory of Elasticity An integrated model for drill-string dynamics, Journal of Sound and Vibration, vol.224, issue.1, pp.123-165, 1951.

T. , R. H. , T. , K. C. Et, T. et al., SDPT3 -a matlab sofware package for semidefinite-quadratic-linear programming, 2001.

V. , O. , A. , D. Et, P. et al., Projet "fatigue des garnitures de forage" calcul d'une connexion vissée par la méthode des éléments finis et estimation de la durée de vie, 2003.

V. , O. , V. , O. , P. et al., Fatigue of Drillsrtring : State of the Art, Oil & Gaz Sci. and Tech -Rev. IFP, vol.57, issue.1, pp.7-37, 2002.

V. , M. Et, B. , and A. , Design and application of a drill pipe fatigue test facility, Strutural Integrity and Fracture. SIF2004, 2004.

W. , W. Et, M. , and K. M. , Determination of load distribution in a threaded connector with yielding threads, Mech. Mach. Theory, issue.2, pp.31229-244, 1996.

Z. , J. , F. , J. , I. et al., A new approach in inelastic analysis of structures, 1990.

Z. , H. , H. , R. Et, R. et al., Dauerschwingfestigkeit bei nichtsynchroner mehrachsiger beansprunchung, Z. Werkofftech, vol.16, pp.101-112, 1985.

Z. , N. Et, C. , and I. , A high-cycle fatigue criterion with internal variables, Eur. J. Mech., A/Solids, vol.21, pp.597-614, 2002.