Microstructures developed from fusion casting Ceramic microstructures, their analysis, significance and production, Proceedings of the Third Int. Materials, symposium, pp.13-16, 1966. ,
The Use of Phase Diagrams in Fusion-Cast Refractory Materials Research, Phase Diagrams, pp.117-145, 1970. ,
DOI : 10.1016/B978-0-12-053202-5.50012-X
Stress influence on the deformation mechanisms of tetragonal zirconia polycrystals, Ceramics International, vol.18, issue.6, pp.385-390, 1992. ,
DOI : 10.1016/0272-8842(92)90070-T
Intergranular and intragranular behavior of polycrystalline aggregates. Part 1: F.E. model, International Journal of Plasticity, vol.17, issue.4, pp.513-536, 2001. ,
DOI : 10.1016/S0749-6419(00)00061-9
Intergranular and intragranular behavior of polycrystalline aggregates.Part 2: Results, International Journal of Plasticity, vol.17, issue.4, pp.537-563, 2001. ,
DOI : 10.1016/S0749-6419(00)00062-0
Zirconia-Alumina-Silica Refractories, M. AlperIV, vol.5, issue.4, pp.185-208, 1971. ,
DOI : 10.1016/B978-0-12-053304-6.50016-3
A Numerical Treatment of Ring Artefacts for the Microtomographic Image Reconstruction and Porous Media Characterization, 2006. ,
Mécanique non linéaire des matériaux, 2001. ,
Reconstruction d'images de tomographie, 2000. ,
Compuatations of refractory lining structures under thermal loadings, Advances in Engineering Software, pp.487-496, 2002. ,
Homogénéisation en mécanique des matériaux (tome 1), 2001. ,
Modules effectifs de matériaux quasi homogènes et quasi isotropes, constitués d'une matricé elastique et d'inclusionsélastiquesinclusionsélastiques, pp.31-36, 1976. ,
PROMETHEREF: A French Research Program for the Study of Thermomechanical Properties of Industrial Refractories, UNITECR 2003 Proceedings, 8 th biennal worldwide conf. on refractories, pp.513-516, 2003. ,
DOI : 10.4028/www.scientific.net/KEM.264-268.1755
URL : https://hal.archives-ouvertes.fr/hal-00165870
PROMETHEREF: A French Research Program for the Study of Thermomechanical Properties of Industrial Refractories, Key Engineering Materials, vol.264, issue.268, pp.268-1755, 2004. ,
DOI : 10.4028/www.scientific.net/KEM.264-268.1755
URL : https://hal.archives-ouvertes.fr/hal-00165870
Investigation of the thermomechanical properties of industrial refractories: the French programme PROMETHEREF, Journal of Materials Science, vol.33, issue.20???22, 2005. ,
DOI : 10.1007/s10853-008-2534-0
URL : https://hal.archives-ouvertes.fr/hal-00284791
Berechnung verschiedener physikalischer konstanten von heterogenen substanzen, Annalen der Physik, vol.5, pp.636-664, 1935. ,
Mémoire d'habilitationàhabilitationà diriger des recherches, 2002. ,
Synthèse de phase vitreuse, Rapport Saint-Gobain, 2004. ,
Some elements of microstructural mechanics, Computational Materials Science, vol.27, issue.3, pp.351-374, 2003. ,
DOI : 10.1016/S0927-0256(03)00041-7
Size effect on elastic properties of random composites, Engineering Computations, vol.11, issue.2, pp.99-110, 1994. ,
DOI : 10.1108/02644409410799227
Temperature Dependence of the Elastic Moduli of Monoclinic Zirconia, Journal of the American Ceramic Society, vol.12, issue.7, pp.1742-1744, 1991. ,
DOI : 10.1107/S0021889869007217
Creep behaviour of alumina, zirconia and zirconia-toughened alumina, Journal of the European Ceramic Society, vol.17, issue.6, pp.859-864, 1997. ,
DOI : 10.1016/S0955-2219(96)00160-4
The role of diffusion creep in the superplastic deformation of 3 mol% yttria stabilized tetragonal zirconia, Scripta Materialia, vol.42, issue.3, pp.241-248, 2000. ,
DOI : 10.1016/S1359-6462(99)00340-1
Diffusion, diffusion creep and grain growth characteristics of nanocrystalline and fine-grained monoclinic, tetragonal and cubic zirconia, Scripta Materialia, vol.48, issue.6, pp.791-796, 2003. ,
DOI : 10.1016/S1359-6462(02)00519-5
Thermal Stress Analysis of Fused-Cast AZS Refractories during Production: Part I, Industrial Study, Journal of the American Ceramic Society, vol.57, issue.2, pp.1505-1511, 1994. ,
DOI : 10.1111/j.1151-2916.1994.tb09749.x
3D morphological analysis of the connectivity of a porous medium, Acta Stereologica, vol.17, pp.107-112, 1998. ,
Simulation 3D de matériaux aléatoires polycristallins. Revue de Métallurgie-CIT, Science et Génie des Matériaux, pp.271-275, 2000. ,
Evaluation of finite element based analysis of 3D multicrystalline aggregates plasticity, International Journal of Plasticity, vol.21, issue.4, pp.691-722, 2005. ,
DOI : 10.1016/j.ijplas.2004.05.017
URL : https://hal.archives-ouvertes.fr/hal-00165134
Probì emes d'homogénéisation pour des matériaux hétérogènes viscoplastiques, Thèse de Doctorat, 2005. ,
Eutectic of solidification processing, Butterworths Monographs in Materials, 1983. ,
The Determination of the Elastic Field of an Ellipsoidal Inclusion, and Related Problems, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.241, issue.1226, pp.376-396, 1957. ,
DOI : 10.1098/rspa.1957.0133
Implicit Parallel Computing in Structural Mechanics, Computational Mechanics Advances, vol.2, pp.47-72, 1994. ,
Application du calculparalì ele aux modèlesmodèlesà grand nombre de variables internes, Thèse de Doctorat, 1998. ,
Milieux continus généralisés et matériaux hétérogènes, 2006. ,
3D Delaunay mesh generation coupled with an advancing-front approach, Computer Methods in Applied Mechanics and Engineering, vol.157, issue.1-2, pp.115-131, 1998. ,
DOI : 10.1016/S0045-7825(97)00222-3
An algorithm for computing the effective linear elastic properties of heterogeneous materials: Three-dimensional results for composites with equal phase poisson ratios, Journal of the Mechanics and Physics of Solids, vol.43, issue.9, pp.1349-1362, 1995. ,
DOI : 10.1016/0022-5096(95)00050-S
Surface simplification using quadric error metrics, Proceedings of the 24th annual conference on Computer graphics and interactive techniques , SIGGRAPH '97, pp.209-216, 1997. ,
DOI : 10.1145/258734.258849
URL : http://cdserver.icemt.iastate.edu/cd/s97cp/contents/papers/garland/quadrics.pdf
Thermomechanical behaviour analysis and simulation of steel/refractory composite linings, Composites Science and Technology, vol.61, issue.14, pp.2095-2100, 2001. ,
DOI : 10.1016/S0266-3538(01)00155-5
Etude de la solidification de matériaux réfractaires appartenant au système quaternaire Al 2 O 3 -ZrO 2 -SiO 2 -N a 2 O, Thèse de Doctorat, 1996. ,
Triangulation de Delaunay et maillage : Applications auxélémentsauxéléments finis, 1997. ,
Random Subdivisions of Space into Crystals, The Annals of Mathematical Statistics, vol.33, issue.3, pp.958-972, 1962. ,
DOI : 10.1214/aoms/1177704464
Deformation mechanisms for high-temperature creep of high yttria content stabilized zirconia single crystals, Acta Materialia, vol.44, issue.3, pp.991-999, 1996. ,
DOI : 10.1016/1359-6454(95)00254-5
Verres et produits verriers, 1994. ,
Representative volume element size for elastic composites: A numerical study, Journal of the Mechanics and Physics of Solids, vol.45, issue.9, pp.1449-1459, 1997. ,
DOI : 10.1016/S0022-5096(97)00016-1
Finite element modelling of two phase Fe-Cu polycrystals, Computational Materials Science, vol.32, pp.370-377, 2005. ,
Order relationships for boundary conditions effect in heterogeneous bodies smaller than the representative volume, Journal of the Mechanics and Physics of Solids, vol.42, issue.12, pp.1995-2011, 1994. ,
DOI : 10.1016/0022-5096(94)90022-1
Continuum micro-mechanics of elastoplastic polycrystals, Journal of the Mechanics and Physics of Solids, vol.13, issue.2, pp.89-101, 1965. ,
DOI : 10.1016/0022-5096(65)90023-2
Application of variational concepts to size effects in elastic heterogeneous bodies, Journal of the Mechanics and Physics of Solids, vol.38, issue.6, pp.813-841, 1990. ,
DOI : 10.1016/0022-5096(90)90041-2
Binary eutectic solidification, Transactions of the AIME, vol.236, pp.843-852, 1966. ,
Bounds and Self-Consistent Estimates for Creep of Polycrystalline Materials, Proc. R. Soc. Lond. A, pp.101-127, 1976. ,
DOI : 10.1098/rspa.1976.0027
Growth and Perfection of Crystals, 1958. ,
Mechanism of Growth, Liquid Metals and Solidification, p.174, 1958. ,
Crystal Growth Kinetics and Morphology, International Symposium on Special Topics in Ceramics : Kinetics of Reactions in Ionic Systems, pp.229-246, 1967. ,
DOI : 10.1007/978-1-4899-6461-8_12
Transparent compounds that freeze like metals, Acta Metallurgica, vol.13, issue.11, pp.1212-1215, 1965. ,
DOI : 10.1016/0001-6160(65)90061-1
Lamellar and Rod Eutectic Growth, Transactions of the AIME, vol.236, pp.1129-1142, 1966. ,
DOI : 10.1016/B978-0-08-092523-3.50040-X
On the origin of the equiaxed zone in castings, Transactions of the AIME, vol.236, pp.149-157, 1966. ,
Mathematical morphology and multiphase materials, Proc. 3rd European Symposium of Stereology, pp.265-286, 1981. ,
Caractérisation morphologique et modèles de structures aléatoires, 2001. ,
Models of Random Structures, 2004. ,
Notion de Volume Elémentaire Représentatif pour les Matériaux Hétérogènes : Approche Statistique et Numérique, Thèse de Doctorat, 2003. ,
Determination of the size of the representative volume element for random composites: statistical and numerical approach, International Journal of Solids and Structures, vol.40, issue.13-14, pp.3647-3679, 2003. ,
DOI : 10.1016/S0020-7683(03)00143-4
Elastic Constants of Tetragonal Zirconia Measured by a New Powder Diffraction Technique, Journal of the American Ceramic Society, vol.80, issue.6, pp.1682-1684, 1998. ,
DOI : 10.1111/j.1151-2916.1998.tb02533.x
Advanced engineering mathematics, 1988. ,
Zur plastischen verformung des vielkristalls, Acta Metallurgica, vol.9, issue.2, pp.155-161, 1961. ,
DOI : 10.1016/0001-6160(61)90060-8
Fundamentals of solidification, 1988. ,
Axial Thermal Expansion of TetragonaI ZrO, Between 1150?? and 1700??C, Journal of the American Ceramic Society, vol.39, issue.10, pp.641-644, 1964. ,
DOI : 10.1111/j.1151-2916.1964.tb13125.x
Ergodicity and integral range, Journal of Microscopy, vol.161, pp.387-403, 1991. ,
Mécanique des matériaux solides, 1988. ,
Mécanique des matériaux solides, 1996. ,
Morphee, 2004. ,
Solidification -Cristallisation et microstructures, 1986. ,
3D-finite-element-modelling of microstructures with the method of multiphase elements, Computational Materials Science, vol.9, issue.1-2, pp.28-35, 1997. ,
DOI : 10.1016/S0927-0256(97)00055-4
Marching cubes : high resolution 3-D surface reconstruction algorithm, Proceedings of the 14th annual conference on Computer graphics and interactive techniques, pp.163-169, 1987. ,
DOI : 10.1145/37402.37422
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.132.3930
An explanation of the high temperature creep of yttria tetragonal zirconia nanocrystals, Scripta Materialia, vol.50, issue.8, pp.1151-1155, 2004. ,
DOI : 10.1016/j.scriptamat.2004.01.022
Stress and Strain Evolution in Cast Refractory Blocks during Cooling, Journal of the American Ceramic Society, vol.10, issue.4, pp.917-925, 1998. ,
DOI : 10.1111/j.1151-2916.1998.tb02427.x
Numerical study of creep in two-phase aggregates with a large rheology contrast: Implications for the lower mantle, Earth and Planetary Science Letters, vol.237, issue.1-2, pp.223-238, 2005. ,
DOI : 10.1016/j.epsl.2005.06.027
URL : https://hal.archives-ouvertes.fr/hal-00146056
Estimating RVE sizes for 2D/3D viscoplastic composite materials, pp.13-17, 2006. ,
URL : https://hal.archives-ouvertes.fr/hal-00144481
Finite element simulations of the deformation of fused-cast refractories based on X-ray computed tomography, Computational Materials Science, vol.39, issue.1, 2006. ,
DOI : 10.1016/j.commatsci.2006.01.033
URL : https://hal.archives-ouvertes.fr/hal-00140558
Deformation of a Metallic Foam Studied by X-Ray Computed Tomography and Finite Element Calculations, pp.68-73, 1999. ,
DOI : 10.1002/3527606165.ch11
Microstructure and creep properties of alumina/zirconia ceramics, Journal of the European Ceramic Society, vol.15, issue.10, pp.983-988, 1995. ,
DOI : 10.1016/0955-2219(95)00070-B
Etude du fluage de réfractairesréfractairesélectrofondus du système aluminezircone-silice, Thèse de Doctorat, 2005. ,
High temperature mechanical behavior of fused-cast refractories Advances in refractories for the metallurgical industries IV, fourth international symposium, pp.631-644, 2004. ,
Les variables régionalisées et leur estimation, 1965. ,
Eléments pour une théorie des milieux poreux, 1967. ,
The theory of regionalized variables and its applications, Paris School of Mines publications, 1971. ,
Random sets and integral geometry, 1975. ,
A study of the differential scheme for composite materials, International Journal of Engineering Science, vol.15, issue.4, pp.237-244, 1977. ,
DOI : 10.1016/0020-7225(77)90058-1
Lattice-dynamical study of the cubic-tetragonal-monoclinic transformations of zirconia, Physical Review B, vol.55, issue.1, pp.19-22, 1997. ,
DOI : 10.1103/PhysRevB.55.19
A self consistent approach of the large deformation polycrystal viscoplasticity, Acta Metallurgica, vol.35, issue.12, pp.2983-2994, 1987. ,
DOI : 10.1016/0001-6160(87)90297-5
Etude du comportement mécaniquè a haute température de dalles de réfractairesréfractairesélectrofondus riches en zircone, Thèse de Doctorat, 2008. ,
Durabilité de matériaux céramiques pour outillages SPF, Thèse de Doctorat, 2006. ,
Mechanical behavior of ceramic materials for SPF toolings, july -3rd European conference on superplastic forming, pp.7-9, 2004. ,
A differential scheme for the effective moduli of composites, Mechanics of Materials, vol.4, issue.1, pp.1-16, 1985. ,
DOI : 10.1016/0167-6636(85)90002-X
Three-dimensional periodic Voronoi grain models and micromechanical FE-simulations of a two-phase steel, Computational Materials Science, vol.24, issue.4, pp.513-519, 2002. ,
DOI : 10.1016/S0927-0256(02)00156-8
The high temperature mechanical characteristics of superplastic 3 mol% yttria stabilized zirconia, Acta Materialia, vol.46, issue.2, pp.667-679, 1998. ,
DOI : 10.1016/S1359-6454(97)00251-6
The effective mechanical properties of nonlinear isotropic composites, Journal of the Mechanics and Physics of Solids, vol.39, issue.1, pp.45-71, 1991. ,
DOI : 10.1016/0022-5096(91)90030-R
Nonlinear Composites, Advances in Applied Mechanics, pp.171-302, 1998. ,
DOI : 10.1016/S0065-2156(08)70321-1
URL : https://hal.archives-ouvertes.fr/hal-00311888
Etude du comportement thermomécanique d'un béton réfactaire alumineux, Thèse de Doctorat, 2000. ,
Marching cube algorithm: review and trilinear interpolation adaptation for image-based dosimetric models, Computerized Medical Imaging and Graphics, vol.27, issue.5, pp.411-435, 2003. ,
DOI : 10.1016/S0895-6111(03)00032-6
URL : http://ufdc.ufl.edu/LS00001088/00001
Caractérisation et modélisation thermo-mécanique du comportement de bétons réfractaires silico-alumineux ,
The viscosity of suspensions of rigid spheres, British Journal of Applied Physics, vol.3, issue.8, pp.267-269, 1952. ,
DOI : 10.1088/0508-3443/3/8/306
Représentation spectrale en viscoélasticité linéaire des matériaux hétérogènes, Comptes Rendus de l'Académie des Sciences Série II, pp.1517-1522, 1993. ,
On the homogenization and the simulation of random materials, Eur. J. Mech. Solids, vol.11, pp.585-607, 1992. ,
X-ray micro-tomography an attractive characterisation technique in materials science, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol.200, pp.273-286, 2003. ,
DOI : 10.1016/S0168-583X(02)01689-0
URL : https://hal.archives-ouvertes.fr/hal-00475146
Creep behavior of ceramics studied by mechanical loss measurements, Materials Science and Engineering: A, vol.387, issue.389, pp.387-389, 2004. ,
DOI : 10.1016/j.msea.2004.02.087
A self???similar model for sedimentary rocks with application to the dielectric constant of fused glass beads, GEOPHYSICS, vol.46, issue.5, pp.781-795, 1981. ,
DOI : 10.1190/1.1441215
IntroductionàIntroductionà la morphologie mathématique, Cahiers CMM Fontainebleau, 1969. ,
Image Analysis and Mathematical Morphology, 1982. ,
Chemical stability of yttria doped zirconia membranes in acid and basic aqueous solutions: chemical properties, effect of annealing and ageing time, Ceramics International, vol.27, issue.3, pp.299-307, 2001. ,
DOI : 10.1016/S0272-8842(00)00080-8
Experimental and numerical characterisation of in-plane deformation in two-phase materials, Computational Materials Science, vol.21, issue.3, pp.261-275, 2001. ,
DOI : 10.1016/S0927-0256(01)00170-7
URL : https://hal.archives-ouvertes.fr/hal-00111335
Les contraintes thermiques dans les vitrages : ´ evaluation et décision, Centre Scientifique et Technique de la Construction (CSTC), pp.1-20, 2004. ,
An introduction to zirconia : zirconia and zirconia ceramics, 1986. ,
Overall potentials and extremal surfaces of power law or ideally plastic composites, Journal of the Mechanics and Physics of Solids, vol.41, issue.6, pp.981-1002, 1993. ,
DOI : 10.1016/0022-5096(93)90051-G
Continuum micromechanics. CISM Courses and Lectures No, 1997. ,
Plastic strain in metals, Journal of the Institute of Metals, vol.62, pp.307-324, 1938. ,
Random Heterogeneous Materials, 2002. ,
DOI : 10.1007/978-1-4757-6355-3
Le renforcement et la fissuration du carbure et du nitrure de silicium : une approche locale du comportement viscoplastique, Thèse de Doctorat, 1988. ,
Modelling of fused cast alumina refractory, British Ceramic Transactions, vol.38, issue.1, pp.62-70, 1999. ,
DOI : 10.1111/j.1151-2916.1994.tb09750.x
Computational biomechanical modelling of the lumbar spine using marching-cubes surface smoothened finite element voxel meshing, Computer Methods and Programs in Biomedicine, vol.80, issue.1, pp.25-35, 2005. ,
DOI : 10.1016/j.cmpb.2005.06.006
IntroductionàIntroductionà la solidification des métaux, 1971. ,
PropriétésPropriétésélastiques et inélastiques de bétons réfractaires et réfractairesréfractairesélectrofondus, 2006. ,
Finite element modelling of the actual structure of cellular materials determined by X-ray tomography, Acta Materialia, vol.53, issue.3, pp.719-730, 2005. ,
DOI : 10.1016/j.actamat.2004.10.024
URL : https://hal.archives-ouvertes.fr/hal-00436799
Les Electrofondus. Rapport Saint-Gobain, 1994. ,
Modelling stress-dependent tranformation strains of heterogeneous materials, Transformation Problems in Composite and Active Materials, pp.3-15, 1998. ,
The effect of microcracks on the elastic moduli of brittle materials, Journal of Materials Science Letters, vol.61, issue.12, pp.1457-1460, 1985. ,
DOI : 10.1007/BF00721363
User manual, 1997. ,