S. Popineau and M. E. Shanahan, Simple model to estimate adhesion of structural bonding during humid ageing, International Journal of Adhesion and Adhesives, vol.26, issue.5
DOI : 10.1016/j.ijadhadh.2005.06.002

URL : https://hal.archives-ouvertes.fr/hal-00142201

S. Popineau, C. Rondeau-mouro, C. Sulpice-gaillet, M. E. Shanahan, S. Popineau et al., A 3D EFFECT IN THE WEDGE ADHESION TEST: APPLICATION OF SPECKLE INTERFEROMETRY, The Journal of Adhesion, vol.26, issue.12, pp.1173-1194, 2004.
DOI : 10.1016/j.compositesa.2003.09.007

URL : https://hal.archives-ouvertes.fr/hal-00142198

/. Composite and . Adhésif, Aluminium : Modèle Prédictif de l'Energie d'Adhésion Apparente, pp.23-25, 2004.

S. Popineau and M. E. Shanahan, Essai de Clivage : Effets 3D. Les Actes des XII èmes Journées d'Etude sur l'Adhésion, Communications, vol.orales, pp.29-32, 2003.

/. Composite and . Adhésif, Aluminium : Modèle Prédictif de l'Energie d'Adhésion Apparente. 7 ème Forum FIRTECH Mécanique et Matériaux Ile-de-France, 2004.

/. Composite and . Adhésif, Aluminium : Modèle Prédictif de l'Energie d'Adhésion Apparente. Graines d'Adhésion, pp.23-25, 2004.

S. Popineau and M. E. Shanahan, Essai de Clivage : Effets 3D. XII èmes Journées d'Etude sur l'Adhésion, Ile d, pp.29-32, 2003.

J. P. Sargent, Adherend surface morphology and its influence on the peel strength of adhesive joints bonded with modified phenolic and epoxy structural adhesives, International Journal of Adhesion and Adhesives, vol.14, issue.1, pp.21-30, 1994.
DOI : 10.1016/0143-7496(94)90017-5

D. E. Packham, The Mechanical Theory of Adhesion???Changing Perceptions 1925-1991, The Journal of Adhesion, vol.26, issue.2-3, pp.137-144, 1992.
DOI : 10.1007/978-94-015-7764-9

A. Namkanisorn and M. K. , Chaudhury, in An Arrhenius Method to Study the Effect of Surface Roughness in Polymer- Metal Adhesion, pp.415-417, 1998.

A. J. Kinloch, The science of adhesion, Journal of Materials Science, vol.14, issue.11, pp.2141-2166, 1980.
DOI : 10.1007/BF00552302

S. J. Hitchcock, N. T. Carroll, and M. G. Nicholas, Some effects of substrate roughness on wettability, Journal of Materials Science, vol.66, issue.3, pp.714-732, 1981.
DOI : 10.1007/BF02402789

M. Kalnins, A. Sirmacs, and L. Malers, On the importance of some surface and interface characteristics in the formation of the properties of adhesive joints, International Journal of Adhesion and Adhesives, vol.17, issue.4, pp.365-372, 1997.
DOI : 10.1016/S0143-7496(97)00043-2

A. Pocius and C. Dahlquist, Adhesion and Adhesives, edited by Audio Course ACS. 17 A, Adhesion and Adhesives, pp.40-42, 1987.

N. Kiuna, C. J. Lawrence, Q. P. Fontana, P. D. Lee, T. Selerland et al., A model for resin viscosity during cure in the resin transfer moulding process, Composites Part A: Applied Science and Manufacturing, vol.33, issue.11, pp.1497-1503, 2002.
DOI : 10.1016/S1359-835X(02)00177-X

W. Cheng, P. F. Dunn, and R. M. Brach, Surface roughness effects onmicroparticle adhesion, The Journal of Adhesion, vol.78, issue.11, pp.929-965, 2002.
DOI : 10.1017/CBO9781139171731

D. Maugis, On the contact and adhesion of rough surfaces, Journal of Adhesion Science and Technology, vol.24, issue.2, pp.161-175, 1996.
DOI : 10.1163/156856195X00392

S. S. Voyutski, The Nature of Self-Adhesion (Tack) of Polymers. I, Rubber Chemistry and Technology, vol.30, issue.2, pp.531-543, 1957.
DOI : 10.5254/1.3542702

H. R. Brown, The Adhesion Between Polymers, Annual Review of Materials Science, vol.21, issue.1, pp.463-489, 1991.
DOI : 10.1146/annurev.ms.21.080191.002335

S. Debnath, S. L. Wunder, J. I. Mccool, and G. R. Baran, Silane treatment effects on glass/resin interfacial shear strengths, Dental Materials, vol.19, issue.5, pp.441-448, 2003.
DOI : 10.1016/S0109-5641(02)00089-1

A. N. Gent and S. M. Lai, Interfacial bonding, energy dissipation, and adhesion, Journal of Polymer Science Part B: Polymer Physics, vol.32, issue.8, pp.1543-1555, 1994.
DOI : 10.1002/polb.1994.090320826

H. Brockmann, Chemical Aspects of Adhesion Between Metals and Polymers, The Journal of Adhesion, vol.22, issue.2, pp.71-76, 1987.
DOI : 10.1007/978-1-4613-2749-3_28

L. H. Lee, Molecular Bonding Mechanism for Solid Adhesion, The Journal of Adhesion, vol.8, issue.1-3, pp.187-204, 1992.
DOI : 10.1002/pssa.2211060224

K. W. Allen, Some reflections on contemporary views of theories of adhesion, International Journal of Adhesion and Adhesives, vol.13, issue.2, pp.67-72, 1993.
DOI : 10.1016/0143-7496(93)90015-2

D. H. Kaelble, A relationship between the fracture mechanics and surface energetics failure criteria, Journal of Applied Polymer Science, vol.18, issue.6, pp.1869-1889, 1974.
DOI : 10.1002/app.1974.070180622

R. A. Gledhill and A. J. Kinloch, Environmental Failure of Structural Adhesive Joints, The Journal of Adhesion, vol.36, issue.1, pp.315-348, 1974.
DOI : 10.1080/00218467408075035

A. F. Harris and A. Beevers, The effects of grit-blasting on surface properties for adhesion, International Journal of Adhesion and Adhesives, vol.19, issue.6, pp.445-452, 1999.
DOI : 10.1016/S0143-7496(98)00061-X

J. J. Bikerman, CAUSES OF POOR ADHESION: WEAK BOUNDARY LAYERS, Industrial & Engineering Chemistry, vol.59, issue.9, pp.40-44, 1967.
DOI : 10.1021/ie51403a010

A. N. Gent and R. P. Petrich, Adhesion of Viscoelastic Materials to Rigid Substrates, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.310, issue.1502, pp.433-448, 1969.
DOI : 10.1098/rspa.1969.0085

A. N. Gent and J. Schultz, Effect of Wetting Liquids on the Strength of Adhesion of Viscoelastic Material, The Journal of Adhesion, vol.1, issue.4, pp.281-294, 1972.
DOI : 10.1080/00218467208072199

D. Maugis and M. Barquins, Fracture mechanics and the adherence of viscoelastic bodies, Journal of Physics D: Applied Physics, vol.11, issue.14, pp.1989-2023, 1978.
DOI : 10.1088/0022-3727/11/14/011

A. Carré and J. Schultz, Polymer-Aluminium Adhesion II. Role of the Adhesive and Cohesive Properties of the Polymer, The Journal of Adhesion, vol.59, issue.5, pp.135-156, 1984.
DOI : 10.1002/pol.1975.180131005

G. J. Lake and A. G. Thomas, The Strength of Highly Elastic Materials, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.300, issue.1460, pp.108-119, 1967.
DOI : 10.1098/rspa.1967.0160

M. E. Shanahan and F. Michel, Physical adhesion of rubber to glass: cross-link density effects near equilibrium, International Journal of Adhesion and Adhesives, vol.11, issue.3, pp.170-176, 1991.
DOI : 10.1016/0143-7496(91)90019-E

J. R. Wingfield, Treatment of composite surfaces for adhesive bonding, International Journal of Adhesion and Adhesives, vol.13, issue.3, pp.151-156, 1993.
DOI : 10.1016/0143-7496(93)90036-9

G. K. Kodokian and A. J. Kinloch, Surface pretreatment and adhesion of thermoplastic fibre-composites, Journal of Materials Science Letters, vol.21, issue.6, pp.625-627, 1988.
DOI : 10.1007/BF01730315

M. Shahid and S. A. Hashim, Cleavage Strength of Steel/Composite Joints, The Journal of Adhesion, vol.15, issue.4, pp.365-384, 2000.
DOI : 10.1016/0143-7496(94)90017-5

F. Dorval, A. Denoyelle, and J. , Joud, in Influence d'un Primaire d'Adhésion à Fonction Amine sur le Vieillissement en Milieu Humide d'un Assemblage Colle Epoxy, pp.196-199, 2001.

B. B. Johnsen, K. Olafsen, and A. Stori, Reflection-absorption FT-IR studies of the specific interaction of amines and an epoxy adhesive with GPS treated aluminium surfaces, International Journal of Adhesion and Adhesives, vol.23, issue.2, pp.155-163, 2003.
DOI : 10.1016/S0143-7496(03)00008-3

J. Cognard, The metal/polymer interphase in adhesive joints, International Journal of Adhesion and Adhesives, vol.11, issue.2, pp.114-116, 1991.
DOI : 10.1016/0143-7496(91)90036-H

H. Kollek, Some aspects of chemistry in adhesion on anodized aluminium, International Journal of Adhesion and Adhesives, vol.5, issue.2, pp.75-80, 1985.
DOI : 10.1016/0143-7496(85)90019-3

M. E. Shanahan and C. Bourgès-monnier, Effects of plasma treatment on the adhesion of an epoxy composite, International Journal of Adhesion and Adhesives, vol.16, issue.2, pp.129-135, 1996.
DOI : 10.1016/0143-7496(95)00028-3

X. H. Gu, G. Xue, and B. C. Jiang, Effect of deposition conditions for ??-aminopropyltriethoxy silane on adhesion between copper and epoxy resins, Applied Surface Science, vol.115, issue.1, pp.66-73, 1997.
DOI : 10.1016/S0169-4332(96)00857-4

S. G. Hong and J. Boerio, Adhesive Bonding of Clean and Oil-Contaminated Electrogalvanized Steel Substrates, The Journal of Adhesion, vol.30, issue.1-2, pp.133-149, 1995.
DOI : 10.1002/app.1982.070270112

M. Bremont, W. Brockmann, M. F. Guimon, and G. Pfister-guillouzo, Improvement of the Durability of Zinc-Coated Steel/Epoxy Bonded Joints, The Journal of Adhesion, vol.41, issue.1-4, pp.147-168, 1993.
DOI : 10.1016/0143-7496(86)90017-5

A. Rattana, J. D. Hermes, M. Abel, and J. F. Watts, The interaction of a commercial dry film adhesive with aluminium and organosilane treated aluminium surfaces: a study by XPS and ToF-SIMS, International Journal of Adhesion and Adhesives, vol.22, issue.3, pp.205-218, 2002.
DOI : 10.1016/S0143-7496(01)00056-2

M. Abel, J. F. Watts, and R. P. Digby, The adsorption of alkoxysilanes on oxidised aluminium substrates, International Journal of Adhesion and Adhesives, vol.18, issue.3, pp.179-192, 1998.
DOI : 10.1016/S0143-7496(97)00059-6

C. Bockenheimer, B. Valeske, and W. Possart, Network structure in epoxy aluminium bonds after mechanical treatment, International Journal of Adhesion and Adhesives, vol.22, issue.5, pp.349-356, 2002.
DOI : 10.1016/S0143-7496(02)00014-3

N. Chikhi, S. Fellahi, and M. Bakar, Modification of epoxy resin using reactive liquid (ATBN) rubber, European Polymer Journal, vol.38, issue.2, pp.251-264, 2002.
DOI : 10.1016/S0014-3057(01)00194-X

R. J. Morgan and J. E. , The Durability of Epoxies, Polymer-Plastics Technology and Engineering, vol.10, issue.1, pp.49-116, 1978.
DOI : 10.1007/BF00540886

G. Hagnauer, L. , and D. A. Dunn, Dicyandiamide analysis and solubility in epoxy resins, Journal of Applied Polymer Science, vol.26, issue.6, pp.1837-1846, 1981.
DOI : 10.1002/app.1981.070260609

J. Mijovic, J. G. Williams, and T. Donnellan, Processing???morphology???property relationships in epoxy resins, Journal of Applied Polymer Science, vol.30, issue.6, pp.2351-2366, 1985.
DOI : 10.1002/app.1985.070300608

J. M. Charlesworth, Effect of crosslink density on the molecular relaxations in diepoxide-diamine network polymers. Part 1. The glassy region, Polymer Engineering and Science, vol.2, issue.4, pp.221-229, 1988.
DOI : 10.1002/pen.760280405

E. Urbaczewski-espuche, J. Galy, J. Gérard, J. Pascault, and H. Sautereau, Influence of chain flexibility and crosslink density on mechanical properties of epoxy/amine networks, Polymer Engineering and Science, vol.15, issue.22, pp.1572-1580, 1991.
DOI : 10.1002/pen.760312204

M. Ochi, M. Shimbo, M. Saga, and N. Takashima, Mechanical and dielectric relaxations of epoxide resins containing spiro-ring structure, Journal of Polymer Science Part B: Polymer Physics, vol.24, issue.10, pp.2185-2195, 1986.
DOI : 10.1002/polb.1986.090241003

S. Pangrle, C. S. Wu, and P. H. , Low temperature relaxation of DGEBA epoxy resins: A thermally stimulated discharge current (TSDC) study, Polymer Composites, vol.19, issue.8, pp.173-183, 1989.
DOI : 10.1002/pc.750100305

G. Sanz, J. Garmendia, M. A. Andres, and I. Mondragon, Dependence of dynamic mechanical behavior of DGEBA/DDM stoichiometric epoxy systems on the conditions of curing process, Journal of Applied Polymer Science, vol.55, issue.1, pp.75-87, 1995.
DOI : 10.1002/app.1995.070550108

J. Wang and J. Ploehn, Dynamic mechanical analysis of the effect of water on glass bead-epoxy composites, Journal of Applied Polymer Science, vol.59, issue.2, pp.345-357, 1996.
DOI : 10.1002/(SICI)1097-4628(19960110)59:2<345::AID-APP19>3.0.CO;2-V

M. Ochi, H. Kageyama, and M. Shimbo, Mechanical and dielectric relaxations of poly(hydroxy ethers): 1. Low-temperature relaxations, Polymer, vol.29, issue.2, pp.320-324, 1988.
DOI : 10.1016/0032-3861(88)90340-0

J. D. Keenan, J. C. Seferis, and J. T. Quinlivan, Effects of moisture and stoichiometry on the dynamic mechanical properties of a high-performance structural epoxy, Journal of Applied Polymer Science, vol.24, issue.12, pp.2375-2387, 1979.
DOI : 10.1002/app.1979.070241206

N. D. Danieley, E. R. Long, and . Jr, Effects of curing on the glass transition temperature and moisture absorption of a neat epoxy resin, Journal of Polymer Science: Polymer Chemistry Edition, vol.19, issue.10, pp.2443-2449, 1981.
DOI : 10.1002/pol.1981.170191007

C. A. Byrne, G. Hagnauer, L. , and N. S. Schneider, Effects of variation in composition and temperature on the amine cure of an epoxy resin model system, Polymer Composites, vol.14, issue.4, pp.206-213, 1983.
DOI : 10.1002/pc.750040403

Y. G. Lin, H. Sautereau, and J. Pascault, BDMA-catalyzed DDA-epoxy resin system: Temperature and composition effects on curing mechanism, Journal of Polymer Science Part A: Polymer Chemistry, vol.24, issue.9, pp.2171-2184, 1986.
DOI : 10.1002/pola.1986.080240911

G. Mikolajczak and J. Cavaillé, Dynamic mechanical behaviour and its dependence on preparation method of structural epoxide resin, Polymer, vol.28, issue.12, pp.2023-2031, 1987.
DOI : 10.1016/0032-3861(87)90036-X

M. Ochi, K. Yamashita, M. Yoshizumi, and M. Shimbo, Internal stress in epoxide resin networks containing biphenyl structure, Journal of Applied Polymer Science, vol.38, issue.5, pp.789-799, 1989.
DOI : 10.1002/app.1989.070380502

N. Amdouni, H. Sautereau, J. Gérard, and J. Pascault, Epoxy networks based on dicyandiamide: effect of the cure cycle on viscoelastic and mechanical properties, Polymer, vol.31, issue.7, pp.1245-1253, 1990.
DOI : 10.1016/0032-3861(90)90215-K

C. S. Wu, Effect of stirring on morphology and properties in a catalyst cured epoxy system, Journal of Applied Polymer Science, vol.43, issue.8, pp.1421-1429, 1991.
DOI : 10.1002/app.1991.070430803

T. Shiraishi, H. Motobe, and M. Ochi, Effect of network structure on thermal and mechanical properties of cured epoxide resins, Polymer, vol.33, issue.14, pp.2975-2980, 1992.
DOI : 10.1016/0032-3861(92)90084-A

B. Ellis, M. S. Found, and J. R. Bell, Effects of cure treatment on glass transition temperatures for a BADGE-DDM epoxy resin, Journal of Applied Polymer Science, vol.59, issue.10, pp.1493-1505, 1996.
DOI : 10.1002/(SICI)1097-4628(19960307)59:10<1493::AID-APP1>3.0.CO;2-H

P. A. Connell and G. B. Mckenna, Arrhenius-type temperature dependence of the segmental relaxation below Tg, The Journal of Chemical Physics, vol.110, issue.22, pp.11054-11060, 1999.
DOI : 10.1063/1.479046

A. V. Kurnoskin, Water resistance of metalliferous epoxy chelate polymers, Journal of Applied Polymer Science, vol.45, issue.9, pp.1557-1567, 1992.
DOI : 10.1002/app.1992.070450907

J. Bouchet and A. A. Roche, The Formation of Epoxy/Metal Interphases: Mechanisms and Their Role in Practical Adhesion, The Journal of Adhesion, vol.20, issue.9, pp.799-830, 2002.
DOI : 10.5006/1.3593851

A. A. Roche, J. Bouchet, and S. Bentadjine, Formation of epoxy-diamine/metal interphases, International Journal of Adhesion and Adhesives, vol.22, issue.6, pp.431-441, 2002.
DOI : 10.1016/S0143-7496(02)00021-0

A. J. Kinloch, Interfacial Fracture Mechanical Aspects of Adhesive Bonded Joints???A Review, The Journal of Adhesion, vol.4, issue.3, pp.193-219, 1979.
DOI : 10.1080/00218467308072233

W. Brockmann, Some Analytical and Theoretical Aspects in Adhesion Science, The Journal of Adhesion, vol.40, issue.1-3, pp.173-179, 1992.
DOI : 10.1080/00218467208072210

C. S. Chen, B. J. Bulkin, and E. M. Pearce, New epoxy resins. III. Application of fourier transform IR to degradation and interaction studies of epoxy resins and their copolymers, Journal of Applied Polymer Science, vol.28, issue.3, pp.1077-1091, 1983.
DOI : 10.1002/app.1983.070280314

R. G. Dillingham and F. J. Boerio, Interphase Composition in Aluminum/Epoxy Adhesive Joints, The Journal of Adhesion, vol.75, issue.2-4, pp.315-335, 1987.
DOI : 10.1007/BF00823223

J. T. Young, N. G. Cave, and F. J. Boerio, Determination of the Molecular Structure of Interphases Between Epoxy/4,4???-Diaminodiphenylsulfone Adhesives and Silver Substrates Using SERS and XPS, The Journal of Adhesion, vol.126, issue.1-3, pp.143-160, 1992.
DOI : 10.1021/la00052a024

S. G. Hong, N. G. Cave, and F. J. Boerio, The Modification of Epoxy/Metal Interphases by Adsorbed Contaminants, The Journal of Adhesion, vol.65, issue.4, pp.265-279, 1992.
DOI : 10.1080/00218468708075434

L. Lee, Molecular Bonding and Adhesion at Polymer-Metal Interphases, The Journal of Adhesion, vol.126, issue.1-4, pp.15-38, 1994.
DOI : 10.1163/156856190X00414

L. H. Lee, Molecular Bonding Mechanism for Solid Adhesion, The Journal of Adhesion, vol.8, issue.1-3, pp.187-204, 1992.
DOI : 10.1002/pssa.2211060224

J. Marsh, L. Minel, M. Barthés-labrousse, and D. Gorse, Interaction of epoxy model molecules with aluminium, anodised titanium and copper surfaces: an XPS study, Applied Surface Science, vol.133, issue.4, pp.270-286, 1998.
DOI : 10.1016/S0169-4332(97)00789-7

V. Safavi-ardebili, A. N. Sinclair, and J. K. Spelt, Experimental Investigation of the Interphase in an Epoxy-Aluminum System, The Journal of Adhesion, vol.60, issue.1-4, pp.93-111, 1997.
DOI : 10.1557/PROC-308-217

A. A. Griffith, The Phenomena of Rupture and Flow in Solids, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.221, issue.582-593, pp.163-198, 1920.
DOI : 10.1098/rsta.1921.0006

A. J. Kinloch and S. J. Shaw, The Fracture Resistance of a Toughened Epoxy Adhesive, The Journal of Adhesion, vol.14, issue.4, pp.59-57, 1981.
DOI : 10.1080/00218468108071189

J. K. Jethwa and A. J. Kinloch, The Fatigue and Durability Behaviour of Automotive Adhesives. Part I: Fracture Mechanics Tests, The Journal of Adhesion, vol.647, issue.1-4, pp.71-95, 1997.
DOI : 10.1016/0266-3538(94)90039-6

A. J. Kinloch, C. C. Lau, and J. G. Williams, Modelling the Fracture Behaviour of Adhesive Joints, The Journal of Adhesion, vol.427, issue.1-4, pp.217-224, 1996.
DOI : 10.1007/BF00012635

L. H. Sharpe, Some Thoughts About the Mechanical Response of Composites, The Journal of Adhesion, vol.6, issue.1-2, pp.15-21, 1974.
DOI : 10.1080/00218467208072210

B. Chen and D. A. Dillard, The effect of the T-stress on crack path selection in adhesively bonded joints, International Journal of Adhesion and Adhesives, vol.21, issue.5, pp.357-368, 2001.
DOI : 10.1016/S0143-7496(01)00011-2

S. Xu, D. A. Dillard, and J. G. Dillard, Environmental aging effects on the durability of electrically conductive adhesive joints, International Journal of Adhesion and Adhesives, vol.23, issue.3, pp.235-250, 2003.
DOI : 10.1016/S0143-7496(03)00027-7

B. De-'nève, M. Delamar, T. T. Nguyen, and M. E. Shanahan, Failure mode and ageing of steel/epoxy joints, Applied Surface Science, vol.134, issue.1-4, pp.202-212, 1998.
DOI : 10.1016/S0169-4332(98)00220-7

D. Maugis and M. Barquins, Fracture mechanics and the adherence of viscoelastic bodies, Journal of Physics D: Applied Physics, vol.11, issue.14, pp.1989-2023, 1978.
DOI : 10.1088/0022-3727/11/14/011

A. D. Crocombe and R. D. Adams, An Elasto-Plastic Investigation of the Peel Test, The Journal of Adhesion, vol.2, issue.3-4, pp.241-267, 1982.
DOI : 10.1520/STP26586S

P. G. De-gennes, Toughness of Glassy Polymers: a Tentative Scheme, Europhysics Letters (EPL), vol.15, issue.2, pp.191-196, 1991.
DOI : 10.1209/0295-5075/15/2/014

A. N. Gent and A. J. Kinloch, Adhesion of viscoelastic materials to rigid substrates. III. Energy criterion for failure, Journal of Polymer Science Part A-2: Polymer Physics, vol.9, issue.4, pp.659-668, 1971.
DOI : 10.1002/pol.1971.160090408

J. G. Williams, Root Rotation and Plastic Work Effects in the Peel Test, The Journal of Adhesion, vol.9, issue.1-4, pp.225-239, 1993.
DOI : 10.1163/156856192X00179

K. Kim and N. Aravas, Elastoplastic analysis of the peel test, International Journal of Solids and Structures, vol.24, issue.4, pp.417-435, 1988.
DOI : 10.1016/0020-7683(88)90071-6

N. Aravas, K. Kim, and M. J. Loukis, On the mechanics of adhesion testing of flexible films, Materials Science and Engineering: A, vol.107, pp.159-168, 1989.
DOI : 10.1016/0921-5093(89)90384-5

D. S. Dugdale, Yielding of steel sheets containing slits, Journal of the Mechanics and Physics of Solids, vol.8, issue.2, pp.100-104, 1960.
DOI : 10.1016/0022-5096(60)90013-2

G. I. Barenblatt, Advances in Applied Mechanic, pp.55-129, 1962.

W. Döll, U. Seidelmann, and L. Könczöl, On the validity of the Dugdale model for craze zones at crack tips in PMMA, Journal of Materials Science, vol.8, issue.9, pp.2389-2394, 1980.
DOI : 10.1007/BF00552334

Z. Jin and R. C. Batra, Residual strength of centrally cracked metal/fiber composite laminates, Materials Science and Engineering: A, vol.216, issue.1-2, pp.117-124, 1996.
DOI : 10.1016/0921-5093(96)10396-8

P. G. De-gennes, Reptation of a Polymer Chain in the Presence of Fixed Obstacles, The Journal of Chemical Physics, vol.55, issue.2, pp.572-579, 1971.
DOI : 10.1063/1.1675789

N. A. Fleck and Z. Suo, Crack path selection in a brittle adhesive layer, International Journal of Solids and Structures, vol.27, issue.13, pp.1683-1703, 1991.
DOI : 10.1016/0020-7683(91)90069-R

W. T. Mccarvill and J. P. Bell, Torsional Test Method for Adhesive Joints, The Journal of Adhesion, vol.10, issue.3, pp.185-193, 1974.
DOI : 10.1088/0508-3443/16/1/316

M. Zanni-deffarges and M. E. Shanahan, Evaluation of adhesive shear modulus in a torsional joint: influence of ageing, International Journal of Adhesion and Adhesives, vol.13, issue.1, pp.41-45, 1993.
DOI : 10.1016/0143-7496(93)90007-V

F. Kadioglu, R. D. Adams, and F. J. Guild, The Shear Stress???Strain Behaviour of Low-modulus Structural Adhesives, The Journal of Adhesion, vol.73, issue.2-3, pp.117-133, 2000.
DOI : 10.1243/03093247V131001

S. Mostovoy and E. J. Ripling, Fracture toughness of an epoxy system, Journal of Applied Polymer Science, vol.10, issue.9, pp.1351-1371, 1966.
DOI : 10.1002/app.1966.070100913

J. W. Grant and J. N. Cooper, Cone-and-Plate Shear Stress Adhesive Test, The Journal of Adhesion, vol.21, issue.2, pp.155-167, 1987.
DOI : 10.1122/1.549898

S. Mostovoy and E. J. Ripling, Influence of water on stress corrosion cracking of epoxy bonds, Journal of Applied Polymer Science, vol.13, issue.6, pp.1083-1111, 1969.
DOI : 10.1002/app.1969.070130602

M. F. Kanninen, A dynamic analysis of unstable crack propagation and arrest in the DCB test specimen, International Journal of Fracture, vol.4, issue.3, pp.415-430, 1974.
DOI : 10.1007/BF00035502

J. M. Whitney, Stress analysis of the double cantilever beam specimen, Composites Science and Technology, vol.23, issue.3, pp.201-219, 1985.
DOI : 10.1016/0266-3538(85)90018-1

B. Blackman, J. P. Dear, A. J. Kinloch, and S. Osiyemi, The calculation of adhesive fracture energies from double-cantilever beam test specimens, Journal of Materials Science Letters, vol.29, issue.5, pp.253-256, 1991.
DOI : 10.1007/BF00735649

M. Meiller, A. A. Roche, and H. Sautereau, Tapered double cantilever beam test used as a practical adhesion test for metal/adhesive/metal systems, Journal of Adhesion Science and Technology, vol.28, issue.7, pp.773-788, 1999.
DOI : 10.1163/156856199X01009

J. Sener, T. Ferracin, L. Caussin, and F. Delannay, On the precision of the wedge-opened double cantilever beam method for measuring the debonding toughness of adhesively bonded plates, International Journal of Adhesion and Adhesives, vol.22, issue.2, pp.129-137, 2002.
DOI : 10.1016/S0143-7496(01)00046-X

K. W. Allen, T. Hatzinikolaou, and K. B. Armstrong, A comparison of acrylic adhesives for bonding aluminum alloys after using various surface preparation methods, International Journal of Adhesion and Adhesives, vol.4, issue.3, pp.133-139, 1984.
DOI : 10.1016/0143-7496(84)90015-0

B. B. Johnsen, K. Olafsen, A. Stori, and K. Vinje, Silanisation of adhesively bonded aluminium alloy AA6060 with ??-glycidoxypropyltrimethoxysilane. I. Durability investigation, Journal of Adhesion Science and Technology, vol.43, issue.14, pp.1931-1948, 2002.
DOI : 10.1163/15685610260427692

C. Creton, E. J. Kramer, C. Hui, and H. R. Brown, Failure mechanisms of polymer interfaces reinforced with block copolymers, Macromolecules, vol.25, issue.12, pp.3075-3088, 1992.
DOI : 10.1021/ma00038a010

E. Boucher, J. P. Folkers, H. Hervet, and L. Léger, Effects of the Formation of Copolymer on the Interfacial Adhesion between Semicrystalline Polymers, Macromolecules, vol.29, issue.2, pp.774-782, 1996.
DOI : 10.1021/ma9509422

F. E. Penado, A Closed Form Solution for the Energy Release Rate of the Double Cantilever Beam Specimen with an Adhesive Layer, Journal of Composite Materials, vol.27, issue.4, pp.383-407, 1993.
DOI : 10.1177/002199839302700403

D. H. Kaelble, Transaction of the Socity of Rheology IV, pp.45-73, 1960.

B. D. Davidson and R. A. Shapery, Effect of Finite Width on Deflection and Energy Release Rate of an Orthotropic Double Cantilever Specimen, Journal of Composite Materials, vol.13, issue.1, pp.640-656, 1988.
DOI : 10.1177/002199838802200704

G. Davy, S. Hashemi, and A. J. Kinloch, The fracture of a rubber-modified epoxy polymer containing through-thickness and surface cracks, International Journal of Adhesion and Adhesives, vol.9, issue.2, pp.69-76, 1989.
DOI : 10.1016/0143-7496(89)90027-4

K. M. Liechti and Y. Chai, Biaxial Loading Experiments for Determining Interfacial Fracture Toughness, Journal of Applied Mechanics, vol.58, issue.3, pp.680-687, 1991.
DOI : 10.1115/1.2897248

M. G. Bader, I. Hamerton, J. N. Hay, M. Kemp, and S. Winchester, Double cantilever beam testing of repaired carbon fibre composites, Composites Part A: Applied Science and Manufacturing, vol.31, issue.6, pp.603-608, 2000.
DOI : 10.1016/S1359-835X(99)00095-0

M. Imanaka, Y. Takeuchi, Y. Nakamura, A. Nishimura, and T. Iida, Fracture toughness of spherical silica-filled epoxy adhesives, International Journal of Adhesion and Adhesives, vol.21, issue.5, pp.389-396, 2001.
DOI : 10.1016/S0143-7496(01)00016-1

B. Chen, D. A. Dillard, J. G. Dillard, J. Clark, and R. L. , Crack Path Selection in Adhesively-Bonded Joints: The Role of Material Properties, The Journal of Adhesion, vol.107, issue.4, pp.405-434, 2001.
DOI : 10.1016/S0020-7683(96)00055-8

A. Al-khanbashi, C. Petiau, A. E. Hamdy, and A. Moet, Fracture mechanics approach to forecast delamination lifetime, Journal of Adhesion Science and Technology, vol.30, issue.8, pp.1093-1107, 2003.
DOI : 10.1163/156856100742339

S. Zhang, R. Panat, and K. J. Hsia, Influence of surface morphology on the adhesion strength of epoxy???aluminum interfaces, Journal of Adhesion Science and Technology, vol.83, issue.12, pp.1685-1711, 2003.
DOI : 10.1163/156856199X00415

J. Qi and D. A. Dillard, Experiments on contact of a loop with a substrate to measure work of adhesion, The Journal of Adhesion, vol.54, issue.6, pp.559-579, 2003.
DOI : 10.1080/14786441008564646

B. D. Davidson, An Analytical Investigation of Delamination Front Curvature in Double Cantilever Beam Specimens, Journal of Composite Materials, vol.24, issue.11, pp.1124-1137, 1990.
DOI : 10.1177/002199839002401101

C. T. Sun and S. Zheng, Delamination characteristics of double-cantilever beam and end-notched flexure composite specimens, Composites Science and Technology, vol.56, issue.4, pp.451-459, 1996.
DOI : 10.1016/0266-3538(96)00001-2

S. R. Swanson, Anticlastic effects and the transition from narrow to wide behavior in orthotropic beams, Composite Structures, vol.53, issue.4, pp.449-455, 2001.
DOI : 10.1016/S0263-8223(01)00055-1

J. H. Crews, K. N. Shivakumar, and I. S. Raju, Strain energy release rate distributions for double cantilever beam specimens, AIAA Journal, vol.29, issue.10, pp.1686-1691, 1991.
DOI : 10.2514/3.10791

R. W. Bryant and W. A. Dukes, The measurement of the shear strength of adhesive joints in torsion, British Journal of Applied Physics, vol.16, issue.1, pp.101-108, 1965.
DOI : 10.1088/0508-3443/16/1/316

R. D. Adams, J. Coppendale, and N. A. Peppiatt, Stress analysis of axisymmetric butt joints loaded in torsion and tension, The Journal of Strain Analysis for Engineering Design, vol.13, issue.1, pp.1-10, 1978.
DOI : 10.1243/03093247V131001

K. P. Pang and J. K. Gillham, Competition between cure and thermal degradation in a high Tg epoxy system: Effect of time and temperature of isothermal cure on the glass transition temperature, Journal of Applied Polymer Science, vol.39, issue.4, pp.909-933, 1990.
DOI : 10.1002/app.1990.070390411

J. Song and W. J. Van-ooij, Bonding and corrosion protection mechanisms of ??-APS and BTSE silane films on aluminum substrates, Journal of Adhesion Science and Technology, vol.25, issue.5, pp.2191-2221, 2003.
DOI : 10.1163/156856197X01001

H. Ohno, K. Endo, Y. Araki, and S. Asakura, Destruction of metal-resin adhesion due to water penetrating through the resin, Journal of Materials Science, vol.19, issue.19, pp.5149-5153, 1992.
DOI : 10.1007/BF02403808

S. Gan, J. K. Gillham, and R. B. Prime, A methodology for characterizing reactive coatings: Time???temperature???transformation (TTT) analysis of the competition between cure, evaporation, and thermal degradation for an epoxy-phenolic system, Journal of Applied Polymer Science, vol.37, issue.3, pp.803-816, 1989.
DOI : 10.1002/app.1989.070370316

G. Z. Xiao and M. E. Shanahan, Swelling of DGEBA/DDA epoxy resin during hygrothermal ageing, Polymer, vol.39, issue.14, pp.3253-3260, 1998.
DOI : 10.1016/S0032-3861(97)10060-X

E. H. Andrews and A. Stevenson, Adhesive Failure of Epoxy-Titanium Bonds in Aqueous Environments, The Journal of Adhesion, vol.6, issue.1, pp.17-40, 1980.
DOI : 10.1080/00218468008078902

S. B. Joshi, T. F. Gray, W. M. Banks, D. Hayward, R. Gilmore et al., Environmental Ageing of Adhesively-Bonded Joints. II. Mechanical Studies, The Journal of Adhesion, vol.64, issue.1-4, pp.317-335, 1997.
DOI : 10.1080/00218467608075063

D. R. Arnott and M. R. Kindermann, Constant Displacement Rate Method for Testing Epoxy Adhesive Bonds, The Journal of Adhesion, vol.2, issue.3, pp.85-100, 1995.
DOI : 10.1098/rspa.1967.0152

S. Bistac, M. F. Vallat, and J. Schultz, Durability of steel/polymer adhesion in an aqueous environment, International Journal of Adhesion and Adhesives, vol.18, issue.5, pp.365-369, 1998.
DOI : 10.1016/S0143-7496(98)00020-7

V. Bellenger, J. Verdu, and E. Morel, Structure-properties relationships for densely cross-linked epoxide-amine systems based on epoxide or amine mixtures, Journal of Materials Science, vol.72, issue.1, pp.63-68, 1989.
DOI : 10.1007/BF00660933

P. Bonniau and A. R. Bunsell, A Comparative Study of Water Absorption Theories Applied to Glass Epoxy Composites, Journal of Composite Materials, vol.25, issue.3, pp.272-293, 1981.
DOI : 10.1177/002199838101500306

M. J. Adamson, Thermal expansion and swelling of cured epoxy resin used in graphite/epoxy composite materials, Journal of Materials Science, vol.98, issue.2, pp.1736-1745, 1980.
DOI : 10.1007/BF00550593

P. Johncock and G. F. Tudgey, Some Effects of Structure, Composition and Cure on the Water Absorption and Glass Transition Temperature of Amine-cured Epoxies, British Polymer Journal, vol.26, issue.5, pp.292-302, 1986.
DOI : 10.1002/pi.4980180504

D. M. Brewis, J. Comyn, and J. L. Tegg, The uptake of water vapour by an epoxide adhesive formed from the diglycidyl ether of bisphenol-A and di-(1-aminopropyl-3-ethoxy) ether, Polymer, vol.21, issue.2, pp.134-138, 1980.
DOI : 10.1016/0032-3861(80)90050-6

A. Apicella and L. Nicolais, Advances in Polymer Science, pp.69-77, 1985.

R. C. Tai and Z. Szklarska-smialowska, Effect of fillers on the degradation of automotive epoxy adhesives in aqueous solutions, Journal of Materials Science, vol.24, issue.1, pp.6199-6204, 1993.
DOI : 10.1007/BF00365044

L. W. Jelinski, J. J. Dumais, A. L. Cholli, T. S. Ellis, and F. E. Karasz, Nature of the water-epoxy interaction, Macromolecules, vol.18, issue.6, pp.1091-1095, 1985.
DOI : 10.1021/ma00148a008

J. Mijovic, N. Miura, and S. Soni, Stage, The Journal of Adhesion, vol.2, issue.2, pp.123-150, 2001.
DOI : 10.1021/jp972444w

J. L. Illinger and N. S. Schneider, Water vapor transport in an epoxy resin based on TGMDA and DICY, Polymer Engineering and Science, vol.18, issue.4, pp.310-314, 1978.
DOI : 10.1002/pen.760200416

M. L. Kaplan, Solvent penetration in cured epoxy networks, Polymer Engineering and Science, vol.23, issue.10, pp.689-698, 1991.
DOI : 10.1002/pen.760311002

L. Banks and B. Ellis, The glass transition temperature of an epoxy resin and the effect of absorbed water, Polymer Bulletin, vol.6, issue.1, pp.377-382, 1979.
DOI : 10.1007/BF00284406

R. T. Fuller, S. Sherrow, R. E. Fornes, and J. D. Memory, Hydrogen exchange between water and epoxy resin, Journal of Applied Polymer Science, vol.24, issue.5, pp.1383-1385, 1979.
DOI : 10.1002/app.1979.070240521

K. C. Cole, D. Noel, J. Hechler, A. Chouliotis, and K. C. Overbury, Room temperature aging of Narmco 5208 carbon-epoxy prepreg. Part I: Physicochemical characterization, Polymer Composites, vol.8, issue.2, pp.150-161, 1989.
DOI : 10.1002/pc.750100303

R. T. Fuller, R. E. Fornes, and J. D. Memory, NMR study of water absorbed by epoxy resin, Journal of Applied Polymer Science, vol.23, issue.6, pp.1871-1874, 1979.
DOI : 10.1002/app.1979.070230627

S. Luo, J. Leisen, and C. P. Wong, Study on mobility of water and polymer chain in epoxy and its influence on adhesion, Journal of Applied Polymer Science, vol.172, issue.174, pp.1-8, 2001.
DOI : 10.1002/app.10473

M. K. Antoon, J. L. Koenig, and T. Serafini, Fourier-transform infrared study of the reversible interaction of water and a crosslinked epoxy matrix, Journal of Polymer Science: Polymer Physics Edition, vol.19, issue.10, pp.1567-1575, 1981.
DOI : 10.1002/pol.1981.180191007

C. Carfagna and A. Apicella, Physical degradation by water clustering in epoxy resins, Journal of Applied Polymer Science, vol.28, issue.9, pp.2881-2885, 1983.
DOI : 10.1002/app.1983.070280917

C. L. Soles and A. F. Yee, A discussion of the molecular mechanisms of moisture transport in epoxy resins, Journal of Polymer Science Part B: Polymer Physics, vol.172, issue.174, pp.792-802, 2000.
DOI : 10.1002/(SICI)1099-0488(20000301)38:5<792::AID-POLB16>3.0.CO;2-H

R. J. Sadt, D. L. Van, and . Hart, Solid-State Proton Nuclear Magnetic Resonance of a Glassy Epoxy Exposed to Water, Macromolecules, vol.28, issue.9, pp.3416-3424, 1995.
DOI : 10.1021/ma00113a048

J. Klotz, W. Brostow, M. Hess, and W. S. Veeman, Epoxy and glass composites in water studied with2H-NMR, Polymer Engineering & Science, vol.176, issue.8, pp.1129-1133, 1996.
DOI : 10.1002/pen.10506

C. Carfagna, A. Apicella, and L. Nicolais, The effect of the prepolymer composition of amino-hardened epoxy resins on the water sorption behavior and plasticization, Journal of Applied Polymer Science, vol.27, issue.1, pp.105-112, 1982.
DOI : 10.1002/app.1982.070270112

P. Peyser and W. D. Bascom, The anomalous lowering of the glass transition of an epoxy resin by plasticization with water, Journal of Materials Science, vol.11, issue.1, pp.75-83, 1981.
DOI : 10.1007/BF00552061

C. Maggana and P. Pissis, TSDC studies of the effects of plasticizer and water on the sub-Tg relaxations of an epoxy resin system, Journal of Macromolecular Science, Part B, vol.36, issue.6, pp.749-772, 1997.
DOI : 10.1080/00222349708212400

R. J. Morgan, J. E. Neal, and D. L. Fanter, The effect of moisture on the physical and mechanical integrity of epoxies, Journal of Materials Science, vol.18, issue.3, pp.751-764, 1980.
DOI : 10.1007/BF00551743

B. C. Ennis, P. J. Pearce, and C. E. Morris, Aging and performance of structural film adhesives. III. Effect of humidity on a modern aerospace adhesive, Journal of Applied Polymer Science, vol.37, issue.1, pp.15-32, 1989.
DOI : 10.1002/app.1989.070370102

B. De-'neve and M. E. Shanahan, Effects of humidity on an epoxy adhesive, International Journal of Adhesion and Adhesives, vol.12, issue.3, pp.191-196, 1992.
DOI : 10.1016/0143-7496(92)90053-X

G. Sharon, H. Dodiuk, and S. Kenig, Hygrothermal Properties of Epoxy Film Adhesives, The Journal of Adhesion, vol.15, issue.1-4, pp.87-104, 1989.
DOI : 10.1016/0143-7496(86)90011-4

D. H. Kaelble and P. J. Dynes, Hydrothermal Aging of Composite Materials Part 2: Matrix Aspects, The Journal of Adhesion, vol.47, issue.2, pp.195-212, 1977.
DOI : 10.1080/00218467608075083

C. Carfagna, P. Mastronardi, and L. Nicolais, Hygrothermal ageing of epoxy based coatings, Journal of Materials Science, vol.21, issue.8, pp.2239-2244, 1982.
DOI : 10.1007/BF00543733

P. Nogueira, C. Ramirez, A. Torres, M. J. Abad, J. Cano et al., Effect of water sorption on the structure and mechanical properties of an epoxy resin system, Journal of Applied Polymer Science, vol.261, issue.1, pp.71-80, 2001.
DOI : 10.1002/1097-4628(20010404)80:1<71::AID-APP1077>3.0.CO;2-H

D. Colombini, J. J. Martinez-vega, and G. Merle, Dynamic mechanical investigations of the effects of water sorption and physical ageing on an epoxy resin system, Polymer, vol.43, issue.16, pp.4479-4485, 2002.
DOI : 10.1016/S0032-3861(02)00272-0

C. Grave, I. Mcewan, and R. A. Pethrick, Influence of stoichiometric ratio on water absorption in epoxy resins, Journal of Applied Polymer Science, vol.69, issue.12, pp.2369-2376, 1998.
DOI : 10.1002/(SICI)1097-4628(19980919)69:12<2369::AID-APP8>3.0.CO;2-6

D. M. Brewis, J. Comyn, R. J. Shalash, and J. L. Tegg, Interaction of water with some epoxide adhesives, Polymer, vol.21, issue.3, pp.357-360, 1980.
DOI : 10.1016/0032-3861(80)90282-7

H. G. Carter and K. G. Kibler, Entropy Model for Glass Transition in Wet Resins and Composites, Journal of Composite Materials, vol.11, issue.3, pp.265-275, 1977.
DOI : 10.1177/002199837701100302

A. Chateauminois, B. Chabert, J. P. Soulier, and L. Vincent, Dynamic mechanical analysis of epoxy composites plasticized by water: Artifact and reality, Polymer Composites, vol.34, issue.4, pp.288-296, 1995.
DOI : 10.1002/pc.750160405

J. Zhou and J. P. Lucas, Hygrothermal effects of epoxy resin. Part II: variations of glass transition temperature, Polymer, vol.40, issue.20, pp.5513-5522, 1999.
DOI : 10.1016/S0032-3861(98)00791-5

J. Zhou and J. P. Lucas, Hygrothermal effects of epoxy resin. Part I: the nature of water in epoxy, Polymer, vol.40, issue.20, pp.5505-5512, 1999.
DOI : 10.1016/S0032-3861(98)00790-3

L. El-sa-'ad, M. I. Darby, and B. Yates, Moisture absorption characteristics of rubber particulate filled epoxy adhesives, Journal of Materials Science, vol.22, issue.5, pp.1653-1659, 1989.
DOI : 10.1007/BF01105687

L. El-sa-'ad, M. I. Darby, and B. Yates, Moisture absorption by epoxy resins: The reverse thermal effect, Journal of Materials Science, vol.20, issue.8, pp.3577-3582, 1990.
DOI : 10.1007/BF00575392

S. K. Karad, F. R. Jones, and D. Attwood, Moisture absorption by cyanate ester modified epoxy resin matrices. Part II. The reverse thermal effect, Polymer, vol.43, issue.21, pp.5643-5649, 2002.
DOI : 10.1016/S0032-3861(02)00484-6

S. Gazit, Dimensional changes in glass-filled epoxy resin as a result of absorption of atmospheric moisture, Journal of Applied Polymer Science, vol.22, issue.12, pp.3547-3558, 1978.
DOI : 10.1002/app.1978.070221219

G. Z. Xiao and M. E. Shanahan, Irreversible effects of hygrothermal aging on DGEBA/DDA epoxy resin, Journal of Applied Polymer Science, vol.69, issue.2, pp.363-369, 1997.
DOI : 10.1002/(SICI)1097-4628(19980711)69:2<363::AID-APP18>3.0.CO;2-X

P. J. Pearce, R. G. Davidson, and C. E. Morris, Aging and performance of structural film adhesives. I. A comparison of two high-temperature curing, epoxy-based systems, Journal of Applied Polymer Science, vol.27, issue.11, pp.4501-4516, 1982.
DOI : 10.1002/app.1982.070271137

W. J. Mikols, J. C. Seferis, A. Apicella, and L. Nicolais, Evaluation of structural changes in epoxy systems by moisture sorption-desorption and dynamic mechanical studies, Polymer Composites, vol.21, issue.3, pp.118-124, 1982.
DOI : 10.1002/pc.750030304

B. De-'neve and M. E. Shanahan, Physical and Chemical Effects in An Epoxy Resin Exposed to Water Vapour, The Journal of Adhesion, vol.49, issue.3-4, pp.165-176, 1995.
DOI : 10.1002/app.1989.070370102

F. R. Jones, M. A. Shah, M. G. Bader, and L. Boniface, in The Analysis of Residual Dicyandiamide (DICY) and Its Effects on the Performance of GRP in Water and Humid Environments, pp.4-443, 1987.

L. Bao and A. F. Yee, Moisture absorption and hygrothermal aging in a bismaleimide resin, Polymer, vol.42, issue.17, pp.7327-7333, 2001.
DOI : 10.1016/S0032-3861(01)00238-5

K. I. Ivanova, R. A. Pethrick, and S. Affrossman, Hygrothermal aging of rubber-modified and mineral-filled dicyandiamide-cured DGEBA epoxy resin. II. Dynamic mechanical thermal analysis, Journal of Applied Polymer Science, vol.260, issue.14, pp.3477-3485, 2001.
DOI : 10.1002/app.2209

M. P. Zanni-deffarges and M. E. Shanahan, Bulk and Interphase Effects in Aged Structural Joints, The Journal of Adhesion, vol.11, issue.1-4, pp.245-257, 1994.
DOI : 10.1080/00218468108071199

A. Apicella, L. Nicolais, G. Astarita, and E. Drioli, Hygrothermal history dependence of moisture sorption kinetics in epoxy resins, Polymer Engineering and Science, vol.34, issue.1, pp.18-22, 1981.
DOI : 10.1002/pen.760210104

J. Crank, Mathematics of Diffusion, 1956.

C. Shen and G. S. Springer, Moisture Absorption and Desorption of Composite Materials, Journal of Composite Materials, vol.10, issue.1, pp.2-20, 1976.
DOI : 10.1177/002199837601000101

J. Crank, The Mathematics of Diffusion, 1975.

H. G. Carter and K. G. Kibler, Langmuir-Type Model for Anomalous Moisture Diffusion In Composite Resins, Journal of Composite Materials, vol.10, issue.2, pp.118-131, 1978.
DOI : 10.1177/002199837801200201

K. I. Ivanova, R. A. Pethrick, and S. Affrossman, Investigation of hydrothermal ageing of a filled rubber toughened epoxy resin using dynamic mechanical thermal analysis and dielectric spectroscopy, Polymer, vol.41, issue.18, pp.6787-6796, 2000.
DOI : 10.1016/S0032-3861(00)00042-2

J. R. Ritter, J. R. Fox, D. I. Hutko, and T. J. Lardner, Moisture-assisted crack growth at epoxy???glass interfaces, Journal of Materials Science, vol.33, issue.18, pp.4581-4588, 1998.
DOI : 10.1023/A:1004477006957

A. Raveh, D. Marouani, R. Ydgar, J. E. Klemberg-sapieha, and A. Bettelheim, Aging Effects of Epoxy Resin on Joining of Aluminum Plates, The Journal of Adhesion, vol.2, issue.2-3, pp.109-124, 1991.
DOI : 10.1021/bk-1986-0322.ch016

A. J. Kinloch, M. S. Littke, and J. F. Watts, The role of the interphase in the environmental failure of adhesive joints, Acta Materialia, vol.48, issue.18-19, pp.4543-4553, 2000.
DOI : 10.1016/S1359-6454(00)00240-8

B. M. Parker, Adhesive bonding of fibre-reinforced composites, International Journal of Adhesion and Adhesives, vol.14, issue.2, pp.137-143, 1994.
DOI : 10.1016/0143-7496(94)90009-4

M. R. Bowditch, The durability of adhesive joints in the presence of water, International Journal of Adhesion and Adhesives, vol.16, issue.2, pp.73-79, 1996.
DOI : 10.1016/0143-7496(96)00001-2

J. F. Watts, R. A. Blunden, and T. J. Hall, The failure mode of adhesively bonded aluminium following aqueous exposure, Surface and Interface Analysis, vol.4, issue.1-12, pp.227-235, 1990.
DOI : 10.1002/sia.740160150

K. Vine, P. Cawley, and A. J. Kinloch, The Correlation of Non-Destructive Measurements and Toughness Changes in Adhesive Joints during Environmental Attack, The Journal of Adhesion, vol.11, issue.2, pp.125-161, 2001.
DOI : 10.1080/00218469908009557

R. A. Gledhill, A. J. Kinloch, and S. J. Shaw, A Model for Predicting Joint Durability, The Journal of Adhesion, vol.6, issue.3, pp.3-15, 1980.
DOI : 10.1080/00218468008078901

D. M. Brewis, J. Comyn, B. C. Cope, and A. C. Moloney, Effect of carriers on the performance of aluminum alloy joints bonded with a structural film adhesive, Polymer Engineering and Science, vol.10, issue.12, pp.797-803, 1981.
DOI : 10.1002/pen.760211210

W. K. Loh, A. D. Crocombe, M. M. Wahab, and I. A. Ashcroft, Environmental degradation of the interfacial fracture energy in an adhesively bonded joint, Engineering Fracture Mechanics, vol.69, issue.18, pp.2113-2128, 2002.
DOI : 10.1016/S0013-7944(02)00004-8

R. A. Pethrick, P. Boinard, and W. M. Banks, Use of dielectric spectroscopy to assess adhesively bonded composite structures, Part II: Dielectric study, The Journal of Adhesion, vol.35, issue.3, pp.1015-1026, 2002.
DOI : 10.1002/pol.1967.150050711

O. Lunder, F. Lapique, B. Johnsen, and K. Nisancioglu, Effect of pre-treatment on the durability of epoxy-bonded AA6060 aluminium joints, International Journal of Adhesion and Adhesives, vol.24, issue.2, pp.107-117, 2004.
DOI : 10.1016/j.ijadhadh.2003.07.002

M. P. Zanni-deffarges and M. E. Shanahan, Diffusion of water into an epoxy adhesive: comparison between bulk behaviour and adhesive joints, International Journal of Adhesion and Adhesives, vol.15, issue.3, pp.137-142, 1995.
DOI : 10.1016/0143-7496(95)91624-F

T. Horton, G. M. Spinks, and N. A. Isles, Structural adhesive performance in marine environments, Polymer International, vol.1, issue.1, pp.9-17, 1992.
DOI : 10.1002/pi.4990280104

W. Brockmann, O. Hennemann, H. Kolek, and C. Matz, Adhesion in bonded aluminium joints for aircraft construction, International Journal of Adhesion and Adhesives, vol.6, issue.3, pp.115-143, 1986.
DOI : 10.1016/0143-7496(86)90016-3

J. W. Wylde and J. K. Spelt, Measurement of adhesive joint fracture properties as a function of environmental degradation, International Journal of Adhesion and Adhesives, vol.18, issue.4, pp.237-246, 1998.
DOI : 10.1016/S0143-7496(98)00028-1

I. Linossier, F. Gaillard, M. Romand, and T. Nguyen, A Spectroscopic Technique for Studies of Water Transport Along the Interface and Hydrolytic Stability of Polymer/Substrate Systems, The Journal of Adhesion, vol.272, issue.3-4, pp.221-239, 1999.
DOI : 10.1557/PROC-385-57

R. P. Digby, N. Porritt, and S. J. Shaw, in The Effect of Solution and Drying Conditions on the Performance of Organosilane Pretreated Aluminium Joints, pp.67-72, 1999.

D. G. Dixon, Step Organosilane Treatments for Adhesive Bonding of Aluminium, pp.329-334, 1999.

K. L. Wolfe, J. G. Dillard, S. R. Harp, and J. W. Grant, Plasma-Sprayed Aluminum and Titanium Adherends: II. Durability Studies for Wedge Specimens Bonded with Polyimide Adhesive, The Journal of Adhesion, vol.20, issue.1-4, pp.141-152, 1997.
DOI : 10.1080/00218468608073236

M. E. Shanahan, The role of the liquid in environmental stress cracking of polyethylene, Journal of Materials Science Letters, vol.50, issue.1, pp.28-32, 1983.
DOI : 10.1007/BF00719949

C. Bockenheimer, D. Fata, and W. Possart, New aspects of aging in epoxy networks. II. Hydrothermal aging, Journal of Applied Polymer Science, vol.34, issue.1, pp.369-377, 2004.
DOI : 10.1002/app.13093

R. N. Wenzel, Surface Roughness and Contact Angle., The Journal of Physical and Colloid Chemistry, vol.53, issue.9, pp.1466-1467, 1949.
DOI : 10.1021/j150474a015