E. Felder, Modèle de la vague, application à la modélisation de l'usure par abrasion, Cours de tribologie de la mise en forme

P. Becher, W. R. Wilson, and J. A. Et-walowit, An isothermal hydrodynamic lubrication theory for strip rolling with front and back tensions, Tribology Convention, pp.169-172, 1965.

P. Vergne, M. Kamel, and M. Querry, Behavior of Cold-Rolling Oil-in-Water Emulsions: A Rheological Approach, Journal of Tribology, vol.119, issue.2, pp.250-258, 1997.
DOI : 10.1115/1.2833173

P. Vergne and B. Fournel, Comportement rhéologique des lubrifiants et lubrification : approches expérimentales, Mémoire pour obtenir l'habilitation à diriger des recherches, Institut national des sciences appliquées de Lyon Etude et interprétation de l'évolution des conditions d'emprise en laminage double-réduction en fonction de la réduction, la vitesse, et la lubrification, 1997.

N. Marsault, Modélisation du régime de lubrification mixte en laminage à froid, p.28, 1998.

A. Z. Szeri, On the flow of emulsions in tribological contacts, Wear, vol.200, issue.1-2, pp.353-364, 1996.
DOI : 10.1016/S0043-1648(96)07251-1

W. R. Wilson, Y. Sakaguchi, S. , and S. R. , A Mixed Flow Model for Lubrication with Emulsions, Tribology Transactions, vol.110, issue.3, pp.543-551, 1994.
DOI : 10.1080/10402009408983327

O. Reynolds, On the Theory of Lubrication and Its Application to Mr. Beauchamp Tower's Experiments, Including an Experimental Determination of the Viscosity of Olive Oil, Philosophical Transactions of the Royal Society of London, vol.177, issue.0, pp.157-234, 1886.
DOI : 10.1098/rstl.1886.0005

T. G. Hugues, C. D. Elcoate, and H. P. Evans, A novel method for integrating firstand-second-order differential equations in elastohydrodynamic lubrication for the solution of smooth isothermal, line contact problems, International journal for numerical methods in engineering, vol.44, pp.1099-1113, 1999.

J. Molimard, M. Querry, and P. Vergne, Rhéologie du lubrifiant en conditions réelles : mesures et confrontation à un contact bille/disque, La revue de métallurgie ? CIT / science et génie des matériaux, pp.141-148, 2001.

P. Vergne, C. Wai, and C. , Propriétés et comportement rhéologiques des lubrifiants fluides pour machines tournantes, EDF-DER, Service IPN, Département PROVAL, vol.116, 1997.

S. Jahanmir and M. Beltzer, An absorption model for friction in boundary lubrication, ASLE trans, vol.293, pp.423-430, 1986.

F. Delamare, Lubrification limite et transfert, Cours de tribologie de la mise en forme

D. Dowson and G. R. Higginson, Elastohydrodynamic Lubrication -Fundamentals of roller and gear lubrication, 1966.

B. J. Hamrock and D. Dowson, Isothermal elasto-hydrodynamic lubrication of point contacts. I -Theoretical formulation 223-229 III -Fully flooded results, J. Lubr. Technol. (Trans ASME) J. Lubr. Technol. (Trans ASME), vol.98, pp.99-264, 1976.

H. A. Spikes, Wear and fatigue problems in connection with water-based hydraulic fluids, Journal of Synthetic Lubrication, vol.179, issue.2, pp.115-135, 1987.
DOI : 10.1002/jsl.3000040203

P. Montmitonnet and E. Felder, Régimes de lubrification et lubrification hydrodynamique visqueuse, Cours de tribologie de la mise en forme

S. Sheu and W. R. Wilson, Mixed Lubrication of Strip Rolling, Tribology Transactions, vol.21, issue.1, pp.483-493, 1994.
DOI : 10.1080/10402009408983321

D. Zhu, G. Biresaw, S. J. Clark, and T. Kasun, Elastohydrodynamic Lubrication With O/W Emulsions, Journal of Tribology, vol.116, issue.2, pp.310-320, 1994.
DOI : 10.1115/1.2927216

R. Reich, N. Panseri, and J. Bohaychick, The effects of lubricant starvation in the cold rolling of aluminium metal when using an oil-in-water emulsion, Journal of the society of tribologists and lubrication engineers, 2000.

T. Nakahara, T. Makino, and K. Kyogoku, Observations of Liquid Droplet Behavior and Oil Film Formation in O/W Type Emulsion Lubrication, Journal of Tribology, vol.110, issue.2, pp.348-353, 1988.
DOI : 10.1115/1.3261630

A. Kumar, S. R. Schmid, and W. R. Wilson, Particle behavior in two-phased lubrication, Wear, vol.206, issue.1-2, pp.130-135, 1997.
DOI : 10.1016/S0043-1648(96)07340-1

M. N. Gay, Contribution à l'étude de la tribologie du laminage, formulation rationnelle d'une émulsion et maîtrise du frottement en laminage à froid des aciers au carbone, p.11, 1990.

Y. Kimura and K. Okada, Lubricating Properties of Oil-In-Water Emulsions, Tribology Transactions, vol.4, issue.4, p.524, 1988.
DOI : 10.1016/0301-679X(84)90093-8

. Ratoi-salageanm and H. A. Spikes, Optimising film formation by oil-in-water emulsions, Tribology transactions, vol.404, pp.569-578, 1997.

A. Einstein, Eine neue Bestimmung der Molek??ldimensionen, Annalen der Physik, vol.17, issue.2, pp.289-306, 1906.
DOI : 10.1002/andp.19063240204

E. Barnea and J. Mizrahi, On the "Effective" Viscosity of Liquid-Liquid Dispersions, Industrial & Engineering Chemistry Fundamentals, vol.15, issue.2, pp.120-125, 1976.
DOI : 10.1021/i160058a007

S. Yan and S. Kuroda, Lubrication with emulsion, Wear, vol.206, issue.1-2, pp.238-243, 1997.
DOI : 10.1016/S0043-1648(96)07440-6

T. A. Dow, A rheology model for oil-in-water, Technical paper n° MS77-339, Society of manufacturing engineers, 1977.

G. T. Wan, P. Kenny, and H. Spikes, Elastohydrodynamic properties of water-based fire-resistant hydraulic fluids, Tribology International, vol.17, issue.6, pp.309-315, 1984.
DOI : 10.1016/0301-679X(84)90093-8

S. R. Schmid and . R. Wilsonw, Lubrication of Aluminum Rolling by Oil-in-Water Emulsions, Tribology Transactions, vol.62, issue.2, pp.452-458, 1995.
DOI : 10.1080/10402008908981921

G. Guangteng, P. M. Cann, and H. Spikes, A study of parched lubrication, Wear, vol.153, issue.1, pp.91-105, 1992.
DOI : 10.1016/0043-1648(92)90263-8

S. Schmid and W. Wilson, Lubrication mechanisms for oil-in-water emulsions, STLE, vol.52, issue.2, pp.168-175, 1996.

Y. P. Chiu, An Analysis and Prediction of Lubricant Film Starvation in Rolling Contact Systems, A S L E Transactions, vol.6, issue.1, pp.22-35, 1974.
DOI : 10.1080/05698197408981435

C. W. Wu and H. X. Sun, A new hydrodynamic lubrication theory for bilinear rheological fluids, Journal of Non-Newtonian Fluid Mechanics, vol.56, issue.3, pp.253-266, 1995.
DOI : 10.1016/0377-0257(94)01277-O

F. Chevalier, A. A. Lubrecht, P. M. Cann, F. Colin, and G. Dalmaz, Film Thickness in Starved EHL Point Contacts, Journal of Tribology, vol.120, issue.1, pp.126-133, 1998.
DOI : 10.1115/1.2834175

P. Lugt, Lubrication in cold rolling ? Numerical Simulation Using Multigrid Techniques, 1992.

A. Z. Szeri and S. H. Wang, An elasto-plasto-hydrodynamic model of strip rolling with oil/water emulsion lubricant, Tribology International, pp.169-176, 2004.

S. A. Patlazhan and J. T. Lindt, Kinetics of structure development in liquid???liquid dispersions under simple shear flow. Theory, Journal of Rheology, vol.40, issue.6, pp.1095-1113, 1996.
DOI : 10.1122/1.550774

B. Prunet-foch, F. Legay, M. Vignes-adler, and C. Delmotte, Impacting Emulsion Drop on a Steel Plate: Influence of the Solid Substrate, Journal of Colloid and Interface Science, vol.199, issue.2, pp.151-168, 1997.
DOI : 10.1006/jcis.1997.5339

G. G. Stockes, On the effect of the internal friction of fluids on the motion of pendulums Trans. Cambridge Philos. Soc. IX 8-106, 1851. Reprint: Mathematical and Physical Papers, 1966.

A. Azushima and T. Ideue, In Situ Measurement of Interface between Tool and Workpiece under MPH Lubrication by Means of Direct Fluorescence Observation Technique, Journal of the japan society for technology of plasticity, vol.42, issue.491, 2001.