E. Arzt, P. Dehm, P. Gumbsch, O. Kraft, and D. Weiss, Interface controlled plasticity in metals: dispersion hardening and thin film deformation, Progress in Materials Science, vol.46, issue.3-4, pp.283-307, 2001.
DOI : 10.1016/S0079-6425(00)00015-3

R. J. Asaro, Crystal Plasticity, Journal of Applied Mechanics, vol.50, issue.4b, pp.921-934, 1983.
DOI : 10.1115/1.3167205

R. J. Asaro, Micromechanics of Crystals and Polycrystals, Advances in Appl. Mech, vol.23, pp.1-115, 1983.
DOI : 10.1016/S0065-2156(08)70242-4

V. Bachu and S. Kalidindi, On the accuracy of the predictions of texture evolution by the finite element technique for fcc polycrystals, Materials Science and Engineering: A, vol.257, issue.1, pp.108-117, 1998.
DOI : 10.1016/S0921-5093(98)00828-4

S. P. Baker, R. M. Keller-flaig, and S. J. , Bauschinger effect and anomalous thermomechanical deformation induced by oxygen in passivated thin Cu films on substrates, Acta Materialia, vol.51, issue.10, pp.3019-3036, 2003.
DOI : 10.1016/S1359-6454(03)00113-7

S. P. Baker, A. Kretschmann, and E. Arzt, Thermomechanical behavior of different texture components in Cu thin films, Acta Materialia, vol.49, issue.12, 2001.
DOI : 10.1016/S1359-6454(01)00127-6

F. Barbe, L. Decker, D. Jeulin, and C. G. , Intergranular and intragranular behavior of polycrystalline aggregates. Part 1: F.E. model, International Journal of Plasticity, vol.17, issue.4, pp.513-536, 2001.
DOI : 10.1016/S0749-6419(00)00061-9

F. Barbe, L. Decker, D. Jeulin, and C. G. , Intergranular and intragranular behavior of polycrystalline aggregates.Part 2: Results, International Journal of Plasticity, vol.17, issue.4, pp.537-563, 2001.
DOI : 10.1016/S0749-6419(00)00062-0

A. Beaudoin, P. R. Dawson, K. K. Mathur, and K. U. , A hybrid finite element formulation for polycrystal plasticity with consideration of macrostructural and microstructural linking, International Journal of Plasticity, vol.11, issue.5, pp.501-521, 1995.
DOI : 10.1016/S0749-6419(99)80003-5

A. Beaudoin, K. K. Mathur, P. R. Dawson, and J. G. , Three-dimensional deformation process simulation with explicit use of polycrystal plasticity models, International Journal of Plasticity, vol.9, issue.7, pp.833-860, 1993.
DOI : 10.1016/0749-6419(93)90054-T

R. Becker, Analysis of texture evolution in channel die compression???I. Effects of grain interaction, Acta Metallurgica et Materialia, vol.39, issue.6, pp.1211-1230, 1991.
DOI : 10.1016/0956-7151(91)90209-J

R. Becker, Effects of strain localization on surface roughening during sheet forming, Acta Materialia, vol.46, issue.4, 1998.
DOI : 10.1016/S1359-6454(97)00182-1

M. Berveiller and A. Zaoui, An extension of the self-consistent scheme to plastically-flowing polycrystals, Journal of the Mechanics and Physics of Solids, vol.26, issue.5-6, p.325, 1978.
DOI : 10.1016/0022-5096(78)90003-0

A. Bhattacharyya, E. El-danaf, S. R. Kalidindi, and R. D. Doherty, Evolution of grain?scale microstructure during large strain simple compression of polycrystalline aluminium with quasi columnar grains : OIM measurements and numerical simulations, Acta Materialia, vol.17, pp.861-883, 2001.

U. Borg, Strain gradient crystal plasticity effects on flow localization, International Journal of Plasticity, vol.23, issue.8, pp.1400-1416, 2007.
DOI : 10.1016/j.ijplas.2007.01.003

T. E. Buchheit, G. W. Wellman, and C. C. Battaile, Investigating the limits of polycrystal plasticity modeling, International Journal of Plasticity, vol.21, issue.2, pp.221-249, 2005.
DOI : 10.1016/j.ijplas.2003.10.009

G. Cailletaud, A micromechanical approach to inelastic behaviour of metals, International Journal of Plasticity, vol.8, issue.1, 1992.
DOI : 10.1016/0749-6419(92)90038-E

K. Cheong and E. P. Busso, Discrete dislocation density modelling of single phase FCC polycrystal aggregates, Acta Materialia, vol.52, issue.19, pp.5665-5675, 2004.
DOI : 10.1016/j.actamat.2004.08.044

N. I. Cho and D. I. Park, Microstructures of copper thin films prepared by chemical vapor deposition, Thin Solid Films, vol.308, issue.309, pp.465-469, 1997.
DOI : 10.1016/S0040-6090(97)00441-0

Y. Choi and S. Suresh, Size effects on the mechanical properties of thin polycrystalline metal films on substrates, Acta Materialia, vol.50, issue.7, pp.1881-1893, 2002.
DOI : 10.1016/S1359-6454(02)00046-0

C. Déprés, C. F. Robertson, and M. C. , Crack initiation in fatigue: experiments and three?dimensional dislocation simulations, Materials Science and Engineering, pp.387-389, 2004.

B. Devincre, L. Kubin, and T. Hoc, Physical analyses of crystal plasticity by DD simulations, Scripta Materialia, vol.54, issue.5, pp.741-746, 2006.
DOI : 10.1016/j.scriptamat.2005.10.066
URL : https://hal.archives-ouvertes.fr/hal-00019068

O. Diard, S. Leclercq, G. Rousselier, and C. G. , Evaluation of finite element based analysis of 3D multicrystalline aggregates plasticity, International Journal of Plasticity, vol.21, issue.4, pp.691-722, 2005.
DOI : 10.1016/j.ijplas.2004.05.017
URL : https://hal.archives-ouvertes.fr/hal-00165134

L. Duchene and A. M. Habraken, Analysis of the sensitivity of FEM predictions to numerical parameters in deep drawing simulations, European Journal of Mechanics - A/Solids, vol.24, issue.4, pp.614-629, 2005.
DOI : 10.1016/j.euromechsol.2005.04.007

S. Forest, F. Barbe, and C. G. , Cosserat modelling of size effects in the mechanical behaviour of polycrystals and multi-phase materials, International Journal of Solids and Structures, vol.37, issue.46-47, pp.7105-7126, 2000.
DOI : 10.1016/S0020-7683(99)00330-3

L. B. Freund, The Stability of a Dislocation Threading a Strained Layer on a Substrate, Journal of Applied Mechanics, vol.54, issue.3, pp.553-554, 1987.
DOI : 10.1115/1.3173068

V. Gonda, K. M. Jansen, L. J. Ernst, J. Den-toonder, and G. Q. Zhang, Micro-mechanical testing of SiLK by nanoindentation and substrate curvature techniques, Microelectronics Reliability, vol.47, issue.2-3, pp.248-251, 2007.
DOI : 10.1016/j.microrel.2006.09.033

I. Groma, F. F. Csikor, and M. Zaiser, Spatial correlations and higher-order gradient terms in a continuum description of dislocation dynamics, Acta Materialia, vol.51, issue.5, pp.1271-1281, 2003.
DOI : 10.1016/S1359-6454(02)00517-7

C. Han, A. Ma, F. Roters, and R. D. , A Finite Element approach with patch projection for strain gradient plasticity formulations, International Journal of Plasticity, vol.23, issue.4, pp.690-710, 2007.
DOI : 10.1016/j.ijplas.2006.08.003

S. Harren and R. Asaro, Nonuniform deformations in polycrystals and aspects of the validity of the Taylor model, Journal of the Mechanics and Physics of Solids, vol.37, issue.2, p.191, 1989.
DOI : 10.1016/0022-5096(89)90010-0

S. Harren, H. Déve, and R. Asaro, Shear band formation in plane strain compression, Acta Metallurgica, vol.36, issue.9, pp.2435-2480, 1988.
DOI : 10.1016/0001-6160(88)90193-9

M. Hommel and O. Kraft, Deformation behavior of thin copper films on deformable substrates, Acta Materialia, vol.49, issue.19, pp.3935-3947, 2001.
DOI : 10.1016/S1359-6454(01)00293-2

F. Houdauigui, . El, S. Forest, A. Gourgues, and J. D. , On the Size of the Representative Volume Element for Isotropic Elastic Polycrystalline Copper, IUTAM Symposium on Mechanical Behavior and Micro?Mechanics of Nanostructured Materials, pp.171-180, 2005.
DOI : 10.1007/978-1-4020-5624-6_17

F. Houdauigui, . El, S. Forest, A. Gourgues, and J. D. , Representative Volume Element sizes for copper bulk polycrystals and thin layers, Colloque 3M ? Interfaces de'l atome au polycrystal, pp.141-153, 2006.

H. Huang and F. Spaepen, Tensile testing of free-standing Cu, Ag and Al thin films and Ag/Cu multilayers, Acta Materialia, vol.48, issue.12, pp.3261-3269, 2000.
DOI : 10.1016/S1359-6454(00)00128-2

G. C. Janssen, Stress and strain in polycrystalline thin films, Thin Solid Films, vol.515, issue.17, pp.6654-6664, 2007.
DOI : 10.1016/j.tsf.2007.03.007

S. R. Kalidindi, C. A. Bronkhorst, and A. L. , Crystallographic texture evolution in bulk deformation processing of FCC metals, Journal of the Mechanics and Physics of Solids, vol.40, issue.3, pp.537-569, 1992.
DOI : 10.1016/0022-5096(92)80003-9

T. Kanit, S. Forest, I. Galliet, V. Mounoury, and J. D. , Determination of the size of the representative volume element for random composites: statistical and numerical approach, International Journal of Solids and Structures, vol.40, issue.13-14, pp.3647-3679, 2003.
DOI : 10.1016/S0020-7683(03)00143-4

Y. Kawasaki and T. Takeuchi, Cell structures in copper single crystals deformed in the [001] and [111] axes, Scripta Metallurgica, vol.14, issue.2, pp.183-188, 1980.
DOI : 10.1016/0036-9748(80)90091-5

R. Keller, S. P. Baker, and E. Arzt, Stress???temperature behavior of unpassivated thin copper films, Acta Materialia, vol.47, issue.2, pp.415-426, 1999.
DOI : 10.1016/S1359-6454(98)00387-5

S. H. Kim, S. W. Na, N. Lee, N. , Y. W. Kim et al., Effect of surface roughness on the adhesion properties of Cu/Cr films on polyimide substrate treated by inductively coupled oxygen plasma, Surface and Coatings Technology, vol.200, issue.7, pp.2072-2079, 2005.
DOI : 10.1016/j.surfcoat.2005.05.021

D. B. Knorr and D. P. Tracy, A review of microstructure in vapor deposited copper thin films, Materials Chemistry and Physics, vol.41, issue.3, pp.206-216, 1995.
DOI : 10.1016/0254-0584(95)01515-9

M. J. Kobrinsky, G. Dehm, C. V. Thompson, and E. Arzt, Effects of thickness on the characteristic length scale of dislocation plasticity in Ag thin films, Acta Materialia, vol.49, issue.17, pp.3597-3607, 2001.
DOI : 10.1016/S1359-6454(01)00225-7

U. F. Kocks and H. Chandra, Slip geometry in partially constrained deformation, Acta Metallurgica, vol.30, issue.3, 1982.
DOI : 10.1016/0001-6160(82)90119-5

E. V. Kozlov, A. N. Zhdanov, N. A. Popova, E. E. Pekarskaya, and K. N. , Subgrain structure and internal stress fields in UFG materials: problem of Hall???Petch relation, Materials Science and Engineering: A, vol.387, issue.389, pp.397-389, 2004.
DOI : 10.1016/j.msea.2003.12.081

O. Kraft, M. Hommel, and E. Arzt, X-ray diffraction as a tool to study the mechanical behaviour of thin films, Materials Science and Engineering: A, vol.288, issue.2, pp.209-216, 2000.
DOI : 10.1016/S0921-5093(00)00876-5

M. Kuroda and V. Tvergaard, On the formulations of higher-order strain gradient crystal plasticity models, Journal of the Mechanics and Physics of Solids, vol.56, issue.4, 2007.
DOI : 10.1016/j.jmps.2007.07.015

S. Lazik, C. Esling, and W. J. , Cracking in Zinc Layers on Continuous Galvanized Sheets: A Review, Textures and Microstructures, vol.23, issue.3, pp.131-147, 1995.
DOI : 10.1155/TSM.23.131

R. Lebensohn, Y. Liu, and P. Castaneda, On the accuracy of the self-consistent approximation for polycrystals: comparison with full-field numerical simulations, Acta Materialia, vol.52, issue.18, pp.5347-5361, 2004.
DOI : 10.1016/j.actamat.2004.07.040

A. Ma, F. Roters, and R. D. , Studying the effect of grain boundaries in dislocation density based crystal-plasticity finite element simulations, International Journal of Solids and Structures, vol.43, issue.24, pp.7287-7303, 2006.
DOI : 10.1016/j.ijsolstr.2006.07.006

S. Maeda, H. Shimomura, A. Fujisawa, and M. Konishi, The structure and deformation behavior of hot-dip galvanized coatings, Scripta Materialia, vol.35, issue.3, pp.333-338, 1996.
DOI : 10.1016/1359-6462(96)00160-1

R. Mahmudi and M. Mehdizadeh, Surface roughening during uniaxial and equi-biaxial stretching of 70-30 brass sheets, Journal of Materials Processing Technology, vol.80, issue.81, pp.80-81, 1998.
DOI : 10.1016/S0924-0136(98)00099-5

J. Mandel, Equations constitutives et directeurs dans les milieux plastiques et viscoplastiques, International Journal of Solids and Structures, vol.9, issue.6, pp.725-740, 1973.
DOI : 10.1016/0020-7683(73)90120-0

A. U. Mane and S. A. Shivashankar, Growth of (111)-textured copper thin films by atomic layer deposition, Journal of Crystal Growth, vol.275, issue.1-2, pp.1253-1257, 2005.
DOI : 10.1016/j.jcrysgro.2004.11.143

W. Mao, Modeling of rolling texture in aluminum, Materials Science and Engineering: A, vol.257, issue.1, pp.171-172, 1998.
DOI : 10.1016/S0921-5093(98)00836-3

L. Méric, G. Cailletaud, and M. Gasperini, F.E. calculations of copper bicrystal specimens submitted to tension-compression tests, Acta Metallurgica et Materialia, vol.42, issue.3, 1994.
DOI : 10.1016/0956-7151(94)90287-9

L. Méric, P. Poubanne, and C. G. , Single Crystal Modeling for Structural Calculations: Part 1???Model Presentation, Journal of Engineering Materials and Technology, vol.113, issue.1, pp.162-170, 1991.
DOI : 10.1115/1.2903374

D. Mika and P. R. Dawson, Effects of grain interaction on deformation in polycrystals, Materials Science and Engineering: A, vol.257, issue.1, pp.62-76, 1998.
DOI : 10.1016/S0921-5093(98)00824-7

D. Mika and P. R. Dawson, Polycrystal plasticity modeling of intracrystalline boundary textures, Acta Materialia, vol.47, issue.4, pp.1355-1369, 1999.
DOI : 10.1016/S1359-6454(98)00386-3

A. Molinari and G. R. Canova, A self consistent approach of the large deformation polycrystal viscoplasticity, Acta Metallurgica, vol.35, issue.12, pp.2983-2994, 1987.
DOI : 10.1016/0001-6160(87)90297-5

A. Musienko, A. Tatschl, K. Schmidegg, O. Kolednik, R. Pippan et al., Three-dimensional finite element simulation of a polycrystalline copper specimen, Acta Materialia, vol.55, issue.12, pp.4121-4136, 2007.
DOI : 10.1016/j.actamat.2007.01.053
URL : https://hal.archives-ouvertes.fr/hal-00165818

L. Nicola, E. Van-der-giessen, and A. Needleman, Size effects in polycrystalline thin films analyzed by discrete dislocation plasticity, Thin Solid Films, vol.479, issue.1-2, pp.329-338, 2005.
DOI : 10.1016/j.tsf.2004.12.012

W. D. Nix, Mechanical properties of thin films, Metallurgical transactions A? Physical Metallurgy and Materials Science, pp.2217-2218, 1989.
DOI : 10.1007/BF02666659

J. Oh, J. Lee, and L. Ch, Plasma pretreatment of the Cu seed layer surface in Cu electroplating, Materials Chemistry and Physics, vol.73, issue.2-3, pp.227-234, 2002.
DOI : 10.1016/S0254-0584(01)00378-9

G. Palumbo and L. Tricarico, Numerical and experimental investigations on the Warm Deep Drawing process of circular aluminum alloy specimens, Journal of Materials Processing Technology, vol.184, issue.1-3, pp.115-123, 2007.
DOI : 10.1016/j.jmatprotec.2006.11.024

R. Parisot, S. Forest, A. Gourgues, A. Pineau, and M. D. , Modeling the mechanical behavior of a multicrystalline zinc coating on a hot-dip galvanized steel sheet, Computational Materials Science, vol.19, issue.1-4, 2001.
DOI : 10.1016/S0927-0256(00)00155-5

R. Parisot, S. Forest, A. Pineau, F. Nguyen, X. Demonet et al., Deformation and damage mechanisms of zinc coatings on hot-dip galvanized steel sheets: Part I. Deformation modes, Metallurgical and Materials Transactions A, vol.11, issue.3, 2004.
DOI : 10.1007/s11661-004-0007-x
URL : https://hal.archives-ouvertes.fr/hal-00172912

M. T. Perez-prado and J. J. Vlassak, Microstructural evolution in electroplated Cu thin films, Scripta Materialia, vol.47, issue.12, pp.817-823, 2002.
DOI : 10.1016/S1359-6462(02)00308-1

D. Raabe and F. Roters, Using texture components in crystal plasticity finite element simulations, International Journal of Plasticity, vol.20, issue.3, pp.339-361, 2004.
DOI : 10.1016/S0749-6419(03)00092-5

D. Raabe, M. Sachtleber, H. Weiland, G. Scheele, and Z. Zhao, Grain-scale micromechanics of polycrystal surfaces during plastic straining, Acta Materialia, vol.51, issue.6, pp.1539-1560, 2003.
DOI : 10.1016/S1359-6454(02)00557-8

D. Raabe, Y. Wang, and R. F. , Crystal plasticity simulation study on the influence of texture on earing in steel, Computational Materials Science, vol.34, issue.3, pp.221-234, 2005.
DOI : 10.1016/j.commatsci.2004.12.072

D. Raabe, Z. Zhao, and M. W. , On the dependence of in-grain subdivision and deformation texture of aluminum on grain interaction, Acta Materialia, vol.50, issue.17, pp.4379-4394, 2002.
DOI : 10.1016/S1359-6454(02)00276-8

J. L. Raphanel and P. Van-houtte, Simulation of the rolling textures of b.c.c. metals by means of the relaxed taylor theory, Acta Metallurgica, vol.33, issue.8, pp.1481-1488, 1985.
DOI : 10.1016/0001-6160(85)90049-5

G. Sachs, Zur ableitung einer fleissbedingun, Z Ver Dtsch Ing, vol.72, pp.734-735, 1928.

M. Sachtleber, D. Raabe, and W. H. , Surface roughening and color changes of coated aluminum sheets during plastic straining, Journal of Materials Processing Technology, vol.148, issue.1, pp.68-76, 2004.
DOI : 10.1016/j.jmatprotec.2004.01.041

K. Sai, G. Cailletaud, and F. S. , Micro-mechanical modeling of the inelastic behavior of directionally solidified materials, Mechanics of Materials, vol.38, issue.3, pp.203-217, 2006.
DOI : 10.1016/j.mechmat.2005.06.007

G. B. Sarma and P. R. Dawson, Effects of interactions among crystals on the inhomogeneous deformations of polycrystals, Acta Materialia, vol.44, issue.5, pp.1937-1953, 1996.
DOI : 10.1016/1359-6454(95)00309-6

R. Schwaiger, G. Dehm, and O. Kraft, Cyclic deformation of polycrystalline Cu films, Philosophical Magazine, vol.28, issue.6, 2003.
DOI : 10.1002/crat.19790141019

R. Schwaiger and O. Kraft, Size effects in the fatigue behavior of thin Ag films, Acta Materialia, vol.51, issue.1, 2003.
DOI : 10.1016/S1359-6454(02)00391-9

J. Y. Shu and N. A. Fleck, Strain gradient crystal plasticity: size-dependentdeformation of bicrystals, Journal of the Mechanics and Physics of Solids, vol.47, issue.2, pp.297-324, 1999.
DOI : 10.1016/S0022-5096(98)00081-7

B. Bibliography?bibliography?i?ka, F. Forest, S. Gumbsch, and P. , Simulation of stress?strain heterogeneities in copper thin films: Texture and substrate effects, Computational Materials Science, vol.39, pp.137-141, 2007.

F. Si?ka, S. Forest, P. Gumbsch, and W. D. , Finite element simulations of the cyclic elastoplastic behaviour of copper thin films, Modelling and Simulation in Materials Science and Engineering, vol.15, issue.1, pp.217-238, 2007.
DOI : 10.1088/0965-0393/15/1/S17

F. Spaepen and D. Y. Yu, A comparison of the strength of multilayers, thin films and nanocrystalline compacts, Scripta Materialia, vol.50, issue.6, pp.729-732, 2004.
DOI : 10.1016/j.scriptamat.2003.11.038

G. I. Taylor, Plastic strain in metals, J Inst Metals, vol.62, pp.307-324, 1938.

C. Teodosiu and F. Sidoroff, A theory of finite elastoviscoplasticity of single crystals, International Journal of Engineering Science, vol.14, issue.2, pp.165-176, 1976.
DOI : 10.1016/0020-7225(76)90085-9

C. Teodosiu and P. Sidoroff, A finite theory of the elastoviscoplasticity of single crystals, International Journal of Engineering Science, vol.14, issue.8, pp.713-723, 1976.
DOI : 10.1016/0020-7225(76)90027-6

C. V. Thompson, The yield stress of polycrystalline thin films, Journal of Materials Research, vol.54, issue.02, pp.237-238, 1993.
DOI : 10.1557/JMR.1992.2040

I. Tikhovskiy, D. Raabe, and R. F. , Simulation of earing during deep drawing of an Al???3% Mg alloy (AA 5754) using a texture component crystal plasticity FEM, Journal of Materials Processing Technology, vol.183, issue.2-3, pp.169-175, 2007.
DOI : 10.1016/j.jmatprotec.2006.10.006

E. Van-der-giessen and A. Needleman, Discrete Dislocation Plasticity, Modelling and Simulation in Material Science and Engineering, vol.3, 1995.
DOI : 10.1007/978-1-4020-3286-8_56
URL : https://hal.archives-ouvertes.fr/hal-00513992

R. P. Vinci, E. M. Zielinsky, and J. C. Bravman, Thermal strain and stress in copper thin films, Thin Solid Films, vol.262, issue.1-2, 1995.
DOI : 10.1016/0040-6090(95)05834-6

. Virginia-semiconductor-inc, Basic mechanical and thermal properties of silicon, 2006.

B. Bibliography-von-blanckenhagen, E. Artz, and P. Gumbsch, Discrete dislocation simulation of plastic deformation in metal thin films, Acta Materialia, vol.52, issue.3, pp.773-784, 2004.
DOI : 10.1016/j.actamat.2003.10.022

B. Von-blanckenhagen, P. Gumbsch, and E. Artz, Dislocation sources in discrete dislocation simulations of thin-film plasticity and the Hall-Petch relation, Modelling and Simulation in Materials Science and Engineering, vol.9, issue.3, pp.157-169, 2001.
DOI : 10.1088/0965-0393/9/3/303

T. Walde and H. Riedel, Simulation of earing during deep drawing of magnesium alloy AZ31, Acta Materialia, vol.55, issue.3, pp.867-874, 2007.
DOI : 10.1016/j.actamat.2006.09.007

V. Weihnacht and W. Bruckner, Abnormal grain growth in {111} textured Cu thin films, Thin Solid Films, vol.418, issue.2, pp.136-144, 2002.
DOI : 10.1016/S0040-6090(02)00697-1

D. Weiss, H. Gao, and E. Arzt, Constrained diffusional creep in UHV-produced copper thin films, Acta Materialia, vol.49, issue.13, 2001.
DOI : 10.1016/S1359-6454(01)00168-9

H. Wendrock, W. Brückner, M. Hecker, T. G. Koetter, and H. Schloreb, Room temperature grain growth in electroplated copper thin films, Microelectronics Reliability, vol.40, issue.8-10, pp.1301-1304, 2000.
DOI : 10.1016/S0026-2714(00)00145-1

D. Weygand, Y. Brechet, and L. J. , A vertex dynamics simulation of grain growth in two dimensions, Philosophical Magazine Part B, vol.175, issue.4, pp.329-352, 1998.
DOI : 10.1080/13642819708205718

D. Weygand, L. H. Friedman, E. Van-der-giessen, and A. Needlemann, Aspects of boundary-value problem solutions with three-dimensional dislocation dynamics, Modelling and Simulation in Materials Science and Engineering, vol.10, issue.4, pp.437-468, 2002.
DOI : 10.1088/0965-0393/10/4/306

D. Weygand and P. Gumbsch, Study of dislocation reactions and rearrangements under different loading conditions, Materials Science and Engineering: A, vol.400, issue.401, pp.400-401, 2005.
DOI : 10.1016/j.msea.2005.03.102

D. Weygand, M. Poignant, P. Gumbsch, and O. Kraft, Three-dimensional dislocation dynamics simulation of the influence of sample size on the stress???strain behavior of fcc single-crystalline pillars, Press, Corrected Proof, 2007.
DOI : 10.1016/j.msea.2006.09.183

A. Wikström and M. Nygårds, Anisotropy and texture in thin copper films???an elasto-plastic analysis, Acta Materialia, vol.50, issue.4, pp.857-870, 2002.
DOI : 10.1016/S1359-6454(01)00358-5

W. R. Wilson and W. Lee, Mechanics of Surface Roughening in Metal Forming Processes, Journal of Manufacturing Science and Engineering, vol.123, issue.2, pp.279-283, 2001.
DOI : 10.1115/1.1363596

N. J. Wittridge and K. R. , A microtexture based analysis of the surface roughening behaviour of an aluminium alloy during tensile deformation, Materials Science and Engineering: A, vol.269, issue.1-2, pp.205-216, 1999.
DOI : 10.1016/S0921-5093(99)00145-8

S. Yefimov and E. Van-der-giessen, Size effects in single crystal thin films: nonlocal crystal plasticity simulations, European Journal of Mechanics - A/Solids, vol.24, issue.2, pp.183-193, 2005.
DOI : 10.1016/j.euromechsol.2005.01.002