K. Le-facteur-de-concentration-de-contrainte-en-fatigue, 102 4.1.3 Les approches " non locales "

A. Annexe and .. 'un-modèlé-ecrit-en-déformation, 216 A.2 Essais SOCRAX 220 A.2.1 Essai 1 : torsion ? eq = 390 221 A.2.2 Essai 2 : traction-torsion ? eq = 390, p.235

. Fig, A.5 ? Essai 1 torsion -Détermination du nombre de cyclesàcycles`cyclesà amorçage

S. Bibliographie, Y. Andrieux, &. J. Bamberger, A. Marigo, Z. P. Banvillet et al., Un modèle de matériau fissuré pour les bétons et les roches Prévision de durée de vie en fatigue multiaxiale sous chargements réels : vers des essais accélérés [Basquin 10] O. H. Basquin. The exponential law of endurance tests Nonlocal Integral Formulations of Plasticity and Damage : Survey of Progress The fatigue behaviour of three dimensional stress concentrations Mécanique non linéaire des matériaux Cube slip in near-[111] oriented specimens of a single-crystal nickel-base superalloy Etude de l'endommagement d'un superalliage monocristallin en fatigue thermo-mécanique multiaxiale, Comparison of Two Self-Consistent Models to Predict the Cyclic Behavior of Polycrystals. Journal of Engineering Materials and Technology Thèse de doctorat, Ecole Nationale Supérieure des Arts et Métiers Proceedings of the American Society for Testing and Materials Thèse de doctoratBoursin 96] A. Boursin, J.-L. Chaboche & F. Roudolff. Damage mechanics with unilateral conditions and elastic energy storage, pp.62-69, 1910.

G. Cailletaud, Une approche micromécanique phénoménologique du comportement inélastique des métaux, Thèse de doctorat, d'Etat, 1987.

]. J. Cardona-00 and . Cardona, Comportement et durées de vie despì eces multiperforées : application aux aubes de turbines, 2000.

J. L. Chaboche, Une loi différentielle d'endommagement de fatigue avec cumulation non linéaire, Revue Française de Mécanique, pp.50-51, 1974.

J. L. Chaboche, Sur l'utilisation des variables d'´ etat interne pour la description de la viscoplasticité cyclique avec endommagement, Probì emes Non Linéaires de Mécanique, Symposium Franco-Polonais de Rhéologie et Mécanique, pp.137-159, 1977.

J. L. Chaboche, K. Dang-van, and &. G. Cordier, Modelization of the strain memory effect on the cycle hardening of 316 stainless steel, 5th International Conference on structural mechanics in reactor technology (SMIRT-5), BERLIN, pp.13-21, 1979.

J. L. Chaboche, M. Boudifa, and &. K. Saanouni, A CDM Approach of Ductile Damage with Plastic Compressibility, International Journal of Fracture, vol.32, issue.1, pp.51-75, 2006.
DOI : 10.1007/s10704-005-3061-5

E. Charkaluk, A. Bignonnet, A. Constantinescu, and &. Van, Fatigue design of structures under thermomechanical loadings, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.9, issue.2, p.1199, 2002.
DOI : 10.1046/j.1460-2695.2000.00267.x
URL : https://hal.archives-ouvertes.fr/hal-00111365

E. Chataigner and &. L. Rémy, Thermomechanical fatigue behavior of coated and bare Nickel-based superalloy single crystals. Dans : Fatigue under thermal and Mechanical loading, International Symposium, 1995.

&. M. Rossetto, Evaluation of the fatigue strength of notched specimens by the point and line methods with high stress ratios

J. P. Cordebois and &. F. Sidoroff, Anisotropié elastique induite par l'endommagement, 1979.

R. Desmorat, J. Lemaitre, and &. M. Sauzay, Loi d'´ evolution de l'endommagement anisotrope, Série II b, pp.1231-1236, 1999.

J. C. Devaux, Y. C. Escatha, J. L. Bernard, and &. , Pellisier-Tanon. A criterion for analysing fatigue crack initiation in geometrical singularities, pp.211-222, 1980.

N. E. Downling and &. D. Socie, Estimation and correlation of fatigue lives for random loading, International Journal of Fatigue, vol.10, issue.3, pp.179-185, 1982.
DOI : 10.1016/0142-1123(88)90060-6

J. F. Flavenot and &. N. Skalli, L'´ epaisseur de couche critique ou une nouvelle approche du calcul en fatigue des structures soumisesàsoumises`soumisesà des sollicitations multiaxiales, Mec. Mater. Electr, vol.397, pp.15-25, 1983.

]. E. Fleury, Endommagement du superalliage monocristallin AM1 en fatigue isotherme et anisotherme, Thèse de doctorat, 1991.

]. R. Forman, Numerical Analysis of Crack Propagation in Cyclic-Loaded Structures, Journal of Basic Engineering, vol.89, issue.3, p.459, 1967.
DOI : 10.1115/1.3609637

F. Gallerneau, Etude et modélisation de l'endommagement d'un superalliage monocristallin revêtu pour aube de turbine, 1995.

F. Gallerneau and &. P. Paulmier, Comportement et endommagement des monocristaux, 1998.

A. Gaubert, J. L. Bouvard, and &. F. Gallerneau, Etude et modélisation de la propagation de fissure dans les superalliages monocristallins en zone de concentration de contrainte, Colloque National Mécamat Aussois, 2007.

A. L. Gurson, Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I???Yield Criteria and Flow Rules for Porous Ductile Media, Journal of Engineering Materials and Technology, vol.99, issue.1, pp.2-15, 1977.
DOI : 10.1115/1.3443401

G. R. Halford, The energy required for fatigue (Plastic strain hysteresis energy required for fatigue in ferrous and nonferrous metals), Journal of Materials, vol.1, pp.3-18, 1966.

F. Hanriot, Comportement du superalliage monocristallin AM1 sous sollicitations cycliques, Thèse de doctorat, 1993.
URL : https://hal.archives-ouvertes.fr/pastel-00001531

R. B. Heywood, Stress concentration factors : relating theoretical and practical factors in fatigue loading, Engineering, vol.179, pp.146-148, 1955.

M. Kaminski, J. L. Bouvard, J. L. Chaboche, F. Feyel, F. Gallerneau et al., Application of the SOCRAX methods to AE components and test cases, 2007.

]. S. Kang and &. E. Kim, Effect of electrical discharge machining process on crack susceptibility of nickel based heat resistant alloy, Materials Science and Technology, vol.17, issue.7, p.817, 2005.
DOI : 10.1016/S0924-0136(98)00314-8

A. Koster, A. M. Alam, and &. L. Rémy, A physical-base model for life prediction of single crystal turbine blades under creep-fatigue loading and thermal transient conditions, International Conference on Temperature- Fatigue Interaction-Ninth International Spring Meeting, SF2M, pp.203-212, 2002.
DOI : 10.1016/S1566-1369(02)80077-2

D. Krajcinovic, &. G. Fonseka, L. P. Kubin, G. Canova, M. Condat et al., Dislocation microstructures and plastic flow : a 3D simulation Solid State Phenom Sur une théorie de l'endommagement anisotrope BLSURF -Mailleur de surfaces composées de carreaux paramétrés -Manuel d'utilisation, n o 0232, thème 4 Creep rupture of structures [Lemaitre 85] J. Lemaitre. A continuous damage mechanics model for ductile fracture Mechanics of Solid Materials. Cambridge, 1990. [Lemaitre 92] J. Lemaitre. A course on damage mechanics Life analysis of a fcc single crystal and simulation of crack propagation by blunting and resharpening Simulation of fatigue crack propagation in ductile metals by blunting and re-sharpening A new formulation of continuum damage mechanics (CDM) for composite materials, The continuous damage theory of brittle materials. Parts 1 and 2. J. of Applied Mechanics Rapport technique, Institut National de Recherche en Informatique et en Automatique Proc. Royal Soc. LondonLevkovitch 05Madec 01] R. Madec. Des interactions entre dislocationsàdislocations`dislocationsà la plasticité du monocristal cfc : Etude par dynamique des dislocations Thèse de doctoratManson 53] S. S. Manson. Behaviour of materials under conditions of thermal stresses, NACA TN-2933. 1953. [Manson 66] S. S. Manson. Interface between fatigue creep and fracture Marquis & D. F. Socie. Multiaxial Fatigue. Society of Automotive Engineers, pp.809-824, 1966.

J. Mazars, A model of unilateral elastic damageable material and its application to concrete, 1986.

]. L. Méric-91a, &. G. Méric, and . Cailletaud, Single Crystal Modeling for Structural Calculations: Part 2???Finite Element Implementation, Journal of Engineering Materials and Technology, vol.113, issue.1, pp.171-182, 1991.
DOI : 10.1115/1.2903375

]. L. Méric-91b, P. Méric, &. G. Poubanne, and . Cailletaud, Single Crystal Modeling for Structural Calculations: Part 1???Model Presentation, Journal of Engineering Materials and Technology, vol.113, issue.1, pp.162-170, 1991.
DOI : 10.1115/1.2903374

]. J. Morrow, Fatigue Design Handbook Advances in Engineering, pp.21-29, 1968.

S. Murakami and &. N. Ohno, A Continuum Theory of Creep and Creep Damage, A. R. S. Ponter et D. R. Hayhurst, IUTAM, 1980.
DOI : 10.1007/978-3-642-81598-0_28

D. Nouailhas and &. J. Culié, Development and Application of a model for single crystal superalloys, International Conference on High Temperature Constitutive Modeling, 1991.

D. Nouailhas, J. P. Culié, G. Cailletaud, and &. L. Méric, Finite element analysis of the stress-strain behavior of single crystal tubes, European Journal of Mechanics A/Solids, vol.14, pp.137-154, 1995.

. Palin-luc-98-]-t, &. S. Palin-luc, and . Lasserre, An energy based criterion for high cycle multiaxial fatigue, European Journal of Mechanics - A/Solids, vol.17, issue.2, pp.237-51, 1998.
DOI : 10.1016/S0997-7538(98)80084-3

I. V. Papadopoulos and &. V. Panoskaltsis, Invariant formulation of a gradient dependent multiaxial high-cycle fatigue criterion, Engineering Fracture Mechanics, vol.55, issue.4, pp.513-528, 1996.
DOI : 10.1016/S0013-7944(96)00047-1

P. C. Paris and &. C. Erdogan, A Critical Analysis of Crack Propagation Laws, Journal of Basic Engineering, vol.85, issue.4, pp.528-533, 1963.
DOI : 10.1115/1.3656900

P. Paulmier, F. Gallerneau, A. Köster, L. Rémy, H. Harders et al., Creep-fatigue crack growth in complex specimen geometries and multiaxial cyclic loads, 2007.

P. Perruchaud, Etude des interactions fatigue-fluage-oxydation sur l'endommagement du superalliage monocristallin AM1, Thèse de doctorat, 1997.

R. E. Peterson, Notch sensitivity, Metal fatigue, pp.293-306, 1959.

R. E. Peterson, The role of stress distribution in fatigue, Experimental Mechanics, vol.5, issue.No. 1, pp.105-115, 1961.
DOI : 10.1007/BF02323115

R. E. Peterson, Stress Concentration Factors, Journal of Applied Mechanics, vol.42, issue.1, 1974.
DOI : 10.1115/1.3423544

G. Pijaudier-cabot and &. Z. Bazant, Nonlocal Damage Theory, Journal of Engineering Mechanics, vol.113, issue.10, pp.1512-1533, 1987.
DOI : 10.1061/(ASCE)0733-9399(1987)113:10(1512)

G. Pluvinage, S. Bentachfine, J. Gilbert, Z. Azari, and &. D. Bouami, Notch effect in low cycle fatigue, Int. J. Fatigue, vol.21, pp.421-430, 1999.

G. Pluvinage and &. H. Adib, Theoretical and numerical aspects of the volumetric approach for fatigue life prediction in notched components

P. Poubanne, Etude et modélisation du comportement mécanique d'un superalliage monocristallin pour aube de turbine, 1989.

P. Prigent, Modélisation de la propagation de fissure dans l'Astroloyà Astroloy`Astroloyà 650 ? C avec intéraction fatigue-fluage-oxydation, Thèse de doctorat, Ecole Nationale des Ponts et Chaussées, 1993.

Y. N. Rabotnov, Creep Problems in Structural Members, Journal of Applied Mechanics, vol.37, issue.1, 1969.
DOI : 10.1115/1.3408479

L. Rémy and &. J. Reuchet, Fatigue-Oxydation interaction in a superalloy -Application to life prediction in high temperature low cycle fatigue, Metallurgical Transactions, vol.14, pp.141-190, 1983.

M. Aria, F. Blümm, &. C. Meyer-olbersleben, and . Engler-pinto, Crack initiation and propagation of some nickel base superalloys : Effect of material anisotropy and test conditions. Paris, 15th and 16th February, Proceedings of SOCRAX Workshop : Deformation and Fracture in nickel-base superalloys at elevated temperatures : testing, modelling and applications, 2007.

K. Saanouni and &. A. Abdul-latif, Micromechanical modeling of low cycle fatigue under complex loadings ??? Part I. Theoretical formulation, International Journal of Plasticity, vol.12, issue.9, pp.1111-1121, 1996.
DOI : 10.1016/S0749-6419(96)00043-5

M. Satoh and &. E. Krempl, An incremental life prediction law for creepfatigue interaction, BIBLIOGRAPHIE, vol.10, pp.71-79, 1982.

C. M. Sonsino, H. Kaufmann, and &. V. Gubrisic, Transferability of Material Data for the Example of a Randomly Loaded Forged Truck Stub Axle, SAE Technical Paper Series, pp.1-22, 1997.
DOI : 10.4271/970708

]. D. Taylor, Geometrical effects in fatigue: a unifying theoretical model, International Journal of Fatigue, vol.21, issue.5
DOI : 10.1016/S0142-1123(99)00007-9

]. D. Taylor, Fatigue, Proceedings of XXXI conference of the Italian Association of Stress Analysis (AIAS), 2002.
DOI : 10.1016/B978-008044478-9/50010-7
URL : https://hal.archives-ouvertes.fr/hal-01295824

R. Tovo, E. Benvenuti, and &. P. Livieri, A gradient formulation for the prediction of the static failure load of brittle notched components, 2004.

&. P. Voyiadjis and . Kattan, Damage of fiber-reinforced composite materials with micromechanical characterization, International Journal of Solids and Structures, vol.30, issue.20, pp.2757-2778, 1993.
DOI : 10.1016/0020-7683(93)90153-X