J. Ascough, H. E. Bez, and A. M. Bricis, A simple beam element, large displacement model for ?nite element simulation of cloth drape Analysis of the interply porosities in thermoplastic composites forming processes, J. Text. Inst. International Journal of Forming Processes, vol.87, issue.5, pp.247-258, 1996.

[. Adolf and J. E. Martin, Calculation of Stresses in Crosslinking Polymers, Journal of Composite Materials, vol.22, issue.1, p.13, 1996.
DOI : 10.1177/002199839603000102

]. M. Aon96 and . Aono, Wrinkle propagation model for cloth, Computer Graphics Around the World, pp.95-115, 1996.

[. Astm, Annual book of standards, textiles-yarns, fabrics, general test methods, p.1, 1987.

S. [. Bruschke and . Advani, A numerical approach to model nonisothermal viscous ?ow through ?brous media with free surfaces, International Journal of Solids and Structures, vol.19, p.575, 1994.

J. [. Blanlot and . Billoët, Numerical formulation of the evolution anisotropic behavior of composite fabrics in order to simulation forming processes, Proceedings of ICCM-10, pp.229-236, 1995.

[. Boubaker, B. Haussy, and J. F. Gangho¤er, Mod??les discrets de structures tiss??es : Analyse de stabilit?? et de drap??, Modèles discrets de structures tissées : Analyse de stabilité et de drapé, pp.871-877, 2002.
DOI : 10.1016/S1631-0721(02)01544-9

A. [. Borouchaki and . Cherouat, Drapage g??om??trique des composites, Comptes Rendus M??canique, vol.331, issue.6, pp.437-442, 2003.
DOI : 10.1016/S1631-0721(03)00087-1

]. H. Bcbdl01, A. Borouchaki, J. L. Cherouat, P. Billoët, and . De-luca, Integration of a new geometrical model for textile forming processes in the quickform software, Proceedings of the Fourth International ESAFORM Conference on Material Forming (Liège), pp.103-106, 2001.

A. [. Boisse, J. C. Cherouat, H. Gelin, and . Sabhi, Experimental study and finite element simulation of a glass fiber fabric shaping process, Polymer Composites, vol.64, issue.1, pp.83-95, 1995.
DOI : 10.1002/pc.750160111

]. O. Ber93 and . Bergsma, Computer simulation of 3d forming processes of fabricreinforced plastics, Proc. Of 9th International Conference on Composite Materials (ICCM/9), pp.560-567, 1993.

]. O. Ber95, . [. Bergsma, A. Boisse, G. Gasser, and . Hivet, Three-dimensional simulation of fabric draping Analyses of fabric tensile behaviour : determination of the biaxial tension-strain surfaces and their use in forming simulations, pp.32-1395, 1995.

J. [. Bergsma, . [. Huisman, P. Bigaud, and . Hamelin, Deep drawing of fabric -reinforced thermoplastics , CadComp Conference Mechanical properties prediction of textilereinforced composite materials using a multiscale energetic approach, Composite Structures, pp.38-361, 1988.

D. [. Breen, P. H. House, and . Getto, A physically-based particle model of woven cloth, The Visual Computer, vol.21, issue.4, pp.264-277, 1991.
DOI : 10.1007/BF01897114

B. [. Boubaker, J. F. Haussy, and . Gangho¤er, Un mod??le discret du couplage entre les fils dans une structure tiss??e, modèle discret du couplage entre les ?ls dans une structure tissée, pp.295-302, 2003.
DOI : 10.1016/S1631-0721(03)00070-6

D. [. Breen, M. House, and . Wozny, A Particle-Based Model for Simulating the Draping Behavior of Woven Cloth, Textile Research Journal, vol.64, issue.11, pp.663-685, 1994.
DOI : 10.1177/004051759406401106

D. [. Breen, M. J. House, E. Wozny, and . Paris, Predicting the drape of woven cloth using interacting particules European computer-industry research center, Bil03] J. L. Billoët, Contribution à la compréhension des problèmes en grandes transformations, 1995.

J. Byström, N. Jekabsons, L. Persson, and J. Varna, Using reiterated homogenization for sti¤ ness computation of woven composites, Proceedings of ICCE, vol.5, pp.133-137, 1998.

J. [. Belytschko and . Lin, Explicit algorithms for the nonlinear dynamics of shells, Computer Methods in Applied Mechanics and Engineering, vol.42, issue.2, pp.225-251, 1984.
DOI : 10.1016/0045-7825(84)90026-4

]. J. Boh86 and . Bohler, Application of tensor functions in solid mechanics, Boi97] P. Boisse, Comportement mécanique biaxial des renforts composites tissés, Mécanique Industrielle des Matériaux (GAMI), pp.50-140, 1986.

B. [. Boisse, A. Zouari, and . Gasser, A mesoscopic approach for the simulation of woven fibre composite forming, Composites Science and Technology, vol.65, issue.3-4, pp.429-436, 2005.
DOI : 10.1016/j.compscitech.2004.09.024
URL : https://hal.archives-ouvertes.fr/hal-00020532

J. [. Cherouat and . Billoët, Mechanical and numerical modelling of composite manufacturing processes deep-drawing and laying-up of thin pre-impregnated woven fabrics, Journal of Materials Processing Technology, vol.118, issue.1-3, pp.460-471, 2001.
DOI : 10.1016/S0924-0136(01)00987-6

G. [. Cox and . Flanagan, Handbook of analytical methods for textile composites, 1997.

K. [. Courant, H. Friedrichs, and . Lewy, ???ber die partiellen Differenzengleichungen der mathematischen Physik, Mathematische Annalen, vol.98, issue.6, p.32, 1928.
DOI : 10.1007/BF01448839

]. A. Che01 and . Cheruet, Etude et simulation numérique de la mise en forme des composites minces à matrice thermoplastiques et ?bres longues, 2001.

]. R. Chr79 and . Christensen, Mechanics of composite materials, 1979.

T. [. Chou and . Ishikawa, Mechanics of composite materials, Materials Science and Engineering, vol.48, issue.1, pp.31-37, 1991.
DOI : 10.1016/0025-5416(81)90076-8

]. J. Cin03 and . Cinquin, L'utilisation des composites en aérospatiale, Comptes Rendus, vol.1, 2003.

N. [. Cordier and . Magnenat-thalmann, Real-time animation of dressed virtual humans, Eurographics, vol.21, issue.3, pp.663-685, 2002.

J. Cao, P. Xue, X. Peng, and N. Krishnan, An approach in modeling the temperature e¤ ect in thermo-stamping of woven composites, pp.61-413, 2003.

R. [. Dasgupta, S. M. Agarwal, and . Bhandarkar, Three-dimensional modeling of woven-fabric composites for effective thermo-mechanical and thermal properties, Composites Science and Technology, vol.56, issue.3, pp.209-223, 1996.
DOI : 10.1016/0266-3538(95)00111-5

]. P. Djl-+-96, A. F. Deluca, P. Johnson, . Lefebure, C. Mallon et al., Numerical techniques for the preheating and forming simulation of continuous ?bre thermoplastics, SAMPE Europe Conference and Exhibition, 1996.

]. F. Dum03a and . Dumont, Contribution à l'expérimentaion et à la modélisation du comportement mécanique de renforts de composites tissés, 2003.

]. J. Eis98 and . Eischen, Technical issues, approaches and challenges, Course 31-Cloth and Clothing in Computer Graphics, 25th SIGGRAPH Conference, 1998.

I. [. El-tayeb and . Mostafa, The effect of laminate orientations on friction and wear mechanisms of glass reinforced polyester composite, Wear, vol.195, issue.1-2, pp.186-191, 1996.
DOI : 10.1016/0043-1648(95)06849-X

B. Euram, Industrial press forming of CFRTP sheets and developpement of numerical simulation tools, 1992.

A. [. Grosberg, B. J. Leaf, and . Park, The Mechanical Properties of Woven Fabrics, Textile Research Journal, vol.56, issue.12, pp.1085-1100, 1968.
DOI : 10.1177/004051756803801102

B. [. Grosberg and . Park, The Mechanical Properties of Woven Fabrics, Textile Research Journal, vol.36, issue.5, pp.420-431, 1966.
DOI : 10.1177/004051756603600505

P. [. Griesse and . Taylor, The bending behaviour of fabrics: An energy approach, Mathematics and Computers in Simulation, vol.41, issue.5-6, pp.579-586, 1996.
DOI : 10.1016/0378-4754(95)00102-6

Y. [. Hu and . Chan, Effect of Fabric Mechanical Properties on Drape, Textile Research Journal, vol.59, issue.1, pp.57-64, 1998.
DOI : 10.1177/004051759806800107

M. [. Harrison, A. C. Cli¤ord, and . Long, Shear characterisation of woven textile composites, Proceedings of the 10th European Conference on Composite Materials (ECCM-10) (Bruges), p.280, 2002.

R. [. House, D. E. Devaul, and . Breen, Towards simulating cloth dynamics using interacting particles, International Journal of Clothing Science and Technology, vol.8, issue.3, pp.75-94, 1996.
DOI : 10.1108/09556229610147959
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.29.6344

T. [. Holzapfel and . Gasser, A viscoelastic model for ?ber-reinforced composites at ?nite strains : Continuum basis, computational aspects and applications, Comput. Meth. Appl. Mech. Engng, pp.190-4379, 2002.

P. [. Hearle, S. Grosberg, and . Backer, Structural mechanics of ?bers, yarns, and fabrics, 1969.

K. [. Heisley and . Haller, Fitting woven fabric to surfaces in three dimensions, Journal of Textile Institute, vol.2, pp.250-263, 1988.

N. [. Hsiao and . Kikuchi, Numerical Analysis of Deep Drawing Process for Thermoplastic Composite Laminates, Journal of Engineering Materials and Technology, vol.119, issue.3, pp.314-318, 1997.
DOI : 10.1115/1.2812263

R. [. Haumann and . Parent, The behavioral test-bed: Obtaining complex behavior from simple rules, The Visual Computer, vol.20, issue.4, pp.332-347, 1998.
DOI : 10.1007/BF01908878

M. [. Hutchinson, T. Preston, and . Hewitt, Adaptative re?nements for mass/spring simulations, Eurographics Workshopon Animation and Simulation, pp.31-45, 1996.

F. [. Hofstee and . Van-keulen, Elastic stiffness analysis of a thermo-formed plain-weave fabric composite Part II: analytical models, Composites Science and Technology, vol.60, issue.8, pp.1249-1261, 2000.
DOI : 10.1016/S0266-3538(00)00069-5

F. [. Hofstee and . Van-keulen, 3-d geometric modeling of draped woven fabric, Composite structures, pp.54-179, 2001.

J. [. Hughes and . Winget, Finite rotation effects in numerical integration of rate constitutive equations arising in large-deformation analysis, International Journal for Numerical Methods in Engineering, vol.101, issue.12, pp.1862-1867, 1980.
DOI : 10.1002/nme.1620151210

Y. [. Hu and . Zhang, The KES Shear Test for Fabrics, Textile Research Journal, vol.67, issue.9, pp.654-664, 1997.
DOI : 10.1177/004051759706700904

E. [. Johnson and . Costalas, Forming models for fabric reinforced thermoplastics, ICAC, vol.95, pp.341-352, 1995.

J. [. Jiang, F. Hu, and . Ko, Characterizing and Modeling Bending Properties of Multiaxial Warp Knitted Fabrics, Textile Research Journal, vol.69, issue.9, pp.691-697, 1999.
DOI : 10.1177/004051759906900910

D. [. Jeong and . Phillips, A Study of Fabric-drape Behaviour with Image Analysis. Part II: The Effects of Fabric Structure and Mechanical Properties on Fabric Drape, Journal of the Textile Institute, vol.55, issue.1, pp.70-79, 1998.
DOI : 10.1177/004051759106100501

A. [. Jiang, J. Tabiei, and . Simitses, A novel micromechanics-based approach to the derivation of constitutive equations for local/global analysis of a plain-weave fabric composite, Composites Science and Technology, vol.60, issue.9, pp.1825-1833, 2000.
DOI : 10.1016/S0266-3538(00)00064-6

]. S. Kaw80a and . Kawabata, The standardization and analysis of hand evaluation, 1980.

P. [. Kuhn, Modeling of Plain Weave Fabric Composite Geometry, Journal of Composite Materials, vol.14, issue.9, pp.188-220, 1999.
DOI : 10.1177/002199839903300301

P. [. King, S. Jearanaisilawong, and . Socrate, A continuum constitutive model for the mechanical behavior of woven fabrics, International Journal of Solids and Structures, vol.42, issue.13, pp.3867-3896, 2005.
DOI : 10.1016/j.ijsolstr.2004.10.030

M. [. Kawabata, H. Niwa, and . Kawai, The ?nite deformation theory of plain-weave fabrics, part i, part II and part III, J. Text. Inst, pp.64-85, 1973.

W. [. Kang, K. Yu, and . Chung, Drape Simulation of Woven Fabric by Using the Finite-element Method, Journal of the Textile Institute, vol.86, issue.4, pp.635-648, 1995.
DOI : 10.1080/19447026308659910

T. [. Kato, H. Yoshino, and . Minami, Formulation of constitutive equations for fabric membranes based on the concept of fabric lattice model, Engineering Structures, vol.21, issue.8, pp.691-708, 1999.
DOI : 10.1016/S0141-0296(98)00024-8

]. T. Lah02, E. A. Lahey, and . Lamers, Modelling hysteresis in the bending of fabrics Shape distortion in fabric reinforced composite products due to processing induced ?bre reorientation, Prédiction des contraintes et déformations résiduelles obtenues lors du moulage de formes complexes en composite strati?e, 1991.

. V. Lbb-+-02-]-s, T. Lomov, S. B. Belov, T. Bischo¤, I. Ghosh et al., Carbon composites based on multiaxial multiply stitched preforms. part 1. geometry of the preform, Composites : Part A, vol.33, pp.1171-1183, 2002.

J. [. Liu, X. Chen, J. S. Li, G. R. Lahey, and . Heppler, Two-dimensional macro-mechanics shear models of woven fabrics, Composites Part A: Applied Science and Manufacturing, vol.36, issue.1, pp.105-114, 2004.
DOI : 10.1016/S1359-835X(04)00185-X

C. [. Long and . Rudd, A simulation of reinforcement deformation during the production of preforms for liquid moulding processes, ARCHIVE: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 1989-1996 (vols 203-210), vol.208, issue.42, pp.269-278, 1994.
DOI : 10.1243/PIME_PROC_1994_208_088_02

[. Lim and S. Ramakrishna, Modelling of composite sheet forming: a review, Composites Part A: Applied Science and Manufacturing, vol.33, issue.4, pp.515-537, 2002.
DOI : 10.1016/S1359-835X(01)00138-5

N. [. Lusson and . Vendeuvre, Simulation numérique de la mise en forme de composites minces, 2004.

S. V. Lomov, I. Verpoest, M. Barburski, and J. Laperre, Carbon composites based on multiaxial multiply stitched preforms. Part 2. KES-F characterisation of the deformability of the preforms at low loads, Composites Part A: Applied Science and Manufacturing, vol.34, issue.4, pp.359-370, 2003.
DOI : 10.1016/S1359-835X(03)00025-3

C. [. Mcguiness and . Bradaigh, Development of rheological models for forming flows and picture-frame shear testing of fabric reinforced thermoplastic sheets, Journal of Non-Newtonian Fluid Mechanics, vol.73, issue.1-2, pp.1-28, 1997.
DOI : 10.1016/S0377-0257(97)00040-2

J. [. Mcbride and . Chen, Charactériasation of thermomplastic composite melts in rhombusshear : the picture-frame experiment Unit cell geometry in plain weave fabrics during shear deformations, Composites Part A Composites Science and Technology, vol.29, issue.51, pp.115-132, 1997.

J. [. Mcbride, L. Chen, and . Lam, E¤ ects of forming induced evolution of microstructure in plain-weave composites, 12th Technical Conference, pp.1063-1072, 1997.

J. [. Magno and . Gangho¤er, Un mod??le m??soscopique en grandes perturbations de mat??riaux textiles ??? Application ?? l'armure toile, Comptes Rendus de l'Acad??mie des Sciences - Series IIB - Mechanics, vol.329, issue.2
DOI : 10.1016/S1620-7742(00)01297-6

]. P. Min95 and . Minazio, Fabric assurance by simple testing, International Journal of Clothing Science and Technology, vol.7, pp.43-48, 1995.

U. Mohammed, C. Lekakou, L. Dong, and M. G. Bader, Shear deformation and micromechanics of woven fabrics, Composites Part A: Applied Science and Manufacturing, vol.31, issue.4, pp.299-308, 2000.
DOI : 10.1016/S1359-835X(99)00081-0

P. [. Murtagh and . Mallon, Shear characterisation of unidirectionnel and fabric reinforced thermoplastic composites for pressformong applications, 10th ICCM Conference (Canada), pp.373-380, 1995.

C. [. Mcentee, Large deformation finite element modelling of single-curvature composite sheet forming with tool contact, Composites Part A: Applied Science and Manufacturing, vol.29, issue.1-2, pp.207-213, 1998.
DOI : 10.1016/S1359-835X(97)00075-4

. [. Murtagh, M. R. Monaghan, P. J. Mallon, T. G. Mulhern, A. J. Rogers et al., Investigation of the interply slip process in continuous ?bre thermoplastic composites, ICCM9 (Madrid) A continuum theory of a plastic-elastic ?bre-reinforced material, International Journal of Engineering Science, vol.7, pp.129-152, 1969.

C. [. Morris and . Sun, An investigation of interply slip behaviour in AS4/PEEK at forming temperatures, Composites Manufacturing, vol.5, issue.4, pp.217-224, 1994.
DOI : 10.1016/0956-7143(94)90136-8

H. [. Mack and . Taylor, 39???The Fitting of Woven Cloth to Surfaces, Journal of the Textile Institute Transactions, vol.47, issue.9, pp.477-487, 1956.
DOI : 10.1080/19447027.1956.10750433

]. R. Nai94, M. Naik, I. Nguyen, R. Herszberg, and . Paton, Analysis of woven and braided fabric reinforced composites, Tech. Report NASA CR-194930, National Aeronautics and Space Administration The shear properties of woven carbon fabric, Composite Structures, pp.47-767, 1994.

M. [. Ning and . Lovell, On the Sliding Friction Characteristics of Unidirectional Continuous FRP Composites, Journal of Tribology, vol.124, issue.1, pp.5-13, 2002.
DOI : 10.1115/1.1398295

]. N. Ns92a, P. Naik, and . Shembekar, Elastic behaviour of woven fabric composites : I-laminate analysis Elastic behaviour of woven fabric composites : II-laminate analysis A viscous shell formulation for the analysis of thin sheet metal forming, Journal of Composite Materials Journal of Composite Materials Int. J. Mech. Sci, vol.26, issue.26, pp.2196-2225, 1983.

J. [. Prodromou and . Chen, On the relationship between shear angle and wrinkling of textile composite preforms, Composites Part A: Applied Science and Manufacturing, vol.28, issue.5, pp.491-503, 1997.
DOI : 10.1016/S1359-835X(96)00150-9

J. [. Peng and . Cao, A continuum mechanics-based non-orthogonal constitutive model for woven composite fabrics, Composites Part A: Applied Science and Manufacturing, vol.36, issue.6, pp.859-874, 2005.
DOI : 10.1016/j.compositesa.2004.08.008

. Q. Pcc-+-04-]-x, J. Peng, J. Cao, P. Chen, D. S. Xue et al., Experimental and numerical analysis on normalization of picture frame tests for composite materials, Composites Science and Technology, vol.64, pp.11-21, 2004.

]. F. Pei30 and . Peirce, The handle of cloth as a measurable quantity, J. Tex. Inst. T, vol.377, issue.21, 1930.

]. F. Pei37 and . Peirce, The geometry of cloth structure, Journal of the Textile Institute, vol.28, p.45, 1937.

]. K. Pot79 and . Potter, The in ?uence of accurate stretch data for reinforcements on the production of complex structural mouldings. part i. deformation of aligned sheets and fabrics, Composites, pp.161-173, 1979.

T. [. Pickett, P. Queckbörner, E. Deluca, and . Haug, An explicit finite element solution for the forming prediction of continuous fibre-reinforced thermoplastic sheets, Composites Manufacturing, vol.6, issue.3-4, pp.237-243, 1995.
DOI : 10.1016/0956-7143(95)95016-R

T. [. Picket, P. Queckborner, E. De-luca, and . Hang, An explicit finite element solution for the forming prediction of continuous fibre-reinforced thermoplastic sheets, Composites Manufacturing, vol.6, issue.3-4, pp.237-243, 1992.
DOI : 10.1016/0956-7143(95)95016-R

]. X. Pro95 and . Provot, Deformation constraint in a mass-spring model to describe rigid cloth behaviour, Proceedings of Graphics Interface, pp.147-154, 1995.

J. [. Page and . Wang, Prediction of shear force and an analysis of yarn slippage for a plain-weave carbon fabric in a bias extension state, Composites Science and Technology, vol.60, issue.7, pp.977-986, 2000.
DOI : 10.1016/S0266-3538(99)00198-0

. Q. Pxc-+-02-]-x, P. Peng, J. Xue, D. S. Cao, and C. J. Lussier, Normalization in the picture frame test of woven composites : Length or area ?, Proceedings of the Fifth International ESAFORM Conference on Materials Forming, pp.13-17, 2002.

T. [. Qiu and . Pence, Remarks on the behaviour of simple directionally reinforced incompressible non-linearly elastic solids, Journal of Elasticity, vol.49, issue.1, pp.1-30, 1997.
DOI : 10.1023/A:1007410321319

P. [. Rozant, J. A. Bourbon, and . Manson, Drapability of dry textile fabrics for stampable thermoplastic preforms, Composites Part A: Applied Science and Manufacturing, vol.31, issue.11, pp.1167-1177, 2000.
DOI : 10.1016/S1359-835X(00)00100-7

]. J. [-red04 and . Reddy, Mechanics of laminated composite plates and shells : Theory and analysis, 2004.

]. W. Ree83 and . Reeves, Particule systems -a technique for modelling a class of fuzzy objects, ACM transactions on graphics, vol.2, pp.91-108, 1983.

Z. [. Rosen and . Hashin, E¤ ective thermal expansion coe¢ cients and speci?c heats of composite materials, Journal of Composite Materials, vol.8, pp.157-173, 1970.

E. [. Robertson, E. N. Hsiue, G. S. Sickafus, and . Yeh, Fiber rearrengements during the moulding of continuous ?ber composites : Part 1. ?at cloth to a hemisphere, pp.126-131, 1981.

E. [. Robertson, G. Hsiue, and . Yeh, Continuous fiber rearrangements during the molding of fiber composites. II. Flat cloth to a rounded cone, Polymer Composites, vol.10, issue.3, pp.191-197, 1984.
DOI : 10.1002/pc.750050306

]. T. Rog89 and . Rogers, Rheological characterisation of anisotropic materials, Composites, vol.20, pp.21-27, 1989.

]. P. Rou97 and . Rougée, Mécanique des grandes transformations [Rud90] I. J. Rudomin, Simulating cloth using a mixed geometricphysical method, 1990.

S. [. Shuler and . Advani, Transverse squeeze ?ow of concentrated and aligned ?bres en viscous ?uids, Journal of Non-Newtonien Fluid Mechanics, 1996.

R. [. Sidhu, M. Averill, F. Riaz, and . Pourboghrat, Finite element analysis of textile composite preform stamping, Composite structures, pp.52-483, 2001.

J. [. Simon and . Demeulemeester, Mise au point d'un banc d'essai et d'un protocole de mesure pour la mise en forme des composites minces, 2002.

]. J. Ske76 and . Skelton, Fundamentals of fabric shear, Textile Research Journal, pp.862-829, 1976.

R. [. Sankar and . Marrey, Analytical method for micromechanics of textile composites, Composites Science and Technology, vol.57, issue.6, pp.703-713, 1997.
DOI : 10.1016/S0266-3538(97)00030-4

R. [. Smiley and . Pipes, Analysis of the Diaphragm Forming of Continuous Fiber Reinforced Thermoplastics, Journal of Thermoplastic Composite Materials, vol.1, issue.4, pp.298-321, 1988.
DOI : 10.1177/089270578800100401

N. [. Sun and . Pan, Shear deformation analysis for woven fabrics, Composite Structures, vol.67, issue.3, pp.317-322, 2005.
DOI : 10.1016/j.compstruct.2004.01.013

]. A. Spe72 and . Spencer, Deformation of ?ber-reinforced materials, 1972.

]. A. Spe84 and . Spencer, Continuum theory the mechanics of ?bre-reinforced composites , CISM Courses and lectures, 1984.

]. A. Spe00 and . Spencer, Theory of fabric-reinforced viscous ?uid, Composites Part A, vol.31, pp.1311-1321, 2000.

]. A. Spe01 and . Spencer, A theory of viscoplasticity for fabric-reinforced composites, Journal of the Mechanics and Physics of Solids, vol.49, pp.2667-2687, 2001.

P. [. Sagar, J. W. Potluri, and . Hearle, Mesoscale modelling of interlaced ?bre assemblies using energy method The e¤ ect of shear deformation on the processing and mechanical properties of aligned reinforcements, Computational Materials Science Composites Science and Technology, vol.57, pp.327-330, 1997.

A. [. Smith and . Spencer, A CONTINUUM THEORY OF A PLASTIC-RIGID SOLID REINFORCED BY TWO FAMILIES OF INEXTENSIBLE FIBRES, The Quarterly Journal of Mechanics and Applied Mathematics, vol.23, issue.4, pp.489-504, 1970.
DOI : 10.1093/qjmam/23.4.489

V. [. Shang and . Suong, Three Dimensional Micro-Mechanical Modeling of Woven Fabric Composites, Journal of Composite Materials, vol.35, issue.19, pp.1701-1729, 2001.
DOI : 10.1177/002199801772661506

M. [. Sharma and . Sutcli¤e, A simplified finite element model for draping of woven material, Composites Part A: Applied Science and Manufacturing, vol.35, issue.6, pp.637-643, 2004.
DOI : 10.1016/j.compositesa.2004.02.013

M. [. Sharma, S. H. Sutcli¤e, and . Chang, Characterisation of material properties for draping of dry woven composite material, Composites Part A: Applied Science and Manufacturing, vol.34, issue.12, pp.1167-1175, 2003.
DOI : 10.1016/j.compositesa.2003.09.001

M. [. Sharma, M. J. Sutcli¤e, A. C. Cli¤ord, and . Long, Experimental investigation of tow deformation during draping of woven fabrics, Proceedings of the Fourth International ESAFORM Conference on Materials Forming) (Habraken AM, 2001.

S. [. Zako, T. C. Sakata, S. Lim, and . Ramakrishna, Geometrical nonlinearity of textile composites in large deformation, Adv Compos Lett, vol.16, pp.257-266, 2000.

J. [. Srirengan, C. Whitcomb, and . Chapman, Modal technique for three-dimensional global/ local stress analysis of plain weave composites, Composite Structures, vol.39, issue.1-2, pp.145-156, 1997.
DOI : 10.1016/S0263-8223(97)00134-7

M. [. Tanov and . Brueggert, Finite element modeling of non-orthogonal loosely woven fabrics in advanced occupant restraint systems, Finite Elements in Analysis and Design, vol.39, issue.5-6, pp.357-367, 2003.
DOI : 10.1016/S0168-874X(02)00078-1

]. P. Tch78 and . Tchebychev, Congr 'es de Paris, 154-155, also available as¸STheas¸ as¸SThe Cutting out of Clothes, µ T Uspekhi matematicheskikh nauk, pp.38-42, 1878.

K. [. Terzopoulos, D. Fleischer, and . Models, Deformable models, The Visual Computer, vol.2, issue.6, pp.306-331, 1988.
DOI : 10.1007/BF01908877

T. [. Tam and . Gutowski, Ply-Slip During the Forming of Thermoplastic Composite Parts, Journal of Composite Materials, vol.23, issue.6, pp.587-600, 1989.
DOI : 10.1177/002199838902300604

A. [. Trochu, Y. Hammami, and . Benoit, Prediction of fibre orientation and net shape definition of complex composite parts, Composites Part A: Applied Science and Manufacturing, vol.27, issue.4, pp.319-328, 1996.
DOI : 10.1016/1359-835X(95)00054-6

D. [. Thevenin and . Perreux, The use of homogenization methods for estimating anisotropic viscosities of composite melts, Composites Science and Technology, vol.56, issue.5, pp.595-603, 1996.
DOI : 10.1016/0266-3538(96)00046-2

A. [. Tanov and . Tabiei, Computationally e¢ cient micro-mechanical woven fabric constitutive, J. Models. Appl. Mech, vol.60, pp.553-560, 2001.

Y. [. Takano, Y. Uetsuji, M. Kahiwagi, and . Zako, Hierarchical modeling of textile composite materials and structures by the homogenization method Comparative study of predictive methods for woven fabric composite elastic properties, Mater. Sci. Engng. Composite Structures, vol.7, pp.207-231, 1999.

]. J. Vil02, P. Villard, and J. Vandeurzen, Simulation numérique de tissus à l'aide de maillages adaptatifs Ivens, and I. Verpoest, Micro-stress analysis of woven fabric composites by multilevel decomposition, Journal of Composite Materials, vol.32, pp.623-51, 1998.

B. [. Vu-khanh and . Liu, Prediction of fibre rearrangement and thermal expansion behaviour of deformed woven-fabric laminates, Composites Science and Technology, vol.53, issue.2, pp.183-191, 1995.
DOI : 10.1016/0266-3538(95)00017-8

B. P. Van-west, M. Keefe, and R. B. Pipes, The draping of bidirectionnel fabric on three dimensional sufraces, Proceedings of the American Society of Composites. Fourth Technical Conference, pp.463-472, 1989.

]. W. War92 and . Warren, The large deformation elastic response of woven kevlar fabric, Polymer Composites, vol.13, pp.278-284, 1992.

I. [. Wang, J. T. Daniel, and . Gotro, Thermoviscoelastic Analysis of Residual Stresses and Warpage in Composite Laminates, Journal of Composite Materials, vol.11, issue.8, pp.883-899, 1992.
DOI : 10.1177/002199839202600606

]. F. Wee91 and . Weeën, Algorithms for draping fabric on doubly-curved surfaces, International Journal For numerical Methods in Engineering, vol.31, pp.1415-1426, 1991.

]. J. Wei86 and . Weil, The synthesis of cloth objects, Computer Graphics, vol.20, pp.359-376, 1986.

K. [. Witkin, A. Fleischer, and . Barr, Energy constraints on parameterized models, ACM SIGGRAPH Computer Graphics, vol.21, issue.4, pp.225-232, 1987.
DOI : 10.1145/37402.37429

R. [. Whitney, H. W. Mccullough, L. J. Wiersma, R. Peeters, and . Akkerman, Micromechanical material modeling Prediction of springforward in continuous-?bre/polymer l-shaped parts, of delaware composites and design encyclopaedia, pp.29-1333, 1990.

R. [. Wang, R. Paton, and . Page, The draping of woven fabric preforms and prepregs for production of polymer composite components, Composites Part A: Applied Science and Manufacturing, vol.30, issue.6, pp.757-765, 1999.
DOI : 10.1016/S1359-835X(98)00187-0

K. [. Whitcomb, C. Srirengan, and . Chapman, Evaluation of homogenization for global/local stress analysis of textile composites, Composite Structures, vol.31, issue.2, pp.137-186, 1995.
DOI : 10.1016/0263-8223(95)00011-9

X. [. Xue, J. Peng, and . Cao, A non-orthogonal constitutive model for characterizing woven composites, Composites Part A: Applied Science and Manufacturing, vol.34, issue.2, pp.183-193, 2003.
DOI : 10.1016/S1359-835X(02)00052-0

. [. Yu, . Ph, A. Harrison, and . Long, Finite element forming simulation for non-crimp fabrics using a non-orthogonal constitutive equation, Composites Part A: Applied Science and Manufacturing, vol.36, issue.8, pp.1079-1093, 2005.
DOI : 10.1016/j.compositesa.2005.01.007

W. R. Yu, F. Pourboghrat, K. Chung, M. Zampaloni, and T. J. Kang, Non-orthogonal constitutive equation for woven fabric reinforced thermoplastic composites, Composites Part A: Applied Science and Manufacturing, vol.33, issue.8, pp.1095-1105, 2002.
DOI : 10.1016/S1359-835X(02)00053-2

L. [. Yu, Z. Y. Zhang, and . Mai, Modelling and finite element treatment of intra-ply shearing of woven fabric, Journal of Materials Processing Technology, vol.138, issue.1-3, pp.47-52, 2003.
DOI : 10.1016/S0924-0136(03)00047-5

]. W. Yu, M. Zampaloni, F. Pourboghrat, K. Chung, and T. J. Kang, Sheet hydroforming of woven FRT composites: non-orthogonal constitutive equation considering shear stiffness and undulation of woven structure, Composite Structures, vol.61, issue.4, pp.61-353, 2003.
DOI : 10.1016/S0263-8223(03)00056-4

Y. [. Zhang and . Fu, A micromechanical model of woven fabric and its application to the analysis of buckling under uniaxial tension, International Journal of Engineering Science, vol.38, issue.17, pp.1895-1906, 2000.
DOI : 10.1016/S0020-7225(00)00012-4

J. [. Zhang and . Harding, A numerical micromechanics analysis of the mechanical properties of a plain weave composite, Computers & Structures, vol.36, issue.5, pp.36-839, 1990.
DOI : 10.1016/0045-7949(90)90154-T

Y. [. Zhang, C. Y. Hao, and . Li, Incremental micro-mechanical model of plainwoven fabric, Acta Mechanica Solida Sinica, vol.17, pp.131-139, 2004.

M. [. Zhang and . Yuen, Cloth simulation using multilevel meshes, Computers & Graphics, vol.25, issue.3, pp.383-389, 2001.
DOI : 10.1016/S0097-8493(01)00062-0