S. Ahmaniemi, P. Vuorito, S. Ahmaniemi, P. Vuoristo, and T. , MANTYLA, «Improved sealing treatments for thick thermal barrier coatings», Surface and Coatings Technology, pp.151-152, 2002.

F. Andreola, C. Leonelli, M. Romagnoli, and P. Miselli, An Advanced 3D Visualisation and Volume Modeling System, The American Ceramic Society Bulletin, issue.7, pp.79-128, 1997.

S. A. Ansar, G. G. Antou, G. Antou, F. Montavon, A. Hlawka et al., MONTAVON, «Quantifying thermal spray coating architecture by stereological protocols: part II. Key points to be addressed» CODDET, «Exploring thermal spray grey alumina coating pore network architecture by combining stereological protocols and impedance electrochemical spectroscopy», Proceeding of the 2006 Internationnal Thermal Spray Conference Thèse de doctorat, pp.168-176, 2004.

Y. Bao, D. T. Gawne, T. Zhang, Z. Qiu, and K. Zhang, Influence of secondary phase on residual stress of plasma sprayed glass coatings, Surface Engineering, vol.76, issue.6, pp.473-479, 2000.
DOI : 10.1364/JOSA.11.000233

S. P. Beauvais, C. Boch, F. Gault, and . Platon, «Etude de l'influence de la porosité sur les propriétés électriques de dépôts réalisés par projection plasma», Proceedings of the 5th International Meeting on Modern Ceramics Technologies, 1982.

G. Bolelli, V. Cannillo, L. Lusvarghi, and T. , Glass-alumina composite coatings by plasma spraying. Part I: Microstructural and mechanical characterization, Surface and Coatings Technology, vol.201, issue.1-2, pp.458-473, 2006.
DOI : 10.1016/j.surfcoat.2005.10.039

G. Bolelli, V. Cannillo, L. Lusvarghi, T. Manfredini, and M. Montorsi, Glass???alumina composite coatings by plasma spraying. Part II: Microstructure-based modeling of mechanical properties, Surface and Coatings Technology, vol.201, issue.1-2, pp.474-486, 2006.
DOI : 10.1016/j.surfcoat.2005.10.038

J. W. Byeon, B. Jayaraj, S. Wishweswaraiah, S. Rhee, V. H. Desai et al., Non-destructive evaluation of degradation in multi-layered thermal barrier coatings by electrochemical impedance spectroscopy, CAR 91] H. CARREROT, «Etude du comportement mécanique de dépôts céramiques projetés par plasma pour application orthopédiques» Thèse de doctorat, Ecole Nationale Supérieure des Mines de Saint Etienne, pp.213-225, 1935.
DOI : 10.1016/j.msea.2005.07.004

]. D. Christoulis, D. I. Pantelis, F. Borit, V. Guipont, and M. , Effect of substrate preparation on flattening of plasma sprayed aluminium bronze powders, Surface Engineering, vol.22, issue.6, pp.420-431, 2006.
DOI : 10.1016/j.surfcoat.2005.02.156
URL : https://hal.archives-ouvertes.fr/hal-00136816

C. C. Montavon-g and . S. Ayrault-costil, «Surface preparation and thermal spray in a single step: the PROTAL process, example of application for an aluminum-base substrate», COT 99] R. COTTIS, S. TURGOOSE, «Electrochemical impedance and noise», pp.235-242, 1999.

P. Ctibor, K. Neufuss, F. Zahalka, B. P. Ctibor, R. Lechnerova et al., KOLMAN, «Plasma sprayed ceramic coatings without and with epoxy resin sealing treatment and their wear resistance» «Quantitative analysis of pores of two types in a plasmasprayed coating», Wear Materials Characterization, vol.262, issue.56, pp.1274-1280, 2006.

. J. Dam-00-]-r and P. Damani, MAKROCZY, «Heat treatment induced phase and microstructural development in bulk plasma sprayed alumina», DAVIS, «Handbook of thermal spray technology», pp.867-888, 2000.

S. Deshpande, A. Kulkarni, S. Sampath, and H. Herman, Application of image analysis for characterization of porosity in thermal spray coatings and correlation with small angle neutron scattering, Surface and Coatings Technology, vol.187, issue.1, pp.6-16, 2004.
DOI : 10.1016/j.surfcoat.2004.01.032

H. Du, J. Heyg, S. Wohn, and . Lee, Study on Porosity of Plasma-Sprayed Coatings by Digital Image Analysis Method, Journal of Thermal Spray Technology, vol.14, issue.4, pp.453-461, 2005.
DOI : 10.1361/105996305X76450

L. Dubourg, R. S. Lima, C. S. Dyshlovenkoa, L. Pawlowski, B. Pateyron et al., MOREAU, «Properties of alumina-titania coatings prepared by laserassisted air plasma spraying», Surface & Coatings Technology, DUBOIS, «Propriétés diélectriques des polymères» «Modelling of plasma particle interactions and coating growth for plasma spraying of hydroxyapatite», Surface & Coating Technology, pp.6278-6284, 2006.

S. Faure, «Etude de l'interaction rayonnement-matière dans un milieu granulaire en cue de l'application au procédé de frittage laser», Thèse de doctorat, pp.44-66, 2001.

J. P. Fauchais and B. Coudert, La production des plasmas thermiques, Revue G??n??rale de Thermique, vol.35, issue.416, pp.543-560, 1996.
DOI : 10.1016/S0035-3159(99)80081-6

A. Fontes, M. Jeandin, O. Uteza, M. Sentis, M. S. Frainais et al., Excimer Laser Processing of Nodular Iron, Materials and Manufacturing Processes, vol.39, issue.3, pp.415-439, 1994.
DOI : 10.1080/10426919008953275
URL : https://hal.archives-ouvertes.fr/hal-00195528

D. T. Gawne, Z. Qiu, T. Zhang, Y. Bao, and K. Zhang, Abrasive Wear Resistance of Plasma-Sprayed Glass-Composite Coatings, Proceeding of the 2000 Internationnal Thermal Spray Conference, pp.977-981, 2000.
DOI : 10.1361/105996301770349114

P. M. Garland and . Heckbert, Surface simplification using quadric error metrics, Proceedings of the 24th annual conference on Computer graphics and interactive techniques , SIGGRAPH '97, pp.209-216, 1997.
DOI : 10.1145/258734.258849

. J. Gar-95-]-e, A. R. Garboczi, and . Day, «An algorithm for computing the effective linear elastic properties of heterogeneous materials: three-dimensional results for composites with equal phase Poisson ratios», Journal of the Mechanics and Physics of Solids, vol.43, pp.1349-1362, 1995.

A. G. Gravanis, T. Tsetsekou, C. Zambetakis, and . Stournaras, Ceramic coatings and laser treatment, «Ceramics coatings and laser treatment», pp.245-253, 1991.
DOI : 10.1016/0257-8972(91)90230-T

S. Guessasma, G. Montavon, and C. , Effect of Injection Parameters on Velocity and Temperature Distributions of Alumina-Titania In-Flight Particles in Atmospheric Plasma Spraying, Advanced Engineering Materials, vol.6, issue.8, pp.689-693, 2004.
DOI : 10.1002/adem.200300584

]. T. Haure, A. Denoirjean, P. Tristant, J. Desmaison, P. Fauchais et al., porosity of plasma sprayed alumina coatings: evaluation and modification», Proceeding of the 2003 Internationnal Thermal Spray Conference, 2003.

]. F. El, H. , S. Forest, A. F. Gourgues, and D. , JEULIN, «Représentative volume element sizes for copper bulk polycrystals and thin layers», Colloque 3M Matériaux, pp.141-153, 2007.

G. J. Ilavsky, A. J. Long, C. C. Allen, and . Berndt, «Mercury intrusion porosimetry of plasmasprayed ceramic», Journal of Materials Science, vol.32, issue.15, pp.3925-3932, 1997.
DOI : 10.1023/A:1018612815364

A. J. Ilavsky, L. Allen, M. Lebalanc, C. Prystay, . D. Moreau-a et al., Anisotropic Microstructure of Plasma-Sprayed Deposits, «Low-thermal conductivity plasma-sprayed thermal barrier coatings with engineered microstructures», pp.414-420, 1999.
DOI : 10.1361/105996399770350368

]. B. Jayaraj, S. Wishweswaraiah, V. H. Desai, and Y. H. , SOHN, «Electrochemical impedance spectroscopy of thermal barrier coatings as a function of isothermal and cyclic thermal exposure», Surface & Coatings Technology, pp.177-178, 2004.

C. J. Kathikeyan, A. Berndt, H. Ristorucci, and . Herman, «Ceramic impregnation of plasma sprayed thermal barrier coating», Thermal Spray : Practical Solutions for Engineering Problems, KED 94] M. KEDMAN, «Principes et applications des techniques électrochimiques en corrosion», Matériaux & Techniques, pp.477-482, 1994.

T. Kiefdrowski, E. Willenborg, K. Wisenbach, and S. , HACK, «Generation of design structures by selective polishing of metals with laser radiation», Proceedings of the Third International WLT- Conference on lasers in Manufacturing, pp.451-455, 2005.

]. H. Kim, C. H. Lee, and Y. G. , The effects of sealing on the mechanical properties of the plasma-sprayed alumina-titania coating, Surface and Coatings Technology, vol.139, issue.1, pp.75-80, 2001.
DOI : 10.1016/S0257-8972(00)01132-4

]. H. Kim, S. Odoul, C. H. Lee, and Y. G. Kweon, The electrical insulation behavior and sealing effects of plasma-sprayed alumina???titania coatings, Surface and Coatings Technology, vol.140, issue.3, pp.293-301, 2001.
DOI : 10.1016/S0257-8972(01)01044-1

P. J. Knuutila and T. Sorsa, Sealing of thermal spray coatings by impregnation, Journal of Thermal Spray Technology, vol.4, issue.1, pp.249-257, 1999.
DOI : 10.1007/s11666-999-0002-2

Y. Kobayashi, E. Ohmura, and S. , UEKI, «Effects of laser irradiation on plasma sprayed Al2O3 coatings», Proceeding of the 2007 International Thermal Spray Conference, pp.1035-1040, 2007.

Y. Kobayashi, T. Ishizaka, and Y. , Preparation of alumina films by the sol-gel method, Journal of Materials Science, vol.106, issue.57, pp.263-283, 2005.
DOI : 10.1007/s10853-005-6080-8

P. J. Knuuttila and T. Sorsa, Sealing of thermal spray coatings by impregnation, Journal of Thermal Spray Technology, vol.4, issue.1, pp.249-257, 1999.
DOI : 10.1007/s11666-999-0002-2

V. V. Kudinov, P. Y. Pekshev, V. A. Safiullin, A. Kulkarni, H. Golland et al., «Advanced microstructural characterization of plasma-sprayed zirconia coatings over extended length scales», «Forminf of the structure of Plasma Sprayed Materials», High Temp. Dust. Laden Jets, (éd.) Solonenko et Fedorchenko, pp.381-418, 1989.

A. Kulkarni, A. Vaidya, A. Goland, S. Sampath, and H. Herman, Processing effects on porosity-property correlations in plasma sprayed yttria-stabilized zirconia coatings, Materials Science and Engineering: A, vol.359, issue.1-2, pp.100-111, 2003.
DOI : 10.1016/S0921-5093(03)00342-3

E. Kumpulainen, M. Vippola, P. Vuoristo, P. Sorsa, and T. , MANTYLA, «Characteristics of phosphoric acid sealed ceramic oxide coatings», Thermal Spray : Practical Solutions for Engineering Problems, pp.489-491, 1996.

S. A. Langer, E. R. Fuller, and W. C. Carter, «OOF: An image-based finite-element analysis of material microstructures» Computing in Science & Engineering, «Determination of the absorption length of CO2 and high power diode laser radiation for a high volume alumina-based refractory material», LEE 98] P. W. LEE, «Handbook of powder metal technologies and application», pp.71-74, 1998.

D. Leguillon, Strength or toughness? A criterion for crack onset at a notch, European Journal of Mechanics - A/Solids, vol.21, issue.1, pp.61-72, 2002.
DOI : 10.1016/S0997-7538(01)01184-6

S. H. Leigh and C. C. Berndt, Quantitative Evaluation of Void Distributions within a Plasma-Sprayed Ceramic, Journal of the American Ceramic Society, vol.80, issue.3, pp.17-21, 1999.
DOI : 10.1111/j.1151-2916.1999.tb01717.x

S. H. Leigh and C. C. Berndt, Modelling of elastic constants of plasma spray deposits with ellipsoid-shaped voids, Acta Materialia, vol.47, issue.5, pp.1575-1586, 1999.
DOI : 10.1016/S1359-6454(99)00019-1

[. Li and A. , Relationships Between the Microstructure and Properties of Thermally Sprayed Deposits, Journal of Thermal Spray Technology, vol.11, issue.3, pp.365-374, 2002.
DOI : 10.1361/105996302770348754

. J. Li-97-]-c, A. Li, R. N. Ohmori, T. Lippmann, S. Steinkopff et al., MCPHERON, «The relationship between microstructure and Young's Modulus of thermally sprayed ceramic coatings» «3d-finite-elementmodelling of microstructures with the method of multiphase elements», J. Mater. Sci. Computational Materials Science, vol.9, pp.997-1004, 1997.

S. Liscano, L. Gil, and M. H. , STAIA, «Effect of sealing treatment on the corrosion resistance of thermal-sprayed ceramic coatings», Surface & Coatings Technology, pp.188-189, 2004.

C. Liu, Q. Bi, A. Leyland, and A. Matthews, «An electrochemical impedance spectroscopy study of the corrosion behaviour of PVD coated steels in 0,5 N NaCl aqueous solution : Part I

V. Lopez, M. L. Escudero, and J. M. Bello, LIU, «Crack-free surface sealing of plasma sprayed ceramic coating using an excimer laser» «Laser melting of plasma-sprayed alumina coatings», Applied Surface Science Materials Science Engineering A, vol.186, issue.172, pp.135-139, 1993.

W. E. Lorensen and H. E. Cline, «Marching cubes : high resolution 3-D surface reconstruction algorithm», Proceedings of the 14th annual conference on Computer graphics and interactive techniques, pp.163-169, 1987.

K. Madi, «Influence de la morphologie tridimensionnelle des phases sur le comportement mécanique de réfractaires électrofondus», Thèse de doctorat, 2006.

]. P. Mic-06, C. Michlik, and . Berndt, «Image-based extended finite element modelling of thermal barrier coatings», pp.2369-2380, 2006.

G. Montavon and G. , Quantifying Thermal Spray Coating Architecture by Stereological Protocols: Part I. A Historical Perspective, Journal of Thermal Spray Technology, vol.112, issue.2, pp.6-14, 2007.
DOI : 10.1007/s11666-007-9017-8
URL : https://hal.archives-ouvertes.fr/hal-00176362

G. Montavon, C. Coddet, C. C. Berndt, and S. H. Leigh, Microstructural Index to Quantify Thermal Spray Deposit Microstructures Using Image Analysis, Journal of Thermal Spray Technology, vol.7, issue.2, pp.229-241, 1998.
DOI : 10.1361/105996398770350972

M. Moreaud, «Propriétés morphologiques multi-échelles et prédiction du comportement diélectrique de nanocomposites», Thèse de doctorat, 2006.

T. Nakamura, G. Qian, and C. C. Berndt, Effects of Pores on Mechanical Properties of Plasma-Sprayed Ceramic Coatings, Journal of the American Ceramic Society, vol.80, issue.1, pp.578-584, 2000.
DOI : 10.1111/j.1151-2916.2000.tb01236.x

]. K. Neufuss, P. Chráska, B. Kolman, S. Sampath, and Z. , Properties of plasma-sprayed freestanding ceramic parts, Journal of Thermal Spray Technology, vol.l, issue.4, pp.434-438, 1997.
DOI : 10.1007/s11666-997-0027-3

A. Ohmori, Z. Zhou, K. Inoue, K. Murakami, and T. Sasaki, Penetration treatment of plasma-sprayed ZrO2 coating by liquid Mn alloys, Journal of Thermal Spray Technology, vol.7, issue.2, pp.134-138, 1996.
DOI : 10.1007/BF02646426

C. A. Ohmori and . Li, Quantitative characterization of the structure of plasma-sprayed Al2O3 coating by using copper electroplating, Thin Solid Films, vol.201, issue.2, pp.241-252, 1991.
DOI : 10.1016/0040-6090(91)90114-D

R. V. Oliveira, O. Vilar, and . Conde, Excimer laser ablation of Al2O3???TiC ceramics: laser induced modifications of surface topography and structure, Applied Surface Science, vol.127, issue.129, pp.127-129, 1998.
DOI : 10.1016/S0169-4332(97)00751-4

W. C. Olivier and G. M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, Journal of Materials Research, vol.XI, issue.06, pp.1564-1583, 1992.
DOI : 10.1557/JMR.1992.0613

R. Saenger, D. Martin, and C. Gabrielli, Electrochemical characterization of plasma sprayed WC???Co coatings by impedance techniques, SAD 98] B. SADRAS, «Traitement de surface du polyether-ether cétone (PEEK) par un laser excimère, pp.335-343, 2005.
DOI : 10.1016/j.surfcoat.2004.08.187

D. Sciti, C. Melandri, and A. Bellosi, «Excimer laser induced microstructural changes of alumina and silicon carbide», Journal of Materials Science, vol.35, issue.15, pp.3799-3810, 2000.
DOI : 10.1023/A:1004821112148

I. Sevostianov, M. Kachanov, J. Ruud, P. Lorraine, and M. Dubois, Quantitative characterization of microstructures of plasma-sprayed coatings and their conductive and elastic properties, Materials Science and Engineering A, vol.386, issue.1-2, pp.164-174, 2004.
DOI : 10.1016/S0921-5093(04)00924-4

F. Siska, S. Forest, P. R. Gumbsch, B. L. Sivakumar, K. W. Spanne et al., «Simulations of stress-strain heterogeneities in copper thin films: texture and substrate effects» MORDIKE, «Laser melting of plasma sprayed ceramic coatings», Measurment of imperfections in thermal spray coatings using synchrotron-computed microtomography, pp.137-141, 1988.

C. Sreedhar, G. Santhanakrishan, C. V. Gokularathnam, and R. Krishnamurthy, Effect of processing parameters on the laser glazing of plasma-sprayed alumina???titania ceramic, «Modeling thermal conductivity of thermal spray coatings: comparing predictions to experiments», Proceeding of the 2006 International Thermal Spray Conference, pp.246-251, 2001.
DOI : 10.1016/S0924-0136(01)00682-3

]. T. Troczynski, Q. Yang, and G. John, Post-Deposition Treatment of Zirconia Thermal Barrier Coatings Using Sol-Gel Alumina, Journal of Thermal Spray Technology, vol.8, issue.2, pp.229-234, 1999.
DOI : 10.1361/105996399770350458

R. Venkatarama, G. Das, B. Venkatarama, G. V. Narashima-rao, and R. , Image processing and statistical analysis of microstructures of as plasma sprayed Alumina???13??wt.% Titania coatings, Surface and Coatings Technology, vol.201, issue.6, pp.3691-3700, 2006.
DOI : 10.1016/j.surfcoat.2006.09.001

M. Vippola, S. Ahmaniemi, J. Keranen, P. Vuoristo, T. Lepisto et al., Aluminum phosphate sealed alumina coating: characterization of microstructure, Materials Science and Engineering: A, vol.323, issue.1-2, pp.1-8, 2002.
DOI : 10.1016/S0921-5093(01)01367-3

Z. Wang, A. Kulkarni, S. Seshpande, T. Nakamura, and H. , Effects of pores and interfaces on effective properties of plasma sprayed zirconia coatings, Acta Materialia, vol.51, issue.18, pp.5319-5334, 2003.
DOI : 10.1016/S1359-6454(03)00390-2

B. Wielage, U. Hofmann, S. Steinhauser, G. J. Zimmermann, T. You et al., «Improving wear and corrosion resistance of thermal sprayed coatings» LINDIG, «Determination of elastic modulus and residual stress of plasma-sprayed tungsten coating on steel substrate» «Finite-element modelling of the actual structure of cellular materials determined by X-Ray tomography», YOUNG, H. P.R. FREDERIKSE, «Compilation of the static dielectric constants of inorganic solids», pp.136-138, 1973.

V. J. Zhao and . Silberschmidt, Micromechanical analysis of effective properties of plasma sprayed alumina coatings, ZHA 05, pp.287-293, 2005.
DOI : 10.1016/j.msea.2005.10.059