S. G. Advani, Prediction of ber orientation during processing of short ber composites, 1987.

S. G. Advani and C. L. Tucker, The use of tensors to describe and predict ber orientation in short ber composites, Journal of Rheology, vol.31, p.751784, 1987.

S. G. Advani and T. C. , Closure approximations for three-dimensional structure tensors, Journal of Rheology, vol.34, p.367386, 1990.

A. Ahmed and A. N. Alexandrou, Unsteady ow of semi-concentrated suspensions using nite deformation tensors, Journal of Non-Newtonian Fluid Mechanics, vol.55, p.115136, 1994.

A. Ait-kadi and M. Grmela, Modelling the rheological behaviour of bre suspensions in viscoelastic media, Journal of Non-Newtonian Fluid Mechanics, vol.53, p.6581, 1994.

A. N. Alexandrou and A. Ahmed, Unsteady ow of dilute ber suspensions using a generalized eulerian lagrangian approach, Polymer Composite, vol.15, p.418426, 1994.

A. N. Alexandrou and T. C. Papanastasiou, Non-isothermal Extrusion of Composite Materials, International Polymer Processing, vol.5, issue.1, p.1519, 1990.
DOI : 10.3139/217.900015

M. C. Altan, S. G. Advani, S. G. Guceri, and R. B. Pipes, Description of the orientation state for ber suspensions in homogeneous ows, Journal of Rheology, vol.33, p.12891155, 1989.

M. C. Altan and L. Tang, Orientation tensors in simple ows of dilute suspensions of non-brownian rigid elliso ?s, comparison of analytical and approximate solutions, Rheol. Acta, vol.32, p.227244, 1993.

M. C. Altan, S. I. Guceri, and R. B. Pipes, Anisotropic channel ow of ber suspensions, Journal of Non-Newtonian Fluid Mechanics, vol.42, p.6583, 1992.

M. C. Altan, S. S. Selcuk, I. Guceri, and R. B. Pipes, numerical prediction of three-dimensional ber orientation in hele-shaw ows, Polym. Eng. Sci, vol.30, p.848859, 1990.

A. Ammar, B. Mokdad, F. Chinesta, and R. Keunings, A new family of solvers for some classes of multidimensional partial dierential equations encountered in kinetic theory modeling of complex uids, Journal of Non-Newtonian Fluid Mechanics, vol.139, p.153176, 2006.

A. Ammar, B. Mokdad, F. Chinesta, and R. Keunings, A new family of solvers for some classes of multidimensional partial dierential equations encountered in kinetic theory modelling of complex uids : Part ii : Transient simulation using space-time separated representations, Journal of Non-Newtonian Fluid Mechanics, vol.144, p.98121, 2007.

A. Ammar, D. Ryckelynck, F. Chinesta, and R. Keunings, On the reduction of kinetic theory models related to nitely extensible dumbbells, Journal of Non- Newtonian Fluid Mechanics, vol.134, p.136147, 2006.

E. Anczurowski and R. G. Cox, The kinetics of owing dispersions iv. transient orientations of cylinders, Journal of Colloid and Interface Science, vol.23, p.547562, 1967.

G. Ausias, Etude de l'extrusion de tubes en polymères thermoplastiques chargés de bres courtes, 1991.

J. Azaiez, Constitutive equations for ber suspensions in viscoelastic media, Journal of Non-Newtonian Fluid Mechanics, vol.66, p.3554, 1996.

J. Azaiez, R. Guenette, and A. Ait-kadi, Investigation of the abrupt contraction ow of ber suspensions in polymeric uids, Journal of Non-Newtonian Fluid Mechanics, vol.73, p.289316, 1997.

A. Baloch and M. F. Webster, A computer simulation of complex ows of ber suspensions, Computer Fluids, vol.24, p.135151, 1995.

P. Barbosa, Simulation of the injection of reinforced thermoplastics, 2005.

G. K. Batchelor, Slender body theory for particules arbitrary cross section in stokes ow, Journal of Fluid Mechanics, vol.44, p.419440, 1970.

G. K. Batchelor, The stress generated in a non-dilute suspension of elongated particles by pure straining motion, Journal of Fluid Mechanics, vol.102, issue.04, p.813829, 1970.
DOI : 10.1007/BF01973476

S. Batkam, Thermique multidomaines en simulation num ?ique du remplissage 3D, 2001.

R. S. Bay, Fiber orientation in injection molded composites : A comparaison of theory and experiment, 1991.

R. S. Bay, C. L. Tucker, and . Iii, Fiber orientation in simple injection moulding. part i : Theory and numerical methods, Polymer Composite, vol.13, p.317331, 1992.

R. S. Bay, C. L. Tucker, and . Iii, Fiber orientation in simple injection moulding. part ii : Experimental results, Polymer Composite, vol.13, p.332341, 1992.

R. S. Bay, C. L. Tucker, and D. R. Iii, Eect of processing on ber orientation in simple injection moldings. ANTEC'89,SPE Technical Papers, p.539542, 1989.

M. L. Becraft and A. B. Metzner, The rheology, ber orientation, and processing behavior of ber-lled uids, Journal of Rheology, vol.36, p.143174, 1992.

E. Bigot, Simulation tridimensionnelle du remplissage de corps minces par injection, 2001.
URL : https://hal.archives-ouvertes.fr/tel-00275305

G. Bonhome and T. Brouwer, Etude de l'orientation de bre courtes lors de la mise en oeuvre des composites. Ecole Nationale Sup ?ieure des Mines de Paris, BIBLIOGRAPHIE, vol.213, 1990.

P. F. Bright, F. Crowson, and M. J. Folkes, A study of the eect or injection speed on bre orientation in simple moulding of short glass ber-lled polypropylene, Journal of Material Sciences, vol.13, p.24972506, 1978.

P. F. Bright and M. W. Darlington, Factors inuencing ber orientation and mechanical properties in bre reinforced thermoplastics injection moldings, Plastics and Rubber Processing and Application, vol.1, p.139147, 1981.

A. N. Brooks and T. J. Hugues, Streamline upwind petrov galerkin formulations for convection dominated ows with particular emphasis on the incompressible navier-stokes equations, Computer methods in applied mechanics and engineering, vol.32, 1982.

R. Y. Chang, F. C. Shiao, and W. L. Yang, Simulation of director orientation of liquid crystalline polymers in 2d ows, Journal of Non-Newtonian Fluid Mechanics, vol.55, p.120, 1994.

C. H. Chen and Y. C. Wang, Eective thermal conductivity of misoriented shortber reinforced thermoplastics, Mechanics of Materials, vol.23, p.217228, 1996.

K. Chiba and K. Nakamura, Numerical solution of ber orientation in a recirculating ow. part 1 : Orientation of a single ber in a recirculating ow within a slot, Trans. J. Text. Mach. Soc. Japan, vol.49, p.8591, 1996.

K. Chiba and K. Nakamura, Numerical solution of ber orientation in a recirculating ow. part 2 : Analysis of ber orientation in a recirculating ow within a slot using a statistical method, Trans. J. Text. Mach. Soc. Japan, vol.49, p.107113, 1996.

K. Chiba, K. Kawata, and K. Nakamura, Numerical solution of ber orientation in a recirculating ow. part 3 : Fiber orientation in a recirculating ow within a salient corner of an abrupt expansion channel, Trans. J. Text. Mach. Soc. Japan, vol.50, p.18, 1996.

K. Chiba, K. Nakamura, and D. V. Boger, A numerical solution for the ow of dilute ber suspensions through an axisymetric contraction, Journal of Non- Newtonian Fluid Mechanics, vol.35, p.114, 1990.

F. Chinesta and G. Chaidron, On the steady solution of linear advection problems in steday recirculating ows, Journal of Non-Newtonian Fluid Mechanics, vol.98, p.6580, 2001.

S. Chono and M. Makino, Numerical simulation of ber suspension ow between parallel plates, Trans-B, pp.61-3190, 1995.

D. H. Chung and T. H. Kwon, Numerical studies of ber suspensions in an axisymetric radial diverging ow : the eects of modeling and numerical assumptions, Journal of Non-Newtonian Fluid Mechanics, vol.107, p.6796, 2002.

S. T. Chung and T. H. Kwon, Numerical simulation of ber orientation in injection molding of short-ber-reinforced thermoplastics, Polym. Eng. Sci, vol.35, p.604618, 1995.

S. T. Chung and T. H. Kwon, Coupled analysis of injection molding lling and ber orientationj including in-plane velocity gradient eect, Polym. Compos, vol.17, p.859872, 1996.

J. S. Cintra and C. L. Tucker, Orthotropic closure approximations for ow-induced ber orientation, Journal of Rheology, vol.39, p.10951122, 1995.

T. Coupez, Grandes transformations et remaillage automatique, 1991.

T. Coupez, Stable-stabilized nite element for 3d forming calculation, Communication interne, issue.11, 1996.

T. Coupez and S. Marie, From a direct solver to a parallel iterative solver in 3d forming simulation, International journal of Supercomputer and Application, vol.11, p.205211, 1997.

T. Coupez and E. Pichelin, Solution of the 3d mold lling by a taylor discontinuous galerkin method, Fourth World Congress on Computational Mechanics, Argentine, 1998.

M. W. Darlington and A. C. Smith, Some features of the injection molding of short fiber reinforced thermoplastics in center sprue-gated cavities, Polymer Composites, vol.22, issue.1, p.16, 1987.
DOI : 10.1002/pc.750080104

M. W. Darlington, B. K. Gladwell, and G. R. Smith, Stucture and mechanical properties in injection molded discs of glass bre reinforced polypropylene, Polymer, vol.18, p.12691274, 1977.

S. M. Dinh and R. C. Amstrong, A rheological equation of state for semiconcentrated ber suspensions, Journal of Rheology, vol.28, p.207227, 1984.

M. Doi, Molecular dynamics and rheological properties of concentrated solution of rodlike polymer isotropc and liquid cristallien phasses, Journal of Polymer Science, vol.19, p.222243, 1981.

M. Doi and S. F. Edwards, Dynamics of rod-like macromolecules in concentrated solution. part1, Journal Chem. Soc. Faraday Trans II, vol.74, p.560570, 1978.

M. Doi and S. F. Edwards, Dynamics of rod-like macromolecules in concentrated solution. part2, Journal Chem. Soc. Faraday Trans II, vol.74, p.918932, 1978.

J. Donea, A Taylor-Galerkin method for convective transport problems, International Journal for Numerical Methods in Engineering, vol.1, issue.1, p.101119, 1984.
DOI : 10.1002/nme.1620200108

J. Donea and L. Quartapelle, An introduction to nite element methods for transient advection problems Computer methods in applied mechanics and engineering, p.169203, 1992.

J. D. Eshelby, The determination of the elastic eld of an ellipsoidal inclusion, and related problems, Proc. Roy. Soc. london, A241, p.376, 1957.

X. Fan, N. Phan-thien, and R. Zheng, Simulation of bre suspension ows by the brownian conguration eld method, Journal of Non-Newtonian Fluid Mechanics, vol.84, p.257274, 1999.

S. Flouret, Rhéologie et orientation de bres dans des pièces injectées en thermoplastique renforcé, 2001.

F. Folgar and C. L. Tucker, Orientation behavior of bers in concentrated suspensions, Journal of Reinforced Plastics and Composites, vol.3, p.98119, 1984.

M. J. Folkes and R. D. , Orientation eects during the ow of short ber reinforced thermoplastics, Polymer, vol.21, p.12521258, 1980.

M. Fortin and A. Fortin, Newer and newer elements for incompressible ows. Finite element in uids, BIBLIOGRAPHIE, vol.215, p.171187, 1985.

F. L. Frey-s and H. T. , Stabilized nite element methods : II the incompressible Navier-Stokes equations, Comput. Methods Appl. Mech. Engrg, vol.29, p.209233, 1992.

M. Fujiyama, H. Awaya, and S. Kimura, Mechanical anisotropy of injection pp, Journal of Applied Polymer Science, vol.21, p.32913309, 1977.

G. P. Galdi and B. D. Reddy, Well-posedness of the propblem of ber suspension ows, Journal of Non-Newtonian Fluid Mechanics, vol.83, p.205230, 1999.

F. Gauthier, H. L. Goldsmith, and S. G. Mason, Particle Motions in Non???Newtonian Media. II. Poiseuille Flow, Transactions of the Society of Rheology, vol.15, issue.2, p.297, 1971.
DOI : 10.1122/1.549212

J. W. Gillepsie, J. A. Vanderschuren, and R. B. Pipes, Process induced bre orientation : numerical simulation with experimental verication, Polymer Composite, vol.6, 1984.

T. Giroud, Mesure et calcul des contraintes résiduelles dans les pièces injectées en thermoplastique avec et sans bres de renfort, 2001.

J. D. Goddard, Tensile behavior of power-law uids containing oriented slender bers, Journal of Rheology, vol.22, p.615622, 1978.

C. Gruau and T. Coupez, 3D tetrahedral, unstructured and anisotropic mesh generation with adaptation to natural and multidomain metric, Computer Methods in Applied Mechanics and Engineering, vol.194, issue.48-49, p.49514976, 2005.
DOI : 10.1016/j.cma.2004.11.020
URL : https://hal.archives-ouvertes.fr/hal-00517639

M. Gupta and K. K. Wang, Fiber orientation and mechanical properties of short bre reinforced injection moulding composites : simulated and experimental results, Polymer Composite, vol.14, p.367382, 1993.

G. L. Hand, A theory of anisotropic uids, Journal of Fluid Mechanics, vol.13, p.3346, 1962.

G. L. Hand, A theory of anisotropic uids, Journal of Fluid Mechanics, vol.13, p.3346, 1962.

J. B. Harris and J. F. Pittman, Equivalent ellipsoidal axis ratios of slender rod like particules, Journal of Colloid and Interface Science, vol.50, p.280282, 1975.

H. Hatta and M. Taya, Eective thermal conductivity of a misoriented short ber composite, Journal of Applied Physics, vol.58, p.24782486, 1985.

E. J. Hinch and L. G. Leal, Constitutive equations in suspension mechanics. Part 1. General formulation, Journal of Fluid Mechanics, vol.48, issue.03, p.481495, 1975.
DOI : 10.1063/1.1671698

E. J. Hinch and L. G. Leal, Constitutive equations in suspension mechanics. part 1. approximate forms for a suspension of rigid particles aected by brownian rotations general formulation, Journal of Fluid Mechanics, vol.76, p.187208, 1976.

M. Houlière, Analysis of warpage for short ber reinforced thermoplastic materials, 2006.

T. J. Hugues, Multiscale phenomena: Green's functions, the Dirichlet-to-Neumann formulation, subgrid scale models, bubbles and the origins of stabilized methods, Computer Methods in Applied Mechanics and Engineering, vol.127, issue.1-4, pp.387-401, 1995.
DOI : 10.1016/0045-7825(95)00844-9

G. B. Jeery, The motion of ellipsoidal particules in a viscous uid, p.161179, 1922.

G. B. Jeery, A theory of anisotropic uids, p.161179, 1922.

K. K. Kabanemi, H. , and J. F. , Modeling and simulation of nonisothermal eects in injection molding of rigid ber suspensions, Journal of Injection Molding Technology, vol.3, p.8087, 1999.

K. K. Kabanemi, J. F. Garcia-rejon, and A. , Numerical simulation of the ow and ber orientation in reinforced thermoplastic injection molded products, Intern. Polymer Processing, vol.2, p.182191, 1997.

G. Kaliske and H. Seifert, The extend to which bre breakdown can be inuenced when injection molding glass bre reinforced thermoplastics, Plaste U ; kaut, vol.22, p.739746, 1975.

M. R. Kamal and P. Singh, The extend to which bre breakdown can be inuenced when injection molding glass bre reinforced thermoplastics, Plaste U ; kaut, vol.22, p.739746, 1975.

V. Karpov and M. Kaufman, Injection molding of glass reinforced nylon 66, British Plastics, vol.38, p.498506, 1965.

S. Kenig, Fiber orientation development in molding of polymer composites, Polymer Composites, vol.15, issue.1, p.5055, 1986.
DOI : 10.1002/pc.750070110

D. L. Koch and E. S. Shaqfeh, The average rotation rate of a ber in the linear ow of semi dilute suspension, Physics Fluid, p.2093, 1990.

C. Lesage, Etude de l'orientation de bres dans du santoprene, 2005.

G. G. Lipscomb, M. M. Denn, D. U. Hur, and D. V. Boger, The ow of ber suspensions in complex geometries, Journal of Fluid Mechanics, vol.26, p.297325, 1988.

G. G. Lipscomb, R. Keunigs, G. Marucci, and M. M. Denn, A continuum theory for ber suspensions, Proc. IX Int. Congress on rheology, p.497, 1984.

M. B. Mackaplow and E. S. Shaqfeh, A numerical study of the rheological properties of suspensions of rigid, non-brownian bres, Journal of Fluid Mechanics, vol.329, p.155186, 1996.

M. T. Manzarini and M. Manzarini, A mixed approach to nite element analysis of hyperbolic heat conduction problems, International Journal for Numerical Methods for Heat and Fluid Flow, vol.8, issue.1, p.8396, 1998.

. G. Masons, R. Manley, and . J. St, The particules motion in sheared suspensions orientations of rigid rods, p.117131, 1957.

A. Megally, Modélisation de l'orientation de bres, 2005.

F. Meslin, Propriétés rhéolgiques des composites bres courtes à l'état fondu, 1997.

H. Miled, L. Silva, J. F. Agassant, and T. Coupez, Numerical simulation of ber orientation and resulting thermo-elastic behavior in reinforced thermo-plastics, p.217

I. Monton, Modelización Numérica Tridimensional de la Inyección de Termoplásticos reforzados con Fibras Cortas, 2004.

J. M. Munganga, B. D. Reddy, and K. J. Diatezua, Aspects of the thermodynamic stability of bre suspension ows, Journal of Non-Newtonian Fluid Mechanics, vol.92, p.135150, 2000.

Y. Oukaci, Etude du comportement rhéologique et de l'orientation des bres dans des thermplastiques injectés, 2006.

T. C. Papanastasiou and A. N. Alexandrou, Isothermal extrusion of non-dilute ber suspensions, Journal of Non-Newtonian Fluid Mechanics, vol.25, p.313328, 1987.

C. J. Petrie, The rheology of bre suspensions, Journal of Non-Newtonian Fluid Mechanics, vol.87, p.369402, 1999.

N. Phan-thien, . J. Fanx, and R. I. Tanner, Folgar-tucker constant for a ber suspension in a newtonian uid, Journal of Non-Newtonian Fluid Mechanics, vol.103, p.251260, 2002.

N. Phan-thien and A. L. Graham, A new constitutive model for ber suspensions, Rheology Acta, vol.30, p.4457, 1991.

E. Pichelin and T. Coupez, A taylor discontinuous galerkin method for the thermal solution in 3d mold lling, Computer methods in applied mechanics and engineering, vol.178, p.153169, 1999.

R. B. Pipes, D. W. Con, S. F. Shuler, and P. Simacek, Non newtonian constitutive relationships for hyperconcentrated ber suspensions, Journal Compos. Mat, vol.28, p.343351, 1994.

A. Poitou, F. Chinesta, and R. Torres, Numerical simulation of the steady recirculating ows of ber suspensions, Journal of Non-Newtonian Fluid Mechanics, vol.90, p.6580, 2000.

S. Prager, Stress???Strain Relations in a Suspension of Dumbbells, Transactions of the Society of Rheology, vol.1, issue.1, p.53, 1994.
DOI : 10.1122/1.548808

A. Quibat, Etude de l'orientation des bres de verre dans des plaques injectées en polypropylène, 2003.

M. Ramazani, A. Ait-kadi, and M. Grmela, Rheological modelling of short ber thermoplastic composites, Journal of Non-Newtonian Fluid Mechanics, vol.73, p.241260, 1997.

M. Ramazani, A. Ait-kadi, and M. Grmela, Rheology of ber suspensions in viscoelastic media : Experiments and model predictions, Journal of Rheology, vol.45, p.945962, 2001.

S. Ranganathan and S. G. Advani, Fiber -ber interaction in homogeneous ows of non dilute suspensions, Journal of Rheology, vol.35, p.14991522, 1991.

S. Ranganathan and S. G. Advani, A simultaneous solution for ow and ber orientation in axisymmetric, diverging radial ow, Journal of Non-Newtonian Fluid Mechanics, vol.47, p.107136, 1993.

B. D. Reddy and G. P. Mitchell, Finite element analysis of bre suspension ows

J. Rosenberg, M. M. Denn, and R. Keunings, Simulation of non-recirculating ows of dilute ber suspensions, Journal of Non-Newtonian Fluid Mechanics, vol.37, p.317345, 1990.

M. Sepehr, G. Ausias, and P. J. Carreau, Rheological properties of short ber lled polypropylene in transient shear ow, Journal of Non-Newtonian Fluid Mechanics, vol.123, p.1932, 2004.

C. Servais, Flow modelling of concentrated long bre suspensions, 2000.

C. Servais, A. Luciani, and J. A. Manson, Fiber ber interaction in concentrated suspension : dispersed ber bundles, Journal of Rheology, vol.43, p.10051018, 1999.

E. Shaqfeh and G. Fredrickson, The hydrodynamic stress in a suspension of rods, Physics of Fluids A: Fluid Dynamics, vol.2, issue.1, p.724, 1990.
DOI : 10.1063/1.857683

L. Silva and T. Coupez, A unifed model of the lling and post lling stages in 3d injection moulding simulation, 2002.

. Souloumiacb, Etude rhéologique, modélisation et simulation numérique de l ?écoulement des thermoplastiques chargés de bres courtes, 1996.

C. A. Stover, D. Koch, and C. Cohen, Observations of ber orientation in simple shear ow of semi-dilute suspensions, Journal of Fluid Mechanics, vol.238, p.277296, 1992.

L. Tang and M. C. And-altan, Entry ow of the bre suspensions in a straight channel, Journal of Non-Newtonian Fluid Mechanics, vol.56, p.183216, 1995.

J. Thomasset, Rhélogie du polypropyléne fondu renforcé par des bres de verre longues, 1994.

J. Thomasset, P. J. Carreau, B. Sanschagrin, and G. Ausias, Rheological properties of long glass ber lled polypropylene, Journal of Non-Newtonian Fluid Mechanics, vol.125, p.2534, 2005.

B. J. Trevelyan and S. G. Mason, Particule motions in sheared suspensions : I. rotations, Journal of Colloid Science, vol.6, p.354367, 1951.

C. L. Tucker, Flow regimes for bers suspensions in narrow gaps, Journal of Non- Newtonian Fluid Mechanics, vol.39, p.239268, 1991.

W. B. Vanderheyden and G. Ryskin, Computer simulation of ow and molecular orientation in liquid crystal polymers, Journal of Non-Newtonian Fluid Mechanics, vol.23, p.383414, 1987.

V. Verleye, Simulation Numérique de l'orientaiton de bres en moulage par injection de pièces complexes en matériaux composite, 1995.

B. E. Verweyst, Numerical predictions of ow-induced ber orientation in threedimensional geometries, 2002.

B. E. Verweyst, C. L. Tucker, and . Iii, Fiber Suspensions in Complex Geometries: Flow/Orientation Coupling, The Canadian Journal of Chemical Engineering, vol.84, issue.6, p.10931106, 2002.
DOI : 10.1002/cjce.5450800611

B. E. Verweyst, C. L. Tucker, . Iii, and P. H. Foss, The optimized quasi-planar approximation for predicting ber orientation in injection-molded composites, Int. Polym. Process. BIBLIOGRAPHIE, vol.12, issue.219, p.238248, 1997.

M. Vincent and J. F. Agassant, Experimental study and calculations of short glass bre orientation in centre gated moulded disks, Polymer Composite, vol.7, p.7383, 1986.

M. Vincent and J. F. Agassant, Numerical and experimental study of the ber motion in reinforced thermoplastic ows, Rheology Acta, vol.26, p.144, 1988.

M. Vincent, E. Devilers, and J. F. Agassant, Fiber orientation calculation in injection moulding of reinforced thermoplastics, Journal of Non-Newtonian Fluid Mechanics, vol.73, p.317326, 1997.

M. Vincent, T. Giroud, A. Clarke, and C. Eberhardt, Description and modeling of ber orientation in injection molding of ber reinforced thermoplastics, Polymer, vol.46, p.67196725, 2005.

Y. Yamane, Y. Kaneda, and M. Dio, Numerical simulation of semi-dilute suspension of rodlike particules in shear ow, Journal of Non-Newtonian Fluid Mechanics, vol.54, p.405421, 1994.