A comparison between cancellous bone compressive moduli determined from surfaced strain and total specimen deflection, BIBLIOGRAPHIQUES Orth. Res. Soc, vol.16, p.151, 1991. ,
Bone loss and teeth, Joint Bone Spine, vol.72, issue.3, pp.215-236, 2005. ,
DOI : 10.1016/j.jbspin.2004.03.007
The temperature dependence of the deformation of bone, Journal of Biomechanics, vol.1, issue.4, pp.323-332, 1968. ,
DOI : 10.1016/0021-9290(68)90026-2
Ultrasonic analysis of the Young's modulus of cortical bone, Journal of Biomedical Engineering, vol.4, issue.1, pp.23-30, 1982. ,
DOI : 10.1016/0141-5425(82)90022-X
Apparent Young's modulus of human radius using inverse finite-element method, Journal of Biomechanics, vol.40, issue.9, pp.2022-2030, 2007. ,
DOI : 10.1016/j.jbiomech.2006.09.018
Effects of Rehydration State on the Flexural Properties of Whole Mouse Long Bones, Journal of Biomechanical Engineering, vol.115, issue.4A, pp.447-456, 1993. ,
DOI : 10.1115/1.2895510
Fatigue life of compact bone???I effects of stress amplitude, temperature and density, Journal of Biomechanics, vol.9, issue.1, pp.27-34, 1976. ,
DOI : 10.1016/0021-9290(76)90136-6
The compressive behavior of bone as a two-phase porous structure, The Journal of Bone & Joint Surgery, vol.59, issue.7, pp.954-62, 1977. ,
DOI : 10.2106/00004623-197759070-00021
Mechanical Properties and Composition of Cortical Bone, Clinical Orthopaedics and Related Research, vol.&NA;, issue.135, pp.192-217, 1978. ,
DOI : 10.1097/00003086-197809000-00041
The elastic moduli of human subchondral, trabecular, and cortical bone tissue and the size-dependency of cortical bone modulus, Journal of Biomechanics, vol.23, issue.11, pp.1103-1116, 1990. ,
DOI : 10.1016/0021-9290(90)90003-L
Age-dependent change in the 3D structure of cortical porosity at the human femoral midshaft, Bone, vol.40, issue.4, pp.957-65, 2007. ,
DOI : 10.1016/j.bone.2006.11.011
The effects of drying and re-wetting on some mechanical properties of cortical bone, Journal of Biomechanics, vol.21, issue.5, pp.439-480, 1988. ,
DOI : 10.1016/0021-9290(88)90150-9
Prediction of mechanical properties of cortical bone by quantitative computed tomography, Medical Engineering & Physics, vol.30, issue.3, pp.321-328, 2008. ,
DOI : 10.1016/j.medengphy.2007.04.008
The influence of occlusal loading location on stresses transferred to implant-supported prostheses and supporting bone: a three-dimensional finite element study, The Journal of Prosthetic Dentistry, vol.91, issue.2, pp.144-50, 2004. ,
DOI : 10.1016/j.prosdent.2003.10.018
Intrinsic mechanical properties of trabecular calcaneus determined by finite-element models using 3D synchrotron microtomography, Journal of Biomechanics, vol.40, issue.10, pp.2174-83, 2007. ,
DOI : 10.1016/j.jbiomech.2006.10.032
URL : https://hal.archives-ouvertes.fr/inserm-00557229
Principes d'anatomie et de physiologie Quebec DeBoëck Université, 1994. ,
Biochemical properties of cortical allograft bone using a new method of bone strength measurement. A comparison of fresh, fresh-frozen and irradiated bone, J Bone Joint Surg Br, vol.78, pp.363-371, 1996. ,
Mechanical properties of buccal compact bone of the mandibular ramus in human adults and children: relationship of the elastic modulus to the direction of the osteon and the porosity ratio, Bull Tokyo Dent Coll, vol.39, pp.47-55, 1998. ,
Assessment of composition and anisotropic elastic properties of secondary osteon lamellae, Journal of Biomechanics, vol.39, issue.12, pp.2282-94, 2006. ,
DOI : 10.1016/j.jbiomech.2005.07.009
Evaluating Parameters of Osseointegrated Dental Implants Using Finite Element Analysis??A Two-Dimensional Comparative Study Examining the Effects of Implant Diameter, Implant Shape, and Load Direction, Journal of Oral Implantology, vol.24, issue.2, pp.80-88, 1998. ,
DOI : 10.1563/1548-1336(1998)024<0080:EPOODI>2.3.CO;2
Mandibular stiffness in humans: Numerical predictions, Journal of Biomechanics, vol.39, issue.10, pp.1903-1916, 2006. ,
DOI : 10.1016/j.jbiomech.2005.05.022
Relationships between material properties and CT scan data of cortical bone with and without metastatic lesions, Medical Engineering & Physics, vol.25, issue.6, pp.445-54, 2003. ,
DOI : 10.1016/S1350-4533(03)00030-4
Scanning acoustic microscope studies of the elastic properties of osteons and osteon lamellae, J Biomech Eng, vol.115, pp.543-551, 1993. ,
Consequences of head size following trauma to the human head, Journal of Biomechanics, vol.35, issue.2, pp.153-60, 2002. ,
DOI : 10.1016/S0021-9290(01)00202-0
Comparison of the trabecular and cortical tissue moduli from human iliac crests, Journal of Orthopaedic Research, vol.15, issue.6, pp.876-84, 1989. ,
DOI : 10.1002/jor.1100070614
Viscoelastic properties of wet cortical bone--II. Relaxation mechanisms, J Biomech, vol.12, pp.679-87, 1979. ,
Viscoelastic properties of wet cortical bone--III. A non-linear constitutive equation, J Biomech, vol.12, pp.689-98, 1979. ,
Viscoelastic properties of wet cortical bone--I. Torsional and biaxial studies, J Biomech, vol.12, pp.657-78, 1979. ,
Finite element analysis to determine implant preload, The Journal of Prosthetic Dentistry, vol.90, issue.6, pp.539-585, 2003. ,
DOI : 10.1016/j.prosdent.2003.09.012
Quality assessment of the cortical bone of the human mandible, Bone, vol.32, issue.1, pp.35-44, 2003. ,
DOI : 10.1016/S8756-3282(02)00921-3
Nonlinear finite element analysis of a splinted implant with various connectors and occlusal forces, Int J Oral Maxillofac Implants, vol.18, pp.331-371, 2003. ,
Energy absorptive properties of human trabecular bone specimens during axial compression, Journal of Orthopaedic Research, vol.9, issue.3, pp.432-441, 1989. ,
DOI : 10.1002/jor.1100070316
The effect of different storage methods on the mechanical properties of trabecular bone, Journal of Biomechanics, vol.26, issue.10, pp.1249-52, 1993. ,
DOI : 10.1016/0021-9290(93)90072-M
Stress distribution around dental implants: influence of superstructure, length of implants, and height of mandible, J Prosthet Dent, vol.68, pp.96-102, 1992. ,
Stimulating effect of implant loading on surrounding bone, Clinical Oral Implants Research, vol.53, issue.(Suppl 1), pp.239-287, 2004. ,
DOI : 10.1111/j.1600-0501.2004.01000.x
Mechanical properties of trabecular bone in the human mandible: Implications for dental implant treatment planning and surgical placement, Journal of Oral and Maxillofacial Surgery, vol.57, issue.6, pp.700-706, 1999. ,
DOI : 10.1016/S0278-2391(99)90437-8
Finite element analysis of the stresses around endosseous implants in various reconstructed mandibular models, Journal of Cranio-Maxillofacial Surgery, vol.30, issue.3, pp.170-77, 2002. ,
DOI : 10.1054/jcms.2002.0310
An experimental study on the dynamic traits of dehydrated mandibles in relation to Yang's modulus and Poisson's ratio of compact bone, Shikwa Gakuho, vol.84, pp.1951-61, 1984. ,
Effects of freezing and freeze-drying on the biomechanical properties of rat bone, Journal of Orthopaedic Research, vol.25, issue.4, pp.405-416, 1984. ,
DOI : 10.1002/jor.1100010409
Young's modulus of trabecular and cortical bone material: Ultrasonic and microtensile measurements, Journal of Biomechanics, vol.26, issue.2, pp.111-120, 1993. ,
DOI : 10.1016/0021-9290(93)90042-D
Elastic properties of human cortical and trabecular lamellar bone measured by nanoindentation, Biomaterials, vol.18, issue.20, pp.1325-1355, 1997. ,
DOI : 10.1016/S0142-9612(97)00073-2
On the dependence of the elasticity and strength of cancellous bone on apparent density, Journal of Biomechanics, vol.21, issue.2, pp.155-68, 1988. ,
DOI : 10.1016/0021-9290(88)90008-5
High-resolution MRI and micro-FE for the evaluation of changes in bone mechanical properties during longitudinal clinical trials: application to calcaneal bone in postmenopausal women after one year of idoxifene treatment, Clinical Biomechanics, vol.17, issue.2, pp.81-89, 2002. ,
DOI : 10.1016/S0268-0033(01)00110-3
A new method to determine trabecular bone elastic properties and loading using micromechanical finite-element models, Journal of Biomechanics, vol.28, issue.1, pp.69-81, 1995. ,
DOI : 10.1016/0021-9290(95)80008-5
Tensile and compressive properties of cancellous bone, Journal of Biomechanics, vol.24, issue.12, pp.1143-1152, 1991. ,
DOI : 10.1016/0021-9290(91)90006-9
X ray micro-tomography an attractive characterisation technic in material sciences.Interactions with materials and atomes, pp.273-286, 2003. ,
Identification des propriétés mécaniques de l'os mandibulaire. Master de sciences chirurgicales, 2007. ,
Stiffness of compact bone: effects of porosity and density, J Biomech, vol.21, pp.13-19, 1988. ,
Variations in cortical material properties throughout the human dentate mandible, Am J Phys Anthropol, vol.120, pp.252-77, 2003. ,
Diskimplant system yields tricortical support to make the most of available bone, Dent.Implantol. Update, vol.2, pp.72-76, 1991. ,
Immediate function of cortically anchored disk disign implants without bone augmentation in moderatly to severely resorbed completely edentuluos maxillae ,
Implants and restaurative dentistry, 2001. ,
A rheologic model for cortical bone. A study of thphysicalproperties of human femoral samples, Acta Orthop Scand, vol.83, pp.1-77, 1965. ,
Factors Affecting the Determination of the Physical Properties of Femoral Cortical Bone, Acta Orthopaedica Scandinavica, vol.31, issue.1, pp.29-48, 1966. ,
DOI : 10.3109/17453676608989401
Three-dimensional finite element analysis of the effect of different bone quality on stress distribution in an implant-supported crown, The Journal of Prosthetic Dentistry, vol.93, issue.3, pp.227-261, 2005. ,
DOI : 10.1016/j.prosdent.2004.12.019
An experimental comparison of living and dead bone in rats. I. Physical properties, J Bone Joint Surg Br, vol.44, pp.412-435, 1962. ,
Multiaxial strength characteristics of trabecular bone, Journal of Biomechanics, vol.16, issue.9, pp.743-52, 1983. ,
DOI : 10.1016/0021-9290(83)90083-0
Structural and radiological parameters for the characterization of jawbone, Clinical Oral Implants Research, vol.2, issue.2, pp.124-157, 2006. ,
DOI : 10.1002/jor.1100090315
Finite element analysis of effect of prosthesis height, angle of force application, and implant offset on supporting bone, Int J Oral Maxillofac Implants, vol.19, pp.819-844, 2004. ,
Properties of the elastic modulus from buccal compact bone of human mandible, Bull Tokyo Dent Coll, vol.37, pp.93-101, 1996. ,
Three-dimensional finite-element analysis investigating the biomechanical effects of human mandibular reconstruction with autogenous bone grafts, Journal of Cranio-Maxillofacial Surgery, vol.34, issue.5, pp.290-298, 2006. ,
DOI : 10.1016/j.jcms.2006.03.004
Application of micro CT and computation modeling in bone tissue engineering, Computer-Aided Design, vol.37, issue.11, pp.1151-1161, 2005. ,
DOI : 10.1016/j.cad.2005.02.006
Basic biomechanical measurements of bone: A tutorial, Bone, vol.14, issue.4, pp.595-608, 1993. ,
DOI : 10.1016/8756-3282(93)90081-K
The elastic properties of trabecular and cortical bone tissues are similar: results from two microscopic measurement techniques, Journal of Biomechanics, vol.32, issue.4, pp.437-478, 1999. ,
DOI : 10.1016/S0021-9290(98)00177-8
Properties and an Anisotropic Model of Cancellous Bone From the Proximal Tibial Epiphysis, Journal of Biomechanical Engineering, vol.104, issue.1, pp.50-56, 1982. ,
DOI : 10.1115/1.3138303
A three-dimensional finite element study on the biomechanical behavior of an FGBM dental implant in surrounding bone, Journal of Biomechanics, vol.40, issue.11, pp.2377-85, 2007. ,
DOI : 10.1016/j.jbiomech.2006.11.019
Changes in the Stiffness, Strength, and Toughness of Human Cortical Bone With Age, Bone, vol.22, issue.1, pp.57-66, 1998. ,
DOI : 10.1016/S8756-3282(97)00228-7
un modèle numérique de l'os mandibulaire, utilisable en implantologie, à l'aide du logiciel FORGE 2005®, Ce modèle est appliqué à l'étude de la répartition des contraintes après mise en place d'un implant à insertion latérale ( Diskimplant®) ,