M. N. Bouchereau-gsell, G. Coupar, A. Apollor, . Inpl, and F. Lrcpp, Formulation desélastomèresdesélastomères, 1997.

W. Hofmann, Rubber Technology Handbook, page 223, 1989.

J. E. Mark, E. Erman, and F. R. Eirich, Science and technology of rubber, p.291, 1978.

E. M. Dannenberg, The effect of surface chemical interactions on the properties of filled-reinforced rubbers, Rubber Chem. Technol, vol.48, 1975.

E. M. Dannenberg, Filler Choices in the Rubber Industry, Rubber Chemistry and Technology, vol.55, issue.3, p.860, 1982.
DOI : 10.5254/1.3535905

J. A. Harwood and A. R. Payne, Stress softening in natural rubber vulcanizates. Part III. Carbon black-filled vulcanizates, Journal of Applied Polymer Science, vol.10, issue.2, p.315, 1966.
DOI : 10.1002/app.1966.070100212

A. R. Payne and R. E. Whittaker, Renforcement desélastomèresdesélastomères. Importance of hysteresis in the reinforcement of elastomers., page 233, J.B. Donnet, CNRS, 1975.

Z. Rigbi, Reinforcement of rubber by carbon black Advances in polymer Science, p.21, 1980.

L. Mullins, Effect of Stretching on the Properties of Rubber, Rubber Chemistry and Technology, vol.21, issue.2, pp.281-300, 1948.
DOI : 10.5254/1.3546914

J. A. Harwood, L. Mullins, and A. R. Payne, Stress softening in rubbers : A review, Journal of the IRI, pp.17-27, 1967.

A. Robisson, Comportement visco-hyperélastique endommageable d'´ elastomères SBR et PU : Prévision de la durée de vie en fatigue, Thèse, Ecole Nationale Supérieure des Mines de Paris, 2000.

H. Bouasse and Z. Carriere, Annales de la faculté des sciences de Toulouse, p.257, 1903.

L. Mullins, Effect of streching on the properties of rubber, J. Rubb. Res, vol.16, pp.275-289, 1947.

L. L. Mullins, The Thixotropic Behavior of Carbon Black in Rubber., The Journal of Physical and Colloid Chemistry, vol.54, issue.2, p.239, 1950.
DOI : 10.1021/j150476a006

L. Mullins and N. R. Tobin, Theorical model for the elastic behavior of filled?reinforced vulcanized rubbers, Proceedings of the third Rubber Technology Conference, pp.397-412, 1956.

F. Bueche, Molecular basis for the mullins effect, Journal of Applied Polymer Science, vol.4, issue.10, pp.107-114, 1960.
DOI : 10.1002/app.1960.070041017

J. A. Harwood, L. Mullins, and A. R. Payne, Stress softening in natural rubber vulcanizates. Part II. Stress softening effects in pure gum and filler loaded rubbers, Journal of Applied Polymer Science, vol.9, issue.9, p.3011, 1965.
DOI : 10.1002/app.1965.070090907

J. A. Harwood and A. R. Payne, Stress softening in natural rubber vulcanizates. Part IV. Unfilled vulcanizates, Journal of Applied Polymer Science, vol.10, issue.8, p.1203, 1966.
DOI : 10.1002/app.1966.070100811

D. Turnbull and J. C. Fisher, Rate of Nucleation in Condensed Systems, The Journal of Chemical Physics, vol.17, issue.1, p.71, 1949.
DOI : 10.1063/1.1747055

P. J. Flory, Thermodynamics of Crystallization in High Polymers. I. Crystallization Induced by Stretching, The Journal of Chemical Physics, vol.15, issue.6, p.397, 1947.
DOI : 10.1063/1.1746537

M. Avrami, Kinetics of Phase Change. I General Theory, The Journal of Chemical Physics, vol.7, issue.12, p.1103, 1939.
DOI : 10.1063/1.1750380

L. Mandelkern, Crystallisation of polymers, page 215, 1964.

A. E. Woodward, Atlas of polymer morphology, 1989.

C. K. Davies and O. Long, Morphology oftrans-1, 4-polyisoprene crystallized in thin films, Journal of Materials Science, vol.2, issue.7, pp.2165-2183, 1977.
DOI : 10.1007/BF00552237

A. Morss, An X-ray Study of Stretched Rubber, Journal of the American Chemical Society, vol.60, issue.2, p.237, 1938.
DOI : 10.1021/ja01269a005

H. Hiratsika, M. Hashiyama, S. Tomita, and H. Kawai, The solid state of polymers, 1974.

C. Bunn, Molecular structure and rubber-like elasticity. 1. the cristal structure of b gutta?percha, rubber and polychloroprène, Proc. Roy. Soc. A, p.180, 1942.

P. J. Phillips and N. Vatansever, Regime transitions in fractions of cis-polyisoprene, Macromolecules, vol.20, issue.9, p.2138, 1987.
DOI : 10.1021/ma00175a016

W. L. Holt and A. T. Mcpherson, Change of volume of rubber on stretching: Effects of time, elongation, and temperature, Journal of Research of the National Bureau of Standards, vol.17, issue.5, p.657, 1941.
DOI : 10.6028/jres.017.036

G. R. Mitchel, A wide-angle X-ray study of the development of molecular orientation in crosslinked natural rubber, Polymer, vol.25, issue.11, pp.1562-1569, 1984.
DOI : 10.1016/0032-3861(84)90148-4

I. S. Choi and C. M. Roland, Strain-Crystallization of Guayule and Hevea Rubbers, Rubber Chemistry and Technology, vol.70, issue.2, pp.202-210, 1997.
DOI : 10.5254/1.3538425

M. Cyr, B. Husson, and A. Carles-gibergues, D??termination, par diffraction des rayons X, de la teneur en phase amorphe de certains mat??riaux min??raux, Le Journal de Physique IV, vol.08, issue.PR5, pp.5-23, 1998.
DOI : 10.1051/jp4:1998504

D. J. Johnson, Cristallinity, crystallite size and lattice perfection in fibrous polymers, Adv. X-Ray Anal, vol.24, pp.25-36, 1981.

D. J. Lee and J. A. Dononvan, Microstructural Changes in the Crack Tip Region of Carbon-Black-Filled Natural Rubber, Rubber Chemistry and Technology, vol.60, issue.5, pp.910-924, 1987.
DOI : 10.5254/1.3536164

C. L. Davies, S. V. Wolfe, R. Gelling, and A. G. Thomas, Strain crystallisation in random copolymers produced by epoxidation of cis-1,4 polyisoprene [46] A. Peterlin. Radical formation and fracture of highly drawn crystalline polymers, Polymer J. Macromol. Sci, vol.24, issue.64, pp.107-113583, 1972.

A. Peterlin, Fracture mechanism of drawn oriented crystalline polymers, Journal of Macromolecular Science, Part B, vol.7, issue.4, pp.705-727, 1973.
DOI : 10.1080/00222347308212750

A. Peterlin, Structural model of mechanical properties and failure of crystalline polymer solids with fibrous structure, International Journal of Fracture, vol.171, issue.10, pp.761-780, 1975.
DOI : 10.1007/BF00012895

S. Toki, T. Fujimaki, and M. Okuyama, Strain-induced crystallization of natural rubber as detected real-time by wide-angle X-ray diffraction technique, Polymer, vol.41, issue.14, pp.5423-5429, 2000.
DOI : 10.1016/S0032-3861(99)00724-7

F. L. Yerzley, Adhesion of Neoprene to Metal, Industrial & Engineering Chemistry, vol.31, issue.8, p.950, 1939.
DOI : 10.1021/ie50356a007

A. N. Gent and P. B. Lindley, Internal rupture of bonded rubber cylenders in tension, Proc. Roy. Soc. A, pp.195-205, 1958.

A. E. Oberth and R. S. Bruener, Tear Phenomena around Solid Inclusions in Castable Elastomers, Transactions of the Society of Rheology, vol.9, issue.2, pp.165-185, 1965.
DOI : 10.1122/1.548997

A. N. Gent and B. Park, Failure processes in elastomers at or near a rigid spherical inclusion, Journal of Materials Science, vol.17, issue.6, pp.1947-1956, 1984.
DOI : 10.1007/BF00550265

A. N. Gent, Detachment of an elastic matrix from a rigid spherical inclusion, Journal of Materials Science, vol.7, issue.11, pp.2884-2888, 1980.
DOI : 10.1007/BF00550559

J. M. Ball, Discontinuous Equilibrium Solutions and Cavitation in Nonlinear Elasticity, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.306, issue.1496, pp.557-661, 1982.
DOI : 10.1098/rsta.1982.0095

M. S. Chou-wang and C. O. Horgan, Void nucleation and growth for a class of incompressible nonlinearly elastic materials, International Journal of Solids and Structures, vol.25, issue.11, pp.1239-1254, 1989.
DOI : 10.1016/0020-7683(89)90088-7

C. A. Stuart, Radially symmetric cavitation for hyperelastic materials, Analyse non linéaire, pp.34-65, 1985.
DOI : 10.1016/S0294-1449(16)30411-5
URL : http://archive.numdam.org/article/AIHPC_1985__2_1_33_0.pdf

C. O. Horgan and T. J. Pence, Void nucleation in tensile dead-loading of a composite incompressible nonlinearly elastic sphere, Journal of Elasticity, vol.18, issue.1, pp.61-82, 1989.
DOI : 10.1007/BF00040934

H. S. Hou and R. Abeyaratne, Cavitation in elastic and elastic-plastic solids, J. Mech. Phys. Solids, pp.571-592, 1992.

G. J. Lake and P. B. Lindley, Ozone cracking, flex cracking and fatigue of rubber, Rubber Journal, 1964.

G. J. Lake, Fatigue and Fracture of Elastomers, Rubber Chemistry and Technology, vol.68, issue.3, pp.435-458, 1995.
DOI : 10.5254/1.3538750

G. J. Lake and P. B. Lindley, The mechanical fatigue limit for rubber, Journal of Applied Polymer Science, vol.9, issue.4, pp.1233-1251, 1965.
DOI : 10.1002/app.1965.070090405

N. André, Critère local d'amorçage de fissures en fatigue dans unélastomèreunélastomère de type nr, Thèse Ecole Nationale Supérieure des Mines de Paris, 1998.

W. N. Hess and K. A. Burgess, Reagglomeration as a Cause of Tread Groove Cracking, Rubber Chemistry and Technology, vol.36, issue.3, p.754, 1963.
DOI : 10.5254/1.3539607

R. W. Smith and A. L. Black, Service-Induced Diffusion and Nodule Formation in Rubber Stocks, Rubber Chemistry and Technology, vol.37, issue.2, p.338, 1964.
DOI : 10.5254/1.3540325

G. R. Hamed, Energy dissipation and the fracture of rubber vulcanizates Micromechanics of fracture in elastomers, Rubber Chem. Technol. J. of Mat. Sci, vol.64, issue.19, pp.4933612-3619, 1984.

G. and M. Borret, Sur la propagation de fissure dans lesélastomèreslesélastomères, 1999.

S. M. Cadwell, R. A. Merrill, C. M. Sloman, and F. L. Yost, Dynamic fatigue life of rubber, Industrial and engineering chemistry, vol.12, pp.19-23, 1940.

J. R. White, Fractography of rubbery materials, chapter Methods of investigation of surface damage. Elsvier, 1991.

B. Hadj and H. , Endommagement et fissuration en fluage depolyéthyì ene extrudés : Approche locale -approche globale, 2000.

.. Validité-d-'une-loi-de-comportement-unique-en-fatigue, 126 IV.3.4 Comparaisons des déformées : formation des plis aux fortes compressions . . . 128 IV.3.5 Conclusions sur l'identification, pp.129-133

A. Robisson, Comportement visco-hyperélastique endommageable d'´ elastomères SBR et PU : Prévision de la durée de vie en fatigue, Thèse, Ecole Nationale Supérieure des Mines de Paris, 2000.

P. J. Flory, Rubber Elasticity. Principles of polymer chemistry, pp.432-493, 1953.

B. Arruda, A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials, Journal of the Mechanics and Physics of Solids, vol.41, issue.2, pp.389-412, 1993.
DOI : 10.1016/0022-5096(93)90013-6
URL : https://hal.archives-ouvertes.fr/hal-01390807

N. André, Critère local d'amorçage de fissures en fatigue dans unélastomèreunélastomère de type nr, Thèse Ecole Nationale Supérieure des Mines de Paris, 1998.

F. Laraba, Etude des comportements hyperélastique et viscohyperélastique de deuxélastomèresdeuxélastomères par extensométrie optique bidimensionnelle, Thèse Ecole Centrale Paris, 1998.

D. W. Haines and W. D. Wilson, Strain-energy density function for rubberlike materials, Journal of the Mechanics and Physics of Solids, vol.27, issue.4, pp.345-360, 1979.
DOI : 10.1016/0022-5096(79)90034-6

G. Cailletaud and P. Pilvin, Identification and inverse problems: a modular approach. in Material Parameter Estimation for Modern Constitutive Equations, 1993.

P. Pilvin, Notice d'utilisation de SiDoLo,v2, 1993.

J. Besson and R. Foerch, Object?oriented programming applied to the finite element method. part i. general concepts. Revue Européenne desélémentsdeséléments finis, pp.535-566, 1998.

L. R. Herrmann, Elasticity equations for incompressible and nearly incompressible materials by a variational theorem., AIAA Journal, vol.3, issue.10, pp.1896-1900, 1965.
DOI : 10.2514/3.3277

R. Glowinski and P. Letallec, Numerical Solution of Problems in Incompressible Finite Elasticity by Augmented Lagrangian Methods II. Three-Dimensional Problems, SIAM Journal on Applied Mathematics, vol.44, issue.4, pp.710-733, 1984.
DOI : 10.1137/0144051

D. S. Malkus and T. J. Hughes, Mixed finite element methods ??? Reduced and selective integration techniques: A unification of concepts, Computer Methods in Applied Mechanics and Engineering, vol.15, issue.1, pp.63-81, 1978.
DOI : 10.1016/0045-7825(78)90005-1

M. F. Jazzar-]-r, A. G. Rivlin, and . Thomas, Modélisation du comportement hyperélastique quasi incompressible de structures acier-´ elastomères et validation expérimentale. Thèse, Université d'Aix Marseille II Rupture of rubber. part i : Characteristic energy for tearing, J. Polym. Sci, vol.10, issue.1, pp.291-318, 1953.

G. J. Lake, Fatigue and Fracture of Elastomers, Rubber Chemistry and Technology, vol.68, issue.3, pp.435-458, 1995.
DOI : 10.5254/1.3538750

P. B. Lindley, Relation between hysteresis and the dynamic crack growth resistance of natural rubber, Int. J. Frac, vol.9, pp.449-462, 1973.

J. J. Bushfield, A. G. Thomas, and M. F. Ngah, Application of fracture mechanics for the fatigue life prediction of carbon black filled elastomers, Constitutive Models for rubbers, 1999.

W. F. Busse, Tear Resistance and Structure of Rubber, Industrial & Engineering Chemistry, vol.26, issue.11, p.1194, 1934.
DOI : 10.1021/ie50299a015

S. M. Cadwell, R. A. Merrill, C. M. Sloman, and F. L. Yost, Dynamic fatigue life of rubber, Industrial and engineering chemistry, vol.12, pp.19-23, 1940.

J. R. Beatty, Fatigue of Rubber, Rubber Chemistry and Technology, vol.37, issue.5, 1964.
DOI : 10.5254/1.3540402

N. André, Critère local d'amorçage de fissures en fatigue dans unélastomèreunélastomère de type nr, Thèse Ecole Nationale Supérieure des Mines de Paris, 1998.

F. Hourlier, Communication privée, 1995.

J. H. Holland, Adaptation in Natural and Artificial Systems, 1975.

D. E. Goldberg, Algorithms in search, optimization and machin learning, 1989.

L. Dave, Handbook of genetic algorytms, 1991.

A. N. Gent and P. B. Lindley, Internal rupture of bonded rubber cylenders in tension, Proc. Roy. Soc. A, pp.195-205, 1958.

J. Besson and R. Foerch, Object?oriented programming applied to the finite element method. part i. general concepts. Revue Européenne desélémentsdeséléments finis, pp.535-566, 1998.

J. Besson and R. Foerch, Object?oriented programming applied to the finite element method. part ii. application to material behavior. Revue Européenne desélémentsdeséléments finis, pp.567-588, 1998.

. La-focalisation-n, ´ etant pas parfaite, les grilles sont souvent imparfaites et partielles

D. G. Attwood and P. M. Hazzledine, A fiducial grid for high-resolution metallography, Metallography, vol.9, issue.6
DOI : 10.1016/0026-0800(76)90016-1

L. Allais, M. Bornert, T. Brethaud, and D. Caldemaison, Experimental characterization of the local strain field in a heterogeneous elastoplastic material, Acta Metallurgica et Materialia, vol.42, issue.11, pp.3865-3880, 1994.
DOI : 10.1016/0956-7151(94)90452-9