A. E. , R. Molins, H. Ghonem, and A. Pineau, intergranular crack tip oxidation mechanism in a nickel-based superalloy, Material Science and Engineering, vol.154, p.21, 1992.

A. E. and P. Pieraggi, Oxidation-deformation interactions and effect of environment in the crack growth resistance of Ni-base superalloys, CDI'96Magnin et J.M. Gras, les Editions de Physiques, p.295, 1996.

A. T. and G. S. Was, Creep and intergranular cracking of Ni-Cr-Fe-C in 360°C argon, Metallurgical and Materials Transactions A, vol.25, pp.1169-1183, 1990.

A. T. and G. S. Was, The effect of chromium, carbon, and titanium on the oxidation of nickel-base alloys in high temperature Water, Journal of the Electrochemical Society, vol.140, issue.7, pp.1877-1883, 1993.

A. M. and H. J. Frost, Deformation-mechanism-maps : the plasticity and creep of metals and ceramics, 1982.

B. R. Van-rooyen and D. , BNL) « Stress corrosion cracking of Inconel 600 in high temperature water. An update », Congrès Corrosion Nace 83, communication n°139, avril Corrosion, vol.2, issue.425, pp.18-22, 1983.

B. R. Van-rooyen and D. , BNL) « Mechanisms of stress corrosion cracking and intergranular attack in Alloy 600 in high temperature caustic and pure water, J. Materials for Energy System, vol.7, issue.237, p.3, 1985.

B. R. Van-rooyen and D. , BNL) « Quantitative examination of stress corrosion cracking of Alloy 600 in high temperature water . Work during 1983 », EPRI workshop on primary side SCC of PWR steam generator tubing, novembre, pp.28-29, 1983.

B. P. , P. Azoubir94, . K. Birnbaum-h, and P. Sofronis, amplitude et de la vitesse des déformations plastiques sur la ségrégation de l'hydrogène dans le fer et les aciers », compte rendu de l'Académie des Sciences hydrogen enhanced localized plasticity ? a mechanism for hydrogen related fracture, Steam generator Reliability Projet, Senior Representatives Meeting, pp.1845-1848, 1951.

B. A. , S. Casadio, A. Saltelli, and G. Scibona, Susceptibility to the intergranular corrosion of Alloy 800, Corrosion, vol.37, issue.9, pp.498-505, 1981.

B. J. Bri81-]-bricknell-r and D. A. Woodford, The embrittlement of nickel following high temperature air exposure, Metallurgical Transactions A, vol.227, issue.no. 3, pp.425-433, 1981.
DOI : 10.1007/BF02648539

B. T. Van-rooyen and D. , Stress corrosion cracking of Alloy 600 using the constant strain rate test, Corrosion, vol.37, issue.597, 1981.

C. P. Ralph and B. , « Sensitization of inconel 600, Philosophical Magazine A, vol.59, issue.6, pp.1119-1136, 1989.

P. [. Combrade, M. A. Foucault, A. Gelpi, C. T. , B. Fleury et al., Crack growth rate measurments on alloy 600 steam generators tubing in primary water and hydrogenated AVT water Combrade, « An update on the influence of hydrogen on the PWSCC of nickel base alloys in high temperature water, Proc. Of the 12 th Scandinavian corrosion congress and Eurocorr'92 Proc. Of the 8 th Int. Symp. On Env. Degr. Of Mat. In Nucl. Pow. Syst-Wat. Reactors, pp.55-67, 1992.

C. J. and A. M. Brass, Interactions hydrogène with moving dislocations in nickel base alloysconsequences on the intergranular rupture, proceedings of the conference H-CDI, 2002.

C. J. and A. M. Brass, Role of temperature and strain rate on the hydrogen-induced intergranular rupture in Alloy 600, Metallurgical and materials transactions A, vol.35, pp.457-464, 2004.

C. J. and K. J. Lee, The solubility of magnetite and nickel ferrite in high temperature aqueous solutions, High temperature science, pp.51-67, 1990.

C. P. , O. Cayla, M. Foucault, D. Vancon, A. Gelpi et al., About the role of surface films on alloy 600 corrosion in high temperature dearated environments, Proceedings 3 rd International Symposium On Environmental Degradation of Material in Nuclear System-Water Reactors, 1987.

C. D. and G. S. Was, The role of grain boundary misorientation in intergranular cracking of Ni-16Cr-9Fe in 360°C Argon and high-purity water, Metallurgica transactions, vol.23, p.1195, 1992.

E. G. Jacko, R. J. Begley, J. A. Pement, and F. W. , Westinghouse) " influence of hydrogen partial pressure on the IGSCC behaviour of Alloy 600 tubing in 360°C water or 400°C steam, Congrès Corrosion Nace Corrosion, vol.87, issue.727, pp.9-13, 1987.

[. Alvarez, J. L. , A. H. Harveyfoc99, F. F. For82-], and F. F. , Henry's Constants and vapor?liquid distribution constants for gaseous solutes in H 2 O and D 2 O at high temperatures Mécanismes de la CSC de l'Alliage 600 monocristallin et polycristallin en milieu primaire: rôle de l'hydrogène dans le fer et les aciers Mechanism of environmental cracking in systems peculiar to the power generation industry Current understanding of the mechanism of stress corrosion and corrosion fatigue in environment sensitive fracture : evaluation and comparison of test methods Slip dissolution model, thèse, Ecole des Mines de Saint-Etienne, pp.903-91622, 1982.

G. T. , P. Scott, S. M. Bruemmer, and L. E. Thomas, « internal oxidation as a mechanism for steam generator tube degradation, Proceedings 3 rd International Steam Generator and Heat Exchanger Conference, p.389, 1998.

G. C. Raquet, O. Duisabeau, L. Turluer, and G. , Effect of cycling loadings on the stress corrosion crack growth rate in Alloy 600 in PWR primary water, pp.12-16, 2004.

H. J. , A. Mc-ilree, and R. Pathania, Materials Reliability Program (MRP) : Crack Growth Rates for Evaluating Primary Water Stress Corrosion Cracking (PWSCC) of Thick-Wall Alloy 600

H. A. , S. C. Tsaï, J. Balmain, K. Messaoudi, B. Lesage et al., Atomic transport in Cr 2 O 3 and Al 2 O 3 scales: growth mechanism and effect of yttrium, Materials science Forum, pp.251-254, 1997.

K. O. , O. Kubaschewski, K. Hesselmann, . O. Spinger-verlag-ed, and . Knacke, Thermochemical properties of Inorganic substances, LEC97] LECOESTER F. « Interactions hydrogène-Alliage, 1991.

L. P. , G. Palumbo, U. Erb, and K. T. , Aust, « influence of grain boundary character distribution on sensitisation and integranular corrosion of alloy 600, Scripta Metallurgica and Materiala, vol.33, pp.9-1397, 1995.

[. and J. M. Titchmarsh, TEM investigations of intergranular stress corrosion cracking in austenitic alloys in PWR environmental conditions, Materials at hight temperatures, vol.20, issue.4, pp.573-579, 2003.

M. T. , R. Chierragatti, and R. Oltra, « Mechanism of brittle fracture in a ductile 316 alloy during stress corrosion, Acta Metallurgica, vol.38, p.71313, 1990.

M. T. , F. Foct, and O. De-bouvier, hydrogen effects on PWR SCC Mechanisms in Monocrystalline Alloy 600, Proc. Of the Ninth International Symposium on Environmental Degradation of Material in Nuclear Power System-Water Reactors, p.27, 1999.

N. K. , B. Rosborg, and J. Engstrom, Influence of LiOH and H 2 on primary side IGSCC of alloy 600 steam generator tubes, Equilibrium aspects of hydrogen-induced cracking of steels », Acta metallurgica, p.1065, 1974.

P. G. , P. J. King, K. T. Aust, U. Erb, and P. C. Lichtenberger, Grain boundary design and control for intergranular stress corrosion resistance, Scripta Metallurgica, vol.25, p.1775, 1991.

P. Y. , B. L. Adams, T. Olson, and N. Panayotou, Grain boundary structure effects on intergranular stress corrosion cracking of Alloy X-750, Acta Metallurgica, vol.44, pp.4685-4695, 1996.

P. S. Mcintyre and P. «. , Influence of grain boundary microstructure on susceptibility of Alloy 600 to intergranular attack and stress corrosion cracking» NACE) [PER04] PERUSIN S. « conséquences de l'oxydation haute température sur l'injection de défauts et le comportement mécanique des matériaux métalliques » thèse, INP Toulouse « The lowering of fracture-stress due to surface adsorption », philosophical Magazine, p.331, 1956.

P. J. , A. Vignes, Y. Brechet, P. Combrade, P. D. Métallurgie-du-minerai-au-matériaupru76-] et al., Geometrical speciality and special properties of grain boundaries », revue Phys Diffusion of chromium in Inconel-600 Effect of temperature and cold work growth rate in alloy 600 in lithiated + borated water at hight temperature, PRO88] Proceedings 1987 EPRI Workshop on mechanisms of primary water intergranular stress corrosion cracking th International Symposium on environmental degradation of materials in nuclear power systems-water reactors, pp.419-206, 1976.

R. M. , O. Menet, P. Pitner, and T. , RIFFARD (EDF), « Influence of various chemical factors on corrosion risk of Alloy 600 ième source : EPRI- EDF-CEA-FRAMATOME meeting, 1988.

D. [. Duquette, Formation kinetics and rupture strain of Ni-Cr-Fe alloy corrosion films formed in high temperature water, Metallurgical an Materials transactions, p.3015, 2001.

S. M. , G. S. Smith, and R. C. Newman, « Testing the film-induced cleavage model of stress corrosion cracking, Corrosion Science, vol.35, pp.411-417, 1993.

S. [. Document, P. E. Doherty, D. M. Doyle, and G. Palumbo, the influence of manufacturing processes and SCC behaviour of alloy 690 steam generator tubing, 1995.

S. P. and M. L. Calvar, Some possible mechanisms of intergranular stress corrosion cracking of alloy 600 in PWR primary water, th Int. Symposium on environmental degradation of materials in nuclear power system-water reactors, 1993.

S. P. and M. L. Calvar, On the role of oxygen in stress corrosion cracking as a function of temperature " CDI " 96, Magnin et J.M. Gras, p.384, 1996.

S. Y. and P. G. Shewmon, Intergranular stress corrosion cracking of alloy 600 and X-750 in high temperature deaerated water/steam, Metallurgical Transactions A, vol.22, pp.1857-1864, 1977.

S. E. Helgeson and H. C. , Calculation of the thermodynamic and transport properties of aqueous species at high pressures and temperatures: Correlation algorithms for ionic species and equation of state predictions to 5 kb and 1000°C, Geochimica et Cosmochimica Acta, vol.52, pp.2009-2036, 1988.

S. E. Helgeson, H. C. Sverjensky, D. A. Sieradski-k, and R. C. Newman, Calculation of the thermodynamic and transport properties of aqueous species at high pressures and temperatures: Standard partial molal properties of inorganic neutral species, brittle behaviour of ductile metals during stress corrosion cracking, pp.2157-2183, 1985.

S. C. , P. Combrade, M. Foucault, A. Gelpi, and T. Magnin, A parametric study of PWSCC of alloy 600, Eurocorr 98: Solutions to corrosion problems, 1998.

S. C. , M. Foucault, P. Combrade, K. Wolski, and T. Magnin, PWSCC of alloy 600: a parametric study of surface film effects, Proceeding of Ninth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems -Water Reactors, 1999.

. [. Sta99-]-staehle-r and . Fang-z, Stress corrosion cracking of the Fe-Cr-Ni alloy system " , the theory of the stress corrosion cracking in alloys « Comments on a proposed mechanism of internal oxidation for alloy 600 as applied to low potential SCC, Proc. 9th Internationnal symposium on environmental degradation of materials in nuclear power systems-water reactors, p.69, 1971.

S. J. , J. W. Jones, and G. S. Was, Effect of carbon on the low-temperature creep behaviour of Ni-16Cr-9Fe Oxide films formed on alloy 600 in lithiated water at 25°C to 350°C, Metallurgical Transactions A Corrosion, vol.23, issue.10, pp.1033-1037, 1990.

T. V. , G. S. Was-]-theus-g, and R. H. Emanuelson, The role of coincidence-Site-Lattice Boundaries in creep of alloy Ni-16Cr-9Fe at 360°C Stress corrosion cracking of Alloy 600, Metallurgical Transaction, vol.28, issue.THE83, p.2101, 1997.

T. L. , S. M. Bruemmer, and . High, Resolution Characterization of Intergranular Attack and Stress Corrosion Cracking of Alloy 600 in High-Temperature Primary Water, 2000.

T. L. , B. Jonhson, S. M. Bruemmer, E. N. Totsuka, G. Lunarska et al., Preliminary Examinations of Alloy 600 IGSCC from PWR Primary-Water Service: Sulfur at Crack tips Skzlarska-smialowska A sensitive technique for evaluating susceptibility to IGSCC of alloy 600 in high temperature water, -smialowska « Hydrogen induced IGSCC of Ni-containing FCC alloys in high temperature water » 3 rd Int. Symposium on environmental degradation of materials in nuclear power system-water reactors, Traverse City, pp.571-691, 1987.

T. S. , A. M. Huntz, and C. Dolin, Growth mechanism of Cr 2 O 3 scales: oxygen and chromium diffusion, oxidation kinetics and effect of yttrium, Materials science and engineering, A212, pp.6-13, 1996.

V. F. and S. Lehong, Evaluation des vitesses de propagation en milieu primaire de matériaux traverses de cuve en alliage 600 et de métaux deposes en alliage 182 », Note EDF HT- 44, 1997.

V. F. , J. D. Mithieux, O. De-bouvier, D. Vancon, and G. Zacharie, «Influence of chromium content and microstructure an creep an PWSCC resistance of nickel base alloys, Proceedings 9 th Symposium on environmental degradation of materials in nuclear power system, 1999.

V. F. Ph and . Moulart, Evaluation en laboratoire des vitesses de propagation par corrosion sous contrainte en milieu primaire de matériaux massifs en alliage 600, 2002.

W. W. Cooper, J. R. Dittmann, A. Kijima, J. Kretzschmar, H. J. Kruse et al., The IAPWS Industrial formulation 1997 for the thermodynamic properties of water and steam, Journal of engineering for gas turbines and power, pp.150-182, 2000.

W. G. and R. M. Kruger, A thermodynamic and kinetic basis for understanding chromium depletion in Ni-Cr-Fe alloys, Acta metallurgica, vol.33, issue.5, pp.841-854, 1985.

W. G. , T. M. Angeliu, and J. K. , Sung, « Deformation and intergranular cracking behavior of Ni- Cr-Fe alloys at high temperature, Proceedings of an EPRI Airlie Workshop, 1993.

W. G. , J. L. Hertzberg, and V. Thaveeprungsriporn, Effect of grain boundary composition and structure on IGSCC of Alloy 600 " , Control of corrosion on the secondary side of stream generators, NACE, 1996.

W. G. , D. J. Paraventi, and J. L. Hertzberg, « Mechanism of environmentaly-enhanced deformation and intergranular cracking of Ni-16Cr-9Fe, Corrosion-Deformation Interactions CDI'96, pp.410-420, 1996.

W. D. and R. H. Bricknell, « Embrittlement of high temperature alloys by oxygen », treatise on material science and technology, p.157, 1983.

Y. F. Roy and G. Faulkner, Model predictions of grain boundary chromium depletion in Inconel 690, Transactions of the American Institute of Mining and Metallurgical Engineers, pp.2177-2197255, 1941.