N. Barton, Review of a new shear strength criterion for rock joints. Engineering Geology, pp.287-332, 1973.

N. Barton, R. Lien, and J. Et-lunde, Engineering classification of rock masses for the design of tunnel support, Rock Mechanics Felsmechanik M???canique des Roches, vol.1, issue.1, pp.189-236, 1974.
DOI : 10.1007/BF01239496

N. R. Barton-]-barton, The shear strength of rock and rock joints, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.13, issue.9, pp.1-24, 1976.
DOI : 10.1016/0148-9062(76)90003-6

N. R. Baton and V. Et-choubey, The shear strength of rock joints in theory and practice, Rock Mechanics Felsmechanik M???canique des Roches, vol.4, issue.A, pp.1-54, 1977.
DOI : 10.1007/BF01261801

N. R. Barton and S. C. Et-bandis, Effect of block size on the behavior of jointed rock, Proc. 23th U.S. Symp. on rock mechanics pp, pp.739-760, 1982.

N. Barton, S. Bandis, and K. Et-bakhtar, Strength, deformation and conductivity coupling of rock joints, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.22, issue.3, 1985.
DOI : 10.1016/0148-9062(85)93227-9

N. Barton and S. Et-bandis, Review of predictive capabilities of JRC-JCS model in engineering practice, International Symposium on Rock Joints, Loen, pp.4-6, 1990.

N. Barton-]-barton, TBM tunneling in jointed and faulted rock, 2000.

N. Barton, Some new Q-value correlations to assist in site characterisation and tunnel design, International Journal of Rock Mechanics and Mining Sciences, vol.39, issue.2, pp.185-216, 2002.
DOI : 10.1016/S1365-1609(02)00011-4

A. Bekaert and S. Et-maghous, Three dimensional yield strength properties of jointed rock mass as homogeniesed medium, Mechanic of Cohesive Frictional Materials, pp.1-24, 1996.

Z. T. Bieniawski, Engineering classification of jointed rock masses, Trans. S. Afr. Instn Civ. Engrs, vol.15, pp.12-335, 1973.

Z. T. Bieniawski, Engineering classification in rock engineering, Proceedings of the symposium on exploratoin for Rock Engineering, pp.97-106, 1976.

M. Chalhoub and A. Et-pouya, A geometrical approach to estimate the mechanical REV of a fractured rock mass, First Euro Mediterranean in Advances on Geomaterials and Structures ? Hammamet 3-5 May Tunisia, pp.663-670, 2006.

S. O. Choi and S. Chung, Stability analysis of jointed rock slopes with the barton-bandis constitutive model in udec, CD-ROM, 2004.
DOI : 10.1016/j.ijrmms.2004.03.103

F. Coste, Comportement thermo-hydro-mécanique des massifs rocheux fracturés, Thèse de l'Ecole Nationale des Ponts et Chaussées, 1997.

P. A. Cundall-]-cundall, A computer model for simulation progress , large scale movements in blocky systems, In Int. Symp. On Rock Fracture, I.S.R.M, 1971.

P. A. Cundall-]-cundall, UDEC -a generalized distinct element program for modeling jointed rock, 1980.

P. A. Cundall-]-cundall, Numerical experiments on rough joints in shear using a bonded particle model, Aspects of tectonic faulting, pp.1-9, 2000.
DOI : 10.1007/978-3-642-59617-9_1

D. U. Deere, Technical description of rock cores for engineering purposes. Rock mechanics and rock engineering, vol1, pp.17-22, 1964.

W. S. Dershowitz, Rock fracture systems, 1984.

E. Detournay, The interaction of deformation and hydraulic conductivity in rock fracture. An experimental and analytical study, improved stress determination procedures by hydraulic fracturing, 1979.

J. M. Duncan and C. Y. Chang, Non-linear analysis of stress and strain in soils, Proc. A. Soc. civ. Engrs 96(SM5), pp.1629-1653, 1970.

S. Gentier and J. Riss, Quantitative description and modelling of joints morphology, International Symposium on Rock Joints, pp.4-6, 1990.

R. K. Goel, J. L. Jethwa, and A. G. Et-paithankar, Correlation between Barton's Q and Bieniawski's RMR???A new approach, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.33, issue.2, pp.179-181, 1995.
DOI : 10.1016/0148-9062(95)00057-7

R. E. Goodman, R. L. Taylor, and T. Brekke, A model for the mechanics of jointed rock, J. Soil Mech. Fdns Div., Pro. Am. Soc. Civ. Engrgs, vol.94, issue.SM3, pp.637-659, 1968.

R. E. Goodman and J. Dubois, Duplication of dilatancy in analysis of jointed rocks, Proc. A. Soc. civ. Engrs 98, pp.399-423, 1972.

R. E. Goodman, The mechanical properties of joints, Proc. 3rd Cong. ISRM, Denver, pp.127-140, 1974.

R. E. Goodman, Methods of Geological Engineering in Discontinuous Rock, p.472, 1976.

R. E. Goodman and C. Et-saint-john, Finite element analysis for discontinuous rocks, Numerical Methods in Geotechnical Engineering, 1977.

R. E. Goodman and G. H. Shi, Block theory and its application to rock engineering, 1985.

R. E. Goodman, Introduction to Rock mechanics, 1989.

H. Gray, Stress distribution in elastic soils, Proc. Of First Int. Cong. Soil Mech, vol.2, pp.15-169206, 1936.

R. Hart, Enhancing rock stress understanding through numerical analysis, International Journal of Rock Mechanics and Mining Sciences, vol.40, issue.7-8, pp.1089-1097, 2003.
DOI : 10.1016/S1365-1609(03)00116-3

E. Hoek and J. W. Et-bray, Rock slope enginering, 1977.

E. Hoek and E. T. Et-brown, Empirical strength criterion for rock masses, J. Geotech. Engng. Div. Am. Soc. Civ. Engrs, vol.106, pp.9-1013, 1980.

E. Hoek and E. Et-brown, Practical estimates of rock mass strength, International Journal of Rock Mechanics and Mining Sciences, vol.34, issue.8, pp.1165-86, 1997.
DOI : 10.1016/S1365-1609(97)80069-X

E. Hoek and M. S. Et-diederichs, Empirical estimation of rock mass modulus, International Journal of Rock Mechanics and Mining Sciences, vol.43, issue.2, pp.203-215, 2006.
DOI : 10.1016/j.ijrmms.2005.06.005

K. D. Howing and H. K. Et-kutter, Time dependent shear deformation of filled rock joints, Proc. Int. Symp. On Fundamentals of rock joints, pp.113-122, 1985.

C. Huet, Coupled size and boundary-condition effects in viscoelastic heterogeneous and composite bodies, Mechanics of Materials, vol.31, issue.12, pp.787-829, 1999.
DOI : 10.1016/S0167-6636(99)00038-1

I. Isrm, ISRM (Internatioanl Society of Rock Mechanics) (1978) Suggested methods for the quatative description of discontinuities in rock masses, Int. J. Rock. Mech. Min. Sci. Geomech. Abstr, vol.15, pp.319-368, 1978.

M. Romana, J. Séron, and E. Et-montalar, 2003-a) SMR Geomechanics, experience and validation. ISRM 2003- Technology roadmap for rock mechanics

C. Scavia, G. Barla, and V. Et-bernaudo, Probabilistic stability analysis of block toppling failure in rock slopes, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.27, issue.6, 1990.
DOI : 10.1016/0148-9062(90)90999-I

. Shehata, In fundamental considerations on the hydraulic characteristics of joints in rocks, Proc. Symp. On Percolation Through Fissured Rock. Paper No. T1-F, p.206, 1972.

B. Singh and R. K. Et-goel, Rock mass classification ? A practical approach in civil engineering, 1999.

T. Tahiri-tahiri and A. , 1992-a) Modélisation des massifs rocheux fracturés par la méthode des éléments distincts, 1992.

. Tahiri, Tahiri A. (1992-b) BriG3D, Manuel Technique de référence, 1992.

I. Tsukrov and B. Et-kachanov, Effective moduli of an anisotropic material with elliptical holes of arbitrary orientational distribution, International Journal of Solids and Structures, vol.37, issue.41, pp.5919-5941, 2000.
DOI : 10.1016/S0020-7683(99)00244-9

N. Turk, M. G. Grieg, and W. R. Et-dearman, Characterisation of rock joints surfaces by fractal dimension, Proc. 28 th U.S. Rock Mech. Symp, pp.1223-1236, 1987.

P. M. Warburton, Vector stability analysis of an arbitrary polyhedral rock block with any number of free faces, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.18, issue.5, pp.415-427, 1981.
DOI : 10.1016/0148-9062(81)90005-X

Z. Q. Wei, P. Egger, and F. Et-descoeudres, Permeability predictions for jointed rock masses, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.32, issue.3, 1995.
DOI : 10.1016/0148-9062(94)00034-Z

R. Yoshinaka and T. Et-yamabe, 3. Joint stiffness and the deformation behaviour of discontinuous rock, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.23, issue.1, pp.19-28, 1986.
DOI : 10.1016/0148-9062(86)91663-3

J. Zhao, Joint surface matching and shear strength, Int. J. Rock. Mech, 1997.

O. C. Zienkiewicz, La méthode des éléments finis appliquée à l'art de l'ingénieur, 1973.