C. C. Chan, The State of the Art of Electric, Hybrid, and Fuel Cell Vehicles, Proc. of the IEEE, pp.704-718, 2007.
DOI : 10.1109/JPROC.2007.892489

M. Ehsani, Y. Gao, S. E. Gay, and A. Emadi, Modern Electric, Hybrid Electric, and Fuel Cell Vehicles, 2005.
DOI : 10.1201/9781420037739

V. Wouk, Hybrids: then and now, IEEE Spectrum, vol.32, issue.7, pp.16-21, 1995.
DOI : 10.1109/6.392796

R. Trigui and F. Badin, Hybrid light duty vehicle evaluation program, International Journal of Automotive Technology, vol.4, issue.2, pp.65-66, 2003.

I. Boldea, Starter/Alternator Systems for HEV and Their Control: A Review, KIEE International Transactions on Electrical Machinery and Energy Conversion Systems, vol.4, issue.4, pp.157-169, 2004.

D. Richard and Y. , Valeo StARS Technology: A Competitive Solution for Hybridization, 2007 Power Conversion Conference, Nagoya, pp.1601-1605, 2007.
DOI : 10.1109/PCCON.2007.373178

J. M. Dubus, P. Masson, and C. Plasse, « Les systèmes Alterno-Démarreurs réversibles Valeo », dossier « les véhicules propres, Société de l'électricité, de l'électronique et des Technologies de l'Information et de la Communication (SEE), p.10, 2004.

K. Cogo, J. M. Dubus, and C. Plasse, The Valeo belt driven starter alternator reversible systems, congrès Alternatives Energétiques dans l'Automobile (AEA), pp.44-49, 2004.

]. F. Chabour, J. P. Vilain, P. Masson, L. Kobylanski, P. P. Macret-]-c et al., Sensorless induction machine based integrated starter alternator for the 42 V powernet for automobiles An integrated starter alternator for the 42 V PowerNet 42V Integrated Starter/Alternator SystemsPolyphase stator of a rotating electrical machine with claw-pole rotor and alternator or alternator starter comprising same [16] F. Scuiller, « Développement d'outils de conception de machines polyphasées à aimants utilisant l'approche multimachine [17] F. Locment, « Conception et modélisation d'une machine synchrone à 7 phases à aimants permanents et flux axial : commande vectorielle en modes normal et dégradé, Sept. 2005. [12] IEEE International Conference on Power Electronics and Drive Systems PEDS 2003 Outils et méthodologie d'étude des systèmes électriques polyphasés. Généralisation de la méthode des vecteurs d'espace. », thèse de doctorat Modélisation vectorielle multimachines pour la commande des ensembles Convertisseur-Machine polyphasés International Conference on Electrical Machines ICEM200621] P. Degobert, « Automobile et pollution », éditions Technip, pp.479-486, 1992.

J. Hansen, European Environment Agency Greenhouse gas emission trends and projections in Europe [25] U.S. Environmental Protection Agency Inventory of U.S. Greenhouse Gas Emissions and Sinks Carbon dioxide emissions from fossil-fuel use, 1751-1950, GISS analysis of surface temperature change EEA report No 9, p.759, 1990.

J. M. Miller, Propulsion Systems for Hybrid Vehicles Institution of electrical Engineers (IEE) publication, ISBN: 0-86341-336-6 Vehicular Electric Power Systems, 2004.

M. John, A. Miller-chan, K. Bouscayrol, ]. K. Chen37, A. Chen et al., Propulsion Systems for Hybrid Vehicles The second century of electric and hybrid vehicles Electric, Hybrid and fuel cell vehicles: Architectures, Modeling, Energy managementPhilosophy of Engineering and Modelling of Electric Machines Drives Global modeling of different Vehicles Using Energetic Macroscopic Representation MEGEVH project: graphical modeling for energy management of hybrid electric vehicles Comparison and review of electric machines for integrated starter alternator applications Commande optimale d'un alterno-démarreur intégré asynchrone Optimisation de la mise en oeuvre d'une commande pour un alterno-démarreur intégré Design and testing of a Belt-Driven Induction Starter-Generator Induction motor drive system for the Visteon Integrated Starter-Alternator A switched reluctance machine for a car starter-alternator, Gestion d'énergie de véhicules électriques hybrides basée sur la Représentation Énergétique Macroscopique International Conference on Electrical Machines and Systems ICEMS'08, Wuhan (China) Propulsion Conference revue internationale de genie électrique Industrial Electronics Conference Electric Machines and Drives Conference. [46] L. Albert, « Modélisation et optimisation des alternateurs à griffes, pp.0-86341, 1984.

D. C. White, H. H. Woodson, E. Levi, R. Bojoi, F. Profumo et al., Electromechanical Energy Conversion Multiphase induction motor drives- A technology status review Preliminary investigation of an inverter-fed 5-phase induction motor High Torque Dense Naval Propulsion Motors Pulsating torque and losses in multiphase induction machines Fault tolerance in multiphase propulsion motors Multi-inverter PWM control: a new generation drives for cruise ship electric propulsion Five-phase permanent magnet motor drives for ship propulsion applications Comparison of two 5-phase Permanent Magnet machine winding configurations. Application on naval propulsion specifications The Analysis of Losses in High-Power Fault-Tolerant Machines for Aerospace Applications Fault-tolerant control architecture for an electrical actuator, IEEE International Conference on Electrical Machine and Drive (IEMDC'03) European Power Electronics Conference, EPE'03 Electric Ship Technologies Symposium International Electric Machines and Drives Conference, IEMDC'07, pp.489-516, 1959.

D. Sewell, A. G. Cudley, B. C. Jack, J. Mecrow, J. Haylock et al., A Comparative Study of Permanent Magnet and Switched Reluctance Motors for High-Performance Fault-Tolerant Applications [60] I. Moir, A. Seabridge Aircraft Systems ? Mechanical, electrical, and avionics subsystems integration Wiley and Sons Aerospace Series Multi-Star PM brushless DC motor for traction applications Comparison of 3-, 5-, and 6-Phase Machines For Automotive Charging Applications, International Electric Machines and Drives Conference, IEMDC'05 European Power Electronics conference, EPE'03 International Electric Machines and Drives Conference, IEMDC'03 Comparison of 3-, 5-and 7-leg Voltage Source Inverters for low voltage applications IEEE International Electric Machines and Drives Conference, pp.41-47, 1996.

J. F. Gieras, C. Wang, and J. C. Lai, Noise of Polyphase Electric Motors, 2006.
DOI : 10.1201/9781420027730

]. S. Brisset, D. Vizireanu, P. Brochet, M. A. Shamsi-nejad, S. Pierfederici et al., The study of double-star synchronous machine in normal mode and the control strategy in degraded mode Decoupling algorithm in view of multivariable electrical drives control Benkhoris, « Commande d'une machine synchrone double étoile, alimentée par onduleurs MLI, modélisation, simulation et prototype expérimentalStudy and simulation of magnetically coupled multi stator induction machine supplied by independent three phase voltage-source inverters High phase order induction motors Part I and IIHarmonic filters for six-phase and other multiphases motors on voltage source inverters, Flux PM synchronous generator with concentrated winding for direct-drive wind turbine Electrimacs'99, pp.707-715, 1983.

]. A. Bouscayrol, X. Guillaud, J. P. Hautier, P. Delarue, A. Boucayrol et al., Macromodélisation pour les conversions électromécaniques : application à la commande des machines électriques Teaching drive control using Energetic Macroscopic Representation -initiation levelFormalismes de représentation et de commande des systèmes électromécaniques multimachines multiconvertisseurs, HDR de l'Université de Sciences et Technologies de Lille, 22 décembre 2003. -158 - [77] A. Bouscayrol, B. Davat, B. de Fornel, B. François, J. P. Hautier, F. Meibody-Tabar, M, pp.257-282, 2000.

A. David, P. Bouscayrol, and . Delarue, Simplifications of the Maximum Control Structure of a wind energy conversion system with an induction generator, Multimachine Multiconverter System: application for electromechanical drives, pp.131-147, 2000.

E. Lemaire-semail and . Semail, Inversion-based control of electromechanical systems using causal graphical descriptions, Bouscayrol, B. Davat, B. de Fornel, B. François, J. P, 2006.
URL : https://hal.archives-ouvertes.fr/hal-01109564

M. Monmasson, H. Pietrzak-david, E. Razik, M. F. Semail, G. Benkhoris et al., Control Structures for Multimachine Multi-converter Systems with upstream coupling Numerical Calculation, Simulation and Design Optimisation of Claw Pole Alternators for Automotive Application Some methods to evaluate leakage inductances of a claw pole Machine Numerical Procedures for the Calculation and Design of Automotive Alternators, IEE Colloquium on machines for Automotive Applications Three Dimensionnal Computation of a Claw-Pole Synchronous Machine Performances », ICEM'94 Advanced Computer Techniques in Applied Electromagnetics, S. Wiak et al. Editions Traité EGEM, série Génie électrique. Hermès sciences publications, pp.261-270, 1996.

J. R. Jr and T. Miller, Design of brushless permanent-Magnet motors Design of Small Electrical Machines, 1994.

I. Boldea and K. C. Chang, Variable Speed Generators Use of Stator Winding Taps for Flux Sensing in Induction Machines, Master of Science, vol.93, issue.2, 1984.

H. A. Toliyat, T. A. Lipo, and J. C. White, Analysis of a concentrated winding induction machine for adjustable speed drive applications. I. Motor analysis, IEEE Transactions on Energy Conversion, vol.6, issue.4, pp.679-683, 1991.
DOI : 10.1109/60.103641

H. A. Toliyat, T. A. Lipo, J. C. White-]-g, J. Joksimovic, N. Penman et al., Analysis of a concentrated winding induction machine for adjustable speed drive applications Part 2 (motor design and performance) Dynamic simulation of dynamic eccentricity in induction machines-winding function approach A method for dynamic simulation of air-gap eccentricity in induction machines Extension of winding function theory for nonuniform air gap in electric machinery Design considerations for fractional-slot winding configurations of synchronous machines, Alternateurs synchrones de grande puissance (partie 1) », Les Techniques de l'Ingénieur, traité 301, pp.684-692, 1991.

C. Schulte, C. Kaehler, G. Schlensok, and . Henneberger, Combined anlytical and numerical computation approach for design and optimisation of six-phase claw-pole alternators, Science, Measurement and Technology IEE Proceedings ?, vol.151, issue.6, pp.96-498, 2004.

G. Henneberger, S. Küppers, and I. Ramesohi, Numerical calculation, simulation and design optimisation of claw pole alternators for automotive application, IEE Colloquium on Machines for Automotive Applications, pp.3-4, 1996.
DOI : 10.1049/ic:19960939

M. Hecquet, « Contribution à la modélisation des systèmes électrotechniques par la méthode des schémas équivalents magnétiques. Application à l'alternateur automobile, 1995.

G. Meunier, « Modèles et formulations en électromagnétisme », Traité EGEM, série Génie électrique : électromagnétisme et éléments finis 2, Lavoisier librairie, pp.2-7462, 2002.

T. Henneron, « Contribution à la prise en compte des Grandeurs Globales dans les Problèmes d'Electromagnétisme résolus avec la Méthode des Eléments Finis, 2004.

K. M. Rahman and S. Hiti, Identification of machine parameters of a synchronous motor, 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003., pp.557-565, 2005.
DOI : 10.1109/IAS.2003.1257533

B. Nahid-mobarakeh, B. , F. Meibody-tabar, F. , and F. Sargos, On-line identification of PMSM electrical parameters based on decoupling control, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248), pp.266-273, 2001.
DOI : 10.1109/IAS.2001.955421

D. A. Khaburi and M. Shahnazari, Parameters identification of permanent magnet synchronous machine in vector control, Power Electronics and Applications European Conference, EPE'03, 2003.

L. Liu and D. A. Cartes, Synchronisation based adaptive parameter identification for permanent magnet synchronous motors, IET Control Theory & Applications, vol.1, issue.4, pp.1015-1022, 2007.
DOI : 10.1049/iet-cta:20060065

M. Hasni, O. Touhami, R. Ibtiouen, M. Fadel, and S. Caux, Synchronous machine parameter identification by various excitation signals, Electrical Engineering, vol.15, issue.2, pp.219-228, 2008.
DOI : 10.1007/s00202-007-0069-z

A. Bruyere, E. Semail, F. Locment, A. Bouscayrol, J. Dubus et al., Identification of sensitive R-L parameters of a multiphase drive by a vector control, 2008 IEEE Power Electronics Specialists Conference, pp.6-2008
DOI : 10.1109/PESC.2008.4592320
URL : https://hal.archives-ouvertes.fr/hal-01107782

A. Bruyère, T. Henneron, F. Locment, E. Semail, A. Bouscayrol et al., Identification of a 7-phase claw-pole starter-alternator for a micro-hybrid automotive application, 2008 18th International Conference on Electrical Machines, pp.9-2008
DOI : 10.1109/ICELMACH.2008.4800046

A. Bruyere, E. Semail, A. Bouscayrol, F. Locment, J. Dubus et al., Modeling and Control of a 7-phase Claw-pole Starter-alternator for a Micro-hybrid Automotive Application, IEEE Vehicle Power and Propulsion Conference (VPPC'08), pp.9-2008

G. Lacombe, A. Foggia, Y. Marechal, X. Brunotte, and P. Wendling, From General Finite-Element Simulation Software to Engineering-Focused Software: Example for Brushless Permanent Magnet Motors Design, IEEE Transactions on Magnetics, vol.43, issue.4, pp.1657-1660, 2007.
DOI : 10.1109/TMAG.2007.892495
URL : https://hal.archives-ouvertes.fr/hal-00283346

G. Sturtzer and E. Smigiel, « Modélisation et commande des moteurs triphasés ; commande vectorielle des moteurs synchrones, commande numérique par contrôleurs DSP, pp.7-2000

G. Sturtzer, Modèle inverse et réduction de l'ondulation de couple pour machines synchrones déduits des courbes isocouples. Extension de la transformation de Park pour moteurs synchrones à pôles saillants non sinusoïdaux et saturés, 2001.