R. Faciès-de, 213 10.2.2 Essais interrompus à 0°C et 3 mm, p.219

.. Etude-de-l-'endommagement-du, aged P20 EPR" par rétro-diffusion cohérente, p.221

E. H. Andrews, Fracture in polymers, 1968.

A. S. Argon, A theory for the low-temperature plastic deformation of glassy polymers, Philosophical Magazine, vol.10, issue.4, pp.839-865, 1973.
DOI : 10.1002/pol.1959.1203512829

A. S. Argon, Plastic deformation in glassy polymer, Polymeric Materials, pp.411-486, 1975.

A. S. Argon and R. E. Et-cohen, Toughenability of polymers, Polymer, vol.44, issue.19, p.44, 2003.
DOI : 10.1016/S0032-3861(03)00546-9

A. S. Argon, R. E. Cohen, O. S. Gebizlioglu, H. R. Brown, and E. J. Et-kramer, A new mechanism of toughening glassy polymers. 2. Theoretical approach, Macromolecules, vol.23, issue.17, pp.3975-3982, 1990.
DOI : 10.1021/ma00219a019

A. S. Argon and M. M. Et-salama, Growth of crazes in glassy polymers, Philosophical Magazine, vol.10, issue.5, pp.1217-1234, 1977.
DOI : 10.1098/rspa.1975.0012

E. M. Arruda and M. C. Et-boyce, Evolution of plastic anisotropy in amorphous polymers during finite straining, International Journal of Plasticity, vol.9, issue.6, pp.697-720, 1993.
DOI : 10.1016/0749-6419(93)90034-N

R. Bagheri and R. A. Et-pearson, Role of particle cavitation in rubber-toughened epoxies: II. Inter-particle distance, Polymer, vol.41, issue.1, pp.269-276, 2000.
DOI : 10.1016/S0032-3861(99)00126-3

A. R. Baljon and M. O. Et-robbins, Simulations of Crazing in Polymer Glasses:?? Effect of Chain Length and Surface Tension, Macromolecules, vol.34, issue.12, p.4200, 2001.
DOI : 10.1021/ma0012393

J. M. Ball, Discontinuous Equilibrium Solutions and Cavitation in Nonlinear Elasticity, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.306, issue.1496, pp.557-611, 1982.
DOI : 10.1098/rsta.1982.0095

G. I. Barenblatt, The mathematical theory of equilibrium cracks in brittle fracture Advances in applied mechanics, pp.55-129, 1962.

Z. Bartczak, A. S. Argon, and R. E. Et-cohen, Deformation mechanisms and plastic resistance in single-crystal-textured high-density polyethylene, Macromolecules, vol.25, issue.19, p.5036, 1992.
DOI : 10.1021/ma00045a034

Z. Bartczak, A. S. Argon, R. E. Cohen, and T. Et-kowalewski, The morphology and orientation of polyethylene in films of sub-micron thickness crystallized in contact with calcite and rubber substrates, Polymer, vol.40, issue.9, pp.2367-2380, 1999.
DOI : 10.1016/S0032-3861(98)00443-1

B. Bartczak, Z. Argon, A. S. Cohen, R. E. Et-weinberg, and M. , Toughness mechanism in semi-crystalline polymer blends: I. High-density polyethylene toughened with rubbers, Polymer, vol.40, issue.9, pp.2331-2346, 1999.
DOI : 10.1016/S0032-3861(98)00445-5

Z. Bartczak, A. S. Argon, R. E. Cohen, and M. Et-weinberg, Toughness mechanism in semi-crystalline polymer blends: II. High-density polyethylene toughened with calcium carbonate filler particles, Polymer, vol.40, issue.9, pp.2347-2365, 1999.
DOI : 10.1016/S0032-3861(98)00444-3

S. Basu, D. K. Mahajana, and E. V. Der-giessen, Micromechanics of the growth of a craze fibril in glassy polymers, Polymer, vol.46, issue.18, pp.7504-7518, 2005.
DOI : 10.1016/j.polymer.2005.05.148

S. Basu and E. Van-der-giessen, A thermo-mechanical study of mode I, small-scale yielding crack-tip fields in glassy polymers, International Journal of Plasticity, vol.18, issue.10, pp.1395-1423, 2002.
DOI : 10.1016/S0749-6419(02)00009-8

U. D. Baumann, The role of particle cavitation in the toughening of polymers, Thèse de doctorat, 1998.

R. Becker, The effect of porosity distribution on ductile failure, Journal of the Mechanics and Physics of Solids, vol.35, issue.5, pp.577-599, 1987.
DOI : 10.1016/0022-5096(87)90018-4

R. Becker and A. Et-needleman, Effect of Yield Surface Curvature on Necking and Failure in Porous Plastic Solids, Journal of Applied Mechanics, vol.53, issue.3, pp.491-499, 1986.
DOI : 10.1115/1.3171801

R. Becker, A. Needleman, O. Richmond, and V. Et-tvergaard, Void growth and failure in notched bars, Journal of the Mechanics and Physics of Solids, vol.36, issue.3, pp.317-351, 1988.
DOI : 10.1016/0022-5096(88)90014-2

C. A. Berg, Inelastic behaviour of solids, 1970.

L. L. Berger, On the mechanism of craze fibril breakdown in glassy polymers, Macromolecules, vol.23, issue.11, pp.2926-2934, 1990.
DOI : 10.1021/ma00213a019

J. Besson and R. Et-foerch, Large scale object-oriented finite element code design, Computer Methods in Applied Mechanics and Engineering, vol.142, issue.1-2, 1997.
DOI : 10.1016/S0045-7825(96)01124-3

J. Besson and C. Et-guillemer-neel, An extension of the Green and Gurson models to kinematic hardening, Mechanics of Materials, vol.35, issue.1-2, pp.1-18, 2003.
DOI : 10.1016/S0167-6636(02)00169-2

J. Besson, D. Steglich, and W. Et-brocks, Modeling of crack growth in round bars and plane strain specimens, International Journal of Solids and Structures, vol.38, issue.46-47, p.38, 2001.
DOI : 10.1016/S0020-7683(01)00167-6

O. Bondil, Etude de l'Endommagement en Sommet de Fissure dans les Polymères Amorphes Renforcés Choc par Nodules d'Elastomère, Thèse de doctorat, 2006.

N. Bonora, D. Gentile, A. Pirondi, and G. Et-newazc, Ductile damage evolution under triaxial state of stress: theory and experiments, International Journal of Plasticity, vol.21, issue.5, pp.981-1007, 2005.
DOI : 10.1016/j.ijplas.2004.06.003

R. J. Borggreve, R. J. Gaymans, and H. M. Et-eichenwald, Impact behaviour of nylon-rubber blends: 6. Influence of structure on voiding processes; toughening mechanism, Polymer, vol.30, issue.1, pp.78-83, 1989.
DOI : 10.1016/0032-3861(89)90386-8

R. J. Borggreve, R. J. Gaymans, and J. Et-schuijer, Impact behaviour of nylon-rubber blends: 5. Influence of the mechanical properties of the elastomer, Polymer, vol.30, issue.1, pp.71-77, 1989.
DOI : 10.1016/0032-3861(89)90385-6

P. Bowden and J. A. Et-jukes, The plastic flow of isotropic polymers, Journal of Materials Science, vol.2, issue.6, pp.52-63, 1972.
DOI : 10.1007/BF00549550

P. B. Bowden, The yield behaviour of glassy polymers Applied Sciences Publisher In : The physics of glassy polymers, pp.279-295, 1973.

M. C. Boyce and E. M. Et-arruda, An experimental and anaiytical investigation of the large strain compressive and tensile response of glassy polymers, Polymer Engineering and Science, vol.19, issue.20, pp.1288-1298, 1990.
DOI : 10.1002/pen.760302005

M. C. Boyce, E. L. Montagut, and A. S. Et-argon, The effects of thermomechanical coupling on the cold drawing process of glassy polymers, Polymer Engineering and Science, vol.46, issue.16, pp.1073-1085, 1992.
DOI : 10.1002/pen.760321605

M. C. Boyce, D. M. Parks, and A. S. Et-argon, Large inelastic deformation of glassy polymers. part I: rate dependent constitutive model, Mechanics of Materials, vol.7, issue.1, pp.15-33, 1988.
DOI : 10.1016/0167-6636(88)90003-8

J. E. Breedon, J. F. Jackson, M. J. Marcinkowski, and M. E. Taylor, Scanning electron microscopy observations of polyethylene spherulites, Journal of Materials Science, vol.1, issue.1, pp.143-145, 1973.
DOI : 10.1007/BF00755595

P. W. Bridgman, The stress distribution at the neck of a tension specimen, Transaction ASM, vol.32, pp.553-574, 1944.

W. Brocks, D. Klingbeil, G. Kunecke, and D. Z. Et-sun, Constraint effects in fracture theory and applications, Application of the Gurson model to ductile tearing resistance, pp.232-252, 1995.

H. R. Brown, A molecular interpretation of the toughness of glassy polymers, Macromolecules, vol.24, issue.10, pp.2752-2756, 1991.
DOI : 10.1021/ma00010a018

N. Brown, Yield behaviour of polymers, 1986.

N. Brown and I. M. Ward, The influence of morphology and molecular weight on ductile-brittle transitions in linear polyethylene, Journal of Materials Science, vol.17, issue.5, 1983.
DOI : 10.1007/BF01111960

C. B. Bucknall, P. S. Heather, and A. Et-lazzeri, Rubber toughening of plastics, Journal of Materials Science, vol.26, issue.6, pp.2255-2261, 1989.
DOI : 10.1007/BF02385450

C. B. Bucknall, A. Karpodinis, and X. C. Et-zhang, A model for particle cavitation in rubber-toughened plastics, Journal of Materials Science, vol.28, issue.13, pp.3377-3383, 1994.
DOI : 10.1007/BF00352036

L. Cangemi, S. Elkoun, C. Sell, and Y. Et-meimon, Volume strain changes of plasticized poly(vinylidene fluoride) during tensile and creep tests, Journal of Applied Polymer Science, vol.34, issue.3, pp.1784-1791, 2004.
DOI : 10.1002/app.13313

S. Castagnet, Comportement mécanique du PVDF : compétition entre cavitation et écoulement visqueux, Thèse de doctorat, 1998.

S. Castagnet, S. Girault, J. L. Gacougnolle, and P. Et-dang, Cavitation in strained polyvinylidene fluoride: mechanical and X-ray experimental studies, Polymer, vol.41, issue.20, pp.7523-7530, 2000.
DOI : 10.1016/S0032-3861(00)00077-X

M. Challier, J. Besson, L. Laiarinandrasana, and R. Et-piques, Damage and fracture of polyvinylidene fluoride (PVDF) at 20??C: Experiments and modelling, Engineering Fracture Mechanics, vol.73, issue.1, pp.79-90, 2006.
DOI : 10.1016/j.engfracmech.2005.06.007

URL : https://hal.archives-ouvertes.fr/hal-00154563

G. Charpy, Mémoires et compte rendu de la société des ingénieurs civils de France, chapitre Sur l'essai des métaux par flexion de barreaux entaillés, pp.468-482, 1904.

C. C. Chu and A. Et-needleman, Void Nucleation Effects in Biaxially Stretched Sheets, Journal of Engineering Materials and Technology, vol.102, issue.3, pp.249-256, 1980.
DOI : 10.1115/1.3224807

A. S. Cohen and R. E. Et-argon, Toughenability of polymers, Polymer, vol.44, pp.6013-6032, 2003.

L. Corté, Renforcement des polymères semi-cristallins, Thèse de doctorat, 2006.

L. Corté, F. Beaume, and L. Et-leibler, Crystalline organization and toughening: example of polyamide-12, Polymer, vol.46, issue.8, pp.2748-2757, 2005.
DOI : 10.1016/j.polymer.2005.01.040

L. Corté and L. Et-leibler, A Model for Toughening of Semicrystalline Polymers, Macromolecules, vol.40, issue.15, pp.5606-5611, 2007.
DOI : 10.1021/ma0706935

A. Dahoun, G. Sell, A. Molinari, and G. Et-canova, Plastic behavior and deformation textures of poly(ether ether ketone) under uniaxial tension and simple shear. Use of plastics and plastic composites : materials and mechanical issues, pp.57-76, 1993.

H. G. De-lorenzi and A. Et-lagenddijk, Energy release rate calculations by the finite element methods Engineering Fracture Mechanics, 21. den Outer, Influence of the refractive index contrast on coherent backscattering, Optics Commun, vol.103, pp.169-173, 1985.

Y. Escatha and J. C. Et-devaux, Elastic-Plastic Fracture, chapitre Numerical study of initiation, stable crack growth and maximum load with a ductile fracture criterion based on the growth of holes, pp.229-248, 1979.

K. Dijkstra and G. H. Et-bolscher, Nylon-6/rubber blends, Journal of Materials Science, vol.26, issue.16, p.4286, 1994.
DOI : 10.1007/BF00414212

K. Dijkstra, A. Van-der-wal, and R. J. Et-gaymans, Nylon-6-rubber blends, Journal of Materials Science, vol.33, issue.13, pp.3489-2496, 1994.
DOI : 10.1007/BF00352054

F. L. Dimaggio and I. S. Et-sandler, Material model for granular soils, Journal of the Engineering Mechanics Division, vol.97, pp.935-950, 1971.

W. Döll, Optical interference measurements and fracture mechanics analysis of crack tip craze zones, Advanced Polymer Science, vol.52, pp.105-168, 1983.
DOI : 10.1007/BFb0024057

T. E. Doh, Comportement et endommagement du pvdf vieilli : application sur la mise en forme des gaines de pression, 2004.

D. Dompas, G. Groenincks, M. Isogawa, T. Hasegawa, and M. Et-kadokura, Cavitation versus debonding during deformation of rubber modified poly(vinyl chloride) Polymer, pp.437-441, 1995.

D. Dompas and G. Et-groeninckx, Toughening behaviour of rubber-modified thermoplastic polymers involving very small rubber particles: 1. A criterion for internal rubber cavitation, Polymer, vol.35, issue.22, pp.4743-4749, 1994.
DOI : 10.1016/0032-3861(94)90727-7

D. C. Drucker and W. Et-prager, Soil mechanics and plastic analysis or limit design, Quarterly of Applied Mathematics, vol.10, issue.2, pp.157-165, 1952.
DOI : 10.1090/qam/48291

D. S. Dugdale, Yielding of steel sheets containing slits, Journal of the Mechanics and Physics of Solids, vol.8, issue.2, pp.100-108, 1960.
DOI : 10.1016/0022-5096(60)90013-2

B. Echalier, Transition ductile-fragile d'un polyamide 11 plastifié, Thèse de doctorat, 1989.

B. Escaig and J. M. Et-lefebvre, Thermodynamic and kinetic analysis of non elastic deformation in polymeric glasses, Revue de Physique Appliqu??e, vol.13, issue.6, pp.285-292, 1978.
DOI : 10.1051/rphysap:01978001306028500

URL : https://hal.archives-ouvertes.fr/jpa-00244451

J. D. Eshelby, The Determination of the Elastic Field of an Ellipsoidal Inclusion, and Related Problems, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.241, issue.1226, pp.376-396, 1957.
DOI : 10.1098/rspa.1957.0133

R. Estevez, M. G. Tijssens, and E. Van-der-giessen, Modeling of the competition between shear yielding and crazing in glassy polymers, Journal of the Mechanics and Physics of Solids, vol.48, issue.12, pp.2585-2617, 2000.
DOI : 10.1016/S0022-5096(00)00016-8

B. Faleskog, J. Gao, X. Et-shih, and C. F. , Cell model for nonlinear fracture analysis. i. micromechanics calibration, International Journal of Fracture, vol.89, issue.4, pp.355-373, 1998.
DOI : 10.1023/A:1007421420901

E. W. Fischer, Stufen-und spiralfó l rmiges kristallwachstum bei hochpolymeren, Z. Naturforsch, vol.12, pp.753-754, 1957.

C. Fond, S. Géhant, and R. Et-schirrer, Effects of mechanical interactions on the hydrostatic stress in randomly distributed rubber particles in an amorphous polymer matrix, Polymer, vol.43, issue.3, pp.909-919, 2002.
DOI : 10.1016/S0032-3861(01)00621-8

C. Fond, A. Lobbrecht, and R. Et-schirrer, Polymers toughened with rubber microspheres: an analytical solution for stresses and strains in the rubber particles at equilibrium and rupture, International Journal of Fracture, vol.249, issue.2, pp.141-159, 1996.
DOI : 10.1007/BF00037234

K. Friedrich, Crazing in Polymers, chapitre Crazes and shear bands in semi-crystalline thermoplastics, pp.226-271, 1983.

T. Fukui, Y. Kikuchi, and T. Et-inoue, Elastic-plastic analysis of the toughening mechanism in rubber-modified nylon: matrix yielding and cavitation, Polymer, vol.32, issue.13, p.2367, 1991.
DOI : 10.1016/0032-3861(91)90075-T

A. Galeski, Strength and toughness of crystalline polymer systems, Progress in Polymer Science, vol.28, issue.12, pp.1643-1699, 2003.
DOI : 10.1016/j.progpolymsci.2003.09.003

A. Galeski, A. S. Argon, and R. E. Et-cohen, Changes in the morphology of bulk spherulitic nylon 6 due to plastic deformation, Macromolecules, vol.21, issue.9, pp.2761-2770, 1989.
DOI : 10.1021/ma00187a021

A. Galeski, A. S. Argon, and R. E. Et-cohen, Morphology of nylon 6 spherulites in bulk, Die Makromolekulare Chemie, vol.188, issue.5, pp.1195-1204, 1989.
DOI : 10.1002/macp.1987.021880522

X. Gao, J. Faleskog, and C. F. Et-shih, Cell model for nonlinear fracture analysis. II. fracture process calibration and verification, International Journal of Fracture, vol.89, issue.4, pp.375-398, 1998.
DOI : 10.1023/A:1007410825313

A. N. Gent and P. B. Et-lindley, Internal Rupture of Bonded Rubber Cylinders in Tension, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.249, issue.1257, pp.195-205, 1959.
DOI : 10.1098/rspa.1959.0016

S. Géhant, C. Fond, and R. Et-schirrer, Criteria for cavitation of rubber particles: Influence of plastic yielding in the matrix, International Journal of Fracture, vol.122, issue.3/4, pp.161-175, 2003.
DOI : 10.1023/B:FRAC.0000005790.35684.1d

S. Géhant and R. Et-schirrer, Multiple light scattering and cavitation in two phase tough polymers, Journal of Polymer Science Part B: Polymer Physics, vol.44, issue.2, pp.113-126, 1999.
DOI : 10.1002/(SICI)1099-0488(19990115)37:2<113::AID-POLB2>3.0.CO;2-P

M. Gologanu, Etude de quelques problèmes de rupture ductile des métaux, Thèse de doctorat, 1997.

M. Gologanu, J. B. Leblond, and J. Et-devaux, Approximate models for ductile metals containing non-spherical voids???Case of axisymmetric prolate ellipsoidal cavities, Journal of the Mechanics and Physics of Solids, vol.41, issue.11, pp.1723-1754, 1993.
DOI : 10.1016/0022-5096(93)90029-F

M. Gologanu, J. B. Leblond, and J. Et-devaux, Approximate Models for Ductile Metals Containing Nonspherical Voids???Case of Axisymmetric Oblate Ellipsoidal Cavities, Journal of Engineering Materials and Technology, vol.116, issue.3, pp.290-297, 1994.
DOI : 10.1115/1.2904290

M. Gologanu, J. B. Leblond, G. Perrin, and J. Et-devaux, Continuum Micromechanics, chapitre Recent extensions of Gurson's model for porous ductile metals in Continuum Micromechanics, 1995.

J. N. Goodier, Concentration of stress around spherical and cylindrical inclusions and flaws, Journal of Applied Mechanics, pp.55-739, 1933.

M. Grange, J. Besson, and E. Et-andrieu, An anisotropic gurson type model to represent the ductile rupture of hydrided zircaloy-4 sheets, International Journal of Fracture, vol.105, 2000.

A. A. Griffith, The Phenomena of Rupture and Flow in Solids, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.221, issue.582-593, pp.163-198, 1920.
DOI : 10.1098/rsta.1921.0006

G. Sell and C. , Instabilités de déformation pendant l'étirage des polymères solides, pp.1085-1101, 1988.

G. Sell and C. , Introduction à la mécanique des polymères, chapitre Loi de comportement mécanique des polymères solides, pp.141-168, 1995.

G. Sell, C. Aly-helal, N. A. Et-jonas, and J. J. , Effect of stress triaxiality on neck propagation during the tensile stretching of solid polymers, Journal of Materials Science, vol.6, issue.6, pp.1731-1742, 1983.
DOI : 10.1007/BF00542069

G. Sell, C. Hiver, J. M. Et-dahoun, and A. , Experimental characterization of deformation damage in solid polymers under tension, and its interrelation with necking, International Journal of Solids and Structures, vol.39, issue.13-14, pp.3857-3872, 2002.
DOI : 10.1016/S0020-7683(02)00184-1

G. Sell, C. Hiver, J. M. Dahoun, A. Souahi, and A. , Video-controlled tensile testing of polymers and metals beyond the necking point, Journal of Materials Science, vol.264, issue.18, pp.5031-5039, 1992.
DOI : 10.1007/BF01105270

G. Sell, C. Et-jonas, and J. J. , Determination of the plastic behaviour of solid polymers at constant true strain rate, Journal of Materials Science, vol.15, issue.6, pp.583-591, 1979.
DOI : 10.1007/BF00772717

T. F. Guo, J. Faleskog, and C. F. Et-shiha, Continuum modeling of a porous solid with pressure-sensitive dilatant matrix, Journal of the Mechanics and Physics of Solids, vol.56, issue.6, pp.2188-2212, 2008.
DOI : 10.1016/j.jmps.2008.01.006

A. L. Gurson, Plastic flow and fracture behavior of ductile materials incorporation void nucleation, growth, and interaction, Thèse de doctorat, 1975.

A. L. Gurson, Continuum theory of ductile rupture by void nucleation and growth : Part 1 : Yield criteria and flow rules for porous ductile media, Journal of Engineering Materials and Technology, 1977.

H. B. Hamouda, Endommagement et Fissuration en Fluage de Polyéthylènes Extrudés : Approche Locale -Approche Globale, Thèse de doctorat, 2000.

H. Z. Han, T. C. Mcleish, R. A. Duckett, N. J. Ward, A. F. Johnson et al., Experimental and Theoretical Studies of the Molecular Motions in Polymer Crazing. 1. Tube Model, Macromolecules, vol.31, issue.4, pp.1348-1357, 1988.
DOI : 10.1021/ma961896o

S. Hao and W. Et-brocks, The Gurson-Tvergaard-Needleman-model for rate and temperature-dependent materials with isotropic and kinematic hardening, Computational Mechanics, vol.20, issue.1-2, pp.34-40, 1997.
DOI : 10.1007/s004660050213

J. M. Haudin, Introduction à la mécanique des polymères, chapitre Mécanismes microscopiques de déformation des polymères semicristallins, C. G'Sell et J.M. Haudin, INPL, pp.251-273, 1995.

J. M. Haudin, Matériaux pour l'ingénieur, chapitre Solidification, Mise en forme des polymères, pp.125-136, 2006.

J. M. Haudin and C. Et-g-'sell, Introduction à la mécanique des polymères, chapitre Structures et morphologies des polymères semi-cristallins, C. G'Sell et J.M. Haudin, pp.97-115, 1995.

R. Hill, A Theory of the Yielding and Plastic Flow of Anisotropic Metals, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.193, issue.1033, pp.281-297, 1947.
DOI : 10.1098/rspa.1948.0045

R. Hill, The mathematical theory of plasticity, 1950.

H. Roscoe, K. , N. Schofield, A. , P. Wroth et al., On The Yielding of Soils, G??otechnique, vol.8, issue.1, pp.71-83, 1958.
DOI : 10.1680/geot.1958.8.1.22

J. Hutchinson, Singular behaviour at the end of a tensile crack in a hardening material, Journal of the Mechanics and Physics of Solids, vol.16, issue.1, pp.13-31, 1968.
DOI : 10.1016/0022-5096(68)90014-8

R. R. Irani and C. F. Et-callis, Particle size : measurement, interpretation and application, 1963.

G. R. Irwin, Handbook der Physik 6, 1958.

M. Ishikawa, I. Narisawa, and H. Et-ogawa, Criterion for craze nucleation in pc, Journal of Polymer Science, vol.15, 1977.

A. Ivankovic, K. C. Pandya, and J. G. Et-williams, Crack growth predictions in polyethylene using measured traction???separation curves, Engineering Fracture Mechanics, vol.71, issue.4-6, pp.657-668, 2004.
DOI : 10.1016/S0013-7944(03)00030-4

A. Jean, Etude d'un élastomère chargé : de sa nanostructure à son macrocomportement, Thèse de doctorat, 2009.

W. Jiang, H. Liang, and B. Et-jiang, Interparticle distance-temperature-strain rate equivalence for the brittle-tough transition in polymer blends, Polymer, vol.39, issue.18, pp.4437-4442, 1998.
DOI : 10.1016/S0032-3861(97)00627-7

W. Jiang, Q. Yuang, L. An, and B. Et-jiang, Effect of cavitations on brittle???ductile transition of particle toughened thermoplastics, Polymer, vol.43, issue.4, pp.1555-1558, 2002.
DOI : 10.1016/S0032-3861(01)00676-0

L. Jolly, A. Tidu, J. J. Heizmann, and B. Et-bolle, Microstructure evolution in polyamide PA11 under small uniaxial extension, Polymer, vol.43, issue.25, pp.6839-6851, 2002.
DOI : 10.1016/S0032-3861(02)00486-X

T. Kanit, Notion of representative volume element for heterogeneous materials : statistical and numerical approach, Thèse de doctorat, 2005.
URL : https://hal.archives-ouvertes.fr/tel-00005751

H. H. Kausch, Energy considerations relating to crack propagations in thermoplastics, Kuntstoffe, vol.66, pp.538-544, 1976.

A. Keller, A note on single crystals in polymers: Evidence for a folded chain configuration, Philosophical Magazine, vol.59, issue.21, pp.1171-1175, 1957.
DOI : 10.1021/ja01121a529

A. Keller, Electron microscope-electron diffraction investigations of the crystalline texture of polyamides, Journal of Polymer Science, vol.36, issue.130, p.361, 1959.
DOI : 10.1002/pol.1959.1203613032

J. Kim, X. Gao, and T. S. Et-srivatsan, Modeling of void growth in ductile solids: effects of stress triaxiality and initial porosity, Engineering Fracture Mechanics, vol.71, issue.3, pp.379-400, 2004.
DOI : 10.1016/S0013-7944(03)00114-0

M. Kinoshita, An investigation of the structures of polyamide series, Die Makromolekulare Chemie, vol.33, issue.1, pp.1-20, 1959.
DOI : 10.1002/macp.1959.020330101

M. I. Kohan, Nylon Plastics, p.295, 1973.

J. Koplik and A. Et-needleman, Void growth and coalescence in porous plastic solids, International Journal of Solids and Structures, vol.24, issue.8, pp.835-853, 1988.
DOI : 10.1016/0020-7683(88)90051-0

H. H. Kramer, Microscopic and molecular fundamentals of crazing, Advanced Polymer Science, vol.52, pp.1-56, 1983.
DOI : 10.1007/BFb0024055

H. H. Kramer and L. L. Et-berger, Craze growth and fracture, Advances in Polymer Science, vol.91, pp.1-68, 1990.

V. S. Kuksenko and V. P. Et-tamuzs, Fracture micromechanics of polymer materials, pp.61-163, 1981.
DOI : 10.1007/978-94-017-1597-3

M. Lafarge, Modélisation couplée comportement endommagement et critères de rupture dans le domaine de transition du PVDF, Thèse de doctorat, 2004.

A. Lagenddijk, R. Vreeker, and P. Et-devries, Influence of internal reflection on diffusive transport in strongly scattering media, Physics Letters A, vol.136, issue.1-2, pp.81-88, 1989.
DOI : 10.1016/0375-9601(89)90683-X

J. Lai and E. Van-der-giessen, A numerical study of crack-tip plasticity in glassy polymers, Mechanics of Materials, vol.25, issue.3, pp.183-197, 1997.
DOI : 10.1016/S0167-6636(97)00006-9

L. Laiarinandrasana, J. Besson, M. Lafarge, and G. Et-hochstetter, Temperature dependent mechanical behaviour of PVDF: Experiments and numerical modelling, International Journal of Plasticity, vol.25, issue.7, pp.1301-1324, 2009.
DOI : 10.1016/j.ijplas.2008.09.008

URL : https://hal.archives-ouvertes.fr/hal-00390741

A. Lazzeri and C. B. Et-bucknall, Dilatational bands in rubber-toughened polymers, Journal of Materials Science, vol.30, issue.3, pp.6799-6808, 1993.
DOI : 10.1007/BF00356433

A. Lazzeri and C. B. Et-bucknall, Applications of a dilatational yielding model to rubber-toughened polymers, Polymer, vol.36, issue.15, pp.2895-2902, 1995.
DOI : 10.1016/0032-3861(95)94338-T

J. B. Leblond and G. Et-perrin, Introduction à la mécanique de la rupture ductile des métaux, 1996.

J. B. Leblond, G. Perrin, and J. Et-devaux, An imporved Gursontype model for hardenable ductile detals, European Journal of Mechanics A/Solids, vol.14, pp.499-527, 1995.

B. J. Lee, A. S. Argon, D. M. Parks, D. M. Ahzi, and Z. Et-barctzak, Simulation of large strain plastic deformation and texture evolution in high density polyethylene, Polymer, vol.34, issue.17, pp.3555-3575, 1993.
DOI : 10.1016/0032-3861(93)90039-D

P. S. Leevers, Impact and dynamic fracture of tough polymers by thermal decohesion in a Dugdale zone, International Journal of Fracture, vol.66, issue.20, pp.109-127, 1995.
DOI : 10.1007/BF00055724

P. S. Leevers, Impact fracture of polyethylene: A non-linear-elastic thermal decohesion model, Engineering Fracture Mechanics, vol.52, issue.6, pp.999-1014, 1995.
DOI : 10.1016/0013-7944(95)00086-B

P. S. Leevers, Impact and dynamic fracture resistance of crystalline thermoplastics: Prediction from bulk properties, Polymer Engineering & Science, vol.61, issue.18, pp.2296-2305, 1996.
DOI : 10.1002/pen.10628

X. Lefebvre, Fissuration Fragile Lente du Polyamide 11 : Mécanismes et Durées de Vie en Fluage, Thèse de doctorat, 2002.

B. J. Lin and A. S. Et-argon, Deformation resistance in oriented nylon 6, Macromolecules, vol.25, issue.15, p.4011, 1992.
DOI : 10.1021/ma00041a025

Y. Liu, S. Murakami, and Y. Et-kanagawa, Mesh-dependence and stress singularity in finite element analysis of creep crack growth by continuum damage mechanics approach, European Journal of Mechanics, vol.13, pp.395-417, 1994.

J. H. Magill, Formation of spherulities in polyamides. iv. evenodd polyamides and poly(?aminocarboxylic acids), Journal of Polymer Science, vol.7, pp.123-142, 1969.

A. Margolina and S. Wu, Percolation model for brittle-tough transition in nylon/rubber blends, Polymer, vol.29, issue.12, pp.2710-2173, 1988.
DOI : 10.1016/0032-3861(88)90108-5

B. Marini, F. Mudry, and A. Pineau, Experimental study of cavity growth in ductile rupture, Engineering Fracture Mechanics, vol.22, issue.6, pp.989-996, 1985.
DOI : 10.1016/0013-7944(85)90038-4

A. Marquez-lucero, C. G-'sell, and K. W. Et-neale, Experimental investigation of neck propagation in polymers, Polymer, vol.30, issue.4, pp.636-642, 1989.
DOI : 10.1016/0032-3861(89)90147-X

O. Mauzac and R. Et-schirrer, Crack-tip damaged zones in rubber-toughened amorphous polymers: a micromechanical model, Journal of Materials Science, vol.28, issue.12, pp.5125-5133, 1992.
DOI : 10.1007/BF00580140

F. A. Mcclintock, A Criterion for Ductile Fracture by the Growth of Holes, Journal of Applied Mechanics, vol.35, issue.2, 1968.
DOI : 10.1115/1.3601204

F. A. Mcclintock, Local criteria for ductile fracture, International Journal of Fracture Mechanics, vol.4, issue.2, pp.103-130, 1968.
DOI : 10.1007/BF00188939

M. Mear and J. Et-hutchinson, Influence of yield surface curvature on flow localization in dilatant plasticity, Mechanics of Materials, vol.4, issue.3-4, pp.395-407, 1985.
DOI : 10.1016/0167-6636(85)90035-3

Y. F. Men, J. Rieger, and J. Et-homeyer, Synchrotron Ultrasmall-Angle X-ray Scattering Studies on Tensile Deformation of Poly(1-butene), Macromolecules, vol.37, issue.25, pp.9481-9488, 2004.
DOI : 10.1021/ma048274k

A. Molinari, G. Canova, and S. Et-ahzi, A self consistent approach of the large deformation polycrystal viscoplasticity, Acta Metallurgica, vol.35, issue.12, pp.2283-2994, 1987.
DOI : 10.1016/0001-6160(87)90297-5

M. Murato?glu, O. K. Argon, A. S. Et-cohen, and R. E. , Crystalline morphology of polyamide-6 near planar surfaces, Polymer, vol.36, issue.11, pp.2143-2152, 1995.
DOI : 10.1016/0032-3861(95)95289-D

M. Murato?glu, O. K. Argon, A. S. Cohen, R. E. Et-weinberg, and M. , Microstructural fracture processes accompanying growing cracks in tough rubber-modified polyamides, Polymer, vol.36, issue.25, pp.4787-4795, 1995.
DOI : 10.1016/00323-8619(59)92945-

M. Murato?glu, O. K. Argon, A. S. Cohen, R. E. Et-weinberg, and M. , Toughening mechanism of rubber-modified polyamides, Polymer, vol.36, issue.5, pp.921-930, 1995.
DOI : 10.1016/0032-3861(95)93590-I

K. Nahshon and J. Et-hutchinson, Modification of the Gurson Model for shear failure, European Journal of Mechanics - A/Solids, vol.27, issue.1, pp.1-17, 2007.
DOI : 10.1016/j.euromechsol.2007.08.002

B. Needleman and A. , A Continuum Model for Void Nucleation by Inclusion Debonding, Journal of Applied Mechanics, vol.54, issue.3, pp.525-531, 1987.
DOI : 10.1115/1.3173064

A. Needleman and V. Et-tvergaard, An analysis of ductile rupture modes at a crack tip, Journal of the Mechanics and Physics of Solids, vol.35, issue.2, pp.151-183, 1987.
DOI : 10.1016/0022-5096(87)90034-2

R. P. Nimmer and J. T. Et-woods, An investigation of brittle failure in ductile, notch-sensitive thermoplastics, Polymer Engineering and Science, vol.7, issue.4, 1992.
DOI : 10.1002/pen.760321610

A. J. Oostenbrink, L. J. Molenaar, and R. J. Et-gaymans, Polymer processing society, 6 th Annual Meeting, 1990.

A. J. Oshinski, H. Keskkula, and D. R. Paul, The effect of polyamide end-group configuration on morphology and toughness of blends with maleated elastomers, Journal of Applied Polymer Science, vol.61, issue.4, pp.623-640, 1996.
DOI : 10.1002/(SICI)1097-4628(19960725)61:4<623::AID-APP6>3.0.CO;2-N

T. Pardoen, I. Doghri, and F. Et-delannay, Experimental and numerical comparison of void growth models and void coalescence criteria for the prediction of ductile fracture in copper bars, Acta Materialia, vol.46, issue.2, pp.541-552, 1998.
DOI : 10.1016/S1359-6454(97)00247-4

T. Pardoen and J. W. Et-hutchinson, An extended model for void growth and coalescence, Journal of the Mechanics and Physics of Solids, vol.48, issue.12, pp.2467-2512, 2000.
DOI : 10.1016/S0022-5096(00)00019-3

A. Pawlak and E. Et-piorkowska, Effect of negative pressure on melting behavior of spherulites in thin films of several crystalline polymers, Journal of Applied Polymer Science, vol.22, issue.6, pp.1380-1385, 1999.
DOI : 10.1002/(SICI)1097-4628(19991107)74:6<1380::AID-APP9>3.0.CO;2-M

R. A. Pearson and A. F. Et-yee, Toughening mechanisms in elastomermodified epoxies, part 2. microscopy studies, Journal of Materials Science, vol.21, pp.2457-1488, 1986.

R. A. Pearson and A. F. Et-yee, Influence of particle size and particle size distribution on toughening mechanisms in rubber-modified epoxies, Journal of Materials Science, vol.24, issue.14, pp.3828-3844, 1991.
DOI : 10.1007/BF01184979

J. Perez, Matériaux non cristallins et science du désordre, 2001.

G. Perrin and J. B. Et-leblond, Analytical study of a hollow sphere made of plastic porous material and subjected to hydrostatic tension-application to some problems in ductile fracture of metals, International Journal of Plasticity, vol.6, issue.6, pp.677-699, 1990.
DOI : 10.1016/0749-6419(90)90039-H

A. Peterlin, Molecular model of drawing polyethylene and polypropylene, Journal of Materials Science, vol.5, issue.197, pp.490-508, 1971.
DOI : 10.1007/BF00550305

A. Peterlin, Plastic Deformation of Unoriented Crystalline Polymers Under Tensile Load, 1972.
DOI : 10.1007/978-1-4615-8684-5_1

A. Peterlin, Plastic deformation of polymers with fibrous structure, Colloid and Polymer Science, vol.75, issue.6, pp.809-823, 1975.
DOI : 10.1007/BF01452401

A. Pineau, Topics in Fracture and Fatigue, chapitre Global and local approaches of fracture -transferability of laboratory test results to components, pp.197-234, 1992.

S. Rabinowitz and P. Et-breadmore, Cyclic deformation and fracture of polymers, Journal of Materials Science, vol.6, issue.3, 1974.
DOI : 10.1007/BF00554758

S. Rabinowitz, I. M. Ward, and J. S. Et-parry, The effect of hydrostatic pressure on the shear yield behaviour of polymers, Journal of Materials Science, vol.32, issue.1, 1970.
DOI : 10.1007/PL00020253

J. Rice and G. F. Et-rosengren, Plane strain deformation near a crack tip in a power-law hardening material, Journal of the Mechanics and Physics of Solids, vol.16, issue.1, pp.1-12, 1968.
DOI : 10.1016/0022-5096(68)90013-6

J. R. Rice and D. M. Tracey, On the ductile enlargement of voids in triaxial stress fields???, Journal of the Mechanics and Physics of Solids, vol.17, issue.3, pp.201-217, 1969.
DOI : 10.1016/0022-5096(69)90033-7

D. Rittel, An investigation of the heat generated during cyclic loading of two glassy polymers. Part I: Experimental, Mechanics of Materials, vol.32, issue.3, pp.131-147, 2000.
DOI : 10.1016/S0167-6636(99)00051-4

K. H. Roscoe and J. B. Et-burland, Engineering Plasticity, chapitre On the generalized stress-strain behaviour of wet clay, pp.535-609, 1968.

J. Rottler and M. O. Et-robbins, Growth, microstructure, and failure of crazes in glassy polymers, Physical Review E, vol.68, issue.1, 2003.
DOI : 10.1103/PhysRevE.68.011801

G. Rousselier, Ductile fracture models and their potential in local approach of fracture, Nuclear Engineering and Design, vol.105, issue.1, pp.97-111, 1987.
DOI : 10.1016/0029-5493(87)90234-2

G. Rousselier, HANDBOOK Materials behavior models, chapitre The Rousselier model for porous metal plasticity and ductile fracture, 2001.

M. Saje, J. Pan, and A. Et-needleman, Void nucleation effects on shear localization in porous plastic solids, International Journal of Fracture, vol.16, issue.3, pp.163-182, 1982.
DOI : 10.1007/BF00017128

R. Schirrer, Introduction à la mécanique des polymères, chapitre Les craquelures dans les polymères, C. G'Sell et J.M. Haudin, INPL, pp.395-411, 1995.

B. Schnell, Etude par simulation numérique de la transition vitreuse et de l'état vitreux de polymères denses amorphes : propriétés mécaniques et phénomène de cavitation, Thèse de doctorat, 2006.

J. M. Schultz, Microstructural aspects of failure in semi-crystalline polymers. Polymer engineering and science, pp.770-785, 1984.

L. Scodellaro, Endommagement par cavitation du polypropylène renforcé au choc par des particules d'élastomère, Thèse de doctorat, 1998.

R. Scott, Structure of Spherulites as Revealed by Selected???Area Electron Diffraction and Electron Microscopy, Journal of Applied Physics, vol.28, issue.10, p.1089, 1959.
DOI : 10.1063/1.1722583

W. D. Seidelmann and L. Könczöl, On the validity of the dugdale model for craze zones at crack tips in pmma, Journal of Materials Science, vol.15, pp.2389-2394, 1980.

Y. Sha, C. Y. Hui, A. Ruina, A. Et-kramer, and E. J. , Detailed simulation of craze fibril failure at a crack tip in a glassy polymer, Acta Materialia, vol.45, issue.9, pp.3555-3563, 1997.
DOI : 10.1016/S1359-6454(97)00059-1

P. Sheng, Introduction to Wave Scattering, Localization, and Mesoscopic Phenomena, 1995.

W. P. Slichter, Crystal structures in polyamides made from ??-amino acids, Journal of Polymer Science, vol.36, issue.130, pp.259-266, 1959.
DOI : 10.1002/pol.1959.1203613020

R. J. Smit, W. A. Brekelmans, and H. E. Et-meijer, Prediction of the mechanical behavior of nonlinear heterogeneous systems by multi-level finite element modeling, Computer Methods in Applied Mechanics and Engineering, vol.155, issue.1-2, pp.181-192, 1999.
DOI : 10.1016/S0045-7825(97)00139-4

S. Socrate and M. C. Et-boyce, Micromechanics of toughened polycarbonate, Journal of the Mechanics and Physics of Solids, vol.48, issue.2, pp.233-273, 2000.
DOI : 10.1016/S0022-5096(99)00037-X

A. C. Steenbrink, E. Van-der-giessen, and P. D. Et-wu, Void growth in glassy polymers, Journal of the Mechanics and Physics of Solids, vol.45, issue.3, p.45, 1997.
DOI : 10.1016/S0022-5096(96)00093-2

S. S. Sternstein, Yielding in glassy polymers, Polymeric Materials, pp.369-410, 1975.

S. S. Sternstein and L. Et-ongchin, Yield criteria for plastic deformation of glassy high polymer in general stress fields, Polymer, vol.10, pp.1117-1124, 1969.

J. Stoer, Computational Mathematical Programming, chapitre Principles of sequential quadratic programming methods for solving nonlinear programs, 1985.

G. Strobl, The physics of polymers, chapitre Microscopic Dynamics, pp.313-356, 1997.

H. J. Sue, J. Huang, and A. F. Et-yee, Interfacial adhesion and toughening mechanisms in an alloy of polycarbonate/polyethylene, Polymer, vol.33, issue.22, p.4868, 1992.
DOI : 10.1016/0032-3861(92)90707-4

D. Z. Sun, R. Kienzler, B. Voss, and W. Schmitt, Fracture mechanics : Twenty-second symposium (volume ii), ASTM STP 1131, pp.368-378, 1992.

B. Tanguy, Modélisation de l'essai Charpy par l'approche locale de la rupture Application au cas de l'acier 16MND5 dans le domaine de la transition, 2001.

B. Tanguy and J. Et-besson, An extension of the rousselier model to viscoplastic temperature dependent materials, International Journal of Fracture, vol.116, issue.1, pp.81-101, 2002.
DOI : 10.1023/A:1020192527733

B. Tanguy, J. Besson, R. Piques, and A. Pineau, Ductile to brittle transition of an A508 steel characterized by Charpy impact test, Engineering Fracture Mechanics, vol.72, issue.1, pp.49-72, 2005.
DOI : 10.1016/j.engfracmech.2004.03.010

URL : https://hal.archives-ouvertes.fr/hal-00142084

P. F. Thomason, A three-dimensional model for ductile fracture by the growth and coalescence of microvoids, Acta Metallurgica, vol.33, issue.6, pp.1087-1095, 1985.
DOI : 10.1016/0001-6160(85)90202-0

P. F. Thomason, Three-dimensional models for the plastic limit-loads at incipient failure of the intervoid matrix in ductile porous solids, Acta Metallurgica, vol.33, issue.6, pp.1079-1085, 1985.
DOI : 10.1016/0001-6160(85)90201-9

P. F. Thomason, Ductile Fracture of Metals, 1990.

P. F. Thomason, Ductile fracture by the growth and coalescence of microvoids of non-uniform size and spacing, Acta Metallurgica et Materialia, vol.41, issue.7, pp.2127-2134, 1993.
DOI : 10.1016/0956-7151(93)90382-3

Y. S. Thyo, A. S. Argon, R. E. Cohen, and M. Et-weinberg, Toughening of isotactic polypropylene with CaCO3 particles, Polymer, vol.43, issue.13, pp.3661-3674, 2002.
DOI : 10.1016/S0032-3861(02)00193-3

M. G. Tijssens, E. Van-der-giessen, and L. J. Et-sluys, Modeling of crazing using a cohesive surface methodology, Mechanics of Materials, vol.32, issue.1, pp.19-35, 2000.
DOI : 10.1016/S0167-6636(99)00044-7

P. H. Till, The growth of single crystals of linear polyethylene, Journal of Polymer Science, vol.24, issue.106, pp.301-306, 1957.
DOI : 10.1002/pol.1957.1202410616

V. Tvergaard, Influence of voids on shear band instabilities under plane strain conditions, International Journal of Fracture, vol.6, issue.4, pp.389-407, 1981.
DOI : 10.1007/BF00036191

V. Tvergaard, On localization in ductile materials containing spherical voids, International Journal of Fracture, vol.18, pp.237-252, 1982.

V. Tvergaard, Material failure by void growth Advances in Applied Mechanics, pp.83-151, 1990.

V. Tvergaard, Effect of void size difference on growth and cavitation instabilities, Journal of the Mechanics and Physics of Solids, vol.44, issue.8, pp.1237-1253, 1996.
DOI : 10.1016/0022-5096(96)00032-4

V. Tvergaard, Interaction of very small voids with larger voids, International Journal of Solids and Structures, vol.35, issue.30, pp.3989-4000, 1998.
DOI : 10.1016/S0020-7683(97)00254-0

V. Tvergaard, Y. Huang, and J. W. Et-hutchinson, Cavitation instabilities in a power hardening elastic-plastic solid, European Journal of Mechanics, A/Solids, vol.11, pp.215-231, 1992.

B. Tvergaard, V. Et-hutchinson, and J. W. , The relation between crack growth resistance and fracture process parameters in elastic-plastic solids, Journal of the Mechanics and Physics of Solids, vol.40, issue.6, pp.1377-1397, 1992.
DOI : 10.1016/0022-5096(92)90020-3

V. Tvergaard and A. Et-needleman, Analysis of the cupcone fracture in a round tensile bar. Acta metallurgica et materialia, pp.157-169, 1984.

P. A. Tzika, M. C. Boyce, and D. M. Et-parks, Micromechanics of deformation in particle-toughened polyamides, Journal of the Mechanics and Physics of Solids, vol.48, issue.9, pp.1893-1929, 2000.
DOI : 10.1016/S0022-5096(99)00096-4

M. C. Van-der-sanden, J. M. De-kok, and H. E. Et-meijer, Deformation and toughness of polymeric systems: 7. Influence of dispersed rubbery phase, Polymer, vol.35, issue.14, pp.2995-3003, 1994.
DOI : 10.1016/0032-3861(94)90412-X

J. A. Van-dommelen, W. A. Brekelmans, and F. P. Et-baaijens, Micromechanical modeling of particle-toughening of polymers by locally induced anisotropy, Mechanics of Materials, vol.35, issue.9, pp.845-863, 2003.
DOI : 10.1016/S0167-6636(02)00307-1

J. Verdu, Traité des plastiques : action de l'eau, volume A3165, 1985.

J. Verdu, Traité des plastiques : vieillissement chimique, volume A3150, 1990.

P. I. Vincent, A correlation between critical tensile strength and polymer crosssectional area, Polymer, p.13, 1972.

I. M. Ward, Review: The yield behaviour of polymers, Journal of Materials Science, vol.2, issue.7, pp.1397-1417, 1971.
DOI : 10.1007/BF00549685

I. M. Ward and D. W. Hadley, Mechanical Properties of Solid Polymers, 1993.

M. W. Wilbrink, A. S. Argon, R. E. Cohen, and M. Et-weinberg, Toughenability of Nylon-6 with CaCO3 filler particles: new findings and general principles, Polymer, vol.42, issue.26, pp.10155-10180, 2001.
DOI : 10.1016/S0032-3861(01)00548-1

J. G. Williams, Fracture mechanics of polymers, Polymer Engineering and Science, vol.16, issue.3, 1984.
DOI : 10.1002/pen.760170303

P. Wu and E. Van-der-giessen, Analysis of shear band propagation in amorphous glassy polymers, International Journal of Solids and Structures, vol.31, issue.11, pp.1493-1517, 1994.
DOI : 10.1016/0020-7683(94)90011-6

P. D. Wu and E. Van-der-giessen, Computational aspects of localized deformations in amorphous glassy polymers, LTM Report, 1068.

P. D. Wu and E. Van-der-giessen, On neck propagation in amorphous glassy polymers under plane strain tension, International Journal of Plasticity, vol.11, issue.3, pp.211-235, 1995.
DOI : 10.1016/0749-6419(94)00043-3

S. Wu, Phase structure and adhesion in polymer blends: A criterion for rubber toughening, Polymer, vol.26, issue.12, pp.1855-1863, 1985.
DOI : 10.1016/0032-3861(85)90015-1

S. Wu, A generalized criterion for rubber toughening: The critical matrix ligament thickness, Journal of Applied Polymer Science, vol.35, issue.2, pp.549-561, 1988.
DOI : 10.1002/app.1988.070350220

L. Xia and C. F. Et-shih, Ductile crack growth-I. A numerical study using computational cells with microstructurally-based length scales, Journal of the Mechanics and Physics of Solids, vol.43, issue.2, pp.233-259, 1995.
DOI : 10.1016/0022-5096(94)00064-C

L. Xia and C. F. Et-shih, Ductile crack growth???II. Void nucleation and geometry effects on macroscopic fracture behavior, Journal of the Mechanics and Physics of Solids, vol.43, issue.12, pp.1953-1981, 1995.
DOI : 10.1016/0022-5096(95)00063-O

L. Xia, C. F. Shih, and J. W. Et-hutchinson, A computational approach to ductile crack growth under large scale yielding conditions, Journal of the Mechanics and Physics of Solids, vol.43, issue.3, pp.389-413, 1995.
DOI : 10.1016/0022-5096(94)00069-H

F. Xiao and W. A. Et-curtin, Numerical Investigation of Polymer Craze Growth and Fracture, Macromolecules, vol.28, issue.5, pp.1654-1660, 1995.
DOI : 10.1021/ma00109a043

A. F. Yee, The yield and deformation behaviour of some polycarbonate blends, Journal of Materials Science, vol.154, issue.4, p.757, 1977.
DOI : 10.1007/BF00548168

A. F. Yee and R. A. Et-pearson, Toughening mechanisms in elastomermodified epoxies. part 1 : Mechanical studies, Journal of Materials Science, vol.29, pp.2462-2474, 1986.

X. C. Zhang, M. F. Butler, and R. E. Et-cameron, The ductile???brittle transition of irradiated isotactic polypropylene studied using simultaneous small angle X-ray scattering and tensile deformation, Polymer, vol.41, issue.10, pp.3797-3807, 2000.
DOI : 10.1016/S0032-3861(99)00594-7

Z. Zhang and H. Et-hauge, Fatigue and Fracture mechanics, chapitre On the Gurson micro?mechanical parameters, pp.364-383, 1999.

J. X. Zhu, D. J. Pine, and D. A. Et-weitz, Internal reflection of diffusive light in random media, Physical Review A, vol.44, issue.6, p.3948, 1991.
DOI : 10.1103/PhysRevA.44.3948