M. Abo, Elkhier Elasto-plastic finite element modelling of strip cold rolling using Eulerian fixed mesh technique Finite Element in Analysis and Design, pp.323-334, 1997.

]. J. Aymone04 and . P. Baaijens98-]-f, Aymone Mesh motion techniques for the ALE formulation in 3D large deformation problems Baaijens Mixed finite element methods for viscoelastic flow analysis : a review, International Journal for Numerical Methods in Engineering Journal of Non-Newtonian Fluid Mechanics, vol.59, issue.79, pp.1879-1908, 1998.

]. J. Barboza04, Barboza Traitement du contact entre corps déformables et calcul parallèle pour la simulation 3D du forgeage multicorps Thèse de doctorat, 2004.

]. J. Batina89, Batina Unsteady Euler airfoil solutions using unstructured dynamic meshes AIAA 27th Aerospace Sciences Meeting, pp.89-0150, 1989.

M. Bellet and V. D. Fachinottibenson89-]-d, ALE method for solidification modelling Benson An efficient, accurate, simple ALE method for nonlinear finite element programs, Neuschütz, G. Mücke Experiences with a flatness control system including axial roll shifting Proc. 4th Int. Steel Rolling Conference, Association Technique de la Sidérurgie (ATS), pp.4355-4381, 1987.

]. R. Boman06, L. Boman, Q. V. Papeleux, and J. Bui, Application of the Arbitrary Lagrangian Eulerian formulation to the numerical simulation of cold roll forming process, Journal of Materials Processing Technology, vol.177, issue.1-3, pp.621-625, 2006.
DOI : 10.1016/j.jmatprotec.2006.04.120

]. H. Borouchaki05, J. Borouchaki, P. Villard, and P. L. Laug, Surface mesh enhancement with geometric singularities identification, Computer Methods in Applied Mechanics and Engineering, vol.194, issue.48-49, pp.4885-4891, 2004.
DOI : 10.1016/j.cma.2004.11.017

F. Casadei and J. P. , An algorithm for permanent fluid-structure interaction in explicit transient dynamics, Computer Methods in Applied Mechanics and Engineering, vol.128, issue.3-4, pp.231-289, 1995.
DOI : 10.1016/0045-7825(95)00843-8

J. Cescutti, Contribution à la simulation numérique du forgeage Thèse de doctorat, 1989.

]. J. Chenot95 and M. Chenot, Bellet The ALE method for the numerical simulation of material forming processes, Proc. NUMIFORM, pp.39-48, 1995.

]. J. Chenot98, L. Chenot, T. Fourment, R. Coupez, and E. Ducloux, Wey Forge3®: a general tool for practical optimisation of forging sequence of complex 3-D parts in industry, Proc. ICFT'98, pp.113-122, 1991.

]. K. Davey02 and M. J. Davey, A practical method for finite element ring rolling simulation using the ALE flow formulation, International Journal of Mechanical Sciences, vol.44, issue.1, pp.165-190, 2002.
DOI : 10.1016/S0020-7403(01)00080-7

]. C. Degand02 and C. Degand, Fahrat A three-dimensional torsional spring analogy method for unstructured dynamic meshes Computers and Structures, pp.305-316, 2002.

]. U. Dixit95 and P. M. Dixit, An analysis of the steady-state wire drawing of strain-hardening materials, Journal of Materials Processing Technology, vol.47, issue.3-4, pp.201-229, 1995.
DOI : 10.1016/0924-0136(95)85000-7

]. U. Dixit96 and P. M. Dixit, Dixit A finite element analysis of flat rolling and application of fuzzy set theory Lagrangian and Eulerian finite element techniques for transient fluid-structure interaction problems Trans, Dixit A study on residual stresses in rolling International Journal of Machine Tools and Manufacture 4th SMIRT Conference, pp.947-969, 1977.

]. J. Donea82, S. Donea, and J. P. Giuliani, An arbitrary lagrangian-eulerian finite element method for transient dynamic fluid-structure interactions, Computer Methods in Applied Mechanics and Engineering, vol.33, issue.1-3, pp.689-723, 1982.
DOI : 10.1016/0045-7825(82)90128-1

J. Donea and T. , Advances in computational mechanics, Nuclear Engineering and Design, vol.134, issue.1, pp.1-22, 1992.
DOI : 10.1016/0029-5493(92)90004-F

J. Donea, A. Huerta, J. Ph, and A. Ponthot, Rodriguez-Ferran Arbitrary Lagrangian-Eulerian methods Encyclopedia of Computational Mechanics, 2004 [Dvorkin93] E.N. Dvorkin, E.G. Petöcz An effective technique for modelling 2D metal forming processes using an Eulerian technique Engineering Computations, pp.413-437, 1993.

]. R. Fabik08 and S. Fabik, Aksenov Optimization of crop losses by finite element simulation of slab edging Steel Research International, Special Edition Metal Forming Conference, pp.432-439, 2008.

]. C. Farhat98, C. Farhat, B. Degand, and M. Koobus, Torsional springs for two-dimensional dynamic unstructured fluid meshes, Computer Methods in Applied Mechanics and Engineering, vol.163, issue.1-4, pp.231-245, 1998.
DOI : 10.1016/S0045-7825(98)00016-4

]. P. Gratacos94 and J. Gratacos, Coupu 3D Finite-Element code application in hot rolling Revue de Métallurgie ? Cahiers d'informations techniques, pp.1671-1679, 1994.

]. S. Guerdoux07, Guerdoux Simulation numérique du soudage par frottement-malaxage Thèse de doctorat, 2007.

]. W. Habashi00, J. Habashi, Y. Dompierre, D. Bourgault, M. Ait-ali-yahia et al., Anisotropic mesh adaptation: towards user-independent, mesh-independent and solver-independent CFD. Part I: general principles, Hachani Amélioration du traitement de contact pour les procédés à faibles zones de contact Thèse de doctorat en cours, pp.725-744, 1996.
DOI : 10.1002/(SICI)1097-0363(20000330)32:6<725::AID-FLD935>3.0.CO;2-4

A. Hacquin, P. Montmitonnet, and J. P. , A three-dimensional semi-analytical model of rolling stand deformation with finite element validation, European Journal of Mechanics - A/Solids, vol.17, issue.1, pp.79-106, 1998.
DOI : 10.1016/S0997-7538(98)80065-X

T. Hama, T. Nagata, C. Teodosiu, A. Makinouchi, H. Hu et al., Takuda Finite-element simulation of springback in sheet metal forming using local interpolation for tool surfaces Liu An ALE hydrodynamic lubrication finite element method with application to strip rolling Viscous flow with large free surface motion Huetink Analysis of metal forming processes based on a combined Eulerian-Lagrangian finite element formulation, International Journal of Mechanical Sciences International Journal for Numerical Methods in Engineering Computer Methods in Applied Mechanics and Engineering Proc. NUMIFORM International Journal for Numerical Methods in Engineering, vol.50, issue.308, pp.175-192, 1982.

]. J. Huetink90, P. T. Huetink, and J. Vreede, Progress in mixed Eulerian-Lagrangian finite element simulation of forming processes, International Journal for Numerical Methods in Engineering, vol.24, issue.8, pp.1441-1457, 1990.
DOI : 10.1002/nme.1620300808

]. J. Huetink93 and H. G. Huetink, Mooi Application of numerical simulation in design and control of forming processes, Journal de physique IV, vol.3, pp.1129-1134, 1993.

]. T. Hughes81, W. K. Hughes, T. K. Liu, . M. Hwang02-]-s, C. G. Hwang et al., Lagrangian-Eulerian finite element formulation for incompressible viscous flows, Computer Methods in Applied Mechanics and Engineering, vol.29, issue.3, pp.329-349, 1981.
DOI : 10.1016/0045-7825(81)90049-9

]. A. Kainz02 and A. Kainz, Obereder Finite Element Simulations of the Visco-Plastic Strip Behavior for Steady State Flat Hot, Rolling Processes Proc. Fifth World Congress on Computational Mechanics, pp.1017-1022, 2002.

A. Kainz, E. Parteder, M. Widder, and K. , Zeman Elasto-Plastic Simulation Concepts For Profile Transfer And Flatness Prediction, Flat Hot Rolling Proc. NUMIFORM, pp.1017-1022, 2007.

H. J. Kim, T. H. Kim, and S. M. , A new free surface scheme for analysis of plastic deformation in shape rolling, Journal of Materials Processing Technology, vol.104, issue.1-2, pp.81-93, 2000.
DOI : 10.1016/S0924-0136(00)00519-7

]. M. Knapinski06, R. Knapinski, and C. Kopp, The numerical analysis of roll deflection during plate rolling, Journal of Materials Processing Technology, vol.175, issue.1-3, pp.257-265, 2004.
DOI : 10.1016/j.jmatprotec.2005.04.051

]. Lee89, P. R. Lee, T. B. Dawson, ]. Li82, S. Li et al., Kobayashi Rigid-Plastic Finite Element Analysis of Strain Rolling Transactions of the ASME Orkisz The finite differences method at arbitrary irregular grids and its application in applied mechanics Computers and Structures Rowe Elastic-Plastic Finite Element Modelling of Cold Rolling of Rowe Simulation of the Cold Rolling of Strip using an Elastic-Plastic Finite Element technique Finite Element Modelling of Deformation and Spread in Slab Rolling, Dewhurst Bulge prediction in steady state bar rolling processes Proc. NUMIFORM FEM Analysis of Rolling Pressure Along Strip Width in Cold Rolling Process Journal of Iron and Steel Research, InternationalLöhner95] R. Löhner Regridding Surface Triangulations Journal of Computational Physics, pp.323-330, 1980.

]. G. Losilla02, P. Losilla, M. Montmitonnet, and P. Bouzaiane, Clément Modélisation du laminage circulaire par éléments finis, Calculs thermomécaniques et calculs microstructuraux

]. A. Masud97, T. J. Masud, . M. Mcivor97-]-a, and R. J. Ivor, Hughes A Space-Time Galerkin/Least-Squares Finite Element Formulation of the Navier-Stokes Equations for Moving Domain Problems Computer Methods in Applied Mechanics and Engineering Valkenburg A comparison of local surface geometry estimation methods Machine Vision and Application, Meek00] D.S. Meek, D.J. Walton On surface normal and Gaussian curvature approximations given data sampled from a smooth surface Computer Aided Geometric Design, pp.91-126, 1997.

]. P. Montmitonnet02b, R. Montmitonnet, M. Logé, Y. Hamery, J. Chastel et al., Aubin 3D elastic-plastic finite element simulaton of cold pilgering of zircaloy tubes Montmitonnet Hot and cold strip rolling processes Montmitonnet Comparison of profile prediction models for strip rolling IOM3 ConfAchieving profile and flatness in flat products Oda Simulation of plane-strain rolling by the rigid-plastic finite element method, Mroz06] S. Mroz, A. Milenin Numerical modelling of the metal flow and stock bending during the rolling of unequal angle bar Journal of Materials Processing Technology, pp.125-126, 1982.

A. Mukhopadhyay, I. C. Howard, and C. M. , Development and validation of a finite element model for hot rolling using ABAQUS/STANDARD, Materials Science and Technology, vol.32, issue.9, pp.1123-1133, 2004.
DOI : 10.1002/nme.1620210507

S. Mulot, A. Hacquin, P. Montmitonnet, and J. , A fully 3D finite element simulation of cold pilgering, Journal of Materials Processing Technology, vol.60, issue.1-4, pp.505-512, 1996.
DOI : 10.1016/0924-0136(96)02378-3

T. Nagata, Simple local interpolation of surfaces using normal vectors, Computer Aided Geometric Design, vol.22, issue.4, pp.327-347, 2005.
DOI : 10.1016/j.cagd.2005.01.004

]. A. Nilsson98 and F. Nilsson, Padmanabhan A framework for development of surface smoothing procedures in large deformation frictional contact analysis Finite element in Analysis and Design, hot strop rolling Journal of Materials Processing Technology, pp.80-81, 1998.

]. L. Piegl97 and W. Piegl, Tiller The NURBS Book Ed, 1997.

]. L. Piegl05, W. Piegl, and W. Ma, Tiller An alternative method of curve interpolation The Visual Computer, pp.104-117, 2005.

]. J. Ponthot98 and T. Ponthot, Arbitrary Lagrangian-Eulerian formulation for element-free Galerkin method, Computer Methods in Applied Mechanics and Engineering, vol.152, issue.1-2, pp.19-46, 1998.
DOI : 10.1016/S0045-7825(97)00180-1

]. K. Traore01, Traoré Simulation thermomécanique du laminage circulaire. Développement d'une formulation quasi-eulérienne tridimensionnelle sur une architecture parallèle Thèse de doctorat, 2001.

]. P. Schreurs86, F. E. Schreurs, and W. A. Veldpaus, Simulation of forming processes, using the arbitrary eulerian-lagrangian formulation, Duan A new spread formula for hot flat rolling of aluminium alloys Modelling and Simulation in Materials Science and Engineering, pp.19-36, 1986.
DOI : 10.1016/0045-7825(86)90076-9

]. J. Synka03 and A. Synka, A novel mixed Eulerian???Lagrangian finite-element method for steady-state hot rolling processes, Wisselink, J. Huetink 3D FEM simulation of stationary metal forming processes with applications to slitting and rolling Journal of Materials Processing Technology, pp.2043-2060, 2003.
DOI : 10.1016/j.ijmecsci.2003.12.008

]. K. Yamada89, S. Yamada, S. Ogawa, T. Hamauzu, S. Kikuma-three-yamada et al., Ataka Three-dimensional analysis of flat rolling using rigid-plastic finite element method coupled with roll deformation analysis Kiuchi Three-dimensional simulation system for coupled elastic/rigid-plastic deformation of rolls and workpieces in strip rolling processes A simple error estimator and adaptive procedure for practical engineering analysis Error estimation and adaptivity in flow formulation for forming problems, Chenot Three-Dimensional Model for Strip Hot Rolling Journal of Iron and Steel Research, InternationalSPR) and adaptive finite element refinement Computer Methods in Applied Mechanics and Engineering, pp.375-380, 1987.

]. O. Zienkiewicz99, B. Zienkiewicz, J. Boroomand, . C. Zzienkiewicz00-]-o, and R. L. Zienkiewicz, Zhu Recovery procedures in error estimation and adaptivity. Part I : Adaptivity in nonlinear problems of elasto-plasticity behaviour Computer methods in applied mechanics and engineering Taylor The Finite Element Method, pp.111-125, 1999.