M. Avrami, Kinetics of Phase Change. I General Theory, The Journal of Chemical Physics, vol.7, issue.12, pp.1103-1112, 1939.
DOI : 10.1063/1.1750380

M. F. Ashby, The deformation of plastically non-homogeneous materials, Philosophical Magazine, vol.245, issue.170, pp.399-424, 1970.
DOI : 10.1016/0001-6160(64)90034-3

J. Agren, A revised expression for the diffusivity of carbon in binary Fe???C austenite, Scripta Metallurgica, vol.20, issue.11, pp.1507-1510, 1986.
DOI : 10.1016/0036-9748(86)90384-4

L. Allais, Effet de la Morphologie et de la Répartition Spatiale des Phases sur le Comportement Mécanique des Matériaux Biphasés, 1991.

C. Aliaga, Simulation numérique par éléments finis en 3D du comportement thermomécanique au cours du traitement thermique d'aciers : application à la trempe de pièces forgées ou coulées, 2000.

Y. Adda, J. Dupouy, J. Philibert, and Y. Quere, Eléments de métallurgie physique Tome 4 : diffusion transformation, Edité par le Commissariat à l'Energie Atomique, 1978.

Y. Bergström, A dislocation model for the stress-strain behaviour of polycrystalline ??-Fe with special emphasis on the variation of the densities of mobile and immobile dislocations, Materials Science and Engineering, vol.5, issue.4, pp.193-200, 1970.
DOI : 10.1016/0025-5416(70)90081-9

M. Bornert, Morphologie Microstructurale et Comportement Mécanique; Caractérisations Expérimentales, Approches par Bornes et Estimations Autocohérentes Généralisées, Thèse de doctorat de l'Ecole Nationale des Ponts et Chaussées, 1996.

G. J. Baxter, T. Furu, J. A. Whiteman, and C. M. Sellars, The influence of transient strain-rate deformation conditions on the deformed microstructure of aluminium alloy Al???1% Mg, Acta Materialia, vol.47, issue.8, pp.8-2367, 1999.
DOI : 10.1016/S1359-6454(99)00112-3

F. H. Bertrand, M. R. Gadbois, and P. A. Tanguy, Tetrahedral elements for fluid flow, International Journal for Numerical Methods in Engineering, vol.1, issue.6, pp.1251-1267, 1992.
DOI : 10.1002/nme.1620330610

G. Bao, J. W. Hutchinson, and R. M. Mcmeeking, The flow stress of dual-phase, non-hardening solids, Mechanics of Materials, vol.12, issue.2, pp.85-94, 1991.
DOI : 10.1016/0167-6636(91)90056-6

M. Berveiller and A. Zaoui, An extension of the self-consistent scheme to plastically-flowing polycrystals, Journal of the Mechanics and Physics of Solids, vol.26, issue.5-6
DOI : 10.1016/0022-5096(78)90003-0

. Mech, . Phys, R. M. Christensen, and K. H. Lo, Solutions for Effective Shear Properties in Three Phase Sphere and Cylinder Models, J. Mech. Phys. Solids, vol.26, issue.27, pp.325-344, 1979.

F. Colonna, E. Massoni, S. Denis, J. Chenot, J. Wendenbaum et al., On thermo-elasticviscoplastic analysis of cooling processes including phase changes, J. Mater. Process. Tech, pp.34-525, 1992.

G. R. Canova, H. R. Wenk, and A. Molinari, Deformation Modelling of Multiphase Polycrystals : Case of a Quartz-Mica Aggregate; Acta metall, pp.1519-1530, 1992.

S. Denis, Modélisation des interactions contrainte-transformation de phase et calcul par éléments finis de la genèse des contraintes internes au cours de la trempe des aciers, Thèse de doctorat de l'Institut National, 1987.

L. Durand, Etude du Comportement Mécanique des matériaux Biphasés au Moyen de la Méthode des Eléments Finis; Res Mechanica 29, pp.257-285, 1990.

S. Denis, C. Baiso, F. Fernandes, and A. Simon, Contribution des contraintes internes d'origine thermique dans le calcul de l'avancement des transformations de phases en refroidissement continu d'un acier XC80

S. Duly, D. Baxter, G. J. Shercliff, H. R. Whiteman, J. A. Sellars et al., Microstructure and local crystallographic evolution in an Al-1% Mg alloy deformed at intermediate temperature and high strain-rate, Octobre Acta Mat, vol.44, pp.541-553, 1986.

R. D. Doherty, D. A. Hugues, F. J. Humphreys, J. J. Jonas, D. Jensen et al., Current issues in recrystallization : a review, pp.238-219, 1997.

L. Decker and D. Jeulin, Simulation 3D de mat??riaux al??atoires polycristallins, Revue de M??tallurgie, vol.97, issue.2
DOI : 10.1051/metal/200097020271

M. Dong and S. Schmauder, Modeling of metal matrix composites by a self-consistent embedded cell model, Acta Materialia, vol.44, issue.6, pp.2465-2478, 1996.
DOI : 10.1016/1359-6454(95)00345-2

Y. Estrin and H. Mecking, A unified phenomenological description of work hardening and creep based on oneparameter models, Acta Met, vol.32, pp.1-57, 1984.

Y. Estrin, L. S. Toth, A. Molinari, and Y. Bréchet, A dislocation-based model for all hardening stages in large strain deformation, Acta Materialia, vol.46, issue.15, pp.5509-5522, 1998.
DOI : 10.1016/S1359-6454(98)00196-7

G. Dirk, Anwendung der Finite-Elemente-Methode zur integrativen Berechnung von Mikrostrukturinformationen in der Umformtechnik, 1999.

P. Gilormini, A Critical Evaluation for Various Nonlinear Extensions of the Self-Consistent Model
DOI : 10.1007/978-94-009-1756-9_9

J. W. Hutchinson, Bounds and Self-Consistent Estimates for Creep of, Polycrystalline Materials, Proc R

. Soc and . A. Lond, [H96] Hacquin A.: Modélisation thermomécanique tridimensionelle du laminage ? couplage bande / cylindre, pp.101-127, 1976.

Y. Hwu, J. G. Lenard, and J. J. Too, The Prediction of the Flow Stress of an Extra-Low Carbon Steel in the Two-Phase Region Using Continuous Cooling Curves, Journal of Engineering Materials and Technology, vol.118, issue.4, pp.463-470, 1996.
DOI : 10.1115/1.2805943

Z. Hashin and S. Shtrikman, A variational approach to the theory of the elastic behaviour of multiphase materials, Journal of the Mechanics and Physics of Solids, vol.11, issue.2, pp.127-140, 1963.
DOI : 10.1016/0022-5096(63)90060-7

E. Hervé and A. Zaoui, Modelling the Effective Behavior of Nonlinear Matrix-Inclusion Composites; Eur, J

E. Hervé and A. Zaoui, N-Layered Inclusion-Based Micromechanical Modelling, Int. J. Engng Sci, vol.31

T. Joncheray, Déformation Plastique dans le Domaine Mixte ? et ? pour divers Aciers de Masse

J. J. Jonas, R. A. Holt, and C. E. Coleman, Plastic stability in tension and compression, Acta Metallurgica, vol.24, issue.10, pp.911-918, 1976.
DOI : 10.1016/0001-6160(76)90039-0

J. J. Jonas and H. J. Mcqueen, Recovery and recrystallyzation during High temperature deformation, Treatise on Material Science and Technology Vol, vol.6, pp.393-493, 1976.

E. Kröner, Statistical continuum mechanics; International Center for Mechanical Sciences, 1971.

M. Kandel, D. Grandemange, T. Iung, M. Cauquis, and H. Tsukahara, Modélisation des transformations de phase des aciers C-Mn : transformations ferritique et perlitique, Note IRSID, pp.99-2168, 1999.

O. Kwon, K. Lee, S. Park, J. J. Jonas, T. R. Bieler et al., Suppression of recrystallization in microalloyed steels during hot deformation Advances in Hot Deformation Textures and Microstructures " édité The Minerals, 1994.

T. A. Kop, P. G. Remijn, V. Svetchnikov, J. Sietsma, and S. Van-der-zwaag, Some Observations on the effect of austenitisation conditions on the Transformation kinetics in an HSLA steel and related C-Mn steels

U. F. Kocks and M. G. Stout, Torsion testing for general constitutive relations: Gilles Canova's Master's Thesis, Modelling and Simulation in Materials Science and Engineering, vol.7, issue.5, 1999.
DOI : 10.1088/0965-0393/7/5/302

L. Durand, Models of tensile behaviour of two-phase alloys from their components, Materials Science and Technology, vol.1, issue.2, pp.105-109, 1987.
DOI : 10.1098/rspa.1957.0133

D. J. Lloyd, R. A. Lebensohn, and G. R. Canova, Dislocation accumulation in cold rolled Al alloys obtained from density measurements A self-Consistent Approach for Modelling Texture Development of, pp.399-404, 1999.

L. Hazif, R. , T. De-montpreville, and C. , 3-D Models for the Calculation of the Mechanical Behaviour of Two Phase Alloys, pp.357-362, 1986.

A. Laasraoui, J. J. Jonas, R. A. Lebensohn, and C. N. Tomé, Recrystallization of austenite after deformation at high temperatures and strain rates???Analysis and modeling, Metallurgical Transactions A, vol.210, issue.1, pp.151-160, 1991.
DOI : 10.1016/0001-6160(88)90246-5

D. Muller, Influence de l'écrouissage non local et de l'hétérogénéisation intragranulaire sur le comportement des aciers polycristallins, Thèse de l'université de Metz, 1994.

A. Molinari, G. R. Canova, and S. Ahzi, A self consistent approach of the large deformation polycrystal viscoplasticity, Acta Metallurgica, vol.35, issue.12, pp.2983-2994, 1987.
DOI : 10.1016/0001-6160(87)90297-5

F. Montheillet and P. Gilormini, Predicting the mechanical behavior of two-phase materials with cellular automata, International Journal of Plasticity, vol.12, issue.4, pp.561-574, 1996.
DOI : 10.1016/S0749-6419(96)00020-4

H. Mecking and U. F. Kocks, Kinetics of flow and strain-hardening, Acta Metallurgica, vol.29, issue.11, pp.1865-1875, 1981.
DOI : 10.1016/0001-6160(81)90112-7

H. Moulinec and P. Suquet, A Fast Numerical Method for Computing the Linear and Nonlinear Mechanical Properties of Composites, C.R. Acad Sci Paris t, pp.318-1417, 1994.

T. Mori and K. Tanaka, Average stress in matrix and average elastic energy of materials with misfitting inclusions, Acta Metallurgica, vol.21, issue.5, pp.597-629, 1973.
DOI : 10.1016/0001-6160(73)90064-3

A. Molinari and L. S. Toth, Tuning a self consistent viscoplastic model by finite element results???I. Modeling, Acta Metallurgica et Materialia, vol.42, issue.7
DOI : 10.1016/0956-7151(94)90324-7

A. Modeling, E. Metall-nes, S. Nasser, T. Okinaka, and L. Ni, Modelling of Work hardening and stress saturation in fcc metals A physically-based constitutive model for BCC crystals with application to polycrytalluine Tantalum, Progress in Mat. Sc. J. Mech. Phys. Solids Vol, vol.42, issue.46 6, pp.7-2453, 1994.

S. Neti, V. Ankem, and S. , Finite Element Method Modeling of Deformation Behavior of Two-phase Materials, P95] Pilvin P. : Sidolo Notice d'utilisation, pp.145-192, 1991.

F. B. Prinz and A. S. Argon, The evolution of plastic resistance in large strain plastic flow of single phase subgrain forming metals, Acta Metallurgica, vol.32, issue.7, pp.7-1021, 1984.
DOI : 10.1016/0001-6160(84)90004-X

P. Castaneda and P. , The effective mechanical properties of nonlinear isotropic composites, Journal of the Mechanics and Physics of Solids, vol.39, issue.1
DOI : 10.1016/0022-5096(91)90030-R

W. I. Pumphrey, F. W. Jones, Y. Pan, and J. G. Lenard, Dynamic recovery in Nb-Ti IF steels during hot and warm working, Instantaneous Constitutive Relations, pp.1271-1286, 1948.

M. Pietrzyk, C. Roucoules, and P. D. Hodgson, Dislocation model foe work hardening and recrystallization applied to the finite-element simulation of het forming; Proceeding de Numiform 95 : Simulation of Materials Processing : Theory, Methods and Applications " , édité par Shen & Dawson p315-320 (1995) [R29] Reuss A. : Calculation of the flow limits of mixed crystals on the basis of the plasticity of monocrystals, Z. angew. Math. Mech, vol.9, pp.49-58, 1929.

W. Roberts, Krauss) Metal Park, Ohio, RT 97] Rudiono, Tomota Y. : Applicationof the Secant Method to Prediction of Flow Curves, pp.109-184, 1984.

K. S. Sinha, Ferrous Physical Metallurgy, Butterworths, 1989.

P. Suquet, Overall Properties of Nonlinear Composites
DOI : 10.1007/978-94-009-1756-9_19

C. M. Sellars, The evolution of grain size during hot rolling of austenite; Thermomechanical processing of steel ? J.J. Jonas symposium, pp.3-19, 2000.

Y. Shen, M. Finot, A. Needleman, and S. Suresh, Effective plastic response of two-phase composites, Acta Metallurgica et Materialia, vol.43, issue.4, pp.1701-1722, 1995.
DOI : 10.1016/0956-7151(94)00346-J

B. Sundman, B. Jansson, and J. O. Andersson, The Thermo-Calc databank system, Calphad, vol.9, issue.2, pp.2-153, 1985.
DOI : 10.1016/0364-5916(85)90021-5

T. Steinkopff and M. Sautter, Simulating the elasto-plastic behavior of multiphase materials by advanced finite element techniques Part I: a rezoning technique and the multiphase element method, Computational Materials Science, vol.4, issue.1, pp.10-14, 1995.
DOI : 10.1016/0927-0256(95)00008-E

T. Steinkopff and M. Sautter, Simulating the elasto-plastic behavior of multiphase materials by advanced finite element techniques Part II: simulation of the deformation behavior of Ag-Ni composites, Computational Materials Science, vol.4, issue.1, pp.15-22, 1995.
DOI : 10.1016/0927-0256(95)00009-F

C. M. Sellars, W. J. Tegart, G. Mc, T. Siegmund, E. Werner et al., La Relation entre la Résistance et la Structure dans la Déformation à Chaud, Structure ?Property Relations in Duplex Materials, Comp, pp.731-746, 1966.

S. Tiem, M. Berveiller, and G. R. Canova, Grain shape effects on the slip system activity and on the lattice rotations, TI] Techniques de l'ingénieur, pp.2139-2149, 1986.
DOI : 10.1016/0001-6160(86)90159-8

J. J. Urcola and C. M. Sellars, Influence of changing strain rate on microstructure during hot deformation, Acta Metallurgica, vol.35, issue.11, pp.2649-2657, 1987.
DOI : 10.1016/0001-6160(87)90264-1

J. J. Urcola and C. M. Sellars, Effect of changing strain rate on stress-strain behaviour during high temperature deformation, Acta Metallurgica, vol.35, issue.11, pp.2637-2647, 1987.
DOI : 10.1016/0001-6160(87)90263-X

W. Voigt, Über die Beziehung zwischen den beiden Elasticitätsconstanten isotroper Körper, Ann. Phys. (Leipzig), vol.38, pp.573-587, 1889.

P. Vernusse, Comportement Mécanique d'un Matériau Microhétérogène. Application à la Déformation à

D. Chaud, Deux Phases Ductiles, Thèse de doctorat de l'INPG et de l'Ecole Nationale Supérieure des Mines de Saint-Etienne, 1993.

M. Verdier, S. G. Velthuis, N. H. Van-dijk, M. T. Rekveldt, J. Sietsma et al., Restauration dans les alliages aluminium-magnesium A threedimensional model for the develoment of the microstructure in steel during slow cooling, pp.277-218, 1996.

M. Veaux, J. C. Louin, J. P. Houin, S. Denis, P. Archambault et al., Bainitic transformation under stress in medium alloyed steels, Proceeding de 4 th European Mechanics of Materials Conference, Processes Microstructures Mechanical Properties, Ed. E. Gautier, 2000.
DOI : 10.1051/jp4:2001423

L. J. Walpole, On the overall elastic moduli of composite materials, Journal of the Mechanics and Physics of Solids, vol.17, issue.4, pp.235-251, 1969.
DOI : 10.1016/0022-5096(69)90014-3

G. J. Weng, The overall elastoplastic stress-strain relations of dual-phase metals, Journal of the Mechanics and Physics of Solids, vol.38, issue.3
DOI : 10.1016/0022-5096(90)90007-Q

D. B. Zahl, S. Schmauder, R. M. Mcmeeking, O. C. Zienkiewicz, and R. L. Taylor, Transverse strength of metal matrix composites reinforced with strongly bonded continuous fibers in regular arrangements, Acta Metallurgica et Materialia, vol.42, issue.9, pp.2983-2997, 1994.
DOI : 10.1016/0956-7151(94)90395-6

P. Test-linéaire-multimatériaux and .. , Erreur ! Signet non défini. 3.2.4 Formulations respectant les discontinuités en pression

L. Bilan-sur, Erreur ! Signet non défini, Erreur ! Signet non défini. 4.2. Structures statistiquement isotropes

.. Mécanisme-de-la-transformation-ferritique, Erreur ! Signet non défini, Erreur ! Signet non défini. 2.3. Diagramme Transformation en Refroidissement Continu (TRC) .. Erreur ! Signet non défini. 2.4. Dépouillement d'un essai TRC sur dilatomètre ............................. Erreur ! Signet non défini. 2.4

.. Effet-des-conditions-de-déformation and . Defini, Erreur ! Signet non défini

.. Procédure-expérimentale, Erreur ! Signet non défini. 1.3. Rhéologie extrapolée de chaque phase, Erreur ! Signet non défini. 2.3. Simulations numériques