The automotive connector: the influence of powering and lubricating a fretting contact interface, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, vol.106, issue.6, pp.615-623, 2000. ,
DOI : 10.1243/0954407001527484
Corrosion of precious metal plated copper alloys due to mixed flowing gas exposure, pp.193-202, 1990. ,
Microscopic properties of tin intermetallic layers : influence on the performances of electrical contacts, Proceedings of the 24 th international conference on electrical contacts Saint Malo, pp.210-215, 2008. ,
URL : https://hal.archives-ouvertes.fr/hal-00351367
Electroless Co-P for diffusion barrier in Pb-free solder, Electrochimica acta, pp.50-4621, 2005. ,
The Effects of Substrate on the Contact Resistance of Tarnish Films, IEEE Transactions on Parts, Materials and Packaging, vol.7, issue.1, pp.6-10, 1971. ,
DOI : 10.1109/TPMP.1971.1136442
Process design of Cu(Sn) alloy deposition for highly reliable ultra large-scale integration interconnects, Thin Solid Films, vol.491, issue.1-2, pp.491-221, 2005. ,
DOI : 10.1016/j.tsf.2005.05.047
Sn deposition onto Cu and alloy layer growth by a contact immersion process, Thin solid films, pp.121-126, 2003. ,
Cu/Sn interfacial reactions: thin-film case versus bulk case, Materials Chemistry and Physics, vol.46, issue.2-3, pp.217-223, 1996. ,
DOI : 10.1016/S0254-0584(97)80016-8
La diffusion dans les métaux, Techniques de l'ingénieur M55, 1994. ,
Interdiffusion and reaction in bimetallic Cu-Sn thin films, Acta Metallurgica, vol.21, issue.4, pp.347-354, 1973. ,
DOI : 10.1016/0001-6160(73)90190-9
Effect of intermetallic phases on the performance of tin-plated copper connections and conductors, Proceedings of the Forty-Ninth IEEE Holm Conference on Electrical Contacts, 2003., pp.124-131, 2003. ,
DOI : 10.1109/HOLM.2003.1246487
Cu-Sn Intermetallic Compound Growth in Hot-Air-Leveled Tin at and below 100°C, AMP Journal of technology, vol.3, pp.46-54, 1993. ,
An isochronal kinetic study of intermetallic compound growth in Sn/Cu thin film couples, Thin solid films, pp.2781-2785, 2006. ,
Intermetallic Growth and Contact Resistance of Tin Contacts After Aging, IEEE Transactions on Parts, Hybrids, and Packaging, vol.12, issue.1, pp.33-39, 1976. ,
DOI : 10.1109/TPHP.1976.1135097
Analysis of low-temperature intermetallic growth in copper-tin diffusion couples, Metallurgical Transactions A, vol.201, issue.6, pp.857-864, 1992. ,
DOI : 10.1007/BF02675563
The impact of sliding motion and current load on the deterioration of tin-coated contact terminals, IEEE Transactions on Components and Packaging Technologies, vol.23, issue.2, pp.278-285, 2000. ,
DOI : 10.1109/6144.846765
Eléments de métallurgie physique, rappels, Documentation française, 1976. ,
Intermetallic growth and Kirkendall effect manifestations in Cu/Sn and Au/Sn diffusion couples, Zeitschrift fur metallkunde, pp.95-913, 2004. ,
Effect of Electrodeposition Conditions on Kirkendall Void Formation between Electrodeposited Cu Film and Sn-3.5Ag Solder, 2007 Proceedings 57th Electronic Components and Technology Conference, pp.1620-1625, 2007. ,
DOI : 10.1109/ECTC.2007.374011
Physical and mechanical properties of intermetallic compounds commonly found in solder joints, in : The metal science of joining, J ,
The minerals, metals and material society, pp.165-174, 1992. ,
Elastic behaviour, Intermetallic compounds, 1967. ,
Nanoindentation identifications of mechanical properties of Cu6Sn5, Cu3Sn, and Ni3Sn4 intermetallic compounds derived by diffusion couples, Materials Science and Engineering: A, vol.485, issue.1-2, pp.485-305, 2008. ,
DOI : 10.1016/j.msea.2007.07.093
Interdiffusion at Bimetallic Electrical Interfaces, IEEE Transactions on Components, Hybrids, and Manufacturing Technology, vol.9, issue.1, pp.106-116, 1986. ,
DOI : 10.1109/TCHMT.1986.1136613
Oxidation of copper in controlled clean air and standard laboratory air at 50°C to 150°C , Applications of surface science, pp.558-577, 1979. ,
Oxydation des métaux, 1964. ,
Fiabilisation des connecteurs électriques utilisés pour les fonctions de diagnostic embarqué des automobiles, Thèse de doctorat, 2003. ,
Electrical and frictional performance of tin coated contacts exposed to wear and fretting-corrosion, 2006. ,
Oxidation study of pure tin and its alloys via electrochemical reduction analysis, Journal of Electronic Materials, vol.30, issue.5, pp.5-635, 2005. ,
DOI : 10.1007/s11664-005-0077-6
Intermittency phenomena in electrical connectors, IEEE Transactions on Components and Packaging Technologies, vol.24, issue.3, pp.3-370, 2001. ,
DOI : 10.1109/6144.946482
Numerical study on current and thermal distributions of electrical contacts by FEM, Electrical Contacts, 2007 Proceedings of the 53rd IEEE Holm Conference on Electrical Contacts, pp.16-19, 2007. ,
DOI : 10.1109/HOLM.2007.4318228
Le contact électrique. Phénomènes physiques et matériaux, 1995. ,
Impact of corrosion on fretting damage of electrical contacts, Proceedings conference on electrical contacts IEEE, pp.25-27, 2006. ,
Experimental relationship between the electrical performance and the fretting regime, Proceedings of the 20th international conference on electrical contacts, pp.451-456, 2000. ,
Fretting-corrosion of tin-plated contacts, Tribology international, pp.616-628, 2007. ,
Constriction resistance and the real area of contact, British Journal of Applied Physics, vol.17, issue.12, pp.1621-1632, 1966. ,
DOI : 10.1088/0508-3443/17/12/310
Development of empirical equations for fretting-corrosion failure-time of tin-plated contacts, Wear, vol.265, issue.5-6, pp.756-762, 2008. ,
DOI : 10.1016/j.wear.2008.01.010
Numerical and experimental study of the contact resistance for high copper alloys in force domain 1-100N, Proceedings of the 24th International Conference on Electrical Contacts, pp.9-12, 2008. ,
URL : https://hal.archives-ouvertes.fr/hal-00830347
Dossier technique : les matériaux pour la connectique, le câblage et l'électronique ,
Fiabilisation des connecteurs électriques soumis à des vibrations, Thèse de doctorat, 2000. ,
Survey of Contact Fretting in Electrical Connectors, IEEE Transactions on Components, Hybrids, and Manufacturing Technology, vol.8, issue.1, pp.1-87, 1985. ,
DOI : 10.1109/TCHMT.1985.1136462
Fretting Corrosion of Separable Electrical Contacts, IEEE Transactions on Components, Hybrids, and Manufacturing Technology, vol.8, issue.1, pp.1-197, 1985. ,
DOI : 10.1109/TCHMT.1985.1136460
Etude des phénomènes de dégradation dans les contacts électriques bas niveau soumis à des micro vibrations, Thèse de doctorat, 1995. ,
Effect of temperature on the fretting corrosion of tin plated copper alloy contacts, Wear, vol.262, issue.3-4, pp.320-330, 2007. ,
DOI : 10.1016/j.wear.2006.05.020
Investigations on electrical contacts subjected to fretting motion, Proc. 21st International conference on electrical contacts, pp.189-195, 2002. ,
Revêtements et traitements de surface, approche technologique, 2005. ,
The electrodeposition of tin and its alloys, Finishing publications, 1995. ,
Nickelage électrolytique. Caractéristiques, Techniques de l'ingénieur M1610, 2002. ,
Spectrométrie d'émission des rayons X. Fluorescence X, Techniques de l'ingénieur (, 2000. ,
Cu-Sn intermetallic compound growth in hot ?air-leveled tin at and below 100°C, AMP journal of technology, vol.3, pp.46-54, 1993. ,
Interdiffusion in Cu-Sn solid solutions. Confirmation of anomalously large Kirkendall effect, Scripta metallurgica, pp.823-828, 1975. ,
Solid state diffusion in Cu???Sn and Ni???Sn diffusion couples with flip-chip scale dimensions, Intermetallics, vol.15, issue.3, pp.15-396, 2007. ,
DOI : 10.1016/j.intermet.2006.08.003
Diffusion dans les métaux, Techniques de l'ingénieur, p.55, 1994. ,
Rapid formation of intermetallic compounds by interdiffusion in the Cu-Sn system and in the Ni-Sn system, Acta materialia, vol.43, pp.329-337, 1995. ,
Effect of Electrodeposition Conditions on Kirkendall Void Formation between Electrodeposited Cu Film and Sn-3.5Ag Solder, 2007 Proceedings 57th Electronic Components and Technology Conference, pp.1620-1625, 2007. ,
DOI : 10.1109/ECTC.2007.374011
Effects of reactive diffusion on stress evolution in Cu???Sn films, Scripta Materialia, vol.51, issue.2, pp.51-167, 2004. ,
DOI : 10.1016/j.scriptamat.2004.03.032
Intermetallic growth and Kirkendall effect manifestations in Cu/Sn and Au/Sn diffusion couples, Zeitschrift fur metallkunde, pp.95-913, 2004. ,
Interdiffusion between Cu and Sn-rich solder: dominant diffusion species, IEEE electronics packaging technology conference, pp.81-85, 2000. ,
Intermetallic Growth and Contact Resistance of Tin Contacts After Aging, IEEE Transactions on Parts, Hybrids, and Packaging, vol.12, issue.1, pp.12-33, 1976. ,
DOI : 10.1109/TPHP.1976.1135097
Microscopic study of intermetallic compound formation by in situ method, Proceedings of the 24 th international conference on electrical contacts, pp.216-220, 2008. ,
DOI : 10.1051/epjap/2009207
Nanoindentation identifications of mechanical properties of Cu 6 Sn 5, Cu 3 Sn, and Ni 3 Sn 4 intermetallic compounds derived by diffusion couples, Materials science and engineering A, pp.485-305, 2008. ,
The growth of intermetallic compounds on common basis materials coated with tin and tin-lead alloys, Transactions of the institute of metal finishing, pp.68-74, 1976. ,
Interdiffusion and formation of intermetallic compounds in tin-copper alloy surface coatings, Surface technology, pp.57-63, 1977. ,
The effect of soldering process variables on the microstructure and mechanical properties of eutectic Sn-Ag/Cu solder joints, Journal of Electronic Materials, vol.66, issue.10, pp.1465-1472, 1995. ,
DOI : 10.1007/BF02655465
Effect of Cu stud microstructure and electroplating process on intermetallic compounds growth and reliability of flip-chip solder bump, IEEE transactions on components and packaging technologies, pp.24-682, 2001. ,
Microscopic properties of tin intermetallic layers : influence on the performances of electrical contacts, Proceedings of the 24 th international conference on electrical contacts, pp.210-215, 2008. ,
URL : https://hal.archives-ouvertes.fr/hal-00351367
Intermetallic compound growth on Ni, Ni substrates with Sn/Pb, Sn/Ag, and Sn solders, 48 th electronic components & technology conference, pp.259-267, 1998. ,
Investigation of Sn-Cu intermetallic compounds by AFM: new aspects of the role of intermetallic compounds in whisker formation, IEEE transactions on electronics packaging and manufacturing, pp.28-85, 2005. ,
DOI : 10.1109/TEPM.2005.847441
Intermetallic compounds growth between Sn-3, 5Ag lead-free solder and Cu substrate by dipping method, Journal of alloys and compounds, pp.392-192, 2005. ,
Interdiffusion at Bimetallic Electrical Interfaces, IEEE Transactions on Components, Hybrids, and Manufacturing Technology, vol.9, issue.1, pp.106-116, 1986. ,
DOI : 10.1109/TCHMT.1986.1136613
Preliminary Studies of Tin and Tin Rich Coatings as Electrical Contact Materials, IEEE Transactions on Components, Hybrids, and Manufacturing Technology, vol.4, issue.3, 1981. ,
DOI : 10.1109/TCHMT.1981.1135815
Experimental relationship between the electrical performance and the fretting regime, Proceedings of the 20th international conference on electrical contacts, pp.451-456, 2000. ,
Deteriorating mechanism of silver and tinplated copper connectors subjected to an oscillating movement, proceedings of the 36 th HOLM conference on electrical contacts, pp.395-401, 1990. ,
Thermal cycling induced wiping wear of connector contacts at 150°C, IEEE transactions on components and packaging technology, vol.22, p.1, 1999. ,
Prediction of the Coating Durability Under Oscillating Sliding Contact: Introduction of a Local Energy Density Parameter, World Tribology Congress III, Volume 1, 2005. ,
DOI : 10.1115/WTC2005-64044
Quantitative description of the electrical contact endurance under fretting condition: comparison between tin and silver coatings, Proceedings of the 24th international conference on electrical contacts, pp.272-277, 2008. ,
A fast methodology to quantify electricalcontact behaviour under fretting loading conditions, Wear, n°267, pp.1731-1740, 2009. ,
Fretting-corrosion of tin-plated contacts, Tribology international, pp.616-628, 2007. ,
Mechanical behavior of materials, 1993. ,
The Determination of Fatigue Limits under Alternating Stress Conditions, Proceedings of the Royal Society London A90, pp.411-425, 1914. ,
DOI : 10.1098/rspa.1914.0066
The automotive connector: the influence of powering and lubricating a fretting contact interface, Proceedings of the institution of mechanical engineers, p.part D, 2000. ,
DOI : 10.1243/0954407001527484
Time and level analysis of contact voltage intermittencies induced by fretting in power connector, Proceedings of the 53th Holm Conference on electrical contacts, pp.211-215, 2007. ,
Effect of temperature on the fretting corrosion of tin plated copper alloy contacts, Wear, vol.262, issue.3-4, pp.320-330, 2007. ,
DOI : 10.1016/j.wear.2006.05.020
Intermittency phenomena in electrical connectors, IEEE Transactions on Components and Packaging Technologies, vol.24, issue.3, pp.370-377, 2001. ,
DOI : 10.1109/6144.946482
Fretting corrosion of Tin-plated copper alloy, IEEE Transactions on Components, Hybrids, and Manufacturing Technology, vol.10, issue.1, pp.63-67, 1987. ,
DOI : 10.1109/TCHMT.1987.1134699
Microscopy Study of Fretting Corrosion of Tin Plated Contacts, Electrical Contacts, 2007 Proceedings of the 53rd IEEE Holm Conference on Electrical Contacts, pp.216-221, 2007. ,
DOI : 10.1109/HOLM.2007.4318220
Possible mechanism for observed dynamic resistance, IEEE transactions on components and packaging technologies, pp.408-415, 2001. ,
Electric contact behavior of Cu-Sn intermetallic coumpound formed in tin platings, Proceedings of the 44th IEEE Holm conference on electrical contacts, pp.26-33, 1998. ,
Effect of intermetallic phases on the performance of tin-plated copper connections and conductors, Proceedings of the Forty-Ninth IEEE Holm Conference on Electrical Contacts, 2003., pp.124-131, 2003. ,
DOI : 10.1109/HOLM.2003.1246487
Contact characteristics of tin-plated copper alloys in high temperature environments ,
Fretting-corrosion characteristics of electrodeposited and hot dipped tin coating contacts, Surface and coating technology, pp.3164-3174, 2008. ,
Recovery of severely degraded tin-lead plated connector contacts due to fretting corrosion, IEEE Transactions on Components and Packaging Technologies, vol.22, issue.1, pp.61-71, 1999. ,
DOI : 10.1109/6144.759354
Electro-mechanical modelling of multilayer contacts in electrical connectors, Electrical Contacts, 2007 Proceedings of the 53rd IEEE Holm Conference on Electrical Contacts, pp.1-8, 2007. ,
DOI : 10.1109/HOLM.2007.4318187
Cu-Sn Intermetallic Compound Growth in Hot-Air-Leveled Tin at and below 100°C, AMP Journal of technology, vol.3, pp.46-54, 1993. ,
The growth of intermetallic compounds on common basis materials coated with tin and tin-lead alloys, Transactions of the institute of metal finishing, pp.68-74, 1976. ,
Impact of the nickel interlayer on the electrical resistance of tin-tin interface submitted to fretting loading, Surface and coating technology 203, pp.1624-1628, 2009. ,
Microscopic study of tin intermetallic layers : influence of the performances on electrical contacts, Proceedings of the 24th international conference on electrical contacts, pp.210-215, 2008. ,
Time and Level Analysis of Contact Voltage Intermittences Induced by Fretting in Power Connector, Electrical Contacts, 2007 Proceedings of the 53rd IEEE Holm Conference on Electrical Contacts, pp.211-215, 2007. ,
DOI : 10.1109/HOLM.2007.4318219
The reliability of tin plated terminals in automotive application, technical information society pp, pp.99-101, 1990. ,
Pulvérisation cathodique magnétron, 2005. ,
Elaboration et caractérisation structurale de films minces et revêtements de Ti 2 AlN, thèse de doctorat de l'université de Poitiers, 2007. ,