R. Abdi, Charges limites d'ouvrages en sol renforcé : approches statique et cinématique, Thèse de doctorat de l, 1992.

R. Abdi, P. De-buhan, and J. Pastor, Calculation of the critical height of a homogenized reinforced soil wall: A numerical approach, International Journal for Numerical and Analytical Methods in Geomechanics, vol.41, issue.7, pp.18-485, 1994.
DOI : 10.1002/nag.1610180704

A. Anthoine, Mixed modelling or reinforced soils within the framwork of the yield design theory. Computers and Geotechnics, pp.67-82, 1989.

A. F. Ashour and C. T. Morley, The numerical determination of shear mechanisms in reinforced concrete beams. The Structural Engineer, pp.23-24, 1994.

A. F. Ashour and C. T. Morley, Effectiveness Factor of Concrete in Continuous Deep Beams, Journal of Structural Engineering, vol.122, issue.2, pp.169-178, 1996.
DOI : 10.1061/(ASCE)0733-9445(1996)122:2(169)

P. De-buhan, Critère de rupture macroscopique d'un matériau renforcé par armatures, C. R. Acad. Se. Paris, t. Série II, vol.301, issue.9, 1985.

P. De-buhan, Approche fondamentale du calcul à la rupture des ouvrages en sols renforcés, Thèse de Doctorat es Se, 1986.

P. De-buhan, Application of the yield design theory to the mechanics of reinforced soils. International Centre for Mechanical Sciences. Evaluation of global bearing capacities of structures, pp.46-90, 1993.

P. De-buhan and S. Maghous, A straightforward numerical method for evaluating the ultimate loads of structures, Eur. J. Mech, vol.14, pp.2-309, 1995.

P. De-buhan, R. Mangiavacchi, R. Nova, G. Pellegrini, and J. Salençon, Yield design of reinforced earth walls by a homogenization method, G??otechnique, vol.39, issue.2, pp.189-201, 1989.
DOI : 10.1680/geot.1989.39.2.189

P. De-buhan and J. Salençon, A comprehensive stability analysis of soil nailed structures Eur, J. Mech., A/Solids, vol.12, pp.3-325, 1993.

P. De-buhan and A. Taliercio, A homogenization approach to the yield strength of composite materials, Eur. J. Mech., A/Solids, vol.10, pp.2-129, 1991.

G. Ceradïni and C. Gavarinï, Calcólo a rottura e programmazione lineare, Giomaíe del Genio Civile, pp.1-2, 1965.

X. Chateau and L. Dormieux, Homogénéisation d'un milieu poreux non saturé, 1995.

W. F. Chen and D. Drucker, Bearing capacity of concrete blocks or rock, 1969.

W. F. Chen, Extensibility of concrete and theorems of limit analysis Jnal Eng, 1970.

W. F. Chen and . Covarrubias, Bearing capacity of concrete blocks, Jnal Eng. Mech, 1971.

W. F. Chen, Plasticity in reinforced concrete, 1982.

W. F. Chen and D. J. Han, Plasticity for structural engineers, 1988.
DOI : 10.1007/978-1-4612-3864-5

A. Ciss, Etude de la stabilité des massifs en sol renforcé par armatures métalliques à l, 1985.

-. U. Thèse-de-doctorat and . Grenoble, Dash Associates (1984-1995) XPRESS-MP reference manual

L. Davenne, Modélisation de l'influence des armatures transversales sur le comportement non linéaire d'éléments de béton armé, Thèse de l, 1991.

D. Drucker, The effect of shear on the plastic bending of beams, Journal of Applied Mechanics. Trans. ASME, vol.23, issue.78, pp.509-514, 1956.

D. Drucker, On structural concrete and the theorems of limit analysis, 1961.

P. Francescato, Prévision du comportement plastique des matériaux hétérogènes à constituants métalliques. Application aux composites à matrice métallique à fibres continues et aux plaques perforées, Thèse de l, 1994.

M. Frémond, A. Pecker, and J. Salençon, Méthodes variationnelles pour le matériau rigide plastique Symp franco-polonaisRhéologie et Mécanique des sols Le matériau de Norton-Hoff généralisé et ses applications en analyse limite, Nice. 29. Friàa A. C. R. Acad. Sei. Paris, vol.286, pp.107-110, 1974.

P. Germain, Cours de mécanique des milieux continus. Masson, Paris. 31. Green A.P. (1954) A theory of plastic yielding due to bending of cantilevers and beams. Jnal of physics of solids, Part, vol.3, issue.1, pp.1-15, 1973.

T. Guennouni and P. Le-tallec, Calcul à la rupture : régularisation de Norton-Hoff et lagrangien augmenté, J. Méc. Th. App, vol.2, pp.75-99, 1982.

B. Guessab and S. Turgeman, Generalized strength yield criterion for bar structures, Plasticity 91 Symp, pp.12-16, 1991.

P. G. Hodge, Interaction curves for shear and bending of plastic beams, Journal of applied mechanics. Trans ASME, vol.24, issue.79, pp.453-456, 1957.

M. Jennewein, Zum Bemessen des Stahlbetons mit Stabwerkmodellen, 1989.

G. N. Kani, The riddle of shear failure and its solution, ACI Proceedings, V61, n°4, avril, pp.441-454, 1964.

G. N. Kani, Basic facts concerning shear failure, ACI Jnal, V63, n°6, pp.675-691, 1966.

S. Kobayashi and E. G. Thomsen, Upper- and lower-bound solutions to axisymmetric compression and extrusion problems, International Journal of Mechanical Sciences, vol.7, issue.2, pp.127-143, 1965.
DOI : 10.1016/0020-7403(65)90071-8

F. K. Kong, P. Robins, and D. Cole, Web reinforcement effects on deep beams, ACI Journal, pp.1010-1017, 1970.

K. Kordina and F. Blume, Empirische Zusammenhänge zur Ermittlung der Schubtragfähigkeit stabförmiger Stahlbetonelemente, 1985.

K. Kordina and J. Hegger, Zur Schubtragfähigkeit von Stahlbeton-und Spannbetonbalken, Beton -und Stahlbetonbau, vol.1, pp.5-9, 1987.

M. D. Kotsovos, Behavior of reinforced concrete beams with shear span to depth ratio between 1.0 and 2.5, ACI Jnal, vol.81, issue.3, pp.279-286, 1984.

M. D. Kotsovos, Behavior of reinforced concrete beams with shear span to depth ratio greater than 2.5, ACI Jnal, vol.83, pp.1026-1034, 1986.

M. D. Kotsovos, The Concept of the Compressive-Force Path, Aci Jnal, vol.85, issue.1, pp.68-75, 1988.
DOI : 10.1007/978-3-319-00488-4_2

S. Maghous, Numerical prediction of ultimate loads: Case of von mises and tresca materials, Mechanics Research Communications, vol.20, issue.6, pp.467-474, 1993.
DOI : 10.1016/0093-6413(93)90005-9

P. Marti, 1985-a) Basic tools of reinforced concrete beam design, ACI Journal, vol.82, pp.46-56

P. Marti, 1985-b) Truss models in detailing, Concrete International, pp.66-73

J. Mazars, Application de la mécanique de l'endommagement au comportement et à la rupture du béton de structure, 1984.

J. Mazars and G. Pijaudier-cabot, Continuum Damage Theory???Application to Concrete, Jnal Eng. Mech. VI15, Feb, pp.345-365, 1989.
DOI : 10.1061/(ASCE)0733-9399(1989)115:2(345)

J. Morrow and I. M. Viest, Shear strength of reinforced concrete frame members without web reinforcement. ACI Jnal, Proc. V. 53 No 9, pp.833-849, 1957.

E. Morsch, Der Eisenbetonbau, seine Anwendung und Theorie. 3 ême édition Me Graw-Hill, 1902.

B. G. Neal, The Effect of Shear and Normal Forces on the Fully Plastic Moment of a Beam of Rectangular Cross Section, Journal of Applied Mechanics, vol.28, issue.2, pp.269-274, 1961.
DOI : 10.1115/1.3641666

M. P. Nielsen, M. W. Boestrup, B. C. Jensen, and . Bach-finn, Concrete plasticity. Danish society for structural science and engineering, 1978.

M. P. Nielsen, Limit analysis and concrete plasticity, 1984.

J. Pastor, Analyse limite : détermination numérique de solutions statiques complètes Application au talus vertical, Journal de mécanique appliquée, vol.2, pp.2-176, 1978.

J. Pastor and R. Abdi, Analyse limite et homogénisatiori. Approche numérique. 9 ème Congrès Français de Mécanique, 1989.

J. Pastor, Application de la théorie de l'analyse limite aux milieux isotropes et orthotropes de révolution Formulation numérique de l'approche statique par la méthode des éléments finis, Journal de Mécanique, vol.2, pp.674-703, 1972.

W. Ritter, Die Bauweise Hennebique Schweizerische Bauzeitung (Zürich) V33 vcl, pp.59-61, 1899.

D. Rogowsky, J. Macgregor, and S. Ong, Tests of reinforced concrete deep beams, AGI Journal, pp.614-623, 1986.

J. Salençon, Calcul à la rupture et analyse limite, 1983.

J. Salençon, Mécanique des milieux continus. Ellipses, Paris, 1988.

M. Save and . Massonet-ch, Calcul plastique des constructions, 1972.

J. Schlaich, K. Schäfer, and M. Jennewein, Toward a Consistent Design of Structural Concrete, PCI Journal, vol.32, issue.3, pp.74-150, 1987.
DOI : 10.15554/pcij.05011987.74.150

W. B. Siao, Strut-and-Tie model for shear behavior in deep beams and pike caps failing in diagonal splitting. ACI structural journal V90, pp.356-363, 1993.

W. B. Siao, Shear strength of short reinforced concrete walls, corbels and deep beams. ACI structural journal V91, pp.123-132, 1994.

W. B. Siao, Deep beams revisited. ACI structural journal V92, pp.95-102, 1995.

S. W. Sloan, Lower bound limit analysis using finite elements and linear programming, International Journal for Numerical and Analytical Methods in Geomechanics, vol.18, issue.1, pp.61-77, 1988.
DOI : 10.1002/nag.1610120105

S. W. Sloan, Upper bound limit analysis using finite elements and linear programming, International Journal for Numerical and Analytical Methods in Geomechanics, vol.24, issue.3, pp.263-282, 1989.
DOI : 10.1002/nag.1610130304

K. N. Smith and . Vantsiotis, Shear strength of deep beams, ACI Journal, vol.79, 1982.

P. Suquet, Analyse limite et homogénéisation, C. R. Acad. Sei. Paris, vol.296, pp.1355-1358, 1983.

S. Turgeman, Contribution au calcul des charges limites en milieux isotropes et orthotropes de révolution par une approche cinématique numérique, 1983.

F. Vecchio and M. Collins, The modified compression-field theory for reinforced concrete elements subjected to shear, ACI Journal, p.231, 0219.