R. B. Abdull-ahad and J. M. Abbas, Behaviour of steel fibre reinforced concrete under biaxial stresses, Fibre Reinforced Cements and Concretes -Recent Developments, Proceedings, pp.126-135, 1989.

P. Acker, Comportement mécanique du béton : apports de l'approche physicochimique, 1988.

M. Adams, Behaviour of steel fibre concrete under different loading conditions, RILEM, comm. 4, pp.527-53, 1975.

A. H. Al-shaikh, Behaviour of confined concrete columns with steel fibres, Fibre Reinforced Cement and Concrete, proceedings du 4e Symposium International de la RILEM, pp.601-612, 0992.

F. M. Alkhairi and A. E. Naaman, Compressive strength and modulus of high early strength fiber reinforced concrete, Fibre Reinforced Cement and Concrete, proceedings du 4e Symposium International de la RILEM, pp.138-152, 1992.

S. H. Alsayed, Confinement of reinforced concrete columns by rectangular ties and steel fibres, Magazine of Concrete Research, pp.265-270, 3992.
DOI : 10.1680/macr.1992.44.161.265

J. M. Alwan and A. E. Naaman, New Formulation for Elastic Modulus of Fiber???Reinforced, Quasibrittle Matrices, Journal of Engineering Mechanics, vol.120, issue.11, pp.2443-2460, 1994.
DOI : 10.1061/(ASCE)0733-9399(1994)120:11(2443)

S. A. Ashour, G. S. Hasanain, and F. F. Wafa, Shear behaviour of high strength FRC beams, ACI StructuralJournal, mars-avril, pp.2-176, 1992.

A. C1018-, Standard test method for flexura! toughness and first-crack strength of fiber reinforced concrete (using beam with third-point loading), Book of ASTM Standards, pp.89-507

F. Atassi, Etude du comportement des bétons renforcés de fibres métalliques : influence de la géométrie des fibres, du dosage et de l'anisotropie de leur répartition, 1995.

P. Bailiy, Comportement mécanique des composites ciment-fibres, l'apport des essais dynamiques, pp.295-311, 1990.

P. Bailiy and M. Khodri, Comportement macroscopique d'un élément de poutre mince en mortier armé de fibres -Expérimentation en flexion statique et dynamique, pp.407-412, 1991.

J. Baron and R. Lesage, Pour une étude pratique de la maniabilité: le maniabilimètre Lesage du Laboratoire Central des Ponts et Chaussées, 1965.

P. Barios, Review paper: bond in fibre reinforced cements and concretes, Internationaljournal of Cement Composite and Lightweight Concrete, pp.3-4, 1981.

P. Barros, Performance parameters of fibre reinforced cement based composites, High Performance Fiber Reinforced Cement Composites, RILEM/ACI Workshop, Proceedings, pp.431-443, 1991.

G. Batson, C. Ball, and L. Bailey, Flexura! fatigue strength of steel fiber reinforced concrete beams, pp.673-677, 1972.

G. Batson, E. Jenkins, and R. Spatney, Steel fibers as shear reinforcement in beams, ACI Journal, oct, vol.69, pp.640-644, 1972.

E. H. Benaija, Application de la stéréophotogrammétrie au béton : cas de la compression simple, 1992.

G. Bernier, Caractérisation et contrôle des bétons renforcés de fibres, Annales de l'ITBTP, n°494, série Béton 280, pp.105-117, 1991.

G. Bernier and V. Lecuir, Structuration des BRF et réponse mécanique, Les Bétons Renforcés de Fibres Métalliques, Colloque Francophone, pp.57-67, 1994.

P. Berthelot, F. Buyle-bodin, X. Destrée, S. Lamotte, C. Paciorek et al., Pieux solfibres en béton renforcé de fibres métalliques -Aptitude à l'emploi en zones sismiques, pp.4-23, 1994.

!. J. Bonze and M. Schmidt, Distribution and orientation of steel fibres in concrete and their influence on the characteristics of steel fibre concrete, FRC-86, Development in Fiber Reinforced Cement and Concrete, RJLEM Symposium, 1986.

C. Boulay and A. Colson, Un extensom??tre ?? b??ton ??liminant l'influence des d??formations transversales sur la mesure des d??formations longitudinales, Mat??riaux et Constructions, vol.14, issue.1, pp.378-383, 1981.
DOI : 10.1007/BF02478720

C. Boulay, Conception et préparation d'un essai sur l'étude du couplage entre ténacité et teneur en eau du béton, 1988.

A. M. Brandt, On the optimal direction of short metal fibres in brittle matrix composites, Journal of Materials Science, vol.8, issue.11, pp.10-3610, 1985.
DOI : 10.1007/BF00552371

A. Burakiewicz, Testing of fibre bond strength in cement matrix, Proceedings, RJLEM Symposium: Testing and Test Methods of fibre Cement Composites, pp.355-365, 1978.

J. A. Calgaro and M. Virlogeux, Projet et construction des ponts -Analyse structurale des tabliers de ponts, 2e édition, 1994.

P. Casanova, Etude du comportement d'un élément de structure en béton armé renforcé par du béton de fibres métalliques projeté, 1992.

P. Casanova, P. Rossi, L. Maou, and F. , Calcul en flexion et caractérisation des bétons de fibres métalliques, Annales de l'ITBTP, n°528, série 350, pp.80-91, 1994.

P. Casanova, L. Maou, F. Renwez, S. Rossi, and P. , Calcul du béton de fibres métalliques : cas de la flexion simple, pp.73-85, 1994.

P. Casanova and P. Rossi, Analysis of metallic fibre-reinforced concrete beams submitted to bending, Materials and Structures, vol.14, issue.no 3, 1995.
DOI : 10.1007/BF02486343

P. Casanova, P. Rossi, and I. Schauer, Les fibres d'acier peuvent-elles remplacer les armatures transversales dans les poutres en béton armé ?, pp.49-60, 1995.

G. Chanvillard, Analyse expérimentale et modélisation micromécanique du comportement des fibres d'acier tréfilées, ancrées dans une matrice cimentaire, Etudes et Recherches des laboratoires des Ponts et Chaussées, 1993.

G. Chanvillard, P. C. Aïtcin, C. Lupien, and M. T. Do, Les resurfaçages minces adhérents en béton renforcé de fibres métalliques, Les Bétons Renforcés de Fibres Métalliques, pp.93-104, 1994.

G. Chanvillard, Modelling of wiredrawn steel fibres debonding, Proceedings, Varsovie (Pologne), septembre, pp.311-319, 1994.

M. P. Collins, Towards a rational theory for RC members in shear, Journal of the Structural Division ASCE, vol.104, pp.649-666, 1978.

R. Craig, Flexural behaviour and design of reinforced fiber concrete members, FRC Prop, and App., SP 105, ACI Detroit, pp.517-563, 1987.

L. Davenne, Modélisation de l'influence des armatures transversales sur le comportement non linéaire d'éléments de béton armé, Thèse de doctorat, 1990.

F. De-larrard and D. Fan, BETONLAB -Logiciel d'aide à la formulation des bétons, 1992.

F. De-larrard, C. Hu, and T. Sedran, Best packing and specified rheology: two key concepts in high-performance concrete mixture-proportioning, 2nd CANMET/ACI International Symposium on Advances in Concrete Technology, 1995.

D. Toro-rivera and R. , Comportement des noeuds d'ossature en béton armé sous sollicitations alternées, 1988.

J. Desrues, Sur l'application de la stéréophotogrammétrie à la mesure des grandes déformations, Revue Française de Mécanique, n°3, pp.55-63, 1983.

J. Desrues, Localisation de la déformation dans les matériaux granulaires, thèse d'état, 1984.

J. Desrues, Adaptation d'une méthode stéréophotogrammétrique développée à l'IMG, 1987.

X. Destrée, Twincone SFRC structural concrete, FRC-95, Modem developments, mars, pp.26-29, 1995.

B. Djebri and J. Torrenti, Comportement des bétons de fibres sous sollicitations biaxiales, Annales de l'ITBTP, n°503, série béton 289, mai, pp.106-112, 1992.

H. V. Dwarakanath and T. S. Nagaraj, Comparative study of predictions of fíexural strength of steel fiber concrete, ACI StructuralJournal, vol.88, pp.714-720, 1991.

E. Hachem and M. , Etude de l'influence de la fibre de fonte sur le retrait et le fluage du béton, 1990.

E. Niema and E. I. , Reinforced concrete beams with steel fibers under shear, ACI Structura! Journal, vol.88, issue.2, pp.178-183, 1991.

A. Elouard, Module Probabiliste -Notice d'utilisation, Î994)

B. Fou-ré, Comportement à l'effort tranchant des poutres en béton de fibres, note interne CEBTP, 1995.

A. Francis, R. N. Swamy, and R. L. Wagstaffe, Modélisation numérique du comportement du béton en traction - Approche probabiliste, Mémoire d'ingénieur du CUST (sous la direction de P. Rossi), Developments in fibre reinforced cement and concrete, RILEM Symposium, 1984.

P. G. Gambarova and C. Schumm, Impulsive punching of fiber-reinforced concrete slabs, pp.252-257, 1994.

M. Glavind and H. Stang, Review of application of fiber concrete and fiber cement in Denmark, Brittle Matrix Composites, vol.4, pp.51-62, 1994.

J. L. Granju, Le béton renforcé de fibres comme nouveau matériau de réparation, Rapport, 1991.

J. Granju and F. Grandhaie, Thin repairs with metallic glass fibre reinforced concrete: length changes during the first 24 hours, Fibre Reinforced Cement and Concrete, proceedings du 4e Symposium International de la RILEM, pp.676-689, 1992.

I. Guénot, Les origines physiques du fluage propre du béton : étude expérimentale et modélisation de pâtes de ciment, 1995.

M. Grzybowski and C. Meyer, Damage accumulation in concrete with and without fiber reinforcement, ACI Materials Journal, vol.90, pp.594-604, 1993.

P. Hamelin, Composites fibres ciments, Mécanique des géomatériaux, Hermès, pp.240-272, 1995.

D. Hannant, Fibre cements and fibre concrete, 1978.

D. J. Hannant and J. Edgington, Durability of steel fibre concrete, RILEM Symposium on Fibre Reinforced Cement and Concrete, septembre, pp.159-169, 1975.

T. Hara, M. Shoya, and K. Kikuchi, Assessment of steel fibre concrete exposed for 14 years, Fibre Reinforced Cement and Concrete, proceedings du 4e Symposium International de la RILEM, pp.872-882, 1992.

N. Harrouche, Formulation et comportement à la fissuration des bétons de fibres métalliques, 1989.

D. A. Hordijk, H. W. Reinhardt, and H. A. Cornelissen, Fracture mechanics parameters of concrete from uniaxial tensile test as influenced by specimen length, Proceedings of the International Conference on the Fracture of Concrete and Rocks, pp.138-149, 1987.

C. Hu, Etude du comportement rhéologique des bétons frais, Thèse de doctorat de l'Ecole Nationale des Ponts et Chaussées, 1995.

P. Humbert, Un code général de calculs par éléments finis, pp.112-116, 1989.

J. Hurtado, Développements récents des pieux à la tarière creuse, Annales de l'ITBTP, série sols et fondations 203, pp.82-101, 1989.

L. G. Jaeger, B. Bakht, and A. A. Mufti, Economical deck slabs for slab-on-girder bridges, FRC-95, Modern developments, mars, pp.26-29, 1995.

R. Jindal and V. Sharma, Behavior of steel fiber reinforced concrete knee-type beamcolumn connections, Fiber Reinforced Concrete Properties and Applications, ACI SP-105, 1987.

C. Johnston and R. W. Zemp, Flexura! fatigue performance of steel fiber reinforced concrete -Influence of fiber content, aspect ratio and type, ACI Materials Journal, vol.88, issue.4, pp.374-383, 1991.

M. M. Kamal, H. H. Bahnasaway, and F. E. Ei-refai, Behaviour of fibre reinforced concrete beams exposed to fire, Fibre Reinforced Cement and Concrete, proceedings du 4e Symposium International de la RILEM, pp.764-774, 1992.

G. N. Kani, The riddle of shear failure and its solution, AC I Proceedings, pp.441-454, 1964.

G. N. Kani, Basic facts concerning shear failure, Adjournal, vol.63, issue.6, pp.675-691, 1966.

A. Katz and A. Bentur, High performance fibres in high strength cementitious matrices, High Performance Fiber Reinforced Cement Composites, RILEM/ACI Workshop, Proceedings, Mainz, pp.237-247, 1991.

B. Katzensteiner, S. Mindess, A. Filiatrault, N. D. Nathan, N. Banthia et al., Use of steel fibre concrete in seismic design, Fibre Reinforced Cement and Concrete, 4e Symposium International, pp.613-628, 1992.

A. Kelly and C. Sweben, Poisson contraction in aligned fibre composites showing pullout, Journal of Material Science Letter, vol.11, issue.3, pp.583-586, 1976.

V. K. Kodur and T. T. Lie, Fire resistance of hollow steel columns filled with steel fiber reinforced concrete, FRC-95, Modern developments, mars, pp.26-29, 1995.

K. Kordina and J. Hegger, Zur Schubtragfähigkeit von Stahlbeton-und Spannbetonbalken, Beton-und Stahlbetonbau, vol.1, pp.5-9, 1987.
DOI : 10.1002/best.198700020

K. Kosa, A. E. Naaman, and W. Hansen, Durability of fiber reinforced mortar, ACI Materials Journal, vol.88, issue.3, pp.310-319, 1991.

M. D. Kotsovos, Mechanisms of'shear' failure, Magazine of Concrete Research, pp.123-99, 1983.

K. Kovler, J. Sikuler, and A. Bentur, Restrained shrinkage tests of fibre-reinforced concrete ring specimens: effect of core thermal expansion, Materials and Structures, vol.26, issue.4, pp.231-237, 1993.
DOI : 10.1007/BF02472616

K. Kwak, J. Suh, and C. T. Hsu, Shear fatigue behaviour of steel fiber reinforced concrete beams, ACI Structural Journal, vol.88, issue.2, pp.155-160, 1991.

L. Borderie and C. , Phénomènes unilatéraux dans un matériau endommageable: modélisation et application à l'analyse de structures en béton, 1991.

M. Lakshmipathy and A. R. Santhakumar, Experimental verification of the behaviour of reinforced fibrous concret frames subjected to seismic type of loading, FRC-86, Development in Fiber Reinforced Cement and Concrete, RILEM Symposium, vol.2, 1986.

E. S. Larsen, Freeze-thaw resistance of FRC materials, Fibre Reinforced Cernent and Concrete, proceedings du 4e Symposium International de la WLEM, pp.838-850, 1992.

P. Lawrence, Some theoretical considerations of fibre pull-out from an elastic matrix, Journal of Materials Science, vol.3, issue.1, pp.1-7, 1972.
DOI : 10.1007/BF00549541

L. Maou and F. , Projet de mode opératoire de l'essai de traction uniaxiale, 1994.

L. Roy and R. , Béton armé de fibres métalliques -Etude à la fatigue olygocycîique, 1986.

F. Leonhardt and R. Walther, Schubversuche an einfeldrigen Stahlbeton-balken, 1962.

F. Leonhardt, Effort tranchant et torsion en béton précontraint, Annales de Î'ITBTP, supplément au n° 280, avril, série Béton précontraint n°73, pp.1-27, 1971.

T. Y. Lim, P. Paramasivam, and S. L. Lee, An analytical model for tensile behaviour of steel fiber concrete, ACIMaterials Journal, vol.84, issue.4, pp.286-298, 1987.

T. Y. Lim, P. Paramasivam, and S. L. Lee, Shear and moment capacity of reinforced steel-fibre-concrete beams, Magazine of Concrete Research, pp.140-148, 1987.
DOI : 10.1680/macr.1987.39.140.148

B. Maidl and J. Dietrich, Verification of Serviceability for Steel Fibre Reinforced Concrete in Tunnelling, Structural Engineering International, vol.2, issue.2, pp.114-117, 1992.
DOI : 10.2749/101686692780615941

P. S. Mangat and K. Gurusamy, Permissible crack widths in steel fibre reinforced marine concrete, Materials and Structures, vol.17, issue.5, pp.338-347, 1987.
DOI : 10.1007/BF02472580

M. A. Mansur, K. C. Ong, and P. Paramasivam, Shear Strength of Fibrous Concrete Beams Without Stirrups, Journal of Structural Engineering, vol.112, issue.9, pp.2066-2079, 1986.
DOI : 10.1061/(ASCE)0733-9445(1986)112:9(2066)

G. Mcgregor, Steel fibre reinforced concrete in Australia, FRC-95, Modern developments, mars, pp.26-29, 1995.

S. Mindess, N. Banthia, and A. Bentur, The response of reinforced concrete beams with a fibrous concrete matrix to impact loading, International Journal of Cement Composites and Lightweight Concrete, pp.8-165, 1986.

S. Mindess and C. Yan, Perforation of plain and fibre reinforced concretes subjected to low-velocity impact loading, I993), pp.83-92
DOI : 10.1016/0008-8846(93)90138-Y

S. Mindess, L. Chen, and D. R. Morgan, Determination of the first-crack strength and flexura! toughness of steel fiber-reinforced concrete, Advanced Cement Based Materials, pp.201-208, 1994.

D. R. Morgan and D. N. Mowat, A comparative evaluation of plain, mesh and steel fiber reinforced shotcrete. Fiber Reinforced Concrete, ACI SP-81, pp.307-324, 1984.

F. Pech and B. Schacher, Fibre reinforced concrete containers: from concept to manufacturing, Fibre Reinforced Cement and Concrete, proceedings du 4e Symposium International de la RILEM, pp.713-722, 1992.

V. Ramakrishnan, G. Oberling, and P. Tatnall, Flexura! fatigue strength of steel fiber reinforced concrete, Fiber Reinforced Concrete Properties and Applications, ACI SP-105, pp.225-246, 1987.

H. W. Reinhardt, H. A. Körnieling, and A. J. Zielinski, The split Hopkinson bar, a versatile tool for the impact testing of concrete, Matériaux et Constructions, pp.109-55, 1986.
DOI : 10.1007/BF02472311

S. Richer, Résolution des problèmes de contact entre solides élastiques par la méthode des éléments finis, 1985.

W. Ritter, Die Bauweise Hennebique, Schweizerische Bauzeitung, pp.59-61, 1899.

J. Robinson and J. Demorieux, Essais de traction-compression sur des modèles d'âmes de poutres en béton armé, 1968.

J. R. Robinson and J. Demorieux, Essais de poutres en double T en béton armé, Annales de l'ITBTP, pp.67-91, 1976.

J. P. Romualdi and G. B. Batson, Mechanics of crack arrest in concrete, Journal of Engineering Mechanics Division, vol.89, pp.147-168, 1963.

J. P. Romualdi and J. A. Mandel, Tensile strength of concrete affected by uniformly distributed closely spaced short lengths of wire reinforcement, pp.657-671, 1964.

P. Rossi, P. Acker, and Y. Malier, Effect of steel fibres at two different stages: The material and the structure, Materials and Structures, vol.16, issue.6, pp.436-439, 1987.
DOI : 10.1007/BF02472494

P. Rossi and S. Richer, Numerical modelling of concrete cracking based on a stochastic approach, Materials and Structures, vol.20, issue.5, pp.334-337, 1987.
DOI : 10.1007/BF02472579

P. Rossi, N. Harrouche, and A. Belloc, Méthode de composition des bétons de fibres métalliques, Annales de l'ITBTP, n°475, série béton 266, pp.38-43, 1989.

P. Rossi, Formulation et comportement mécanique des bétons de fibres métalliques^ Annales de l'ITBTP, n°492, série béton 279, mars-avril, pp.90-107, 1991.

P. Rossi and X. Wu, Probabilistic model for material behaviour analysis and appraisement of concrete structures, Magazine of Concrete Research, pp.161-271, 1992.

P. Rossi, Comportement mécanique des bétons de fibres métalliques sous chargements monotones: rôle des fibres à différentes échelles, Les Bétons Renforcés de Fibres Métalliques, pp.149-154, 1994.

P. Rossi, J. G. Van-mier, F. Toutlemonde, L. Maou, F. Boulay et al., Effect of loading rate on the strength of concrete subjected to uniaxial tension, Materials and Structures, vol.14, issue.79, pp.27-260, 1994.
DOI : 10.1007/BF02473042

P. Rossi and X. Wu, Comportement en compression du béton -Mécanismes physiques et modélisation, pp.89-94, 1994.

P. Rossi, S. Renwez, and A. Belloc, Les bétons fibres à ultra-hautes performances, Bulletin de Liaison des LPC, vol.196, pp.61-66, 1995.

P. Rossi, P. Casanova, and S. Renwez, Les bétons de fibres à hautes performances: des matériaux d'avenir ?, Bulletin de Liaison des LPC, vol.197, pp.19-23, 1995.

K. Sakai, T. Ochi, and M. Kitoh, Applications of steel fiber reinforced concrete in Japan, FRC-95, Modern developments, pp.53-62, 1995.

M. Sakai and N. Nakamura, Analysis of flexural behaviour of steel fibre reinforced concrete, FRC 86, Rilem symposium, 1986.

L. Sarvaranta and E. Mikkola, Fibre mortar composites under fire conditions: effects of ageing and moisture content of specimens, Materials and Structures, vol.17, issue.9, pp.532-538, 1994.
DOI : 10.1007/BF02473214

D. Schneider, P. Casanova, and P. Rossi, Application du calcul à la rupture à une dalle carrée en béton de fibres métalliques sollicitée en flexion, Annales de l'ITBTP, n°528, pp.62-79, 1994.

A. Seliier and A. Mebarki, Evaluation de la probabilité d'occurence d'un événement rare par l'utilisation d'un tirage d'importance conditionné, Annales des Ponts et Chaussées, pp.3-23, 1993.

P. Serna-ros, Etude de la contribution des fibres métalliques à l'amélioration du comportement du béton au cisaillement, 1984.

A. K. Sharma, Shear strength of steel fiber reinforced concrete beams, ACI Journal, pp.624-628, 1986.

V. Sood and S. Gupta, Behavior of steel fibrous concrete beam-column connections, Fiber Reinforced Concrete Properties and Applications, ACI SP-105, Î987), pp.437-474

P. Soroushian and Z. Bayasi, Prediction of the tensile strength of fiber reinforced concrete: a critique of the composite material concept, Fiber Reinforced Concrete, Properties and applications, ACI, SP-105, pp.71-84, 1987.

P. Soroushian and C. Lee, Distribution and orientation of fibers in steel fiber reinforced concrete, ACI Materials Journal, vol.87, issue.5, pp.433-439, 1990.

P. Soroushian and C. Lee, Tensile strength of steel fiber reinforced concrete: correlation with some measures of fiber spacing, ACI Materials Journal, vol.87, pp.541-546, 1990.

H. Stang, Evaluation of properties of cementitious fiber composite materials, High Performance Fiber Reinforced Cement Composites, RJLEM/ACI Workshop, pp.388-406, 1991.

R. N. Swamy and P. S. Mangat, Influence of fiber geometry on the properties of steel fiber reinforced concrete, Cement and Concrete Research, vol.4, issue.3, pp.451-465, 1974.
DOI : 10.1016/0008-8846(74)90110-0

R. N. Swamy, Fiber reinforcement of cement and concrete, Matériaux et Constructions, pp.235-254, 1975.

R. N. Swamy and H. Stravidcs, influence of fiber reinforcement on restrained shrinkage and cracking, ACI Journal, vol.73, pp.443-460, 1979.

R. N. Swamy and H. M. Bahia, The effectiveness of steel fibres as shear reinforcement, Concrete International, mars, pp.35-40, 1985.

R. N. Swamy, R. Jones, and T. Chiam, Shear transfer in steel fiber reinforced concrete, Fiber Reinforced Concrete Properties and Applications, SP 105-29, pp.565-592, 1987.

R. N. Swamy, R. Jones, and A. T. Chiam, Influence of steel fibres on the shear resistance of lightweight concrete I-beams, ACI Structural Journal, vol.90, pp.103-114, 1993.

K. H. Tan and M. A. Mansur, Shear Transfer in Reinforced Fiber Concrete, Journal of Materials in Civil Engineering, vol.2, issue.4, pp.202-214, 1990.
DOI : 10.1061/(ASCE)0899-1561(1990)2:4(202)

K. H. Tan, K. Murugappan, and P. Paramasivam, Shear behavior of steel fiber reinforced concrete beams, ACI Structural Journal, pp.3-11, 1993.

J. Tang, C. Hu, Y. K. Yan, and Y. , Seismic behaviour and shear strength of framed joint using steel-fiber reinforced concrete, Journal of Structural Engineering, vol.118, pp.341-358, 1992.

A. Tomaszewicz, Fiber reinforced mortar and concrete -Sub project 2.1, phase - Shear tests on concrete beams reinforced with steel fibers, FCB, 1988.

J. M. Torrenti, J. Desrues, E. H. Benaija, and C. Boulay, Stereophotogrammetric visualisation of strain localisation in concrete under compression, Journal of Engineering Mechanics, vol.177, p.7, 1991.

F. Ulm, Modélisation élastoplastique avec endommagement du béton de structures, Thèse de doctorat de l'Ecole Nationale des Ponts et Chaussées, 1994.

T. Valade, Comportements de bétons armés de fibres métalliques, 1987.

M. Valle and O. Büyüköztürk, Behavior of fiber reinforced high-strength concrete under direct shear, ACIMaterials Journal, vol.90, issue.2, pp.122-133, 1993.

J. G. Van-mier, M. B. Nooru-mofaamed, and G. Timmers, An experimental study of shear fracture and aggregate interlock in cement based composites, p.4, 1991.

M. Vandewalle, Tunneling the world, Bekaert S.A, vol.229, 1990.

F. J. Vecchio and M. P. Collins, Predicting the response of reinforced concrete beams subjected to shear using modified compression field theory, ACI Structural Journal, vol.85, pp.3-258, 1988.

A. Vervuurt and J. G. Van-mier, Fundamental fracture mechanisms in concrete and sandstone: effect of specimen boundary rotations, Brittle Matrix Composites, vol.4, pp.97-106, 1994.

M. Vincent, Développement de bétons renforcés de fibres pour des fondations profondes, 1990.

S. Wallis, Heathrow baggage-handling tunnel, World tunneling, oct, pp.319-323, 1994.

J. Walraven, P. T. Markov, and I. , The punching shear resistance of fibre reinforced concrete slabs, FRC-86, development in fiber reinforced cement and concrete, PJLEM Symposium, 1986.

R. Walther and M. Miehlbrat, Dimensionnement des structures en béton, traité de Génie Civil de î'Ecoie polytechnique fédérale de Lausanne, 1990.

A. Winer and V. M. Malhotra, Reinforcement of concrete by asbestos fibres, RILEM Symposium on Fibre Reinforced Cement and Concrete, pp.577-581, 1975.

P. J. Wright, The effect of the method of test on the flexural strength of concrete, Magazine of Concrete Research, pp.67-76, 1975.
DOI : 10.1680/macr.1952.4.11.67

G. Wu and M. Jones, Navy experience with steel fiber reinforced concrete airfield pavement, Fiber Reinforced Concrete Properties and Applications, ACI SP-105, pp.403-418, 1987.

X. Wu, Modélisation numérique de la fissuration du béton à partir d'une approche probabiliste, 1991.

W. S. Yin, E. C. Su, and M. A. Mansur, Biaxial tests of plain and fiber concrete, ACI Materials Journal, vol.86, issue.3, pp.mai-juin, 1989.

. Cependant, on constate que les cadres dimensionnés sont équivalents à une contrainte caractéristique de 0,4 x 435 = 1.74 MPa Utiliser le béton BE100CHP conduit donc à ajouter un coefficient de sécurité de 1,15 comme dans le cas de l'acier. Cependant, ce coefficient supplémentaire n'est pas justifié, puisque la caractérisation du béton est effectuée in situ

. Soit-un-prix-au-m, F/kg en place) : 2,9.10' 2 m 3 x 7800 kg

. Si and . De-volume, le prix des fibres peut descendre à 5 F/kg, le surcoût est alors de 10 %. Ce chiffre est à comparer aax gains de productivité liés à l'automatisation