Archard Contact and rubbing of flat surfaces, J.Appl.Pliys, vol.24, pp.981-988, 1953. ,
Determination of the limit response in cyclic plasticity, Proceedings of the 2nd International Conference on Computational plasticity: Models, Software and Applications, pp.639-650, 1989. ,
Effect of Roughness and Sliding Friction on Contact Stresses, Journal of Tribology, vol.113, issue.4, pp.729-738, 1991. ,
DOI : 10.1115/1.2920686
An Elastic-Plastic Finite Element Model of Rolling Contact, Part 1: Analysis of Single Contacts, Journal of Applied Mechanics, vol.52, issue.1, pp.67-73, 1985. ,
DOI : 10.1115/1.3169028
An Elastic-Plastic Finite Element Model of Rolling Contact, Part 2: Analysis of Repeated Contacts, Journal of Applied Mechanics, vol.52, issue.1, pp.75-82, 1985. ,
DOI : 10.1115/1.3169030
Usure induite en petits débattements: transformation tnbologique d'alliages de titane, thèse de Doctorat, 1991. ,
A large time increment method for elastoplastic problems, Eur.J.Mech, issue.4, pp.257-275, 1989. ,
Dang Van Contribution à l'étude théorique du contact élastique d'un frotteur cylindrique glissant sur un massif élastique Industrie minérale, A r ° spécial Rhéologie, 1976. ,
Constitutive equations for cyclic plasticty and cyclic vis colplasti city, Int.J of Plasticity, pp.245-302, 1989. ,
Problèmes quasistatiques en viscoplasticité, 1978. ,
A large time increment approach for cyclic viscoplasticity, International Journal of Plasticity, vol.9, issue.2, pp.141-157, 1993. ,
DOI : 10.1016/0749-6419(93)90026-M
The large time increment method applied to cyclic loadings , IUTAM Symposium Creep of structures, pp.555-562, 1990. ,
Traitements superficiels et tenue en service des assemblages démontables: base d'une méthodolgie de choix, Thèse Centrale Lyon, 1993. ,
Therrnomecha.nical state near rolling contact area, Dissipative Processes in tribology, Elsievier Science B.V, pp.423-428, 1994. ,
Elastoplastic Calculations of the Mechanical State in Alternative Moving Contacts: Application to Fretting Fatigue, FRETTING FATIGUE, ESIS, vol.18, pp.161-168, 1994. ,
Síeady-state floto in classical elastoplasticity : application to repeated rolling and sliding contact, J.Mech.Phys,Solids, vol.41, issue.11, pp.1691-1710, 1993. ,
Elatoplastic analysis of repeated moving contact to railways damage phenomena, Wear, vol.196, pp.77-81, 1996. ,
On a new multiaxial fatigue limit criterion: theory and application, biaxial and multiaxial fatigue, pp.479-496, 1982. ,
Macro-micro approach in high-cycle multiaxial fatigue, Advances in multiaxial fatigue, ASTM STP 1991, American Society for testing and Materials, Philadelphia, pp.120-130, 1993. ,
Sur le calcul de limites d'endurance des aciers, thèse École polytechnique, 1991. ,
Elastoplastic indentation of a half-space by an infinitely long rigid circular cylinder, International Journal of Mechanical Sciences, vol.13, issue.6, pp.519-530, 1971. ,
DOI : 10.1016/0020-7403(71)90039-7
Mode II S IF for a crack parallel to the surface of an elastic half-space, J. Mech. Phys. Solids, vol.33, pp.1-81, 1985. ,
Mechanics of fretting fatigue, Wear, vol.175, issue.1-2, pp.107-113, 1994. ,
DOI : 10.1016/0043-1648(94)90173-2
On the mechanics of fretting fatigue, Wear, vol.125, issue.1-2, pp.129-146, 1988. ,
DOI : 10.1016/0043-1648(88)90198-6
Crack initiation criteria in fretting fatigue, Wear, vol.136, pp.329-343, 1990. ,
On the determination of stress intensification factors for a wearing half-space, Engineering Fracture Mechanics, vol.13, issue.1, pp.69-78, 1980. ,
DOI : 10.1016/0013-7944(80)90041-7
Mechanics of elastic contacts, 1988. ,
Quick analysis of inelastic structures using a simplified m,ethod, Nuclear Engineering and design, vol.16, pp.281-291, 1989. ,
Numerical Simulation of Contact Pressure Evolution in Fretting, Journal of Tribology, vol.116, issue.2, pp.247-254, 1994. ,
DOI : 10.1115/1.2927205
Contact mechanics, 1985. ,
Contact mechanics and the wear of metals, Wear, vol.190, issue.2, pp.162-170, 1995. ,
DOI : 10.1016/0043-1648(95)06665-9
Shakedown of 2-dimensional asperities in sliding contact, International Journal of Mechanical Sciences, vol.34, issue.5, pp.375-394, 1992. ,
DOI : 10.1016/0020-7403(92)90025-C
The application of shakedown principles in rolling and sliding contact, Eur. J. Mech., A/solids, vol.11, pp.155-172, 1992. ,
Plastic flow, residual stress and shakedown in rolling contact, proceeding of Second International Symposium on contact Mechanics and wear of Rail/wheel systems 1986, university of Rhode Island, 1986. ,
La méthode à grand increment pour l'analyse de structures à comportement non linéaire décrit par variables internes, C.R.A.S Série II, vol.309, issue.11, pp.1095-1099, 1989. ,
Convex sets and their applications, 1982. ,
A Correlation Between Low Cycle Fatigue Properties and Scuffing Properties of 4340 Steel, Journal of Tribology, vol.117, issue.4, pp.617-621, 1995. ,
DOI : 10.1115/1.2831525
A new general theorem on shakedown of elasto-plastic structures, 1956. ,
The steady state sliding of rough surfaces, Wear, pp.81-92, 1994. ,
Elastic Finite Element Analysis of Multi-Asperity Contacts, Journal of Tribology, vol.114, issue.4, pp.823-831, 1992. ,
DOI : 10.1115/1.2920955
Nix Fretting fatigue in the power industry: Experiments, analysis and Integrety Assesment, Standardization of fretting fatigue test methods and equipment , ASTM STP 1159, pp.153-169, 1992. ,
On a new method of évaluation of the inelastic state due to moving contacts, W T ear, pp.203-204, 1997. ,
Formulation et résolution numérique des problèmes thermoviscoplastiques, Thèse ENPC, 1989. ,
Compliance of Elastic Bodies in Contact, J.Appl.Mech, vol.16, pp.259-268, 1949. ,
DOI : 10.1007/978-1-4613-8865-4_24
Modélisation des phénomènes de l'usure -ébauche d'un modèle quantitatif, Thèse Ecole Ploytechnique, 1996. ,
Elastoplastic contact of bodies with friction under normal and langentiel Loading, pp.519-526, 1984. ,
Fundamental investigations of fretting fatigue, Bulletin of JSME, vol.12, issue.50, 1968. ,
Hertzian contact of ground surfaces, J.Tïibol, pp.175-179, 1988. ,
Mechanics of fretting fatigue tests, International Journal of Mechanical Sciences, vol.29, issue.5, pp.355-365, 1987. ,
DOI : 10.1016/0020-7403(87)90117-2
Simulation de l'opération de diidgeonnage Méthode de plasticité stationnaire, 1991. ,
Theory of the Fatigue of Metals, Proceedings of the royal academy, A 171, 1939. ,
DOI : 10.1098/rspa.1939.0055
Fatigue poly cyclique des métaux -une nouvelle approche, Thèse E.N.P.C, 1987. ,
Développement d'une méthodologie prévisionnelle du comportement en fretting fatigue couplant les approches expérimentales et théoriques, Thèse Centrale Lyon, 1994. ,
An analysis of fretting-fatigue failure combined with numerical calculations to predict crack nucleaiion, pp.181-183, 1995. ,
4 general shakedown for elasto-plastic bodies with work hardening, 3rd Int. Conf. on Structural Mechanics in Reactor tech., Loudon, 1976. ,
Application of the kinematical shakedown theorem to rolling and sliding point contacts, Journal of the Mechanics and Physics of Solids, vol.33, issue.4, pp.339-362, 1985. ,
DOI : 10.1016/0022-5096(85)90033-X
A critical review of fretting fatigue investigations at the royal aerospace establishment, Standardisation of fretting fatigue test methods and équipement, ASTM STP 1159, American society for testing and materials, pp.129-152, 1993. ,
A fracture mechanics approach to wear, pp.125-132, 1980. ,
An investigation of fatigue and fretting in a dovetail joint, Experimental Mechanics, vol.24, issue.3, pp.208-217, 1984. ,
DOI : 10.1007/BF02323167
Crack propagation behaviour in fretting-fatigue, Wear No. 107, pp.245-262, 1986. ,
Damage formation during fretting fatigue, Wear, vol.125, issue.1-2, pp.163-174, 1988. ,
DOI : 10.1016/0043-1648(88)90200-1
A generalized standard model for contact , friction and wear, Contact Mechanics, 1995. ,
An averview of the delamination theory of wear, pp.1-16, 1977. ,
Testing methods in fretting fatigue: a critical appraisal, standardisation of fretting fatigue test methods and équipement ,
On fretting maps, Wear, vol.126, issue.2, pp.131-147, 1988. ,
DOI : 10.1016/0043-1648(88)90134-2
Fissuration induite en petits débattement: application au cas d'alliages d'Aluminium aéronautiques, Thèse de Doctorat, 1992. ,
A thermodynamical model of contact, friction and wear: I governing equations, Wear, vol.114, issue.2, pp.135-168, 1987. ,
DOI : 10.1016/0043-1648(87)90086-X
On a simplified inelastic analysis of structures Nuclear Engineering and design, Liste des figures 1.1 Schéma du montage expérimental du fretting, pp.333-368, 1980. ,