. La-taille-du-réservoir-conditionne-le-nombre-de, passes" nécessaires pour la fabrication du massif. Les travaux de Rad et Tumay (1987) montrent que le niveau de sable dans le réservoir n'influe pas sur l

A. , F. Pyrah, I. C. Fryer, and S. J. , A Clay Calibration Chamber for Testing Field Devices, Geotechnical Testing Journal, vol.14, issue.4, pp.440-450, 1991.

B. , F. Jezequel, and J. F. , Le pressiomètre autoforeur, pp.9-30, 1973.

B. , F. Jezequel, J. F. Shield, and D. H. , The Pressuremeter and Foundation Engineering, Series on Rock and Soil Mechanics, 1978.

B. , G. Nova, and R. , Membrane Penetration Effects in Triaxial Testing, ASCE Journal of Geotechnical Engineering, vol.110, issue.3, pp.403-420, 1984.

K. Been, J. H. Crooks, D. A. Becker, and M. G. Jefferies, The cone penetration test in sands: part I, state parameter interpretation, G??otechnique, vol.36, issue.2, 1986.
DOI : 10.1680/geot.1986.36.2.239

K. Been and M. G. Jefferies, A state parameter for sands, G??otechnique, vol.35, issue.2, pp.99-112, 1985.
DOI : 10.1680/geot.1985.35.2.99

K. Been, J. , M. G. Hachey, and J. , The critical state of sands, G??otechnique, vol.41, issue.3, 1991.
DOI : 10.1680/geot.1991.41.3.365

B. , R. Bizzi, G. Ghjonna, and V. N. , Design, Construction and Use of a Calibration Chamber, Proc. of the 2d European Symp. on Penetration Testing, ESOPT, pp.439-446, 1982.

B. , R. Ghionna, V. N. Jamiolkowski, M. Robertson, P. K. Peterson et al., Interpretation of Moduli from Self-Boring Pressuremeter Tests in Sand, Géotechnique, issue.2, pp.39269-292, 1989.

B. , R. Ghionna, V. N. Morabito, and P. , Uniformity Tests in Calibration Chamber Samples by Thermal Probe Method, Geotechnical Testing Journal, vol.14, issue.2, pp.195-205, 1991.

B. , J. B. Canou, J. Foray, P. Pautre, and J. L. , Piezocone Testing of Liquefaction Sites : Normalization of Excess Pore Pressure, 10 World Conference of Earthquake Engineering, 1992.

I. Berrill, F. , P. Canou, and J. , Utilisation du piezocone pour l'étude de la liquéfaction des sables, 1991.

B. , A. W. Henkel, and D. J. , The Measurement of Soil Properties in the Triaxial Test, 1962.

B. , L. Kringstad, S. Kummeneje, and O. , The Shear Strength of a Fine Sand, Proc. 5 th ICSMFE, 1961.

B. , T. L. Clough, and G. W. , Methods of Sample Fabrication in the Virginia Tech Calibration Chamber, Proc. of the 1 st Internat. Symp. on Calibration Chamber Testing, pp.119-134, 1991.

B. , J. L. Cosentino, and P. J. , Pavement Design with the Pavement pressuremeter. The pressuremeter and Its Marine Applications, Third International Symposium, pp.401-414, 1990.

B. , J. L. Tucker, L. M. Makarim, and C. A. , Pressuremeter Standard and Pressuremeter Parameter, The Pressuremeter and Its Marine Applications: 2 Internat. Symp., ASTM STP 950, pp.303-323, 1986.

C. , R. G. Robertson, and P. K. , Curent Status of the Piezocone Test. Special Lecture, Proc. of ISOPT-I, pp.93-116, 1988.

C. , R. G. Robertson, P. K. Gillespie, and D. , Cone Penetration Testing in Deltaic Soil, Canadian Geotechnical Journal, vol.20, issue.l, pp.23-35, 1983.

C. , J. Dupla, J. C. Dormteux, and L. , Surpression interstitielle de fonçage mesurée au mini-piézocône dans un sable, 11 th Conf. on Soil Mechanics and Found. Engineering, 1995.

C. , J. Thorel, L. De-laure, and E. , Influence du déviateur de contrainte initial sur les caractéristiques de liquéfaction statique d'un sable, Proc. 10 th ECSMFE, pp.49-52, 1991.

C. , J. Tumay, and M. T. , Calibration and Field Evaluation of French Self-Boring Pressuremeter (PAF 76), Geotech. Report, vol.416, p.84, 1984.

C. , J. P. Booker, J. R. Yeung, and S. K. , Cavity Expansion in Cohesive Factional Soils, Géotechnique, vol.36, issue.3, pp.349-358, 1986.

C. Agrande and A. , Characteristics of Cohensionless Soils Affecting the Stability of Slopes and Earth Fills, Journal of the Boston Society of Civil Engineers, pp.13-32, 1936.

C. , G. &. Poulos, and S. J. , Factors Affecting Liquefaction and Cyclic Mobility, ASCE Journal of Geotechnical Engineering, vol.103, issue.GT6, pp.501-516, 1977.

C. , J. L. Briaud, J. L. Hughes, and J. M. , The Development of Pressuremeter Testing. The Pressuremeter and Its Marine Applications: 3 Internat, Symp, pp.25-46, 1990.

C. , I. F. Pender, and M. J. Wang-y, Cavity Expansion in Sands under Drained Loading Conditions, Internat. Jnl for Numerical, and Analytical Meth. in Geomechanics, vol.16, pp.3-23, 1992.

D. Alias, Y. F. Herrmann, and L. R. , Bounding Surface Formulation of Soil Plasticity. Soil Mechananics, Transient and Cyclic Loads, pp.253-282, 1982.

D. , L. Canou, and J. , Determination of Dynamic Characteristics of a Soil Based on a Cyclic Pressuremeter Test. The Pressuremeter and its Marine Applications: 3 d Internat, Symp, pp.159-168, 1990.

D. , B. J. Olsen, and R. S. , Soil Classification Using Electric Cone Penetrometer, Proc. Symp. on Penetration Testing and Experience, pp.209-227, 1981.

D. , B. J. Olsen, R. S. Martin, G. R. Dupla, and J. C. , Evaluation of the Cone Penetrometer Test for SPT Liquefaction Assessment Etude d'un concept : l'état caractéristique, Symp. on Penetration Testing and Experience ASCE Natinal Conv, 1981.

D. , J. C. , C. , J. Normand, P. Piffer et al., Influence du trajet de chargement sur les caractéristiques de liquéfaction d'un sable, 11 Conf. on Soil Mechanics and Found. Engineering

E. Hachem and M. , Contribution à l'étude expérimentale de la liquéfaction statique des sables lâches, 1987.

F. , M. &. Randolph, and M. F. , Effect of Disturbance on Parameters Derived from Self-Boring Pressuremeter Test in Sand, Géotechnique, issue.l, pp.3481-97, 1984.

G. , V. N. Jamiolkowski, and M. , A Critical Appraisal of Calibration Chamber Testing of Sands, Proc. 1 st Internat. Symp. on Calibration Chamber Testing, pp.13-39, 1991.

G. , H. J. Holtz, and W. G. , Research on Determining Density of Sands by Spoon Penetration Testing, Proc. 4 Internat. Conf. on Soil Mechanics and Foundation Engineering, 1957.

G. , J. Houlsby, and G. T. , Anisotropic Elasticity of Natural Clay, Géotechnique, vol.33, issue.2, pp.165-180, 1983.

H. , B. O. Drnevích, and V. P. , Shear Modulus and Damping in Soil : Design Equations and Curves, Journal of the Soil Mechanics and Foundations Division, issue.SM7, p.98, 1972.

H. , R. D. Ko-vacs, and W. D. , Introduction à la géotechnique. Traduction de Lafleur, J. de : An Introduction to Geotechnical Engineering, 1991.

H. , G. T. Clarke, B. C. Wroth, and C. P. , Analysis of the Unloading of a Pressuremeter Test, The Pressuremeter and its Marine Applications: 2 Internat. Symp., ASTM STP 950, pp.245-264, 1986.

H. , A. B. Holtz, R. A. Chameau, and J. L. , A Calibration Chamber for Cohesive Soil, Geotechnical Testing Journal, ll, issue.l, pp.30-35, 1988.

A. Huang, R. A. Holtz, and J. L. Chameau, Pressuremeter Holding Test in a Calibration Chamber. The Pressuremeter and its Marine Applications: 3 Internat, Symp, pp.253-262, 1990.

H. , A. B. Holtz, R. Chameau, and J. L. , Laboratory Study of Pressuremeter Tests in Clays, ASCE, issue.10, pp.117-1549, 1991.

H. , J. M. Wroth, C. Windle, and D. , The Pressuremeter Tests in Sands, Géotechnique, vol.27, issue.4, pp.455-472, 1977.

I. , K. Tatsuoka, I. Yasuda, and S. , Undrained Deformation and Liquefaction of Sand under Cyclic Stresses. Soils and Foundations, pp.29-64, 1975.

J. Sen and M. , On Pluvial Compaction of Sand, Report, vol.9, 1976.

J. , J. F. Le-mehaute, and A. , Essais cycliques au pressiomètre autoforeur. I e Symp. sur le pressiomètre et ses applications en mer, pp.221-233, 1982.

J. , I. Beech, and J. F. , Effective Stress Analysis of Soil Response in a Pressuremeter Test, The Pressuremeter and its Marine Applications: 2 Internat. Symp., ASTM STP 950, pp.150-168, 1986.

J. , I. Bensaid, and M. A. , Cavity Expansion Tests in a Hollow Cylinder Cell, Geotechnical Testing Journal, vol.10, issue.4, pp.203-212, 1987.

J. , I. Mahmoodzadegan, and B. , interpretation Procedure for Pressuienietef Tests in Sand, ASCE Journal of Geotechnical Engineering, vol.115, issue.11, pp.1617-1632, 1989.

L. , C. C. Foote, K. Ishthara, F. Schlosser, F. Poulos et al., Stress- Deformation and Strength Characteristics, Proc. 9 Internat. Conf. on Soil Mechanics and Foundation Engineering, pp.421-494, 1977.

L. , J. E. Schmertmann, and J. H. , Effect of Finite Pressuremeter Length in Dry Sand, Proc. of the ASCE Specialty Conference on In Situ Testing, pp.241-259, 1975.

L. Tirant and P. Sarda, Contribution à l'étude des relations contrainte-déformation des milieux pulvérulents, 1964.

L. Prestí, D. C. Berardi, R. Pedroni, and S. Crippa-v, A New Travelling Sand Pluviator to Reconstitute Specimens of Well-Graded Silty Sands, pp.18-26, 1993.

M. , E. C. Sladen, and J. A. , Observation on Static and Cyclic Sand- Liquefaction Methodologies. Revue canadienne de géotechnique, pp.650-665, 1992.

M. , M. &. Dar-ve, and F. , Réalisation et modélisation d'essais sur sable lâche : quelques résultats remarquables, pp.657-660, 1991.

M. , L. De-grenoble, J. P. Mulilis, H. B. Seed, C. K. Chan et al., Simulation physique du comportement des pieux à grande profondeur en chambre de calibration Effect of Sample Preparation on Sand Liquefaction, Thèse de l'Institut national polytechnique Journal of the Soil Mechanics and Foundations Division, pp.91-108, 1977.

N. , P. L. Allely, and B. H. , Volume Change During Undrained Triaxial Tests on Satured Dilatant Granular Materials, Géotechnique, vol.9, issue.4, pp.174-182, 1959.

N. , R. Wood, and D. N. , A Constitutive Model for Sand in Triaxial Compression, Int. J. Numer. Anal. Methods Geomech, vol.3, pp.225-278, 1979.

P. , M. Zienkiewicz, 0. C. Leung, and K. H. , Simple Model for Transient Soil Loading in Earthquake Analysis II. Non-Assoiciative Models for Sands, Intern. Journ. of Numerical and Analytical Methods in Geomechanics, vol.9, pp.477-498, 1985.

P. , S. J. Castro, G. &. France, and J. W. , Liquefaction Evaluation Procedure, ASCE Journal of Geotechnical Engineering, vol.111, issue.6, pp.772-791, 1985.

R. and N. S. Tumay-m, Factors Affecting Sand Specimen Preparation by Raining, Geotechnical Testing Journal, vol.10, issue.l, pp.31-37, 1987.

R. , K. V. Raju, V. S. Renoud-lias, and B. , Membrane Penetration in Triaxial Tests, ASCE Journal of the Soil Mechanics and Foundations Division, vol.108, issue.GT2, p.420, 1978.

R. , P. K. Campanella, and R. G. , Evaluation of Liquefaction Potential Using the Cone Penetration Test. Soil Mechanics Series, Report of Civil Engin, vol.64, 1983.

R. , P. K. , &. Campanella, and R. G. , Guidelines for Uses and Interpretation of the Electric Cone Penetration Test, Canada, 1984.

R. , P. K. Campanella, and R. G. , Liquefaction Potential of Sands Using the CPT, ASCE Journal of the Soil Mechanics and Foundations Division, vol.111, issue.3, pp.384-403, 1985.

S. , A. Canou, J. Dupla, J. , D. et al., Application of a Generalized Elastoplastic Constitutive Model to the Simulation of Sand Behaviour, Proc. NUMOG IV, Swansea (U.K.), pp.73-83, 1992.

S. , F. , F. Houlsby, and G. T. , Eléments de mécanique des sols Calibration Chamber Tests of the Cone-Pressuremeter in Sand. The pressuremeter and its Marine Applications: 3 Internat, Presses des Ponts et Chaussées SCHNAID Symp, pp.263-272, 1988.

A. Schofield and P. Wroth, Critical State Soil Mechanics, 1968.

S. , E. Dormieux, and L. , Liquefaction Due to Expansion of a Cylindric Cavity, 1985.

S. and H. B. De-alba, Use of SPT and CPT for Evaluating the Liquefaction Resistance of Sands, Proc. Symp. on the Use of In Situ Tests in Geotechnical Engin, pp.281-302, 1986.

S. , H. B. Idriss, I. M. Arango, and I. , Evaluation of Liquefaction Potential Using Field Performance Data, ASCE Journal of Geotechnicai Engineering, vol.109, issue.3, pp.458-482, 1983.

S. , H. B. Lee, and K. L. , Liquefaction of Satured Sands During Cyclic Loading, ASCE, issue.SM6, pp.92-105, 1966.

S. , J. A. D-'hollander, R. D. Krahn, and J. , The Liquefaction of Sands, a Collapse Surface Approach, Canadian Geotechnicai journal, vol.22, issue.4, pp.564-578, 1985.

S. , J. A. Handford, and G. , A Potential Systematic Error in Laboratory Testing of Very Loose Sands, Canadian Geotechnicai Journal, vol.24, pp.462-466, 1987.

S. , B. P. Clough, and G. W. , Design of a Large Calibration Chamber, Geotechnicai Testing Journal, vol.13, issue.l, pp.36-44, 1990.

T. , F. Iwasaki, T. Tokida, K. , Y. et al., A Method for Estimating Undrained Cyclic Strength of Sandy Soils Using Standard Penetration Resistance, Soils and Foundations, vol.18, issue.3, pp.43-58, 1978.

T. , F. Iwasaki, T. Tokida, K. , Y. et al., Standard Penetration Tests and Soil Liquefaction Potentiel Evaluation, Soils and Foundations, vol.20, issue.4, pp.95-111, 1980.

T. M. Vaid, Y. P. Chern, and J. C. , Field Calibration of Electric Cone Penetrometers in Soft Soils Executive Summary -Report n° FHWA, Mechanism of Deformation During Cyclic Undrained Loading of Satured Sands. Soil Dynamic and Earthquake Engineering, pp.171-177, 1983.

Y. P. Vaid, E. K. Chung, and R. H. Kuerbis, Stress path and steady state, Canadian Geotechnical Journal, vol.27, issue.1, pp.1-7, 1990.
DOI : 10.1139/t90-001

R. L. Verdugo, Characterization of Sandy Soil Behavior under Large Deformation, 1992.

R. L. Verdugo, Discussion : The Critical State of Sand, Géotechnique, vol.42, issue.4, pp.655-663, 1992.

W. , C. P. Hughes, and J. M. , An Instrument for the In Situ Measurement of the Properties of Soft Clays, Proc. 8 th Conf. SMFE, Moscow, pp.487-494, 1973.

W. , C. , P. Windle, and D. , Analysis of the Pressuremeter Test Allowing Volume Change, Géotechnique, vol.25, issue.3, pp.598-604, 1975.

Y. , H. S. Houlsby, and G. T. , Finite Expansion in Dilatant Soils: Loading Analysis, Géotechnique, vol.41, issue.2, pp.173-183, 1991.

S. G. Zhou, Influence of Fines on Evaluation of Liquefaction of Sand by SPT, Proc. 7 th World Conf. on Earthquake Engin., Istanbul, 1981.

. Internat and . Conf, on Recent Advances in Earthquake Engin, and Soil Dynamics, pp.167-172

Z. , 0. C. Leung, K. H. Pastor, and M. , Simple Model for Transient Soil Loading in Earthquake Analysis I.Basic Model and its Application, Intern. Journal of Numerical and methods in Geomechanics, vol.9, pp.453-470, 1985.