. Enfin, intégrer dans un code de calcul industriel, la maille multiparticulaire pour les plaques sandwichs classiques et la maille élément-fini du modèle de plaque équivalent du chapitre IV pour les structures en composite alvéolaire. Ceci permettrait de mettre à la disposition des bureaux d'études, des outils éléments-finis

H. G. Allen and S. A. Ambarsumyan, Analysis and design of structural sandwich panels, K tieorii izgiba anisotropnvch plasinok, pp.69-77, 1958.

S. Antonelli, «Industrialisation d'un plancher alvéolaire carbone, 1995.

J. Azar, Bending theory for multilayer orthotropic sandwich plates., AIAA Journal, vol.6, issue.11, pp.2155-2169, 1968.
DOI : 10.2514/3.4950

J. F. Carón, « Fissuration transverse des matériaux composites, Thèse de Doctorat, Ecole Nationale des Ponts et Chaussées, 1993.

R. P. Carreira, « Fissuration transverse et initiation du délaminage dans les stratifiés sous sollicitations de plaque, Thèse de Doctorat, Ecole Nationale des Ponts et Chaussées (en cours), 1998.

A. Chabot, «Analyse des efforts à l'interface entre les couches des matériaux composites à l'aide de Modèles Multiparticulaires de Matériaux Multicouches (M4), Thèse de Doctorat, Ecole Nationale des Ponts et Chaussées, 1997.

S. Cheng, « On the theory of bending of plates, Proceedings of the 4 ! U.S. National Congress of A.M, pp.511-518, 1962.

H. J. Chen and S. W. Tsai, Analysis and Optimum Design of Composite Grid Structures, Journal of Composite Materials, vol.18, issue.4, p.4, 1996.
DOI : 10.1177/002199839603000405

J. C. Graveur, « Modélisation des structures -Calcul par éléments-finis, 1996.

C. F. Giménez, Tendance future dans la conception des structures soudées pour les véhicules ferroviaires de grande vitesse », Conception et calcul pour les construction soudées, 1992.

J. N. Goodier and I. M. Et-neou, « The evaluation of theoritical critical compression in sandwich plates, J. Aero, Sei, vol.18, pp.10649-657, 1951.

P. R. Head, Design methods and bridge forms for the cost effective use of advanced composites in bridges », l ere conférence internationale sur les Matériaux composites d'avant-garde pour ponts et charpentes, pp.15-30, 1992.

W. G. Heath, Correlation and extension of existing theory of flat panels subjected to lenghtwise compression », Aircraft eng, Sandwich construction, pp.186-205, 1960.

G. Inglebert, « Résistance des matériaux classique -Théorie des poutres », Cours de résistance des matériaux, chapitre IX, pp.ISMCM-CESTI, 1989.

G. Inglebert, « Instabilité élastique -Flambement de structures », Cours de résistance des matériaux, chapitre XI, 1989.

P. Kujala, A. Metsä, and M. Nallikari, « All metal sandwich panels for ship applications: shipyard 2000, spin-off project, US department of commerce -National technical information service, 1995.

L. Conte and C. , « Dimensionnement d'un plancher en matériaux composite alvéolaire en vue d'une application pour véhicules ferroviaires, 1994.

M. Levinson, An accurate, simple theory of the statics and dynamics of elastic plates, Mechanics Research Communications, vol.7, issue.6, pp.343-350, 1980.
DOI : 10.1016/0093-6413(80)90049-X

L. Huillier and P. , « Développement et industrialisation d'un plancher intermédiaire en matériaux composites pour TGV 2N, 1996.

B. C. Liaw and R. W. Et-little, Theory of bending multi-layer sandwich plates., AIAA Journal, vol.5, issue.2, pp.301-304, 1969.
DOI : 10.2514/3.3956

C. Libove and S. B. Et-batdorf, « A general small-deflection theory for flat sandwich plates, 1948.

L. Librescu and J. N. Et-reddy, A few remarks concerning several refined theories of anisotropic composite laminated plates, International Journal of Engineering Science, vol.27, issue.5, pp.5515-527, 1989.
DOI : 10.1016/0020-7225(89)90004-9

K. H. Lo, R. M. Christensen, and E. M. Wu, « A high-order theory of plate deformation », Part 1: Homogeneous Plate; Part 2: Laminated Plates, J. Appl, Mech., Trans ASME, vol.44, pp.4663-676, 1977.

B. Macquire, E. Petitpas, and D. Valentin, 1977, « Experimental and theoritical damage accumulation in glass-epoxy tubes under torsion loading, Composites Polymers, vol.5, p.3

E. Maréchal, « Modélisation des structures sandwichs par éléments-finis, p.14, 1989.

E. Maréchal, Modélisation de poutres sandwich soumises à flexion quatre points, Etude comparée de différentes techniques de modélisation », Compte-rendus des 5 eme journées de l'INERN, 1990.

R. D. Mindlin, Influence of Rotatory Inertia and Shear on Flexural Motions of Isotropic, Elastic Plates, J. Apl. Mech, vol.18, pp.31-38, 1951.
DOI : 10.1007/978-1-4613-8865-4_29

A. K. Mukhopadhyay and R. L. Et-sierakowski, On Sandwich Beams with Laminate Facings and Honeycomb Cores Subjected to Hygrothermal Loads: Part II-Application, Journal of Composite Materials, vol.24, issue.4, pp.382-418, 1990.
DOI : 10.1177/002199839002400403

A. K. Mukhopadhyay, R. L. Sierakowski, and Y. Y. Yu, On Sandwich Beams with Laminate Facings and Honeycomb Cores Subjected to Hygrothermal and Mechanical Loads: Part III-Timoshenko Beam Theory, Journal of Composite Materials, vol.27, issue.61, pp.1057-1075, 1994.
DOI : 10.1177/002199839402801104

H. Murakami, Laminated Composite Plate Theory With Improved In-Plane Responses, Journal of Applied Mechanics, vol.53, issue.3, pp.3661-666, 1986.
DOI : 10.1115/1.3171828

M. V. Murthy, An improved transverse shear deformation theory for laminated anisotropic plates, pp.1-37, 1903.

T. Naciri and M. H. Philippe, Comparison of the alveolar composite technology for the production of intermediate floors of TGV cars, Congrès mondial de la Recherche ferroviaire '94 (WCRR94), 1994.

R. B. Nelson and D. R. Lorch, A Refined Theory for Laminated Orthotropic Plates, Journal of Applied Mechanics, vol.41, issue.1, pp.177-183, 1974.
DOI : 10.1115/1.3423219

D. R. Owen, . Et, and Z. H. Li, « A Refined Analysis of Laminated Plates by Finite Element Displacement Methods -I, Fundamentals of Static Analysis, IL Vibration and Stability, Computers Struc, vol.26, pp.6907-923, 1987.

N. J. Pagano, Exact Solutions for Composite Laminates in Cylindrical Bending, Journal of Composite Materials, vol.1, issue.3, pp.398-411, 1969.
DOI : 10.1177/002199836900300304

N. J. Pagano, Exact Solutions for Rectangular Bidirectional Composites and Sandwich Plates, Journal of Composite Materials, vol.7, issue.1, pp.20-34, 1970.
DOI : 10.1177/002199837000400102

M. H. Philippe, T. Naciri, and A. Ehrlacher, « Design of composite hollow-core panels, Proceedings of the Composite Institute's 51 st Annual Conference and EXPO '96, Session 6-E, Cincinnati (OH), 1996.

M. E. Raville, Deflection and stresses in a uniformly loaded, simply-supported, rectangular sandwich plate, p.1847, 1955.

J. N. Reddy, A Simple Higher-Order Theory for Laminated Composite Plates, Journal of Applied Mechanics, vol.51, issue.4, pp.745-752, 1984.
DOI : 10.1115/1.3167719

S. Srinivas, A. K. Rao, and . Bending, Bending, vibration and buckling of simply supported thick orthotropic rectangular plates and laminates, International Journal of Solids and Structures, vol.6, issue.11, pp.1463-1481, 1970.
DOI : 10.1016/0020-7683(70)90076-4

S. Srinivas, A refined analysis of composite laminates, Journal of Sound and Vibration, vol.30, issue.4, pp.495-507, 1973.
DOI : 10.1016/S0022-460X(73)80170-1

C. Sun and J. M. Et-whitney, Theories for the Dynamic Response of Laminated Plates, AIAA Journal, vol.11, issue.2, pp.178-183, 1973.
DOI : 10.2514/3.50448

S. P. Timoshenko, « Résistance des matériaux. Tome I: Théorie élémentaire et problèmes, 1968.

M. Touratier, A refined theory for thick composite plates, CRAS, t.309, Série II, pp.933-938, 1989.
DOI : 10.1016/0093-6413(88)90016-X

V. Voorhees, E. J. Et-green, and D. J. , Mechanical Behavior of a Ceramic Sandwich Composite System, Journal of Composite Materials, vol.31, issue.11, pp.1664-1677, 1992.
DOI : 10.1177/002199839202601106

J. M. Whitney, Stress Analysis of Thick Laminated Composite and Sandwich Plates, Journal of Composite Materials, vol.10, issue.3, pp.426-440, 1972.
DOI : 10.1177/002199837200600301

J. M. Whitney and N. J. Et-pagano, Shear Deformation in Heterogeneous Anisotropic Plates, Journal of Applied Mechanics, vol.37, issue.4, pp.4-1031, 1970.
DOI : 10.1115/1.3408654

P. C. Yang, C. H. Norris, and Y. Et-stavsky, Elastic wave propagation in heterogeneous plates, Elastic Wave Propagation in Heterogeneous Plates, pp.665-684, 1966.
DOI : 10.1016/0020-7683(66)90045-X