M. Fafard, G. Dhatt, and J. L. Batoz, A new discrete Kirchhoff plate/shell element with updated procedures, computers and structures, pp.591-606, 1989.
DOI : 10.1016/0045-7949(89)90336-2

B. Fauchet, Analyse poroplastique des barrages en béton et de leurs fondations Rôle de la pression interstitielle, Thèse de doctorat, 1991.

G. Fézans, Analyse linéaire et non-linéaire géométrique des coques par éléments finis isoparamétriques tridimensionnels dégénérés, 1981.

P. L. Gould, Analysis of shells and plates, 1987.
DOI : 10.1007/978-1-4612-3764-8

J. Guggenberger, Analyse non-linéaire des poutres précontraintes, 1992.

F. R. Hand, D. A. Pecknold, and W. C. Schnobrich, Nonlinear layered analysis of RC plates and shells, ASCE Journal of structural division, vol.99, pp.1491-1503, 1973.

T. K. Hellen, An assessment of the semiloof shell element, International Journal for Numerical Methods in Engineering, vol.8, issue.1, pp.133-151, 1986.
DOI : 10.1002/nme.1620220110

H. Hencky, Zur théorie plastisher deformationen und der hierdurch in material hervorgernufunen nebenspannungen, Proceeding of the first international congress on applied mechanics, J. Waltman edition, 1924.

H. Hu and W. C. Schnobrich, Constitutive modelling of concrete by using nonassociated plasticity, J.mater.civ.eng. ASCE, issue.1, pp.199-216, 1989.

H. Hu and W. C. Schnobrich, Nonlinear analysis of cracked reinforced concrete, ACI struct. Jnl, vol.87, pp.199-207, 1990.

H. Hu and W. C. Schnobrich, Nonlinear finite element analysis of reinforced concrete plates and shells under monotonic loading, Computers & Structures, vol.38, issue.5-6, pp.637-651, 1991.
DOI : 10.1016/0045-7949(91)90015-E

P. Humbert, CESAR-LCPC : Un code général de calculs par elements finis, Bulletin de liaison des Laboratoires des Ponts et Chaussées, pp.112-116, 1989.

H. P. Huttelmaier and M. Epstein, A finite element formulation for multilayered and thick plates, computers and structures, vol.16, issue.5, pp.645-650, 1983.

H. P. Huttelmaier and M. Epstein, A finite element formulation for multilayered and thick shells, Computers & Structures, vol.21, issue.6, pp.1181-1185, 1985.
DOI : 10.1016/0045-7949(85)90173-7

B. Irons and . Ashwell, The semi-loof shell elements, in finite elements for thin shells and curved members, pp.197-222, 1976.

B. Irons, S. E. Ahmad, and . Horwood, Techniques of finite elements, 1980.

. Itech, CESAR-LCPC, la référence en génie civil, Plaquette de présentation éditée par la société ITECH, 1997.

S. Jaamei, Etude de différentes formulations lagrangiennes pour l'analyse non-linéaire des plaques et coques minces elasto-plastiques en grands déplacements et grandes rotations, 1986.

L. Jiang and M. W. Chernuka, A co-rotational formulation for geometrically nonlinear analysis of spatial beams, Trans. CSME, vol.18, pp.65-88, 1994.

L. Jiang and M. W. Chernuka, A simple four noded co-rotational shell element for arbitrarily large rotation, computers and structures, pp.1123-1132, 1994.

B. Koziey and F. A. Mirza, Consistent thick shell element, Computers & Structures, vol.65, issue.4
DOI : 10.1016/S0045-7949(96)00414-2

J. Lemaitre and J. L. Chaboche, Mécanique des matériaux solides, 1985.

P. Li and Z. D. Chen, The updated co-moving coordinate formulation of continuum mechanics based on the S-R decomposition theorem, comput. meth. appl. mech. eng, vol.114, pp.21-34, 1994.

C. Lin and A. C. Scordelis, Nonlinear analysis of RC shells of general form, ASCE Journal of structural division, vol.101, pp.523-538, 1975.

J. Lubliner, S. Oiler, J. Oliver, and E. Oñate, A plastic-damage model for concrete, International Journal of Solids and Structures, vol.25, issue.3, pp.299-326, 1989.
DOI : 10.1016/0020-7683(89)90050-4

J. Magnan, M. Ph, E. Leca, P. Humbert, . Mai et al., Expérimentations et modélisation en géotechnique au LCPC : 30 ans de comparaison entre comportements observés et calculésA return mapping algorithm for isotropic elastoplasticity, Xveme rencontres universitaires de Génie civil EC'97, pp.22-23, 1994.

J. Mazars, Application de la mécanique de l'endominagement au comportement non linéaire et à la rupture du béton de structures, Thèse de doctorat, 1984.

A. Millard, J. M. Reynouard, and O. Merabet, Structural analysis of reinforced concrete structures under monotonous and cyclic loading : numerical aspect, Transactions of the SMIRT 10th Conf, 1989.

A. Millard, D. R. In, E. Owen, E. Oñate, and . Hinton, Numerical algorithms for plane stress elastoplasticity : Review and recommendation, pp.237-247, 1995.

S. Oiler, Un modelo de daño continuo para materiales fricciónales, Thèse de doctorat, 1988.

E. Oñate, J. Oliver, and G. Bugeda, Finite element analysis of nonlinear response of concrete dams subject to internal loads", Europe-US symposium on finite element methods for nonlinear problems, 1986.

E. Oñate, S. Oller, J. Oliver, and J. Lubliner, A fully elastoplastic constitutive model nonlinear analysis of concrete, Proc. second Int. Conf. advances methods in numerical methods in engineering, Theory and applications-NUMETA, Martinus Nijhoff, 1987.

E. Oñate, S. Oiler, and J. Lubliner, A constitutive model cracking of concrete based on the incremental theory of plasticity, Proc. Int. Conf. computational plasticity, Part 2, pp.1311-1327, 1987.

E. Oñate, S. Oiler, and J. Lubliner, A constitutive model of concrete based on the incremental theory of plasticity, Eng.comput, vol.5, issue.4, 1988.

E. Oñate, Lectures on nonlinear finite element analysis of concrete shells, Centro internacional de métodos numéricos en ingeniería, 1992.

D. R. Owen and J. A. Figueiras, Elasto-plastic analysis of anisotropic plates and shells by the Semiloof element, International Journal for Numerical Methods in Engineering, vol.17, issue.4, pp.521-539, 1983.
DOI : 10.1002/nme.1620190406

D. R. Owen and J. A. Figueiras, Anisotropic elasto-plastic finite element analysis of thick and thin plates and shells, International Journal for Numerical Methods in Engineering, vol.13, issue.4, pp.541-566, 1983.
DOI : 10.1002/nme.1620190407

D. R. Owen and J. A. Figueiras, Ultimate load analysis of reinforced concrete plates and shells", In finite element software for plates and shells, 1984.

S. C. Panda and R. Natarajan, Finite element analysis of laminated composite plates, International Journal for Numerical Methods in Engineering, vol.2, issue.1, pp.69-79, 1979.
DOI : 10.1002/nme.1620140106

S. C. Panda and R. Natarajan, Analysis of laminated composite shell structures by finite element method, Computers & Structures, vol.14, issue.3-4, pp.225-230, 1981.
DOI : 10.1016/0045-7949(81)90008-0

X. Peng and M. A. Crisfield, A consistent co-rotational formulation for shells using the constant stress/constant moment triangle, International Journal for Numerical Methods in Engineering, vol.3, issue.18, pp.1829-1847, 1992.
DOI : 10.1002/nme.1620350907

R. Kumar, R. , S. Rao, and Y. V. , Free vibrations of multilayered thick composite shells, computers and structures, pp.717-722, 1988.
DOI : 10.1016/0045-7949(88)90410-5

C. C. Rankin and F. A. Brogan, An Element Independent Corotational Procedure for the Treatment of Large Rotations, Journal of Pressure Vessel Technology, vol.108, issue.2, pp.165-174, 1986.
DOI : 10.1115/1.3264765

A. Razzaque, Thin shell analysis : semiloof vs underintegrated thick shell element", New and future developments in commercial finite element method, pp.407-421, 1981.

P. Rossi, Influence of cracking in the presence of free water on the mechanical behaviour of concrete, Magazine of concrete research, pp.53-57, 1991.
DOI : 10.1680/macr.1991.43.154.53

P. Rossi, A physical phenomenon which can explain the mechanical behaviour of concrete under high strain rates, Materials and structures, pp.422-424, 1991.
DOI : 10.1007/BF02472015

J. C. Schellekens, D. Borst, and R. , The use of the Hoffman yield criterion in finite element analysis of anisotropic composites, computers and structures, pp.1087-1096, 1990.
DOI : 10.1016/0045-7949(90)90020-3

A. Selmane and A. A. Lakis, INFLUENCE OF GEOMETRIC NON-LINEARITIES ON THE FREE VIBRATIONS OF ORTHOTROPIC OPEN CYLINDRICAL SHELLS, International Journal for Numerical Methods in Engineering, vol.6, issue.6, pp.1115-1137, 1997.
DOI : 10.1002/(SICI)1097-0207(19970330)40:6<1115::AID-NME105>3.0.CO;2-H

J. Sercombe, F. J. Im, and F. Toutlemonde, Modélisation du béton en dynamique rapide", 4 eme colloque national de génie parasisrnique, AFPS, Saint-Rémy-lès-chevreuse, France, pp.10-12, 1996.

J. Sercombe, F. J. Ulm, and F. Toutlemonde, Modelling of concrete in high rate dynamics, Third European Conference on Strutural Dynamics, EURODYN'96, pp.5-8, 1996.

J. Sercombe, F. J. Ulm, and F. Toutlemonde, Viscous Hardening Plasticity for Concrete in High-Rate Dynamics, eme International Conference on Computational plasticity, 1997.
DOI : 10.1061/(ASCE)0733-9399(1998)124:9(1050)

J. Sercombe, Modélisation du comportement du béton en dynamique rapide : Application au calcul des conteneurs à haute intégrité, Thèse de doctorat, 1997.

J. C. Simo and T. J. Hughes, Elastoplasticity and viscoplasticity, 1986.

C. T. Tsai and A. N. Palazotto, On the finite element analysis of non-linear vibration for cylindrical shells with high-order shear deformation theory, International Journal of Non-Linear Mechanics, vol.26, issue.3-4, pp.379-388, 1991.
DOI : 10.1016/0020-7462(91)90067-4

F. J. Ulm, Modélisation élastoplastique avec endommagement du béton de structures, Thèse de doctorat, 1994.

G. Wempner, Finite elements, finite rotations and small strains of flexible shells, International Journal of Solids and Structures, vol.5, issue.2, pp.117-153, 1969.
DOI : 10.1016/0020-7683(69)90025-0

K. J. Willam and E. P. Warnke, Constitutive model for thr axial behavior of concrete", International Association of Bridge and Structural Engineers, Seminar on Concrete Structures subjected to triaxial stresses, paper HJ-l, 1975.

S. M. Yunus, P. C. Kohnka, and S. Saigal, An efficient through-thickness integration scheme in an unlimited layer doubly curved isoparametric composite shell element, International Journal for Numerical Methods in Engineering, vol.110, issue.12, pp.2777-2793, 1989.
DOI : 10.1002/nme.1620281205

A. Beakou and M. Touratier, A rectangular finite element for analysing composite multilayered shallow shells in statics, vibration and buckling, International Journal for Numerical Methods in Engineering, vol.42, issue.4, pp.627-653, 1993.
DOI : 10.1002/nme.1620360406

J. P. Boehler, Loi de comportement anisotrope des milieux continus, J. de mécanique, vol.17, issue.2, pp.153-190, 1978.

H. D. Bui and J. Zarka, Fondements expérimentaux et modèles pour l'étude du comportement global des métaux, plasticité et viscoplasticité, pp.1-20, 1972.

C. J. Burgoyne and M. A. Crisfield, Numerical integration strategy for plates and shells, International Journal for Numerical Methods in Engineering, vol.17, issue.1, pp.105-121, 1990.
DOI : 10.1002/nme.1620290108

G. Dhatt and G. Touzot, Une présentation de la méthode des éléments finis, 1984.

G. Dhatt, L. Marcotte, and Y. Matte, A new triangular discrete Kirchhoff plate/shell element, International Journal for Numerical Methods in Engineering, vol.14, issue.3, pp.453-470, 1986.
DOI : 10.1002/nme.1620230310

T. Fejér, Anisotropic plasticity features of steel-mat reinforcement in concrete plates and shells, 1997.

B. Halphen and J. Salençon, Elasto-plasticité, 1987.

R. Hill, A theory of the yielding and plastic flow of anisotropic materials, Proc. R. Soc, A 193, pp.281-297, 1947.

R. Hill, The mathematical theory of plasticity, 1950.

H. Hu and W. C. Schnobrich, Nonlinear finite element analysis of reinforced concrete plates and shells under monotonic loading, Computers & Structures, vol.38, issue.5-6, pp.637-651, 1991.
DOI : 10.1016/0045-7949(91)90015-E

T. Hueckel and R. Nova, Anisotropic failure criteria for geotechnical materials, recent trends, failure criteria of structured media, 1983.

D. Hyafil and . Escatha, Cours de plasticité, ENSTA

S. W. Lee, C. C. Dai, and C. H. Yeom, A triangular finite element for thin plates and shells, International Journal for Numerical Methods in Engineering, vol.19, issue.10, pp.1813-1831, 1985.
DOI : 10.1002/nme.1620211008

C. Liao and J. S. Tsai, Partial mixed 3-D element for the analysis of thick laminated composite structures, International Journal for Numerical Methods in Engineering, vol.24, issue.7, pp.1521-1539, 1992.
DOI : 10.1002/nme.1620350709

C. Lin and A. C. Scordeiis, Nonlinear analysis of RC shells of general form, ASCE Journal of structural division, vol.101, pp.523-538, 1975.

B. Loret, Elastoplasticité à simple potentiel", Manuel de rhéologie des matériaux, sous la direction de Felix Darve, 1987.

J. Lubliner, S. Oliver, J. Oñate, and E. , A plastic-damage model for concrete, International Journal of Solids and Structures, vol.25, issue.3, pp.299-326, 1989.
DOI : 10.1016/0020-7683(89)90050-4

O. Merabet, Modélisation des structures planes en béton armé sous chargements monotone et cyclique. Construction et validation d'un modèle numérique, Thèse de doctorat, 1990.

P. Mestat, Progammation des lois de comportement mécanique dans le code de calcul par éléments finis CESAR-LCPC, 1992.

P. Mestat, Lois de comportement des géomatériaux et modélisation par la méthode des éléments finis, Collection; Etudes et Recherches des Laboratoires des Ponts et Chaussées, série géotechnique GT52, 1993.

L. S. Morley, Finite element criteria for some shells, International Journal for Numerical Methods in Engineering, vol.38, issue.9, pp.1711-1728, 1984.
DOI : 10.1002/nme.1620200914

A. K. Noor, Mechanics of anisotropic plates and shells???A new look at an old subject, Computers & Structures, vol.44, issue.3, pp.499-514, 1992.
DOI : 10.1016/0045-7949(92)90383-B

M. Ortiz and J. C. Simo, An analysis of a new class of integration algorithms for elastoplastic constitutive relations, International Journal for Numerical Methods in Engineering, vol.51, issue.3, pp.353-366, 1986.
DOI : 10.1002/nme.1620230303

M. Prat, P. Bisch, P. Mestat, A. Millard, and G. Pijaudier-cabot, Calcul des ouvrages généraux de construction, 1997.

W. P. Prema-kumar and R. Palaninathan, Finite element analysis of laminated shells with exact through-thickness integration, Computers & Structures, vol.63, issue.1, pp.173-184, 1997.
DOI : 10.1016/S0045-7949(96)00297-0

A. Ricard, Etude des massifs continus à comportement non-linéaire, 1975.

J. Salençon, YIELD-STRENGTH OF ANISOTROPIC SOILS, C. R. 16ème congrès Int. Mec. Th. Appl. Lyngby, 1984.
DOI : 10.1016/B978-0-444-87707-9.50029-4

P. Seide and R. A. Chaudhuri, Triangular finite element for analysis of thick laminated shells, International Journal for Numerical Methods in Engineering, vol.2, issue.8, pp.1563-1579, 1987.
DOI : 10.1002/nme.1620240812